Installation CD wont work with windows 7

i have the drivers and the console launcher from the download section..
but
i want the THX setup console for the time alignment.
i put the disc in and it said the operating system is not supported.
i went to the THX console folder to run the setup and it gave me an error.
where or how am i supposed to get the THX setup console back?
**edit**
the soundcard is an x-fi elite pro

the auxilery power tab is connected to the card.
i uninstalled the pax drivers, ran the driver sweeper tool, rolled back to the most recent non-beta drivers.
the spdif input is still greyed out.
creative support is simply going to have to send me a file that unlocks the feature again.
i suppose if there was any chance to install TRUE dvd audio .. that would warrant the necessity to re-enable the function.
i dont see any reason to install those drivers you are offering.
there doesnt appear to be any difference with the audio quality.
not only do i regret installing the drivers.. i feel stupid for leaving creative's side .. and i am being treated as such.
i do not need a pile of rubbish that aformentions the money i spent.
nvidia drivers are crapping out and causing problems.. here's to video problems.
now creative drivers are crapping out and causing problems.. here's to audio problems.
STOP PROSECUTING ME.
(dont you have enough food out there in the world already? .. or are there too many in power that are too numb/dumb to realize reality?)
creative support will have to come along and do their job.
uber techno babble is mediocre for the relevency of that which you vomit it.
how upsetting comcast has absolutely nothing to watch throughout the duration of the 30 day billing period.. so i want to use the cable box for some music, and there is a massi've repurcussion in my way - as if i am to be punished.
slap the taste out of your mouth when you talk to me.

Similar Messages

  • Hp design jet 430 wont work with windows 7

    hELP, i HAVE BROUGHT A USB CONVERTER FOR MY HP DESIGN JET 430 BUT THERE IS NO SOFTWARE TO ALLOW IT TO WORK WITH WINDOWS 7....OR AM I MISSING SOMETHING????

    Hello @johnfaulkner36, 
    Welcome to the HP Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since the HP Designjet 430 is a commercial product. You can do this at HP Enterprise Business Community.
    The support page for your product may be helpful in the meantime:
    HP Support Center.
    I hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Webcam on Equium A300D wont work with Windows live

    The camera works fine, but when try to use it as webcam on Windows live it doesnt work.
    This is new problem as has worked ok with Windows live in the past, and dont know why it wont work now.

    Is there some error message or something?
    When you have noticed this have you tried to roll back OS to earlier time when everything was OK?
    Maybe some Microsoft update is responsible for this.
    Exit camera assistant software and try to use it again. I use cam with Skype and MSN but camera assistant software doesnt start with windows and is also never started.

  • Itunes wont work with windows 7

    i tunes wont run on windsws7

    I'm having the same problem with Windows 7.  I'm not sure what information I should post to make diagnosing this problem easier.  (I'm not very tech savy.)  I have a 16GB Itouch and I'm running the 10.4.1 version of Itunes.  I've tried using Itunes' diagnostic tools but it just doesn't see my device.  Any advice?

  • L7680 driver installation wont work with Windows 8.1

    I recently bought a new HP Pavilion laptop and updated to windows 8.1 not long after the purchase.  I tried to install my Officejet Pro L7680 all in one printer today and was unsuccessful on every attempt.  The driver/software will download but when I attempt to install the software I get a message of "cannot find file specified".  I called HP and spoke to a rep who informed me that my printer was too old and wasn't compatible with the Windows 8.1 system.  He said there was no update available for my printer and basically I would have to buy a new printer.  Bad answer!!! 
    The issue is a missing file from the Preload Drivers folder: Msiexec.exe
    Please help me find a way to install my printer
    This question was solved.
    View Solution.

    Hi exumsta
    Yes the anitivirus software could be causing issues.
    I would make sure it is turned off during the installation.
    Here is a url to temporarily disable all the start up programs to see if one of them is causing any issues.
    http://theunlockr.com/2012/04/05/how-to-change-windows-8s-startup-programs/
    You will have to follow the same steps to enable all again.
    Let me know how that goes.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • My ipod nano 4GB wont work with windows xp!

    hey guys.im new to this whole ipod thing and have been trying for 6 days to get itunes 7.6 to download but it wont!!! i have service pack 2 and im pretty sure i meet all the other erquirements. everytime i try to download it, my computer says it is "not a valid Win32 application." please help! i've tried everything!

    Hey zeobia-ipodnano,
    Try deleting the temp files and then downloading iTunes again as described here:
    http://support.apple.com/kb/TS1406
    When the window pops up asking if you want to run or save, choose save. Then run the installer after the save completes.
    Jason

  • Itunes update wont work with windows 8.1

    after i updated my laptop to windows 8.1 my itunes has been acting wacky. It only plays music and wont reconized or sync my iphone 4s anymore. Im not sure who to complain to because i updated both im not sure if its windows or itunes PLEASE help i havent been able to put music on my iphone for 2 weeks x_x  

    Hi there tshaw95,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W.

  • Hp photosmart c3180 wont work with windows 8 consumer preview

    I have tried installing the printer but when i plug the usb in it just tells me that a printer is connected but I am unable to actually print any documents with it.

    I've just managed to fix the problem. I think the issue was that when it was first plugged in via usb it didnt install correctly, so depsite recognising the printer it wouldnt allow me to print. I removed the device from 'printers and devices' and reinstalled the printer, it now works fine. thanks for your help.

  • HP LaserJet 6L won't work with Windows 8

    Good afternoon all,
    Right I inherited this great little printer last year, it worked great with Windows 7 but now it wont work with Windows 8, it appears to be installed and the drivers are all up to date but when I use it to print a pile of random characters come out on the pages and doesn't stop. I've reinstalled it and installed it again and again every different way but it just doesn't work and HP says that it is compatible (there is a green tick beside it somewhere on your website). Could it be that I'm using a cable that is parallel at the printer end and USB at the computer end that is at fault?
    James.

    I had the same problem, and fixed it.
    Control Panel - Devices and Printers
    Click on "Add a Printer"
    Click on "The printer that I want isn't listed"
    For USB connection, choose "Add a local printer or network printer with manual settings"
    Pick an existing port.  I use a cable that has LPT port at one end, USB at the other end.  So my choice is USB001 (Virtual printer port for USB)
    Now you see the list of manufacturers and models.  Before doing anything, click on "Windows Update" and let it run (takes a few minutes)
    Once the update is complete and you're back to the list of manufacturers and models, select HP as the model, and select HP LaserJet 6L as the printer.  Without Windows Update, it will only show "HP LaserJet 6L PS Class Driver", which causes the problem.  Stick to "HP LaserJet 6L"
    The rest is straight forward.  Print a test page and check if it comes out right.  Good luck!!

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

  • ITunes 12.1.1 does NOT work with Windows - Fix??

    Hi everyone,
    I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
    After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
    iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

    The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly.  Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components.  It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version.  I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

  • Secondary display does not work with Windows...

    Ive been using a samsung syncmaster 920nw as my secondary display for the past few months. It works fine while running OS but when I switch over to Windows XP the display goes blank after startup. I have installed the proper drive and updated it whenever possible, but with no effect. I have tried to follow the troubleshooting prompts and pretty much everything else I could think of. Im out of ideas. I didnt buy the monitor to sit on my desk and take up space... Any help would be greatly appreciated.

    Still no luck... Has anyone else experienced this problem while running Windows through bootcamp? Is it possible there's a compatibility issue with XP vs. Vista? The display is new and bears the mark "Works with Windows Vista". Could that mean it wont work with XP? I obviously don't use Windows that often, but seeing as I purchased the monitor as a secondary display, it would be nice to be able to put it to use in Windows too. Thanks anybody...

  • Microsoft Mail not working with Windows 7 & MS-Office 2010

    Dear All
    I have a client who is using Microsoft Mail for their internal mailing. They have been using MSoffice ( Outlook) for this purpose for last so many years.
    We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
    When you try to configure it given error 0x8004110.
    When we tried with different versions, we found that if you install Office 2007 it works. If you try Office 2007 and then Office 2010 and remove Office 2007, it still work. But Then it is treated as 2 installations of Msoffice on the same computer.
    I need to know whether this is right from Licensing perspective.  We 'll be using single copy of office but it may seems as we have installed Office 2007 & office 2010 on same computer.
    --Shekhar

    We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
    When you try to configure it given error 0x8004110.
    Windows 7 is a supported operation system for Office 2010. At what exactly point will you get the specific error?
    Is that a Click-To-Run version of Office 2010? By default, for MSI-based version of Office, when you upgrade existing Office 2007 to Office 2010, the earlier version of Office will be removed:
    http://office.microsoft.com/en-us/excel-help/keep-earlier-versions-of-office-programs-when-installing-office-2010-HA102597134.aspx
    For licensing advice, as <Don> suggested above, you should contact your local Microsoft customer support or reseller.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Does icloud work with windows live 2009

    i can't get icloud to work with Windows live mail 2009, does it only work with 2007 & 2010?  after two days of trying to connect to icloud I finally got it working, only my contact from my pc wont show up, only update for Windows mail I can find is a 2011, will it work with that version? I could use any & all the help you can give.
    Thanks elow

    It only works with Outlook, 2007 or 2010.

  • Drag and Drop not working with windows 8.1

    we using windows 8.1 for a few days now
    so we installed visual basic .net 2012 and starting our projects again we used in windows 7
    but now it seems that the drag and drop doesn't work in windows 8.1
    we only gets a forbidden icon when we drag it over the control
    please can someone tell us why windows 8.1 won't work with drag and drop
    we hope this can be fix in anyway because we don't like when our users use our programs
    and tell us that this point wont work in windows 8.1
    our code:
    Private Sub FlowLayoutPanel1_DragDrop(sender As Object, e As DragEventArgs) Handles FlowLayoutPanel1.DragDrop
    If (e.Data.GetDataPresent(DataFormats.FileDrop)) Then
    e.Data.GetData(DataFormats.FileDrop)
    End If
    End Sub
    Private Sub FlowLayoutPanel1_DragEnter(sender As Object, e As DragEventArgs) Handles FlowLayoutPanel1.DragEnter
    Try
    If (e.Data.GetDataPresent(DataFormats.FileDrop)) Then
    e.Effect = DragDropEffects.Copy
    Else
    e.Effect = DragDropEffects.None
    End If
    Catch ex As Exception
    Exit Sub
    End Try
    End Sub
    Thank you.
    Dummy
    p.s
    we also got help from social msdn
    here the topic who all answered.
    social
    mdsn

    Hi,
    Welcome posting in TechNet forum.
    Do you mean the drag and drop action of files within different application?
    We may take a try to disable the UAC settings and see if the drag and drop would work. And please note if we have UAC disabled, Windows Store APPs would be expected not going to work.
    For the coding edit stuff, I suggest we keep focus on the MSDN thread.
    Best regards
    Michael Shao
    TechNet Community Support

Maybe you are looking for

  • F-02 (customer payment)

    Hello, please, is posting incoming payments possible in tr. F-02 in "Fast entry" ? We try to use posting code 15 "Incoming payment" but receive error message "Enter a posting key for G/L accounts". Is it possible somehow to set tr. F-02 for posting t

  • I-tunes wont start just a message "i-tunes has encounter a problem"

    Could someone please help everytime i start i-tunes i keep getting a message "i-tunes has encounter a problem and needs to close" ive tried to reinstall but no joy, my system seem to be fine has no problem anywhere else. Thanks in advance skylog.

  • Clearing of Vendor Open Item

    Dear all, After I have done MIGO and MIRO for the PO. May I kown how to clear the Vendor Open Item found in F.41? Thank you.

  • Mail Adapter: XIALL and attachments

    Hi All, I have a scenario with Sender Mail adapter, where I need data from both the Mail and the attachment. I tried using XIALL, but get a SAXParserException. Is there any other way that I can use both Main Payload as well as Attachment fields? Rega

  • Trouble with help button

    I cannot access help.  I have Adobe Elements 7 and each time I try to use help I get the message "The requested help topic could not be found, Reinstall to fix the problem.  I have reinstalled and still get the same message. How do I resolve this?