Installation annoyance

I realize that this problem has come about many times but I still need help getting this resolved.
So I just wrote my whole thing out here, but the attachment was too large so it erased all out it. So Ill give you my info and the problem I'm facing quickly.
I run a Windows based computer with XP SP3. I am having trouble installing Adobe Master Collection CS4 and I get the, "Critical errors were found in setup..." problem.
I tried to uninstall Adobe Photoshop CS3 but it couldn't for some reason so I used the Adobe CS3 Clean utility. Than I manually took out the rest of the regestry and files on my hard drive. I tried to install CS4 again but it still doesn't work. I have the CD, I did not download the Master Collection via interent.
Thanks so much for any info provided.
I will upload the log file in a sec.

Okay while there was an Adobe Setup 2.0 which I erased via WIndows Installer Clean Up - The installation still doesn't work.
http://www.megaupload.com/?d=MIY553RO
I erased the previous logs, ran both the CS3 and CS4 Clean utilites from Adobe and Windows Installer Clean Up (For Adobe Setup 2.0 or any other Adobre programs). THis is the new log, witht he same error.
I really appreciate the help Mylenium. I will continue to look for a solution.

Similar Messages

ITunes 7 and Quicktime shortcut reinstallation annoyance

Whenever I move my Start menu shortcuts (e.g. from the root to the AUDIO submenu) I get a "Please wait while Windows configures Quicktime." and the **** thing reinstalls the shortcuts in the Start Menu, the desktop, and the quickstart bar. I don't want these icons, why can't I put them where I want. Quicktime/Itunes 7 are the only programs that do this. The previous version that I used was ok.

Thanks.
I deleted the nonstandard Quicktime/iTunes shortcuts.
I created new shortcuts pointing to iTunes.exe and Quicktime.exe.
I put the shortcuts where I wanted in the Start Menu submenu and.
The shortcuts now work normally, and no reinstallation takes place when I launch Quicktime or iTunes.
Now I'm moving on to other installation annoyances: getting rid of that QTTASK, getting rid of iPodService (I don't have an iPod), getting rid of QtHelper.

HT204074 I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even I authorized the machine to my Apple ID, I can not connecto to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed.

I have a new machine with a previous installation of Itunes, linked to another Apple ID. Even I authorized the machine to my Apple ID, I can not connect to the Apple Store. I tried removing Itunes and reinstalling it, but anything changed. I still can not connecto to the Store.
My previous machine has Itunes Installed, and I deauthorized the machine so I unlinked to my Apple ID, if this is correct.
Anyway, Dropbox is also not connecting....so I do not know how to make it woek. please help!

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

None of the Creative Applications are installi

I have tried numerous times to install both Alchemy and Console Launcher with no luck. Every time it gets the the install screen it says "Please insert disc and locate Layout.bin." Does anyone know why this keeps happening. I have tried both the Oct and Nov releases of the Vista 32-bit driver.
Core 2 Duo 6600
2Gig Ram
8800 GTS 320MB
EVGA 650i motherboard
Creative X-Fi XtremeMusic

Well, I think the problem with this has to do with the fact that I changed my system variables for TMP and TEMP. The installer uses the WRONG paths and defaults to extracting the files into the C:\Windows\Temp, while my actual TEMP directory resides on a different dri've and path logically causing the installer to reference a non-existent "layout.bin".
Creative, please fix this problem! Its a annoying one but I seem to get it in just about EVERY driver I download causing a lot of annoyance.

"Save for Web & Devices" Huge BUG and major annoyance!

Photoshop CS3
I am so tired of losing all of my work for this bug it isn't even funny! It doesn't lock up Photoshop but does make it impossible to save anything including all the currently cropped and resized images open in PS. It forces you to lose hours of work in some cases which is what just now happened and I want something done with this since it is probably the biggest annoyance from a BUG of all the adobe products ever.
To replicate this bug:
Open an image, any image.
Go to File and Choose "Save for Web & Devices".
Once the "Save for Web & Devices" dialog box is open choose save, BUT here is the bug, after the Save As dialog box appears choose cancel to go back to the open and now useless "Save for Web & Devices".
Attempt to now close the "Save for Web & Devices" dialog box.
The issue is it won't close once I cancel after choosing save from the "Save for Web & Devices" dialog. I cannot resize the window or do anything in PS when this happens since it takes complete focus. I cannot close the box or choose from most of the options on the right since now at this point they'll all be blank.
This has happened before and I had learned to save no matter what to avoid this but just forgot and am once again about to lose HOURS of work because of it...
I have searched and searched and cannot find a separate process to close in device manager to stop just it (which is lame). All I can do is close PS and say good bye to everything I had already done.
Of course I would like a solution to this and a fix but having owned Adobe products for years know this is highly unlikely and to get a fix you must buy the new version (pathetic). So, I will settle for yet another hopeful work around to get around this idiotic BUG.
EDIT: I have rebuilt my preferences countless times (since that seems to be needed for so many of Adobe's products issues) as well as complete resinstalls of the CS3 Production Premium Suite to no avail. I have dealt with this issue for several years and several new installs. I have an aviation forum and people have been able to replicate this on theirs installs as well, to include one CS4 user.
Message was edited by: Danbo342

Thanks Noel, and others.
I have listened to people. In fact read my second post. It was seeing the 1st two that couldn't duplicate the error get on the phone to a friend in Germany that was able to duplicate it. I then came back here and shared what my suspicions were of the Matrox unit. The other person able to duplicate the issue has yet to return to the forum for me to further check with (I guess some people sleep).
To be clear here. I have owned CS3 since it's release. I have built myself several computers since I bought it and this one is actually the third since then. This particular issue though was never seen until a few months ago since I seldomly use the Save for Web for saving files and just started using it on my latest flash site.
As for video cards. This card I am using is my 3rd. My GTX 260 was great but being having other joys of the PC I also always kept up with the latest and greatest cards so thus came my last purchase of the GTX295 before the newer ones hit. Point being, the issue is most likely my Trip2GO and plan on testing when I get home and get it ripped apart. I do web design on the side which is one reason the trip2Go for my home workstation. The other point is that I do a LOT more than Adobe work and my card needs to be high end and not some cheap card just to make my suite work. Maybe in the future I'll make another comp,,, one for every other product I own and then one just for Adobe's products.
Now as for tech support and myself. I am A+ certified. I am certified in every OS since Dos 6 and a hardware engineer. I do tech support, have 3 support forums and 11 web site, all primarily based on support. My comments above were not about getting mean, it is because Adobe support in general is one of the worst that I have ever had the misfortune to deal with and strongly disagree with the way they cut support and updates to a year old product (that's when no more patches came out I meant and known bugs were written off for the next version). To say try a new video card to me is like a supposed "tech" to say reinstall your OS, or like here reading people say (what I originally said I did) about clearing the preferences. Sure, this help clear up lots of Adobe product abnormalities but listen up folks, it's not a SOLUTION, it is merely a work around. It shouldn't get so screwed up to begin with. This is not my product and although I have tried it, it is wrong to not fix these issues and just expect people to keep refreshing there preferences. It takes me hours and days to get things back the way I want them and normally half way to heaven another bug and I have to reset them yet again! This is us dealing with a broken product, period. It is far from a solution, there's a huge difference.
Moving along,,, This build is a few months old but my windows install is much more recent. All firmware, drivers you name it is up to speed 100% I guaruntee. My hardware is all working perfectly with the propable exception of the Matrox rig. It has to be it. Being that the 1st two people to reply in my own forum were able to immediately duplicate the error had me thinking other but as you should be able to see is that changed fast and if you read this thread from top to bottom you'll see that I have been providing all the answers people are asking.
Thanks again, I'll report back tonight. My current plan is to go through the painful process of getting just one monitor working without the Matrox unit, flushing my preferences and trying again. I think it will work fine but will report back either way.

ARD Installs every time I launch it!

Every time I launch ARD Admin 3.1 it asks me for my administrator password and then launches Remote Desktop Setup. It then proceeds to install required software components and sits there waiting for me to click Done. I remember in previous versions it asked for a password just for launching the program that had nothing to do with an administrator password and it did not go through setup each time. I went into preferences in ARD and reset my password but it still does the same thing each time. It is as if the installer receipt is not being accepted.

Your presumption of my account privileges is correct. I had previously followed the removal instructions you linked to and the subsequent installation was nothing but trouble. Every time I attempted installation it would start the process and the window would just disappear while installation was under way. Repeated attempts to install would see the installation window disappear at an earlier point in the installation (way weird). I finally got it to install by opening the contents of the installation package and running the individual installers for the Admin tool and Client separately. At least that is what I remember. I was so excited to see that it worked, I immediately tried to recall the sequence of events that lead to that success but my recollection is fuzzy. Similar to waking from a dream and struggling to remember what it was about.
At this point I am just so glad it works that I hate to mess with it again. Rather than grapple with the whole ordeal again, it is worth the annoyance of having setup run each time I need to use it .

Different but identical installations

I've not seen one like this on here yet and please bear with me:
I have 2 installations of CC, 1 on an iMac and the other on a MacBookPro. Both machines are running OSX 10.8.4. I installed the new CC version (now running 1.0.0.181) via a simultaneous download (I didn't download on 1 machine and copy across) and installed all the available apps.
On my iMac I now have a Launchpad icon for PhotoshopCC and CC but not for Encore - Encore also does not show under Applications under Finder.
On my MBP there is no icon for CC (although it is in the menu bar at the top, so I can live with that), but Ps has vanished - it was there yesterday but not today! It is visible under Applications but not within Launchpad - that is annoying, I don't want to have to open up Finder everytime I want to run an app. Also on my MBP I DO have an icon for Encore CS6 and it shows within Applications.
One other confussing issue is that the app updates seem to come at different times to each machine - sometimes one will have an update and the other won't at all.
For neatness (and to satisfy my OCD) I'm trying to have 2 machines that work in the same way and look as similar to each other as possible (the sync settings helps with that - simple idea but really helpful, thanks for that Adobe).
Overall CC is working fine and I'm happy with it and think it is a huge step forward for people like me who just couldn't afford to buy all this software on an individual basis, but any advice on these annoyances would be great.
Oh and I'm also getting that annoying close-down pop-up that somebody else has mentioned on both Macs, but it doesn't seem to stop the machines closing.

Further to above - I've sorted the Encore CS6 issue on the iMac, but the other stuff I need help with still.

What is wrong with the CS3 installer and why?

Not only will a DW trial not take a CS3 suite serial number,
CS3 will not go down on top of it.
That would only be a normal annoyance if both the uninstall
for DW and the install for CS3 were not both so painfully slow.
...just thought you guys should know how bad it is so that
you can fix it and so customers will know that it isn't just
them.

well, they're kind of big programs. big programs take some
time to install. especially when we're talking about an entire
suite with multiple big programs. that's just the way it is.
but i do agree that it's annoying how new installs don't
overwrite old versions. but that's not just DW/CS3. it seems to be
most programs these days. i hate the fact that i have to uninstall
older versions of programs after upgrading. it's a pain in my
butt!

Nokia PC Suite upgrade installs Firefox Extension

Dear Nokia
I upgraded my Nokia PC suite today. After installing the upgrade, I opened my browser, and was surprised to see that Nokia has thoughtfully added a piece of crapware to my list of Firefox extensions.
1. Commercial software developers must acknowledge that the computer belongs to the user. As such, the user has the right to choose what software to install on his machine (discussion of 'Green Dam' is beyond the scope of this post). Installing software without first asking the user deprives him of this right, and may result in annoyance.
2. If a piece of software has several components, some of which are optional, the installation process should ask the user which components should be installed. Failure to do so may annoy the user.
3. If software A is planning to modify pre-existing software B in any way, software A needs to ask the user's permission, as it may well break software B in the process. Failure to do so may annoy the user.
4. It has been documented that extensions may introduce security vulnerabilities into the browser (cf. Greasemonkey's GM_xmlhttpRequest). I'm sure that Nokia's SDLC is CMMI Level 5 and that they never release software with defects (hmmm), but if a virus were to be distributed through Nokia's extension, one can rest assured that the user will be annoyed.
I elected to install Nokia PC Suite v 7.1.30.9. I was not notified that the installation would include a Firefox extension, and thus had no option to opt-out. Installing software without obtaining the user's prior permission is a serious grievance, especially when doing so may affect another programme and/or introduce security vulnerabilities. This attitude, to my mind, smacks of arrogance, and I think it goes without saying that I am seriously annoyed. A quick Google will demonstrate that I am not alone in my annoyance.
It is thus recommended that Nokia allow the user to choose whether or not to install the PC Sync 2 Synchronisation Extension when upgrading PC Suite. Until that is effected, I suggest the following remedial process.
1. Close Firefox.
2. Delete the key HKLM\SOFTWARE\Mozilla\Firefox\extensions\[email protected]
3. Delete the folder %programfiles%\Nokia\Nokia PC Suite 7\bkmrksync

rossj81 wrote:
1. Close Firefox.
2. Delete the key HKLM\SOFTWARE\Mozilla\Firefox\extensions\[email protected]
3. Delete the folder %programfiles%\Nokia\Nokia PC Suite 7\bkmrksync
I'd like to start this post saying :
THIS HAS BEEN KNOWN ISSUE FOR A LONG TIME!
Thank You for the tip. I'm at situation where Nokia software has been removed. Folders deleted and as far as windows search can tell string "bkmrksync" can not be found from filenames in system drive. Regedit does not find the key either. All of this for my friend needed to do something with the software. Not so surprisingly he told me that the sofware was not capable of the doing the tasks he wanted. Is there anything else to do but stuff my comp full of explosives and send it to Nokia for I really do agree on the annoyance part.
I'd like to end this post saying :
THIS HAS BEEN KNOWN ISSUE FOR A LONG TIME!

I'm downloading in English but the Installation Wizard is in German

I'm trying to downlaod Firefox from the US Mozilla website. The downlaod "Run" is in English, but the Installation Wizard is in German. Is there a way to change this. I installed a previous time with the German installation wizard but then the toolbar and any messages are in German.

I've had a remote scan and an in-store scan, it's been determined that my hard drive is 'dying'. So to do anything at all, I've switched to safe mode. It's allowed me to do a couple of graphics projects and access my programs. In the recent past I managed to open a psd file and then it got hung up and I couldn't even click on layers. Then I could not even open folders, and finally the internet was not opening up. My provider - Comcast - sent a signal to allow me internet access also in safe mode, so now I don't need to go to the library to answer emails! I can work in my programs, it's just a temporary annoyance. And yes, the monitor is a fairly new 27". Thanks, Peter and Bob, guess I'll just wait it out... should be up and running by next Monday or Tuesday.

Tiger installation unsuccessful

now a few hours into attempting to upgrade from 10.2.8 to Tiger.
Installation stops at verifying disk.
An error is reported and then "Please try installing again".
Disk repair utility states, "The underlying task reported failure on exit."
Attempts at archiving and installing also fail.
I've read my third party RAM maybe a problem.
Should I remove it?

Hi Mark,
Welcome to the discussions.
Thank you very much for your input. I am concerned about what you are experiencing, though.
If the extra memory you have installed has this effect on your system, I would want to consider strongly not using it anymore.
As OS X has developed, it has become more "finicky" as regards RAM requirements. RAM that doesn't like an operating system can have all sorts of insidious effects and can lead to disk (hence data) corruption. This can cause a significant increase in the occurrence of annoyances such as Kernel Panics.
RAM issues seem to be the most under diagnosed hardware problems because their symptoms can sometimes be really subtle. So, if you've spotted an abnormal aspect of your RAM performance, that should ring warning bells.
Cheers!
Karl

ITunes & Windows Vista Home - Error File C:\Program Data\Apple Computer\Installer\Cache\iTunes 10.5.142\iTunes.msi was rejected by digital signature policy.

Tried
https://discussions.apple.com/thread/2713232?start=0&tstart=0
and
http://www.vistax64.com/vista-general/159940-computer-blocking-anything-no-digit al-signature.html
with no avail!!!
iTunes opens after I click OK on the above message however I cannot do anything within the app its like Windows it preventing it from running.
PLEASE HELP!!!

Update:
I tried what the diagnostic told me to do, and repaired the installation. I was able to burn a CD in iTunes, but after I restarted, the drives have disappeared again! Here's the diagnostic info now:
Microsoft Windows Vista Home Edition (Build 6000)
MICRO-STAR INC. MS-6728
iTunes 7.6.0.29
QuickTime 7.4
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
iTunes Serial Number 20D6EAF059AB94B4
Current user is not an administrator.
The current local date and time is 2008-01-15 19:09:32.
iTunes is not running in safe mode.
Video Display Information
ATI Technologies Inc., Radeon X1600/X1650 Series
ATI Technologies Inc., Radeon X1600/1650 Series Secondary
** External Plug-ins Information **
Plug-in Name: Last.fm iTunes plugin
Plug-in Loaded: Yes
Plug-in Version: 0.0.13
Plug-in File Version: 2.0.13.0
Plug-in Path: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
No drives showed up to be tested.

Can no longer enter data in the address bar {url Bar}, it correctly follows data from google search bar. It was a 1 month old installation so not a lot of complications

I was not adding anything to Firefox. I Refused tool bars embedded in several application installs on this new computer. Was working fine. Then had a problem with Google search, restored default values and re-tooled Firefox. At this point all worked fine. Then my url, address bar changed color to the same color as the program shell, a grey brown as opposed to the white it was before. With the change in color it no longer allows me to change the data showing in the bar. I can not delete or add data. I used to add a url and navigate to the domain. Now I can not

Greetings,
TY for the reply, the information was enlightening to be sure. I never knew safe mode was an option with Firefox. I have so many tasks running that I didn't want to shut things down. What I did is turn off some of the last plug-ins I installed. That did not fix the problem at least in the first look. What happened next was very interesting none the less. I had a moment of mouse spastic wrist syndrome and accidentally moved a tab in such a way that it opened in a new window. The URL bar was white and editable. So I moved all my tabs to the new window and everything works as it should. I have restarted Firefox this morning and it came back with the bar editable and I am speechless to understand what I may have done to correct the problem if anything ??

Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
Siddharth

Hi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth

Installation problem with NW'04 SR1: database connection failed

Hi all,
while installing NW '04 SR1 on Windows Server 2003 SP1 and MS SQL Server 2000 SP4 I ran into an error related to the database connection. While performing the step "Load Java Database content" SAPinst crashes with the message
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
The connection to the SLQ Server with e.g. the Query Analyzer is OK. I had a problem with this installation setup before (have a look at the corresponding <a href="https://forums.sdn.sap.com/thread.jspa?threadID=338638&tstart=0">thread</a> ), the JDBC drivers where missing on the installation master but after copying them in the right direction the installation went on with no problem up to this point...
Has anybody an idea what could have happened here? Is this maybe a problem connected to the one I recently had
Below I attached the sapinst.log and jload.log with more detailed messages.
sapinst.log ###########
INFO 2007-03-12 22:06:24
Working directory changed to C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST.
INFO 2007-03-12 22:06:24
Output of D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' is written to the logfile C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_~1\ONE_HOST/jload.java.log.
WARNING 2007-03-12 22:06:26
Execution of the command "D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'" finished with return code 1. Output:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
12.03.2007 22:06:25 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.2007 22:06:26 com.sap.inst.jload.Jload main
SCHWERWIEGEND: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
ERROR 2007-03-12 22:06:26
CJS-20065 Execution of JLoad tool 'D:\Java/bin/java.exe '-classpath' './sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\base.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\util.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WPT/JC10/j2ee\jdbc\spy.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/WPT/SYS/global/security/lib/tools/w3c_http.jar' '-showversion' '-Xmx512m' 'com.sap.inst.jload.Jload' '-sec' 'WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key' '-dataDir' 'S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP' '-job' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML' '-log' 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log'' aborts with returncode 1. Check 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log' and 'C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.java.log' for more information.
jload.log ###########
12.03.07 22:06 com.sap.inst.jload.Jload main
INFO: Jload -sec WPT,jdbc/pool/WPT,D:\usr\sap\WPT\SYS\global/security/data/SecStore.properties,D:\usr\sap\WPT\SYS\global/security/data/SecStore.key -dataDir S:/D51030724\J2EE_OSINDEP\J2EE-ENG/JDMP -job C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/IMPORT.XML -log C:\PROGRA1\SAPINS1\NW04SR1\WEBAS_1\ONE_HOST/jload.log
12.03.07 22:06 com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
com.sap.sql.log.OpenSQLException: Could not load class com.ddtek.jdbc.sqlserver.SQLServerDriver.
Best regards,
Bernd

Hello Kairat,
Please follow the below mentioned guide to install it.
Check all the parameters to set and run pre requisite checker before starting installation.
Keep in mind that before starting any SAP installation you should always run prerequisite checker.
https://websmp205.sap-ag.de/instguides --> SAP Netweaver -->SAP Netweaver 7.0 -- > Installations --> EHP2
Regards,
Amit Barnawal

Installation annoyance

Similar Messages

Maybe you are looking for