Installation cannot complete. Nothing at the latest stage of "Your server..

Hello everybody!
I try to install Leopard Server 10.5 on my old MacMini.
Start loading from original DVD, then around 1 hour to disk checking procedure + installing,
then after entering all reg. data, usage purpose, and user name and password, last stage (when "Confirm Settings" screen appear with all manually entered data), progress bar "Your Server are being configured" are going to last stage and NOTHING after this.
I mean mouse, keyboard and HD are working, after around 20 min, I cannot hear nothing from HD but my MacMini not freezing.
Just waiting something...
Please look at the pictures
http://gallery.me.com/sergei.shablovsky/100366
When I again and again try to power off this mac mini then system start from initial screen.
And I cannot load from DVD by Option on start, or Commandv/s, or "C" on start. May be due firmware password enabled ?
Before that old server are working great without errors and freezing, this is just reinstalling the same OS 10.5 after HD replacing.
Thank You for

Sergei
If the server is not connected to a working ethernet connection then do so. If it is connected then disconnect it at the point where it starts configuring the server. The setup assistant should then complete and you should be able to re-connect the network cable successfully. If the server is being deployed in an existing mature network where there are already other working servers then make sure and appropriate IP address and DNS records have been created for it.
Alternatively connect it to a standalone switch that is not connected to anything else. Server install should now complete successfully.
Tony

Similar Messages

  • My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

    My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

    On your iPad tap Settings > Store
    Switch Books off then back on then reset your iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try ag

    For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try again or enter an alternate path to a folder containing the installation package iTunes.ms in the box below.
    Please help!
    Many thanks in advance
    Ben Bentley
    West Midlands
    UK

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Everytime i try to sync my music to my ipod, it always completely stops during the last stage. What can I do to get it to sync properly?

    Everytime i try to sync my music to my ipod touch, it always completely stops during the last stage. What can I do to get it to sync properly?

    Have you looked here:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    The link provides links for other Win OSs.  If you are still having problems please tell us what OS and version you are running and what version of iTunes you have installed.

  • "Cannot complete command because the extension could not be loaded." with CEP5 Sample

    Hi,
    I have trouble with porting my extension to CEP5. I am getting error "Cannot complete command because the extension could not be loaded." when I open the panel.
    Is there any way to get more info about what happened and why? My extension was properly signed zxp and Extension Managed installed it without trouble.
    Also, to debug the problem, I tried to open the CEP HTML Test Extension - https://github.com/Adobe-CEP/Samples/tree/master/CEP_HTML_Test_Extension_5.0
    I have copied it to "~/Library/Application Support/Adobe/CEP/extensions/com.adobe.CEPHTMLTEST", created .debug file in it (https://gist.github.com/m6k/39a49786b7a85a9e312b), created empty .debug file inside Photoshop CC 2014.app (to suppress signature checking). When I open Photoshop CC 2014, I see test panels listed in extension menu, but when I try to open them, I also get the "Cannot complete command because the extension could not be loaded." error.
    Any hints what i am doing wrong and what can I do to debug this problem?
    Jan

    Hallgrimur, thanks, that is exactly the article I needed!
    My problem was that I forgot about the pref file  "~/Library/Preferences/com.adobe.CSXS.5.plist".

  • "Cannot complete command because the extension could not be loaded" ?

    I have installed a photoshop plugin into photoshop cc. However when I go to windows => extension => photoshop plugin, it shows me "Cannot complete command because the extension could not be loaded". What should I do ?
    Thanks.

    I think you posted on the »wrong« Forum. (edited)
    http://forums.adobe.com/community/labs/extensionbuilder3?view=discussions

  • Get message Cannot complete command because the extension could not be loaded.

    When clicking in CS5 Photoshop menu - "Essentials", "New is CS5 "or "CS LIve", I get a message "Cannot complete command because the extension could not be loaded". I get the same message when attempting to acces frm Window>Extensions> then clicking on one of the listed exteneions.  This is been going on for some time for no apparent reason.  Using version 12.0.4 (x32) iMac OS 10.6.8 - Intel Quad Core.

    I unstalled Photoshop.  Then I installed on another drive.  External.  It did the same thing!!!!  No mini-bridge, or any extentions loading.  I don't know what is wrong.
    I read something somewhere about a Panels file in photoshop.  So I'm looking there.

  • I tried to reinstall itunes, in the middle of the installing process i get the message "The installer has insufficient priviliges to access this directory:C\ProgramFiles [x86]\iTunes. Installation cannot continue.Log on as Administrator or contact your sy

    I tried to reinstall Itunes so i can have my computer interact with my iPod Classic.I uninstalled all the previous programs per apple's instructions.Part way during the reinstallation an error message comes up: The installer has insufficient priviliges to access this directory: C\ProgramFiles[x86]\iTunes.
    Installer cannot continue.Log on as administrator or contact your system administrator.
    I am the administrator on this HP computer.

    Hello PamelaFox14,
    Thank you for using Apple Support Communities.
    It sounds like you need to log in as the administrator to update the iTunes application properly.
    Take a look at this article named:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    This section in particular:
    1. Make sure you have administrator account access
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
    All the best,
    Sterling

  • You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles

    Hi
    I recently upgrade tp 7.0.3  from 7.0.2.
    While upgrade i found that i am not able to login to the web server with the admin id "admin" default created in the application server.
    The same id i can login to application server  , but not in wewb server.
    I am getting the mentioned error "You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles".
    However if i create a new user in application server and tried logging with the  same in the web server it is working fine..
    is it a known behaviour wirh the upgrade or i m facing some issue.
    Hope i can find a solution here.
    Regards
    RC

    RC,
    This behavior is stemming from a change in MP 7.0 MR2 to disable the MPWeb login for system profiles.  This was an internal change made by the developers to restrict the log on to the MPWeb page by the default accounts created in MeetingPlace upon installation.  The change now displays this error when the admin account is attempted to be used for MPWeb login, as you experienced-
    Error:[22953] You cannot sign in to the Cisco Unified MeetingPlace Web Server interface using preconfigured system profiles.
    You should be able to log into MPWeb using any other user profile that you have either created manually or pulled in from LDAP/Active Directory.  You just cannot use the admin account.  This is reserved for login to the MP Application Server Administration page only.  I am going to work to get this information added to the MP 7.0 documentation with a note for changed behavior in MR2 and above.  Here is the note from MP 8.0 documentation-
    Note: You cannot use this preconfigured admin profile to access the Cisco Unified MeetingPlace Web Server interface. Instead enter the User ID and password information from one of the other user profiles that have system administrator privileges to sign in to the Web Server.
    Please let me know if you have any further questions.
    Thank You,
    Gerry

  • ITunes cannot sync photos to the iPhone "iPhone" because your iPhoto Library is not yet available. Please try again later.

    Ive been trying to sync my phone and it shows this:
    iTunes cannot sync photos to the iPhone “iPhone” because your iPhoto Library is not yet available. Please try again later..............
    When i connect my phone iPhotos comes up and shows my photos and i even tried syncing my photos to my laptop and even deleting them and this message keeps popping up. it just backs up then says downloading photos on iTunes then that error message comes out.

    Same thing on iOS 8.1.2, on my iPad and iPhone. Unlikely to be the devices ....

  • ITunes cannot sync photos to the iPad/Iphone because your Photos Library is not yet available. Please try again later.

    Unable to sync my photos from photo library in Mac Bock Pro to Iphone/Ipad through ITunes, every time to sync I get this massage " iTunes cannot sync photos to the iPad/Iphone because your Photos Library is not yet available. Please try again later".  Any advice pls.

    iTunes: Unable to sync photos
    Cannot sync photos "iPhoto library is not yet available"

  • My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

    My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT4972 i would like to know if you have to get the latest itunes on your computer to update your ipod to the latest version?

    i would like to know if you have to get the latest itunes on your computer to update your ipod to the latest version?

    Note that the 3G iPod can only go as high as 5.1.1
    The 6G to 6.1.5
    The 5G to the current 7.0.X
    Identifying iPod models

  • What is the latest version of SQL Server which ColdFusion 7 supports?

    What is the latest version of SQL Server which ColdFusion 7 supports? For example can Cold Fusion 7 connect to SQL Server 2012 or 2008 without any problem? Thanks

    First things first, I would advise you to apply the upgrades, if you haven't yet done so. I remember Coldfusion MX7 to be quite buggy. We could not wait to apply the upgrades and hotfixes. Version MX7.0.2 turned out to be the lasting upgrade. We used MySQL, however, not SQL Server.
    You can get the information you want from Adobe Support. But you can think it through yourself. The way I think about it is as follows.
    Coldfusion is an application that includes database functionality. I may therefore assume that Coldusion would be backwardly compatible in its support of database server versions. In other words, a new version of Coldfusion, say 9 or 10, would work with an older database server like SQL Server 2005.
    However, I would not expect a previous version of Coldfusion, say MX7, to be compatible with newer database server versions like SQL Server 2008 and SQL Server 2012. Even if someone told me they were compatible, I would still expect such a set-up to be an accident waiting to happen.

  • Error in Remote Web Access - "An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server."

    I have set up the RWA and I can log in to the web console with my server account. However when I click on any of the shared folders I get this error:
    An unexpected error occurred.  Please try again.  If the problem continues, contact the person who manages your server.
    Does anyone know how to troubleshoot this?
    Regards,
    Maciek

    I had this very same issue with one of our customer's servers that was running Windows Server Essentials. I ended up calling Microsoft about the issue. I hope this helps someone. This originally appeared on my blog: http://techspeeder.com/2014/01/14/remote-web-access-error-an-unexpected-error-occurred/
    Troubleshooting Steps:
    1.  We were getting unexpected errors while accessing shared folders remotely
    2.  The tech found IIS handlers were missing
    3.  She went to IIS > server level ( parent level) and added managed handler mapping  :
    Name: svc-Integrated-4.0
    Request path: *.svc
    Executable: System.ServiceModel.Activation.ServiceHttpHandlerFactory, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    4. Added script mapping:
    Name: svc-ISAPI-4.0_64bit
    Request path: *.svc
    Executable: windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll
    Name: svc-ISAPI-4.0_32bit
    Request path: *.svc
    Executable: windir%\Microsoft.NET\Framework32\v4.0.30319\aspnet_isapi.dll
    5. Ran IISreset.
    6. We were able to access resources in Remote access, then.

Maybe you are looking for

  • Remote and keynoteRemote connection problems

    Hello I have installed the Remote App, and bought KeynoteRemote, but I cannot make any of them talk to my Macbook correctly. IpodTouch (2G, fw2.2.1), Remote.app (1.2.1), Macbook alu (10.5.6), Itunes (8.1.1). Ipod and Macbook are on the same Wifi netw

  • "No iPod Connected" in iTunes under Edit - Preferences

    I bought this 20gb clickwheel iPod from a friend as a Christmas gift for my boyfriend... I'm trying to install it on my PC first so I can put some songs on it so it is ready to go when I give it to him. I do not have the original software that came w

  • Computer not reading HDMI adapter

    I use a macbook (mid-2010) and use OS X Yosemite. I have used in the past an HDMI adapter to connect my laptop to my TV. However, recently my computer is not reading the adapter. The screen flashes but under devices and under sound preferences no dev

  • Group by and over partition.

    Hi to everybody.... i ahev a table like this: id name salary 1 John 1000 2 Tom 1300 3 Alan 1400 4 Mark 1800 and i do a query like this: select max(salary) from table and i have 1800 What i would like to have, is a query that return me the id, the nam

  • Problem while working wwith tree control

    hi all i am working with tree control the prolems i have been facing are i am not able o get the event for a single click on the tree node . i am displaying the purchase order in the tree and once i select on sinlge click a purchase order ,now i want