INSTALLATION CAUSES TO RESTART THE SYSTEM

Dear sir,
               I was using photoshop cs3 older version previously, Today i tried to install the photoshop cs5 version to to my laptop(TOSHIBA SATELLETE C660-22V)But while the installation process suddenly shutting down my computer,I tried it sevaral time&problem continous,I wil attach error report showed on the screen after restarting below.....
Problem signature:
Problem Event Name:          BlueScreen
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          2057
Additional information about the problem:
BCCode:          1000008e
BCP1:          C0000005
BCP2:          B2CF0703
BCP3:          BE695C40
BCP4:          00000000
OS Version:          6_1_7601
Service Pack:          1_0
Product:          256_1
Files that help describe the problem:
C:\Windows\Minidump\080213-56160-01.dmp
C:\Users\NILANTHA\AppData\Local\Temp\WER-129668-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
                                                                                                                          Please help me to solve this problem,
                                                                                                                                   thank you
                                                                                                                                    nilantha
                                                                                                                                    ([email protected])

Hi nilantha wijenayaka gamag,
The blue screen error means that there might be some issues with your machine. Please try selective startup/disable security software and proceed with installation. If still the same issue try installing in new profile. If after performing all the steps does not solve your problem then I would recommed you to contact Microsoft for Windows related issue.
However I found a Microsoft Kb for such issue: http://windows.microsoft.com/en-ie/windows7/resolving-stop-blue-screen-errors-in-windows-7 . Hope this helps.
Please conatct Microsoft for Windows related issues.
Regards,
Romit Sinha

Similar Messages

Exchange 2010 SP3 /PrepareAD failing; "A reboot from a previous installation is pending. Please restart the system..." error

I am attempting to prepare our Exchange 2010 Server (RTM) for an upgrade to SP3.
When attempting to run "setup.com /PrepareAD" to prep the AD schema, the command fails and I receive the following error in the ExchangeSetup log:
[12/19/2013 21:50:48.0650] [1] Beginning processing Get-OrganizationConfig
[12/19/2013 21:50:48.0665] [1] Searching objects of type "OrganizationConfig" with filter "$null", scope "SubTree" under the root "$null".
[12/19/2013 21:50:48.0806] [1] Previous operation run on domain controller 'DC1.company.com'.
[12/19/2013 21:50:48.0806] [1] Preparing to output objects. The maximum size of the result set is "unlimited".
[12/19/2013 21:50:49.0945] [1] Ending processing Get-OrganizationConfig
[12/19/2013 21:51:42.0753] [1] [REQUIRED] A reboot from a previous installation is pending. Please restart the system and rerun setup.
[12/19/2013 21:51:43.0190] [1] Ending processing test-setuphealth
[12/19/2013 21:51:43.0221] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[12/19/2013 21:51:43.0283] [0] End of Setup
I am receiving this error when attempting to run "setup.com /PrepareAD" from either of our two GCs and I get the same error from both GCs, so the issue doesn't appear to be related to the individual servers.
What should I be checking, to clear this error so the AD schema update can be performed?
Environment
Exchange: Exchange Server 2010 RTM
Server: Windows 2008 R2 (fully patched)
Domain and Forest functionality: Windows 2008 R2 native

One follow up:
If I go into regedit, I see that under HKLM\System\CurrentControlSet\Control\Session Manager there is an entry from when I recent installed Google Chrome.
The entry looks like:
MultiString: PendingFileRenameOperation
Value Data: \??\C:\Program FIles (x86)\Google\Chrome
Is this "pending rename" what's causing SP3 to refuse to install, because it thinks the OS install state isn't 'clean'?

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

Device object not present,restart the system and run setup again????

i install window xp sp2 in my macbook,when i install driver by mac os cd,installation run until sigmatel,it show error,the my mbp will restart automatically,and the driver installion not complete!! i try to install sigmatel idt sound driver manually,when system update the hardware configuration,it show an error message
" device object not present,restart the system and run setup again"!!!! so i can not fully install bootcamp driver in window!
any can help??
macbook pro 13" 2010 mid

Hi:
Your notebook is not supported by HP for Windows XP.
Please read the XP downgrade guide at the link below for instructions on how to get your audio to work in XP.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The specific instructions for your model series can be found in the section titled 3. Difficult Models
Paul

S430 - Configuration Changed - Restart the System

Hi there,
I have an S430 that is only a few months old and is getting daily use, and while everything with it has been rock solid so far, there have been two instances when opening the lid (to resume) has resulted in a reboot with the following message displayed:
Configuration Changed - Restart the System.
This has been a problem for me as I do a lot of work involving virtualisation and this seems to reset the BIOS completely causing the Intel VM extensions to become disabled. Of course I can update these values again and be on my way for a while, but inevitably it will happen again.
The only options I have changed in the BIOS are enabling the VT-x and VT-d virtualisation extensions, and changing the function key support to "Legacy". I am now attempting to disable the Intel AT module in the hopes that it is related. I have also noticed a BIOS point update, so am installing that at this very moment.
Is there anything else I can do to stop this from happening in the future? Or anyone else with the same problem?

Good to know, CharlyAR. I imagine it will be something specific to what I'm doing but I just hope that it isn't a hardware problem..
Something that I forgot to mention is that I always put the laptop to sleep instead of shutting it down, but sometimes when waking it up it seems to be cold booting, battery isn't an issue either.

X121e bios loop : "configuration changed - restart the system"

After changing some settings in BIOS i got stuck in a reboot - loop.
* Cannot access the BIOS any more - pressing F1 changes the message to "Entering BIOS Setup Utility" followed by the message "configuration changed - restart the system"
* F12 changes the message to "Preparing Boot Device List" followed by "configuration changed - restart the system" and the system reboots again.
* Tried to remove the battery, pressing the power button for 10-15 sec. and reboot with AC Adapter connected
* Tried to remove the battery and unplug the bios battery for 3 days the reset the bios - doesn't work
* Tried to boot via USB (BIOS update, FreeDOS with BIOS update, Ubuntu-Live-USB) - nothing worked .. didn't change the boot-order - i always prefer USB boot
* Removing hard-disk produces the message "no operating system found"
Are there any tricks for resetting the BIOS to defaults, flashing BIOS without booting from USB?
see
* http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/E-325-bios-settings-changed-keeps-rebooting/td-p/...
* http://forums.lenovo.com/t5/X-Serie-ThinkPad-Notebooks-inkl/x121e-Configuration-changed-Restart-Syst...
- there are several people with this issue ...

In service center they said that motherboard is glitchy and needs replacement.
So it was a hardware fault.

[TP x120e] Continuous "Configuration changed - Restart the system." error

I played with my bios (disabled/enabled mic, webcam, LAN and so), but after exiting the bios, Thinkpad x120e reboots continuously with the error message "Configuration changed - Restart the system.". I was not able to boot from any USB/HDD and also I can not enter to the BIOS. Hard bios reset won't help. Any ideas?
Thanks!

Hello,
Have you tried unplugging all power, including the internal CMOS/RTC backup battery, from the ThinkPad X120e, leading the unit alone for a few minutes to let any capacitors holding a residual electic charge drain, holding down the power button for 30 seconds to complete the operation, then plugging in the AC charger without either of the batteries installed, then holding down the F1 key while pressing the power button to see if that gets you into the BIOS settings?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

I'm operating CS5 on iMac 10.10.2..Q. The last two or three times I have tried to use "Merge to HDR Pro" it will not complete the task and closes down. How do I fix it...I have restarted the system but no help...RDGS, Mike Frey

I 'm operating CS5 on iMac 10.10.2.....Q.the last two or three times I have tried to use "Merge to HDR Pro" the aplication quits with no image...I have restarted the system which does not solve the problem.

Details about your setup, please.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Losing systemprofile after restarting the system

Hi,
I've been dying to know what's this is, and i don't really get it :
It happened 2 weeks ago, i "stopped" windows, and when i went to the office, the desktop vanished, no apps showing in the apps screen (don't know what it's called). And i got a message something like : "C:\windows\system32\config\systemprofile\desktop
is no available", but i found a fix, copying all the data from "c:\users" into that folder.
Why it's in two locations, users and in windows profiles ? why i lose the data when i copy the folders again and restart the system ?
I ask for an explanation and the fix to the issue, if someone knows the origin please tell me.
System :
- Windows 8.1 single language x64 (updated from windows 8 single language
- Sony vaio SVF15218SFW
- 4Gb of ram
- Intel i5-3337U
Thanks in advance.

How did you stop windows?
Is your profile setup by a company GPO to log in with a assigned domain/company user name and you want your own personal user?
This works for 8 as well, if you tried this method and your computer is a company with GPO"S set, you will need the system admin login to set the GPO not to Clear the user profile upon logout.
Stop = Shut down (sorry, french pc)
No i don't use a GPO, or a company policy, it's my own pc, I use my email to login, not a local account, Besides I get an error when i reboot : "service Service is not accessible..." something like this, i couldn't read the whole thing and it disappeared
a little while after showing, didn't have time to write or screen capture, but as you said it could be a problem with the policy to delete the profile if the pc is restarted. But it appears that even if i create a new local user, and copy all the data from
the old account "c:\users\user" into the the new "c:\users\new_user", i don't think it'll resolve the problem, because it reads the profile from config folder in system32.
When i try to open Group Policy Editor,
with GPEDIT.MSC
i get the error that it doesn't exist as a command.
If i'm the only pc user, then i'm the admin, how can i access that "GPO not to Clear the user profile upon logout".
Thanks for your answers

"Configuration changed. Restart the system" and then reboot on startup.

I have disabled WiMax in BIOS setup and now my x121e doesn't boot at all - just says that "Configuration changed. Restart the system" and reboots. When i press F1 to access bios setup - nothing happens. CMOS reset didn't help/

In service center they said that motherboard is glitchy and needs replacement.
So it was a hardware fault.

Windows Server 2008 R2 only detect USB storage drives if I restart the system

Hi, I have a Windows Server 2008 R2 with an weird behaviour. I cannot connect any USB drive (not USB external hard disk neither pendrives). Windows device manager detects the device as
Mass Storage Device, but with a yellow exclamation sign. The exact error code is:
The device cannot start.
However, if I restart the machine keeping the USB disk plugged, the hard disk (or pendrive) is correctly detected and usable.
I've tried:
Update mass storage driver.
Review HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usbstor "Start"
and is 3 (I think is right)
I've tried with different usb hard disks that are working in other PCs.
I've tried with large (>1TB) disks and small (8GB) pendrives.
I've tried all available USB ports, front and back, with same behaviour.
Always I get a yellow exclamation (Device cannot start) and if I restart the computer the device is working perfectly.
Can someone help me?
Thanks in advance
Edit: Here is the log of connecting a Kingstone USB 8GB pendrive
>>> [Device Install (Hardware initiated) - USB\VID_0930&PID_6544\C860008863DBCE801A0B24B4]
>>> Section start 2015/01/09 09:35:49.342
ump: Creating Install Process: DrvInst.exe 09:35:49.498
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 09:35:49.966
dvi: Searching for hardware ID(s):
dvi: usb\vid_0930&pid_6544&rev_0100
dvi: usb\vid_0930&pid_6544
dvi: Searching for compatible ID(s):
dvi: usb\class_08&subclass_06&prot_50
dvi: usb\class_08&subclass_06
dvi: usb\class_08
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\inf'
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Created Driver Node:
dvi: HardwareID - USB\Class_08&SubClass_06&Prot_50
dvi: InfName - C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf
dvi: DevDesc - Dispositivo de almacenamiento USB
dvi: DrvDesc - Dispositivo de almacenamiento USB
dvi: Provider - Microsoft
dvi: Mfg - Dispositivo de almacenamiento USB compatible
dvi: ModelsSec - Generic.NTamd64
dvi: InstallSec - USBSTOR_BULK
dvi: ActualSec - USBSTOR_BULK.NT
dvi: Rank - 0x00ff2000
dvi: Signer - Microsoft Windows
dvi: Signer Score - INBOX
dvi: DrvDate - 06/21/2006
dvi: Version - 6.1.7601.17577
inf: Searched 1 potential matches in published INF directory
inf: Searched 36 INFs in directory: 'C:\Windows\inf'
dvi: {Build Driver List - exit(0x00000000)} 09:35:51.900
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 09:35:51.900
dvi: No class installer for 'DataTraveler 2.0'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:51.900
dvi: {Select Best Driver}
dvi: Selected driver installs from section [USBSTOR_BULK] in 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'.
dvi: Class GUID of device changed to: {36fc9e60-c465-11cf-8056-444553540000}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description - [Dispositivo de almacenamiento USB]
dvi: InfFile - [c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf]
dvi: Section - [USBSTOR_BULK]
dvi: Signer - [Microsoft Windows]
dvi: Rank - [0x00ff2000]
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 09:35:51.916
inf: {SetupCopyOEMInf: C:\Windows\INF\usbstor.inf} 09:35:51.931
inf: Driver Store location: C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf
inf: Published Inf Path: C:\Windows\INF\usbstor.inf
inf: {SetupCopyOEMInf exit (0x00000050)} 09:35:51.931
dvi: Searching for hardware ID(s):
dvi: usb\vid_0930&pid_6544&rev_0100
dvi: usb\vid_0930&pid_6544
dvi: Searching for compatible ID(s):
dvi: usb\class_08&subclass_06&prot_50
dvi: usb\class_08&subclass_06
dvi: usb\class_08
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Selected driver installs from section [USBSTOR_BULK] in 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'.
dvi: Class GUID of device changed to: {36fc9e60-c465-11cf-8056-444553540000}.
dvi: Set selected driver complete.
ndv: Driver selected, now performing install...
ndv: {Core Device Install} 09:35:51.947
inf: Opened PNF: 'C:\Windows\INF\usbstor.inf' ([strings.0c0a])
inf: Opened PNF: 'C:\Windows\INF\usbstor.inf' ([strings.0c0a])
dvi: {DIF_ALLOW_INSTALL} 09:35:52.259
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:52.259
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 09:35:52.259
ndv: Installing files...
dvi: {DIF_INSTALLDEVICEFILES} 09:35:52.306
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:52.306
dvi: {Install FILES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
inf: {Install Inf Section [USBSTOR_BULK.NT]}
inf: CopyFiles=USBSTOR.CopyList (usbstor.inf line 173)
flq: CopyFiles from an inbox inf.
cpy: Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
flq: QueueSingleCopy...
flq: Inf : 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'
flq: SourceInf: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'
flq: SourceSection: [sourcedisksfiles]
flq: Source root path based on SourceInf
flq: SourceRootPath: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d'
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x09000000
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x09000000
flq: SourceRootPath - 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d'
flq: SourceFilename - 'USBSTOR.SYS'
flq: TargetDirectory- 'C:\Windows\system32\drivers'
flq: TargetFilename - 'USBSTOR.SYS'
flq: SourceDesc - 'windows cd'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY exit(0x00000000)}
inf: {Install Inf Section [USBSTOR_BULK.NT] exit (0x00000000)}
dvi: Processing co-installer registration section [USBSTOR_BULK.NT.CoInstallers].
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers]}
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: {Install INTERFACES}
dvi: Installing section [USBSTOR_BULK.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: {Install FILES exit (0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 09:35:52.384
ndv: Pruning file queue...
dvi: {_SCAN_FILE_QUEUE}
flq: ScanQ flags=620
flq: SPQ_SCAN_PRUNE_COPY_QUEUE
flq: SPQ_SCAN_FILE_COMPARISON
flq: SPQ_SCAN_ACTIVATE_DRP
flq: ScanQ number of copy nodes=1
flq: File 'C:\Windows\system32\drivers\USBSTOR.SYS' pruned from copy.
sig: Using catalog 'C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Package_3_for_KB982018~31bf3856ad364e35~amd64~~6.1.3.2.cat'.
cpy: DrpSetRegFileProt 'C:\Windows\system32\drivers\USBSTOR.SYS' Status=0 Class=Inbox Windows protected
flq: ScanQ action=200 DoPruning=32
flq: ScanQ end Validity flags=620 CopyNodes=0
dvi: {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
ndv: Committing file queue...
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=0
flq: CommitQ early exit: No nodes are queued
flq: {_commit_file_queue exit OK}
ndv: Registering CoInstallers...
dvi: {DIF_REGISTER_COINSTALLERS} 09:35:54.037
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:54.069
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers]}
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 09:35:54.100
ndv: Installing interfaces...
dvi: {DIF_INSTALLINTERFACES} 09:35:54.100
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:54.100
dvi: {Install INTERFACES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Installing section [USBSTOR_BULK.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: Default installer: Exit
dvi: {DIF_INSTALLINTERFACES - exit(0x00000000)} 09:35:54.100
ndv: Installing device...
dvi: {DIF_INSTALLDEVICE} 09:35:54.100
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:54.100
dvi: {Install DEVICE}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Processing Registry/Property directives...
inf: {Install Inf Section [USBSTOR_BULK.NT]}
inf: AddReg=USBSTOR_BULK.AddReg (usbstor.inf line 174)
inf: {Install Inf Section [USBSTOR_BULK.NT] exit (0x00000000)}
inf: {Install Inf Section [USBSTOR_BULK.NT.Hw]}
inf: Empty section
inf: {Install Inf Section [USBSTOR_BULK.NT.Hw] exit (0x00000000)}
dvi: {Writing Device Properties}
dvi: Provider name=Microsoft
dvi: DriverDate 06/21/2006
dvi: DriverVersion=6.1.7601.17577
dvi: Class name=USB
dvi: Manufacturer=Dispositivo de almacenamiento USB compatible
dvi: Matching DeviceID=usb\class_08&subclass_06&prot_50
dvi: Strong Name=usbstor.inf:Generic.NTamd64:USBSTOR_BULK:6.1.7601.17577:usb\class_08&subclass_06&prot_50
dvi: {Writing Device Properties - Complete}
inf: {Install Inf Section [USBSTOR_BULK.NT.Services]}
inf: Addservice=USBSTOR,0x00000002,USBSTOR.AddService (usbstor.inf line 177)
inf: ServiceType=1 (usbstor.inf line 234)
inf: StartType=3 (usbstor.inf line 235)
inf: ErrorControl=1 (usbstor.inf line 236)
inf: ServiceBinary=C:\Windows\system32\DRIVERS\USBSTOR.SYS (usbstor.inf line 237)
inf: DisplayName="Controlador de dispositivo de almacenamiento USB" (usbstor.inf line 233)
dvi: Add Service: Modified existing service 'USBSTOR'.
inf: AddReg=DeviceSpecific (usbstor.inf line 238)
inf: {Install Inf Section [USBSTOR_BULK.NT.Services] exit(0x00000000)}
dvi: Updated reflected section names for: usbstor.inf
dvi: {Install DEVICE exit (0x00000000)}
dvi: Writing common driver property settings.
dvi: DriverDescription=Dispositivo de almacenamiento USB
dvi: DeviceDisplayName=Dispositivo de almacenamiento USB
dvi: Install Device: Restarting device. 09:35:54.537
dvi: Install Device: Restarting device completed. 09:35:57.625
!!! dvi: Device not started: Device has problem: 0x0a: CM_PROB_FAILED_START.
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 09:35:57.641
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 09:35:57.641
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:57.641
dvi: Default installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0xe000020e)} 09:35:57.657
ndv: Device install status=0x00000000
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device has a PnP problem...
ndv: {Core Device Install - exit(0x00000000)} 09:35:59.201
ump: Server install process exited with code 0x00000000 09:35:59.232
<<< Section end 2015/01/09 09:35:59.279
<<< [Exit status: SUCCESS]

I tried, but windows says that the best driver is alredy installed.
Now I've just tried to delete (uninstall) absolutly all devices under Universal Serial Bus Controller
(host controllers, root hubs, etc) into Device Manager, and then I've click on
Scan for hardware changes to force reinstall of all USB drivers. After that I've connected my USB external hard disk and has been correctly recognized and its working. However I don't know if when I'll restar the server and connect a new one usb device
it will continue working or not. I'll try later, because this is a production server.
I've tried for drivers into HP site to update or reinstall, but there isn't any driver for motherboard or USB controller. It's an HP ML350 G6.

I consistently get this messsage and have to restart the system - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system". When I look at the Task Manager no Fire

I consistently get this message and have to re'boot my system. "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system"
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET CLR 3.0.04506; InfoPath.2; Media Center PC 5.0; SLCC1)

'''Kill Application'''
In Task Manager, does firefox.exe show in the '''Processes''' tab?
See: [http://kb.mozillazine.org/Kill_application Kill Application]
'''Causes and solutions for Firefox hanging at exit:'''
[[Firefox hangs]]
[http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit Firefox hangs at exit]
[[Firefox is already running but is not responding]]
'''Safe Mode'''
You may need to use '''[[Safe Mode]]''' (click on "Safe Mode" and read) to localize the problem. Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''
If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.

When I clicked on Firefox, the update bar started but when it stopped Firfox would not open. The blue screen of death popped up and said something about a new installation. We restarted the computer and now Firefox will not open. Help!

When I clicked to open Firefox the update bar appeared and an update loaded. Usually when this happens Firefox will open up when the update is finished. This time it did not open. when I clicked on the icon again the blue screen opened and said something about a new installation and if this was the first time you have seen this screen restart your computer and try again. I restarted the computer and when I clicked on the Firefox icon the "hour glass" would appear like it was trying to open but it never would open. I don't know what else to do.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

After restarting the system, WAS for ABAP is not able to connect Database

Hi,
I installed Sneak Preview SAP NetWeaver Application Server for ABAP in Local system. After restaring the desktop,I am getting following errors-
1. SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
2.Database: Database error -10709 at CON
3. Database: > Connection failed (RTE:Database name is missing)
Here, i have not done any thing except restarting the destop. before restart every thing was working fine.
please give me some clue, what may happed to the Application.
Thanks
Anil

I moved your thread from Web Dynpro ABAP to the forum for problems with the trial systems. Hopefully you will find more help here.
You didn't by any chance change machine name? I had a very similar error once when I was forced to rename my machine. Maybe you will find something from this blog helpful:
/people/thomas.jung/blog/2006/02/03/as-abap-sneak-preview-lessons-computer-rename

Diagnostics Agent installation - which SID for the systems in your landscap

Hi,
I have a question in regads to installing the Diagnostics Agent on the systems in your landscape: ie. I want to install the Diagnostics Agent on all systems, and SAP suggests the system ID "DAA" as standard sid. From my experience there are no errors or exceptions when I use the system id DAA for a few or all systems.
However, will I run into problems later on (for example, when using root cause analysis, etc.)? Can I use the standard system id DAA for several systems/hosts, or should I use a seperate system ID (DAA, DAB, DAC, etc.) for each Diagnostics Agent?
thanks,
Walter

Hi,
We have used same SIDs (the default DAA) for a few hosts in our landscape and this did not cause a problem.
But in my opinion best to use DAA, DAB, DAC etc in order to remove any room for confusion for both the humans and the systems
Regards,
Srikishan

INSTALLATION CAUSES TO RESTART THE SYSTEM

Similar Messages

Maybe you are looking for