Installation CR2008 trial error message in Windows 7.
Hi,
Current window : Windows 7
I have install crystal report 2008 trial version in windows 7 and the error message:
1) When i open my project in vb6 error msg : c:\windows\system32\crystl32.ocx could not be loaded -- continue loading project?
2) then i went project,component and select the crystl32.ocx error message(Crystl32.ocx was not registerable as activex component).
please assist.
Thank you.
Hello,
The OCX was retired about 10 years ago. In CR 2008 your only option is to use Crystal Reports .NET Assemblies and move to Visual Studio .NET 2008.
Moved your post to the Legacy SDK forum
Don
Similar Messages
-
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR, -
I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!
You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org -
i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system
In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application. If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work.
So, fire up Internet Explorer
Go here: http://get.adobe.com/flashplayer/
Follow the prompts, and then re-launch the application after you've completed the installation in IE. Hopefully that sorts it out for you. -
When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?
after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok. -
Installer encountered an error: 0x80096002 on windows 8.1
hello,
I am trying to install Windows Installer 4.5 [windows6.0-KB942288-v2-x64] on windows 8.1 which is pre-requisite for installation of "Microsoft® SQL Server® 2008 Express with Advanced Services"
I am getting below error while installing Windows Installer 4.5
"Installer encountered an error: 0x80096002 on windows 8.1"
I tried to add the feature "Windows Identity Foundation 3.5" in order to resolve the issue
But it didn't help
PLs assist
Thanks
PadolHi Padol,
Since the issue regards Widows 8.1. I will help you move the question to the related forums at
http://social.technet.microsoft.com/Forums/en-US/home?forum=w8itprogeneral . It is appropriate and more experts will assist you.
Thanks for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
When i try to install i tunes i get error message 7 windows error message 126
When i try to install i tunes i get error message 7 windows error message 126
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99304) -
trying to add Itunes match, and am almost at the end of installation when an error message pops up. it says error 4010 cannot connect to ittunes store at this time try again later. what is the problem?
Contact Apple support for warranty service.
-
I keep getting the error message "Restore Windows" When I click an icon on the desktop on my Mac Book Pro, it is not reaponding.
While holding down the option key, select "Go>Library" from the Finder. Navigate to the Preferences folder and you'll find "com.apple.finder.plist". Delete that file and restart.
Good luck,
Clinton -
Does anyone know how to correct the download for itunes error message 7 windows 193?
I'm getting error message 7 (windows 193) when I download new itunes update.
Try Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
I have a (legally purchased) disc with InDesign CS6 that I want to install on a PC with Windows 8.1 (64-bit). After I've double-clicked the Set-up.exe file on the disc, a box is displayed showing the progress of the initialization of the installation program. When the coloured bar in the box is full – indicating that this step is completed – the installation stops and nothing more happens. No error messages are displayed.
I can't find any useful instructions in the Adobe Help pages more than a note that there is support for also Windows 8.1 even though the system requirements printed on the disc box only lists Windows XP and Windows 7. I don't know how to make this work. Does anybody here have any suggestions? I'd be ever so grateful for any tips.Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[ 8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[ 8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[ 8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ... -
Oracle 9.2 installation error message on window XP:
Hi all;
I am new to oracle and try to install oracle 9.2 on window XP professional. Everything went well except the error message:
Tehre is no non empty value found for variable j_Servport in \oracle\ora92\Apache\Apache\ports.ini
Here is the content of my ports.ini file ================================================
[Ports]
s_apachePort = 80
s_apachePortSSL = 443
[Ports]
s_apachePort = 80
s_apachePortSSL = 443
[Ports]
s_apachePort = 80
s_apachePortSSL = 443
s_jservPort = 8007
[Ports]
s_apachePort = 80
s_apachePortSSL = 443
s_jservPort = 8007
======================================
After the installation completed I was able to connect to my sql*plus and do some excersice. However, I connect to isqlplus (web access). I did follow the rule to connect to http://localhost:7778/isqlplus but the page didn't work.
Any suggestion?
Thanks.
LeahThe error message was:
Syntax error on line 92 of c:/oracle/ora92/sqlplus/admin/isqlplus.conf
FastCgiServer: redefinition of a previously defined FastCGI server
c:/oracle/ora92/bin/isqlplus
Here is my isqlplus.conf content
======================================================
# Copyright (c) 2001, 2002, Oracle Corporation. All rights reserved.
# NAME
# isqlplus.conf
# PURPOSE
# Oracle HTTP Server directives for the iSQL*Plus server
# USAGE
# This file should be included in the Oracle HTTP Server
# "oracle_apache.conf" file.
# Enable handling of all virtual paths beginning with "/iplus/"
# Note: only /iplus/ is mapped, /iplus is not being mapped
<IfModule mod_alias.c>
Alias /iplus/ "C:\oracle\ora92\sqlplus\admin\iplus/"
# Disallow users from trying to access /iplus/ directory listing
<Directory "C:\oracle\ora92\sqlplus\admin\iplus">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
# Maps all virtual paths beginning with "/isqlplus*" to the iSQL*Plus
# FastCGI application
<IfModule mod_alias.c>
ScriptAliasMatch ^/isqlplus(.*) C:\oracle\ora92\bin\isqlplus
ScriptAliasMatch ^/isqlplusdba(.*) C:\oracle\ora92\bin\isqlplus
<Directory "C:\oracle\ora92\bin">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
# Enable handling of all virtual paths beginning with "/isqlplus"
<Location /isqlplus>
SetHandler fastcgi-script
Order deny,allow
# Comment "Allow ..." and uncomment the four lines "AuthType ..."
# to "Require ..." if Oracle HTTP authentication access is required
# for the http://.../isqlplus URL
Allow from all
#AuthType Basic
#AuthName 'iSQL*Plus'
#AuthUserFile C:\oracle\ora92\sqlplus\admin\iplus.pw
#Require valid-user
</Location>
# Enable handling of all virtual paths beginning with "/isqlplusdba".
# Note: Oracle HTTP authentication access must be configured to
# prevent unauthorized users performing DBA operations on
# the database
# Use the HTTP server utility script "htpasswd" to add users to the
# "iplusdba.pw" file.
<Location /isqlplusdba>
SetHandler fastcgi-script
Order deny,allow
AuthType Basic
AuthName 'iSQL*Plus DBA'
AuthUserFile C:\oracle\ora92\sqlplus\admin\iplusdba.pw
Require valid-user
</Location>
# Setup the iSQL*Plus FastCGI application.
<IfModule mod_fastcgi.c>
FastCgiServer C:\oracle\ora92\bin\isqlplus -port 8228 -initial-env iSQLPlusNumberOfThreads=20 -initial-env iSQLPlusTimeOutInterval=30 -initial-env iSQLPlusLogLevel=off -initial-env iSQLPlusAllowUserEntMap=none -idle-timeout 3600
</IfModule>
==============================================
I did reinstall a few times if this would give you some hints.
Thanks.
Leah. -
Installation of Elements 9 error message with Windows 7
I have just purchased Photoshop Elements 9 in a factory sealed box. I have Windows 7 loaded onto a Lenovo ThinkPad that has more than Elements 9 requires to install. I have tried to install it five times and always get the same error message as follows:
Adobe Photoshop Elements 9 – Setup
Error 1935. An error occurred during the installation of assembly component
{97F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRESULT:0x80070BC9.
What is the problem? I am very frustrated.
LeslieMylenium....
Blessings on you. I am very far from being any kind of a geek when it comes to computers, so I was intimidated when I looked at all the details contained in the link you provided. However, I did do the first and simplest solution which was to restart my computer. I confess to only doing this when necessary (the first thing one does when something does not work correctly) or when instructed to with updates. My last Windows update did not tell me to restart and so I did not. When I did it this morning there were two notices that came up on the restarting screen that do not usually appear. One had to do with configuring Windows updates and the other spent a long time doing something called "Cleaning Up." I restarted the installation CD and everything went as it was supposed to. thank you so very much.
Leslie -
TS3212 Installation package could not be opened. error message. Windows 7 64 bit
iTunes failed to run after using it successfully for over a year on this laptop running Windows 7 64 bit. Numerous attempts to download after uninstalling iTunes results in the error message below. Unable to install Safari as well, same error message.
Receiving the following message:
"This installation package could not be opened. Verify that the package exists and that you have access to it, or contact the application vendor to verify that this is a valid Windows Installer Package."Nope, that's not it. I've got the same issue, or close to it. The update downloads, a message box opens stating that the file has an invalid signature, and the installer file is deleted. 10.6.3 has attempted to update numerous times, all with the same result. Update is up-to-date, downloading the file always produces the same result and every so often iTunes update comes up to repeat this process. With the volume of posts regarding this issue, why is it that the assumption is always to 'reinstall (repair) the software.' Why doesn't anyone take a look at whether something's broken with the upgrade? Too much trouble? You should try attempting to repair installs once a week or so, now _that's_ a hassle.
Maybe you are looking for
-
I have an old iPod that has a different Apple ID than my iPhone. How can I put all the music on my iPod and get it off my phone? I'm not sure how to mix the music from two different apple id's.
-
Way to get access to the context menu
I assume there is no official way to get access to the context menu, so you can add a menu item when, say, you right-click on a photo in the publish service collection. You can tweak the behaviour for the two existing items, but there does not seem t
-
Units from the additonal data tab of the material master
HI Gurus, can anybody please tell me how we can pull the units from the units of measure tab of the additonal data data tab of the material master? Thanks Anusha
-
How to add picture in garageband 10.2?
Hi, I've just updated my garagaband to a new 10.0.2 version and I cant seem to find a photo option in the media browser, they have videos and music but no photos? Also where is their podcast setting option. Im running a mac os 10.9.2 system. Can anyo
-
Manual removal of iMovie - then can't reinstall
Needing to make more room on the main drive I manually removed iMovieHD. Wanting to reinstall it i could see no way except to reinstall the whole OSX Tiger. But iMovie did not re-appear !! Was it because it wasn't there at re-install time so it only