Installation disk will not open or autorun.

Brand new installation of sbs 2011 premium add on (SBS 2008 R2) on dell power edge box. Ready to install SQL Server 2008 R2 (disk 2 of the premium add on package). DVD drive will not open or browse contents of installation disk. DVD drive on new server
reads/opens all other disks, AND the SQL install disk opens in any other machine. This is a new, never installed retail set of disks. Anyone have any ideas? Is there some kind of software protection on this cd that would cause it to not open on the
machine that has the companion OS disk installed?

Hi DavidCraig,
As mentioned in this
article, we can install SQL Server 2008 R2 on Windows Small Business Server 2011. And according to my knowledge, there’s no specific software protection on the cd.
From your description, DVD drive will not open or browse contents of installation disk, have you got any error messages?
Besides, could you please copy the SQL Server setup files (which are extracted successfully in other machine) to Windows Small Business Server 2011?
 Then check if you can install SQL Server 2008 R2 on the server.
Thanks,
Lydia Zhang

Similar Messages

  • Creative Cloud installs but will not open on windows 7

    Creative Cloud installs but will not open on windows 7

    Bill's gill what specific error message do you receive when you attempt to open the Creative Cloud Desktop application?

  • Installer Disk Will not Quit and Will not Eject. Please Help!

    I did a really stupid thing today: I tried to install Leopard on my iBook G4, not thinking/realizing that it needs more RAM than it has to be able to install it. Now, 10 hours later, the installer disk will not quit and I can find no way to eject it. I have shut down the computer several times and then restarted while holding down the mouse button, but the **** thing just starts cranking away again. At some point, I was able to pull down and choose Quit for the Installer; eventually, a thing came up giving three options: I think they were "restart" "choose startup disk" and "don't quit." I followed the directions that also appeared and clicked "choose startup disk." It has continued to chug away for the past hour after doing that. Is there any hope that I can
    a. recover my poor little iBook
    b. recover the Leopard Installer Disk? I sincerely hope not to have to buy another one!
    Thanks.

    There was another thread on this very topic recently, and many things were tried, but I don't know if anything ever worked and I was unable to find that thread.
    However, here is something from the MBP forum that sounds like it might also work for an iBook:
    DVD Stuck in MacBookPro--Silver Mac
    http://www.silvermac.com/2006/dvd-stuck-in-macbook-pro/
    Good luck!

  • Installer window will not open. cannot install firefox

    I cannot open the installation window. firefox wasn't working so I've uninstalled it and now i'm trying to get it again and it simply will not open the installation window. Clicking and clicking and nothing! GRR

    Try downloading the full offline Firefox installer from https://www.mozilla.org/en-US/firefox/all/

  • Is there a Data Execution Prevention compatable version of iTunes?  I have reinstalled iTunes 10.5 at least 10 times, and after it installs, it will not open because of DEP.

    I have tried all the advice I have seen on Apple Support discussion boards for the past 2 days, and nothing works.  Disabling DEP is not possible, regardless of what the Windows Support discussions tell you.  In the meantime, I have absolutely no access to iTunes, or even the ability to update my iPhone or iPod.  The only feasable solution is the possibility of a version of iTunes that is compatable with Data Execution Prevention settings. 
    In the past 2 days, I have:  Removed iTunes and related components from the Control Panel (numerous times)  Per the instructions on Apple Service discussions pages, I did it in this order.  1. iTunes  2. QuickTime  3. Apple Software Update  4. Apple Mobile Device Support 5. Bonjour ^. Apple Application Support.  After all that, I reinstalled iTunes. 
    Everything looks fine during installation, with no error messages.  At the end, it says everything was successfully installed.  However, when the installation tool closes, iTunes will only partially open a window, but will stay blank.  Then I get the message that iTunes has stopped working and that Windows has shut it down.  Then I get notified that DEP has caused iTunes to shut down. 
    Can someone please help?  Or, is there a DEP compatible version of iTunes? 
    I would appreciate any help.  Thanks!!

    Polydorus,
    Thank you for your kind reply.  During the many times I uninstalled iTunes, and all the other Apple programs, I only used the Uninstall Programs in Windows Control Panel.  To make a long story short, I found a solution that works for me, but it is still not a complete soluton.
    Here is what I did:
    I used Uninstall Program in the Windows Control Panel to uninstall everything IN THIS ORDER
    1. iTunes
    2. QuickTime
    3. Apple Software Update
    4. Apple Mobile Device Support
    5. Bonjour
    6. Apple Application Support
    Then I went to C:\Program Files and looked for any iTunes or Apple program listed there and deleted it.
    I have 64-bit, so I then went to C:\Program files (x86) and looked for any iTunes, QuickTime, Bonjour or any other file or folder that had Apple or any Apple program in the name and deleted it.
    I went to C:\Windows|SysWOW64\Quicktime  and C:\Windows\SysWOW64\QuicktimeVR and deleted them
    Go back to START, and open the "C" drive.  Open the USERS folder.  Open the folder with your username.  Open the AppData folder.  Then double-click on the LOCAL folder to open it.  If you see any files or folders there that show any Apple program or file, delete those files or folders.  Then go to the REMOTE folder and do the same.  If there are any other users on this computer, go to each individual user and do the same thing in each LOCAL and REMOTE folder.  Restart your computer.
    Go to http://www.apple.com/itunes/download/ This is the page where you will actually download iTunes.  Scroll down the page to the section under "Windows Software"  that says "64-bit editions of Windows Vista or Windows 7 require the iTunes 64-bit installer".  Click on that line to get the installer.  It will take you to another download window.
    Scroll to the bottom of the page to the message that says "Download for iTunes 10.4.1 for Windows (64-bit) here: iTunes for Windows 64-bit."  Click there to get the download.
    This is not iTunes 10.5, so you will not have access to "The Cloud", but it is at least functional until Apple actually comes out with a version that will not activate the DEP message.  There was no combination of uninstalling and reinstalling, with or without Quicktime, with 10.5 that did not cause problems with Data Execution Prevention problems that I found.
    I also used Firefox for the downloading instead of Internet Explorer.  It just seemed to function better that way.
    I hope this is helpful to someone.  It's just what worked for me.   

  • ITunes 7.6 installs but will not open

    I successfully installed iTunes 7.6 and when i go and double click on the iTunes icon on my desktop, the program will show up in Task Manager but will not show up on my desktop. I am running Media Center on this computer and wanted to know if any other computers running Media Center have encountered this problem? Any help would be nice =)

    a_porcupine
    The page covers BOTH hangs during startup and freezing while already running.
    The page contains a link to this article on startup problems.
    http://docs.info.apple.com/article.html?artnum=305491
    One of the key steps is to determine if the problem is account specific or system wide, that takes you down two different paths.
    The other thing you can do is to check that QUicktime works as iTunes will not work with out it and also if iTunes.exe persists on the processes tab of the task manager when you try to start iTunes, even though iTunes does not actually start.

  • Once installed it will not open

    i installed iphoto '11, after installation it will not open.  It seems like it wants to open but the icon merely continues in a circle and does not open,

    Have you run software update to be sure it is up to date?
    LN

  • Installed 10.4 update and itunes will not open

    Installed itunes10.4 32 bit version - after successful installation itunes will not open
    any advise?

    Update to my last post.  I have finally "fixed" whatever problem was causing the Apple software products to malfunction on my PC, Windows Vista 32 Bit SP2.  After updating to iTunes 10.4 and Safari 5.1, a series of error messages would appear:1) AppleSyncNotifier.exe 2) iTuneshelper.exe 3) iTunes Failed to properly install - Error 7 (Windows error 126).  I had tried uninstalling and reinstalling iTunes & Safari as well as downdating iTunes to an earlier version, but this had all failed to correct the problem and the error messages still appeared when the programs were suppose to have been removed. 
    I ended up using the Windows Program Manager (in Control Panel) to remove every single Apple product from my PC, including the Apple Installer.  Then I restarted the system.  Taking bits and pieces of advice from this forum, I started the system, went to the Apple website, downloaded and SAVED the newest iTunes version (which includes QuickTime), but did not run the program.  Then I disconnected from the net, turned off all virus and firewall protections, and finally installed the saved iTunes program.  It took an extraordinarily long time to complete the install, but I was able to restore my libraries from my iPod Touch (4th gen) by performing a simple sync.  I reconnected to the net and updated the device software . . . so far, so good [knock on wood], no error messages yet.  I will add each of the removed programs as they are needed in the future so that whatever conflict exists can be fixed - until then, I'm at least happy to have iTunes back!  Hope this is helpful to someone and saves them the 4 hours it took me to get back on track

  • I have a partition on my IMac disk and Windows 7 loaded on one partition.  I tried to open and W7 will not open and cannot repair itself.  Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

    I have a partition on my IMac disk and Windows 7 loaded on one partition.  I tried to open and W7 will not open and cannot repair itself.  Is there a diagnostic/disk repair from Apple that I can try before reloading W7?

    Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

  • Disk utility, software update, garage band,  security, etc. will not open.

    I tried to update my itunes about 2 weeks ago. it started downloading, maybe it did all the way, i dont know. because everything stopped working. i can use safari/firefox, office programs and some others but when i try opening disk utility, software update, security (and other programs) they will not open. they come up in the bar at the bottom of the screen for a second then vanish with no warning or error (and no program actually opens).
    at first i just deleted itunes completely thinking that was it but now I cant even download that again, as I cant use disk utility to open in.
    also, i cant backup my files, i have no way. if i run the reinstall disk will it delete all my files or is there a way to only modify files?
    thanks in advance for any advise!

    Hi, and a warm welcome to the forums!
    Qyuick, do thus 1st...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then boot off the HD and...
    About Disk Utility's Repair Disk Permissions feature...
    http://docs.info.apple.com/article.html?artnum=25751
    Reboot needed if many Permissions are fixed, and possibly reapply latest Combo Update also.

  • When i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes

    when i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes

    Hi lvdmerwe!
    I have two articles here for you that should be able to help you troubleshoot this issue further:
    Trouble adding music to iTunes library or importing audio CD
    http://support.apple.com/kb/ts1387
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/ts1277
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

    My external hard drive will not open and only shows up in Disk Utilities. When I try yo repair it, it give me and error of invalid sibling link. How do I fix my external hard drive?

    Invalid sibling link may not be fixable by Disk Utility. (Disk Utility is very conservative, and will not attempt repairs that might cause you to lose data.)
    It is an indication of serious Directory damage.
    that leaves
    a) third-party Utilities that will take those risks, or
    b) re-initializing the drive (which deletes all your data) and restoring from another backup source.
    c) "Copying off whatever files you can salvage" has gone by, and you cannot copy anything off a drive that will not mount. You may be able to use "rescue" programs such as prosoft engineering Data Rescue to copy files to another drive, but that sounds a lot better than its reality. You may get many files, but not get ANY filenames.

  • Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

    will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

    Can you attach a screenshot or link to the instructions you are following?
    You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

  • Digital Editions 4.0 will not open after installation on Windows  XP laptop.

    Digital Editions  4.0 will not open after installation on Windows XP laptop.  DigitalEditions 3.0 installs and opens fine.  Have tried 4.0 several times.  Removed 3.0 and 4.0, reboot, reinstall 4.0 still will not open.  Error message says Windows has experienced and problem and requires that Digital Editions must be shut down.

    Solved my own problem. It was necessary to delete all instances of Adobe Digital Editions in programs and  the registry. After doing so and reinstalling 4.02...., it became available in the "open with" dialogue box and became the default epub reader.

  • My iTunes keeps will not open. It sais that iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it!!??!!

    My iTunes keeps will not open. It sais that iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it??

    My iTunes keeps will not open. It sais that iTunes Library Extras .itdb file is locked on disk or I don't have permission to open it??

Maybe you are looking for

  • New pc won't recognize my ipad in itunes

    pc crashed bought a new pc. itunes won't let me sync my ipad to new pc, as it is associated with another library. any way to get new pc to accept ipad without losing files on ipad?

  • Final Cut Pro 7 exporting adds frames before transitions.

    When I export a movie from my sequence the movie adds one or two blank black frames before the transition starts. It does not happen when I render the video out and watch it (preview). It only happens when I export the movie. There are NO breaks in m

  • MBP switches spaces when returning from screen saver

    When I move my finger minimally across the touchpad to bring my screen out of screen saver, invariably my MBP decides to shift spaces to the next to the left or right. It is annoying.

  • IDVD 6 QUITS WHEN TRYING TO OPEN PROJECT INFO

    HELP!!! Every time I try to open project info from the projects tab, the program always quits. I ran the apple hardware test today, and everything is good. Has anyone had this problem, or have an answer? Quicksilver dual processor 800   Mac OS X (10.

  • Regarding user session...

    Hi, How will you determine/set the duration before a user session gets expired in an application on Oracle 10g release 3? Is there a specific entry which is to be made in a file? Thanks and Regards, Sarab