Installation as single node help needed

I want to install 11i from cd pack on my laptop running win2000 professional.
Any help???
I have access to meta link but I am new , where to look for installation help in metalink?
Atleast can somebody clear this that CD pack 11i installation need win200 srv or professional if single node installation is intended and databse is vision and not 8i.
Thanks
Javed

When you run the 'Start Here' CD, the webpage diplayed gives a number of links to Metadata.
# Print and review Installing Oracle Applications.
Print and review the most up-to-date installation information on OracleMetaLink.
Release 11.5.5 Release Notes - all operating systems
Installation Update for Sun SPARC Solaris
Installation Update for MS Windows NT & MS Windows 2000
Installation Update for HP 9000 Series HP-UX
Installation Update for AIX-based Systems
Installation Update for Compaq Tru64 UNIX
Installation Update for Linux Intel
The document 'Installing Oracle Applications' also details some additional documents to review.
You are also given the information on running rapid Installer.
Please Note, I found that when running the installer, I ran out of disk space. I de-installed the products, and tried to re-install them. I found I was unable to run rapidwiz.cmd. The result being I have one machine in limbo, until I get a responce to the problem, and I had to re-build a second, to get past the error.

Similar Messages

Install 10gr2 ASM on single node, need clusterware installe first?

Install 10gr2 ASM on single node, Do I need install clusterware first?
When I install clusterware on single node, it shows " the specified nodes are not clusterable"
Thanks.

ASM and clusterware are two separate things. Clusterware is required only if you are setting up a RAC environment, is this your case? If you are just planning to use ASM then proceed with the RDBMS (database disk) install and use the DBCA to perform ASM configuration. It is assumed you have the raw devices ready to setup the ASM instance. Once the ASM instance is ready you can create the database to use the ASM disks.
~ Madrid
http://hrivera99.blogspot.com/

GI installation on a single-node cluster error.

Hello, I am trying to install GI on a single-node cluster (Solaris 10 / Sparc) but the root.sh script fails with the following error (this is not a GI installation for a Standalone Server :
root@selvac./dev/ASM/OCRVTD_DG # /app/oracle/grid/11.2/root.sh
Running Oracle 11g root script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /app/oracle/grid/11.2
Enter the full pathname of the local bin directory: [usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /app/oracle/grid/11.2/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
ACFS-9200: Supported
ACFS-9300: ADVM/ACFS distribution files found.
ACFS-9312: Existing ADVM/ACFS installation detected.
ACFS-9314: Removing previous ADVM/ACFS installation.
ACFS-9315: Previous ADVM/ACFS components successfully removed.
ACFS-9307: Installing requested ADVM/ACFS software.
ACFS-9308: Loading installed ADVM/ACFS drivers.
ACFS-9327: Verifying ADVM/ACFS devices.
ACFS-9309: ADVM/ACFS installation correctness verified.
CRS-2672: Attempting to start 'ora.mdnsd' on 'selvac'
CRS-2676: Start of 'ora.mdnsd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'selvac'
CRS-2676: Start of 'ora.gpnpd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'selvac'
CRS-2672: Attempting to start 'ora.gipcd' on 'selvac'
CRS-2676: Start of 'ora.cssdmonitor' on 'selvac' succeeded
CRS-2676: Start of 'ora.gipcd' on 'selvac' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'selvac'
CRS-2672: Attempting to start 'ora.diskmon' on 'selvac'
CRS-2676: Start of 'ora.diskmon' on 'selvac' succeeded
CRS-2676: Start of 'ora.cssd' on 'selvac' succeeded
ASM created and started successfully.
Disk Group OCRVTD_DG created successfully.
The ora.asm resource is not ONLINE
Did not succssfully configure and start ASM at /app/oracle/grid/11.2/crs/install/crsconfig_lib.pm line 6465.
/app/oracle/grid/11.2/perl/bin/perl -I/app/oracle/grid/11.2/perl/lib -I/app/oracle/grid/11.2/crs/install /app/oracle/grid/11.2/crs/install/rootcrs.pl execution failed
I also found the "PRVF-5150: Path OCRL:DISK1 is not a valid path on all nodes" error but as I have read it is a bug I Ignored it. But...
I think my ASM_DG OCR and voting is ok, accessible by grid user and 660. It seems ASM does not start or does not start in time.
Any help is wellcome.
Thanks in advance.

Thanks a lot for the hint. I had already checked this doc. but I think it is not the problem. Actually de error ora.asm is not online is not correct. After failing root.sh, ora.asm is ONLINE:
root@selvac./app/oracle/grid/11.2/bin # ./crsctl check resource ora.asm -init
root@selvac./app/oracle/grid/11.2/bin # ./crsctl stat resource ora.asm -init
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=ONLINE on selvac
The last part of the /app/oracle/grid/11.2/cfgtoollogs/crsconfig/rootcrs_selvac.log file reads :
>
ASM created and started successfully.
Disk Group OCRVTD_DG created successfully.
End Command output2011-04-14 13:24:16: Executing cmd: /app/oracle/grid/11.2/bin/crsctl check resource ora.asm -init
2011-04-14 13:24:17: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:17: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:17: Checking the status of ora.asm
2011-04-14 13:24:22: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:22: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:22: Checking the status of ora.asm
2011-04-14 13:24:27: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:28: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:28: Checking the status of ora.asm
2011-04-14 13:24:33: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:33: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:33: Checking the status of ora.asm
2011-04-14 13:24:38: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:38: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:38: Checking the status of ora.asm
2011-04-14 13:24:43: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:43: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:43: Checking the status of ora.asm
2011-04-14 13:24:48: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:49: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:49: Checking the status of ora.asm
2011-04-14 13:24:54: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:54: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:54: Checking the status of ora.asm
2011-04-14 13:24:59: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:24:59: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:24:59: Checking the status of ora.asm
2011-04-14 13:25:04: Executing cmd: /app/oracle/grid/11.2/bin/crsctl status resource ora.asm -init
2011-04-14 13:25:04: Command output:
NAME=ora.asm
TYPE=ora.asm.type
TARGET=ONLINE
STATE=OFFLINE
End Command output2011-04-14 13:25:04: Checking the status of ora.asm
2011-04-14 13:25:09: The ora.asm resource is not ONLINE
2011-04-14 13:25:09: Running as user grid: /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL
2011-04-14 13:25:09: s_run_as_user2: Running /bin/su grid -c ' /app/oracle/grid/11.2/bin/cluutil -ckpt -oraclebase /app/grid -writeckpt -name ROOTCRS_BOOTCFG -state FAIL '
2011-04-14 13:25:10: Removing file /var/tmp/mbahSaGPn
2011-04-14 13:25:10: Successfully removed file: /var/tmp/mbahSaGPn
2011-04-14 13:25:10: /bin/su successfully executed
2011-04-14 13:25:10: Succeeded in writing the checkpoint:'ROOTCRS_BOOTCFG' with status:FAIL
2011-04-14 13:25:10: ###### Begin DIE Stack Trace ######
2011-04-14 13:25:10: Package File Line Calling
2011-04-14 13:25:10: --------------- -------------------- ---- ----------
2011-04-14 13:25:10: 1: main rootcrs.pl 322 crsconfig_lib::dietrap
2011-04-14 13:25:10: 2: crsconfig_lib crsconfig_lib.pm 6465 main::__ANON__
2011-04-14 13:25:10: 3: crsconfig_lib crsconfig_lib.pm 6390 crsconfig_lib::perform_initial_config
2011-04-14 13:25:10: 4: main rootcrs.pl 671 crsconfig_lib::perform_init_config
2011-04-14 13:25:10: ####### End DIE Stack Trace #######
2011-04-14 13:25:10: 'ROOTCRS_BOOTCFG' checkpoint has failed
So this must be a bug. During root.sh execution ora.asm is OFFLINE but after failing it is ONLINE. It maight be a question of waiting/repeating or timeout as I see the "Checking the status of ora.asm" command is repeated several times during root.sh, but not enough perhaps. Now root.sh is failed, installation halted but ASM is ONLINE.
Any other Idea?
Thanks again.

Gettig the error at the end of single node installation on OEL5.6 32-bit

Gettig the following error at the end of single node installation on OEL5.6(32-bit)
I am getting the following error enf of the single node installation on OEL5.6(32-bit). I have installed the following RPMs
rpm -Uvh sysstat
rpm -Uvh libaio-devel
rpm -Uvh compat-libstdc++
rpm -Uvh compat-libstdc++
rpm -Uvh xorg-x11-libs-compat-
rpm -Uvh unixODBC-2.2.
rpm -Uvh unixODBC-devel
rpm -Uvh libXp-
rpm -Uvh openmotif21
These are following failed, when I clicked the respective button I get these respective errors...
HTTP
checking URL = http://linux1.oracle.com:8001
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Help Page
checking URL = http://linux1.oracle.com:8001/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
SP
checking URL = http://linux1.oracle.com:8001/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Please let me know how to fix this.
Thanks.
Joy.

Helios,
While starting the application I am getting the following...
============================================
[applprd1@linux1 scripts]$ ./adstrtal.sh
You are running adstrtal.sh version 120.15
Enter the APPS username: apps
Enter the APPS password:
The logfile for this session is located at /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adstrtal.log
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adopmnctl.sh start
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 0
adopmnctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adopmnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adalnctl.sh start
script returned:
adalnctl.sh version 120.3
Checking for FNDFS executable.
Listener APPS_PRD1 has already been started.
adalnctl.sh: exiting with status 2
adalnctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adalnctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adapcctl.sh start
script returned:
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
adapcctl.sh: exiting with status 204
adapcctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adapcctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adoacorectl.sh start
script returned:
You are running adoacorectl.sh version 120.13
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 150
adoacorectl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adformsctl.sh start
script returned:
You are running adformsctl.sh version 120.16
Starting OPMN managed FORMS OC4J instance ...
adformsctl.sh: exiting with status 150
adformsctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adformsctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adoafmctl.sh start
script returned:
You are running adoafmctl.sh version 120.8
Starting OPMN managed OAFM OC4J instance ...
adoafmctl.sh: exiting with status 150
adoafmctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adoafmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/adcmctl.sh start
script returned:
You are running adcmctl.sh version 120.17.12010000.3
Starting concurrent manager for PRD1 ...
Starting PRD1_0627@PRD1 Internal Concurrent Manager
Default printer is noprint
adcmctl.sh: exiting with status 0
adcmctl.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adcmctl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u01/prd1/inst/apps/PRD1_linux1/admin/scripts/jtffmctl.sh start
script returned:
You are running jtffmctl.sh version 120.3
Validating Fulfillment patch level via /u01/prd1/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for PRD1 on port 9301 ...
jtffmctl.sh: exiting with status 0
.end std out.
.end err out.
adstrtal.sh: Exiting with status 4
adstrtal.sh: check the logfile /u01/prd1/inst/apps/PRD1_linux1/logs/appl/admin/log/adstrtal.log for more information ...
===============================================
[Service Control Execution Report]
The report format is:
<Service Group> <Service> <Script> <Status>
Root Service Enabled
Root Service Oracle Process Manager for PRD1_linux1 adopmnctl.sh Started
Web Entry Point Services Enabled
Web Entry Point Services Oracle HTTP Server PRD1_linux1 adapcctl.sh Failed
Web Entry Point Services OracleTNSListenerAPPS_PRD1_linux1 adalnctl.sh Already Started
Web Application Services Enabled
Web Application Services OACORE OC4J Instance PRD1_linux1 adoacorectl.sh Failed
Web Application Services FORMS OC4J Instance PRD1_linux1 adformsctl.sh Failed
Web Application Services OAFM OC4J Instance PRD1_linux1 adoafmctl.sh Failed
Batch Processing Services Enabled
Batch Processing Services OracleConcMgrPRD1_linux1 adcmctl.sh Started
Batch Processing Services Oracle Fulfillment Server PRD1_linux1 jtffmctl.sh Started
Other Services Disabled
Other Services OracleFormsServer-Forms PRD1_linux1 adformsrvctl.sh Disabled
Other Services Oracle Metrics Client PRD1_linux1 adfmcctl.sh Disabled
Other Services Oracle Metrics Server PRD1_linux1 adfmsctl.sh Disabled
Other Services Oracle MWA Service PRD1_linux1 mwactlwrpr.sh Disabled
ServiceControl is exiting with status 4
Thanks.
Joy.
Edited by: user11952526 on Jun 26, 2011 11:51 AM

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

2 Node RAC with Single Node Standby Help

Hello Everyone -
I'm preparing to set up a 2 node RAC and use a single-node standby database.
I'm a bit confused on how to set up the Standby Redo Logs on the standby to use the LGWR functionality from the RAC instances.
Should I just create a set of standby redo logs (alter database add standby logfile...) like on a single-instance environment or do I need to create standby logfile threads (alter database add standby logfile thread. . . ) one for each cooresponding thread on the RAC?
It just seems odd that 2 RAC redo threads are able to write to one standby redo logfile at the same time (or maybe each RAC redo thread picks the first available standby redo log and writes to it??)
If anyone has some advice or insight, I'd appreciate it.
Andy

Hello Andy,
Did you get answer to your question about RAC with single standby?
Could you please share with me your experience if you have done so.
Thanks
Amit

Help needed - software installation on Nokia N8

I've got a Nokia N8 and wanted to get "weather maps". I already have the Nokia weather application, and the SPB Weather application as well. After looking around on the internet, I found some good information recommending "Weatherbug" for the N8. Info can be found here:
http://www.allaboutsymbian.com/reviews/item/12787_WeatherBug.php
http://store.ovi.com/content/81290
I tried to downloadn and install the program. I got a message that doing so might also require downloading other software that might be up to 12 megs or so. (I guessed this was QT, which I already have from my installation of Nokia Bubbles.)
I downloade the sofware, and got a message that I then had to get the first of two downloads. After the download, the installation failed, and I got a message that I should click on an icon for something like "smart install" to continue.
Clicking on "Smart Installer ADM" gets me to "Continuing Installation Weather Bug".
I need to connect to the internetI so I click on "connect this time".
Eventually my phone downloads the first of two software downloads, and then the installation fails.
Any advice on a better way to install this program?
Do I have to first update "QT" or something?
Is there any way to get more useful error messages, so I have some idea of what is going on?
Is there a better place to download Weathrbug from ratherr than the OVI store?
Anybody have any idea why there are three things to download to get this one program?

Hei!
I had big problems installing the new "WRC-live" app from Ovi Store
and also tought it has something to do with the "Qt"-issue. I am not
any kind of tech person, I don't know how the "Qt" works, but I remember
I tried to download the new CNN-app from Nokia Beta Labs few weeks
ago (with no success). Was it the reason to my problems, I don't know for sure.
Using the NSD's search option I found @aspergerguy's excellent post and link
to this post of @carman58.
I downloaded the qt 4.7.3 from the link above using my N8's own browser via 3.5g
connection (it took some time), installed all the three apps and Vòila!
Now downloading "wrc-live" went well and app is runnig smoothly!
Kudos for @aspergerguy and @carman58! Thank You!
-vvaino
P.S. link to @aspergerguy's post;
/t5/Nseries-and-S60-Smartphones/Lately-applications-not-installing-on-my-N8/m-p/1021327#M265642
#SwitchToLumia

Help needed regarding the deployment architecture for PROD env

Dear All,
Please help me with some clarifications regarding the deployment architecture for PROD env.
As of now I have 2 single node 12.1.1 installations for DEV and CRP/TEST respectively.
Shortly I will be having a PROD env of 12.1.1 with one DB node and 2 middle tier (apps) node. I need help in whether -
1) to have a shared APPL_TOP in the SAN for the 2 apps node or to have seperate APPL_TOPs for the 2 apps node. The point is that which will be benificitial in my case from business point of view. The INST_TOPS will be node specific in any case right?
2) Where to enable the Concurrent Managers, in the DB node or in the primary apps node or in 2 apps node both for better performance.
12.1.1 is installed in RHEL 5.3
Thanks and Regards

Hi,
Please refer to (Note: 384248.1 - Sharing The Application Tier File System in Oracle E-Business Suite Release 12).
For enabling the CM, it depends on what resources you have on each server. I would recommend you install it on the the application tier node, and leave the database installed on one server with no application services (if possible).
Regards,
Hussein

Oracle Single Node RAC - Oralce Clusterware Install

Hi
I want to install Oracle Clusterware to perform Active / Passive failiver for a 2 node cluster
I plan to use Oracle Single Node RAC for this and have Oracle Clusterware control the active passive failover.
However - I do not want to use ASM in any of my set-up.
We have a NetApp filer and are using NFS / NetApp technologies to control backups (Oracle snap manager).
Is this possible?
All the documents I have include reference to ASM
If I try and install Grid - I am also asked for ASM information.
I find ASM an un-necessary overhead given the storage we have and do want to use it,
Can anyone help?

Hi,
no you don't need ASM to have RAC One Node. OCR and Voting disk can be on NFS, simply use Shared Disk location during installation, and you won't get asked about ASM.
http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDECEBGH
Especially http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDEDAHGB
What you should use in conjunction with NFS however is dNFS.
Regards
Sebastian

BizTalk Mapper - Looping multiple nodes to map to a single node in a single row (flat file)

Hi everybody,
I'm still new in developing BizTalk app and require some help in this one problem. Appreciate your time and input to help me on this.
Basically I have an XML document as input and a flat file as output. Example for input is as per below. The "Contact" node's maxOccurs here is set to unbounded and could be multiple. (phone, fax, website, telex ...)
<root>
<CustomerName>Company A</CustomerName>
<Contact>
<Type>Phone</Type>
<Locator>03566789</Locator>
<Type>Phone</Type>
<Locator>03566790</Locator>
<Type>Fax</Type>
<Locator>03566795</Locator>
<Type>Telex</Type>
<Locator>03566798</Locator>
<Type>Website</Type>
<Locator>www.companyA.com</Locator>
</Contact>
</root>
The expected output in XML would look like below. The final outcome would be a csv file. Strictly Phone 1, phone 2, fax and telex, the rest would be ignored.
<root>
<CustomerName>Company A</CustomerName>
<Phone1>03566789</Phone1>
<Phone2>03566790</Phone2>
<Fax>03566795</Fax>
<Telex>03566798</Telex>
</root>
Example of expected output result (csv file): CompanyName;Phone1;Phone2;Fax;Telex;
In our case here: Company A;03566789;03566790;03566795;03566798;
Another example could be: Company B;036778911;;036778912;; if only 1 phone number and 1 fax number provided.
I've used Table Looping and Table Extractor and nearly got the desired result except that it is represented in multiple rows instead of one: Example:
Company A;03566789;;;
Company A;;03566790;;;
Company A;;;03566795;;
Company A;;;;03566798;
Any idea how to do the mapping? I'm kind of stuck here and it sounds like an easy problem but i could not find any example to the solution that I need here. Table looping and table extractor is ok to map from single node flat file to multiple nodes but not
the reverse like in this example.
rgds,
sportivo

Hi,
Please refer to below links where similar issue has been answered.
http://social.msdn.microsoft.com/Forums/en-US/biztalkgeneral/thread/ecdff241-6795-4a95-bad7-48fca4410dfb
http://www.epinaki.com/2011/05/other-options-to-using-biztalk-table-looping-functoid-par-i/
I hope this helps you.
Thanks With Regards,
Shailesh Kawade
MCTS BizTalk Server
Please Mark This As Answer If This Helps You.
http://shaileshbiztalk.blogspot.com/

Upgrade FP2.2.1 to FP2.4 single-node on WLS fails (FPCheckSOAServerStatus)

Hi All,
Issue: Upgrade from FP2.2.1 to FP2.4
Issue: java.io.FileNotFoundException: /apps/aiahome2/Infrastructure/install/scripts/FPCheckSOAServerStatus.xml (No such file or directory)
We're trying to upgrade a single-node Development Environment from FP2.2.1 to FP2.4 on WLS 9.2 MP3 running RedHat 4.
First time, the upgrade failed it complained that it couldn't write to log-file $AIA_HOME/logs/Install/FP/FPInstall.log since the directory $AIA_HOME/logs/Install/FP didn't exists. We created the directory manually and tried again.
Second time it failed, the serveroutput shows Build Failed.
BUILD FAILED
/apps/aiahome2/Infrastructure/install/scripts/FPInstall.xml:94: exec returned: 1
Total time: 3 seconds
09/16/2009 12:10 AM : ERROR: Error executing the command:
setenv PATH /apps/aiahome2/apache-ant-1.7.0/bin:/apps/product/10.1.3.1/OracleAS_2/jdk/bin:$PATH &&
setenv ANT_HOME /apps/aiahome2/apache-ant-1.7.0 &&
setenv JAVA_HOME /apps/product/10.1.3.1/OracleAS_2/jdk && setenv DEPLOY_COMP oracle.aia.common &&
setenv ORACLE_HOME /apps/product/10.1.3.1/OracleAS_2 &&
setenv AIA_HOME /apps/aiahome2&&
setenv BPEL_HOME /apps/product/10.1.3.1/OracleAS_2/bpel &&
cd /apps/aiahome2/Infrastructure/install/scripts && ant --noconfig -buildfile FPInstall.xmlIf I read the whole log correctly, the installer was successful (dumped all the files in the correct location), but not the configuration.
==> The $AIA_HOME/logs/Install/FP/FPInstall09162009-001043.log shows:
bash-3.00$ more FPInstall09162009-001043.log
InstallAIAFP:
BUILD FAILED
/apps/aiahome2/Infrastructure/install/scripts/FPInstall.xml:115: The following error occurred while executing this line:
java.io.FileNotFoundException: /apps/aiahome2/Infrastructure/install/scripts/FPCheckSOAServerStatus.xml (No such file or directory)
Total time: 0 secondsThe directory listed above, does not have that FPCheckSOAServerStatus.xml file. We even did a "find..." on the installation directory but could not find the missing file.
Have anyone seen anything similar? I've searched Metalink and Internet, but with no result for that missing file etc.
Just a note: When executing the FP2.4 Installer, we had to set Execute rights on three-four shell scripts in order to start the Installer.
Any help is highly appreciated.
Regards,
Martin

Hello Martin !
Upgrade of FP 2.2.1 to 2.4 is not supported on Weblogic. Could you get in touch with me and [email protected] offline.
Thanks
-Teja

Server Requirements - Always On in a single server? - Needs clustering even one server on another Data Center?

Hello:
I have been asking this questions to different forums and got different responses, so I wanted to know if asking to "Microsoft" will give me some good directions. (All in SQL Server 2012, including the OS)
Question 1.- Always On "HAS" to be configured on a WSFC node? How about in a Single SQL Server. (NO Clustering)?.
Question 2.- What about our mirroring processes configured and running in single servers, do we have to have WSFC installed before we can upgrade them to Always On?.
Question 3.- In a case I have WSFC, and configure Always On, can my second or third replica reside in a single SQL Server? (No WSFC). What if I can not have Clustering in a DR Data Center? or I do have only VM's on the DR Center?
Any help will be greatly appreciated.
Thanks
Oscar Campanini

Hi Oscar,
Please find the answers below.
Question 1.- Always On "HAS" to be configured on a WSFC node? How about in a Single SQL Server. (NO Clustering)?.
                - Yes . Each replica must be on a different node of a WSFC cluster. Without WSFC Cluster you cannot create always on as it relies on the failover capabilities of the
cluster.
Question 2.- What about our mirroring processes configured and running in single servers, do we have to have WSFC installed before we can upgrade them to Always On?.
                 - You cannot really upgrade a Database mirroring configuration to Always on , both are different and works differently. Again for Always on each participating
replica must be on a WSFC cluster
Question 3.- In a case I have WSFC, and configure Always On, can my second or third replica reside in a single SQL Server? (No WSFC). What if I can not have Clustering in a DR Data Center? or I do have only VM's on the DR Center?
               - NO all replicas have to be in single nodes of WSFC cluster.
Note: SQL Server doesnt have to be clustered.
Consider the following scenario. YOu need to create Always on with a 3 node topology ie 1 Primary, I secondary and 1 readonly secondary.
YOu need to have all these three nodes a part of Windows Server Failover Cluster. The clustering needs to be done only in the windows level. YOu can install standalone SQL Servers on all these 3 nodes and then condigure them as replica's in ALways on.
Read these links to clear your questions -
http://technet.microsoft.com/en-gb/sqlserver/gg490638.aspx
http://technet.microsoft.com/en-us/library/hh510230(v=SQL.110).aspx
http://technet.microsoft.com/en-us/library/ff878487(v=sql.110).aspx#ServerInstance
Note: When I said Always ON I was reffering to Availability Groups.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

How to change from single Node to RAC for AIA

Recently I have installed AIA 11.1.1.5, but during installation I selected single node. But now I would like to configure it to use RAC. How to do it? Reinstalling is not an option.

Hi,
Hope this helps
http://proskudin.blogspot.com/2007/06/two-level-tabs.html
Br,Jari

Help Needed with BAM Cluster Install - Going to production this week

For our production system we plan on having a two node active/passive Windows 2003 server cluster for BAM. My first attempt at installation was not successful, and I'd like clarification/advice from anyone who has been through a clustered BAM install.
Each node has a local C: and E: drive. Each node also has access to a Q: and R: drive when it is the active node in the Windows cluster.
The BAM installation guide says to do the install (with the ADC cluster component selected) on each node. It then says later to make sure that the ADC directories are installed on the shared drives before running cluster.exe and configuring the clustered ADC service.
I installed BAM to each node on the node's local E: drive. Then I realized that there is no way to tell BAM (at least I could not find a config file that specified it) where to put the ADC cache files! I pressed ahead anyhow, running cluster.ex, but needless to say in the end the service would not come up on any cluster node.
The next thing I tried was to evict node2 from the cluster so I had a single node cluster. I then removed BAM from the remaining node and reinstalled it to the shared R: drive. The install completed OK but I still could not get the clustered service to start.
In the process of all of this, somehow something has corrupted the cluster so that the nodes can no longer obtain the Cluster IP and Cluster Name. I also found out that they had issues with the IIS install on one of the nodes as well. At this point I have asked our system administrators to re-image both boxes and re-cluster them.
My question is: Can anyone outline the steps to installin BAM on a two node cluster?
Specifically, does each install go to the shared drive (have one node down install to the active node's shared drive and then switch and do the install on the second node with it pointing to the shared drive) or is there some other way to point the ADC service to the shared drive for it's directories?
ANY help would be appreciated!
--Charles Piazza

You can access the Oracle Application Server HA Guide here :
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28941/toc.htm
Specifically, the BAM section is available at :
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28941/soa.htm#BGBBIIEC

Installation as single node help needed

Similar Messages

Maybe you are looking for