Installation EBS 12.1.1

Running Rapidwiz gives error " No Technology stack components have been selected for the install

Hi use;
MD5sum check MD5 Checksums for R12.1.1 Rapid Install Media [ID 802195.1]
For installation also see my blog:
http://heliosguneserol.wordpress.com/category/step-by-step-oracle-e-business-suite-installation/
Regard
Helios

Similar Messages

GRC Installation : Ebs 12.1.1, GRCC & GRCM on same machine

Is it possible to install EBS & GRCC & GRCM on a single machine (intel i3 – 2100) that runs on i) win 64 ii) win 32 ?
Is above possible on linux 64-bit ? Or do I need 2 machines if so what to install where ?

What you describe is not a supported setup. Please refer to Note ID 741001.1: GRC Suite Support Matrix on support.oracle.com to find out what is acceptable and supportable.

9iAS multi-node install (Rel 1)

Can anyone point me to a link that gives the steps of taking the DB tier of an existing 9iAS (Rel 1) install to a new DB on a new box? A little more than just the concept level.
I thought that the answer would be in the standard install guides . or, Metalink . . . But I have only found one brief mention that says the OUI handles the installation of just the DB tier (8.1.7) on a new box. (I know there is a lot more than just selecting a box in the OUI).
Has anyone already done this?
Thanks!

Please see "Oracle Applications Installation Guide: Using Rapid Install" manual -- http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121oaig.pdf
Also, please see old threads for similar discussion.
Multi Node Installation for EBS 12.1.1
Multi Node Installation for EBS 12.1.1
EBS 12.1.1 multinode installation
EBS 12.1.1 multinode installation
Thanks,
Hussein

To much disk IO when using virtual box in windows 2008sp2

We are using virtualbox for our linux guest servers on windows 2008 sp2 host.
when ever i start Installation(EBS/SAP), Virtual box is crashing with IO errors , then i can see high disk io consumption in server.
RAM: 32GB
HDD: 2TB(partitions C drive : 100 GB and D drive 946 GB and E drive 860 )
INTL-CORE I7-3820-3.6GZ
I've tried to use below fix but i am getting error message that this fix is not compatible. .
http://support.microsoft.com/kb/982383/en-us
i am really new to win-server admin,let me know what else log files i need to look to find the issue.

partition full formatted and allocated in vbox ? if set dynamic it will create bigger io in the end. If vbox fail because of io, then check to update
it.
I ran vbox off a atom processor with a built-in HDD controller, and yes it was working even if lagging to hell because of bad IO, but crashing is another story. (it was 2012 DC + Exchange and VBOX with a full OS on it... on a IDE 5200's hdd, to give
the stat)
Regards, Philippe
Don't forget to mark as answer or vote as
helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Oracle EBS 11.5.10.2 Installation Steps

Although this is by no means exhaustive or the most accurate, all contributions and/or corrections are welcome
As I attempt to reply the numerous calls and emails I have been getting, firstly sorry guys, I have been settling down at a new job, and haven’t had time to locate my implementation notes, however find below the steps I followed with a successful result.
Installing Oracle E-Business (EBS) Release 11i (version 11.5.10.2)
Linux Installation – SLES 9 Rel 1
•     Please follow these instructions – I could not have written a better set of instructions :
http://www.novell.com/coolsolutions/feature/16009.html
NOTE: Although this is written for SLES 9.1, I believe this will work for any Linux variant.
Also, make sure you have installed openmotif 2.0 or higher to make sure the forms server starts and remains running
Windows 2003 Server SP 1
Environment:
Windows 2003 Server was installed as an environment on VMWare Server (The free one).
Hardware Spec:
P4 800 Mhz CPU
2GB (Physical RAM) and 1GB (Virtual RAM)
250 GB (Physical HDD), 120GB (Virtual HDD)
DVD RW
DECLARE
At this point I have to say a few things:
1.     I have not attempted installing on any other version of Windows, so if you try with another version, I may not be able to answer your questions, although I believe it should not be any different.
2.     I would believe you can or have access to the internet and can download or find most of the resources needed.
3.     I would assume you have installed the Windows 2003 Server with SP 1, Internet Explorer and Outlook. Also, have included an IP address, a server name with its domain extensions in the host file.
4.     I would assume that you have created one group – dba , two users applmgr and oracle and included them in the dba and administrator groups
5.     I would assume that you are at least familiar with the terms and usage of abbreviations in this sort of environments.
6.     I would also assume you have reviewed and have made allowance to meet the required specification in terms of hardware (I did not attempt an installation on the USB HDD, so may not be able to help, if this applies to your situation)
BEGIN
     Prepare Environment
Download and have read the following software:
1.     Java Development Kit 1.3 (or higher version)
http://java.sun.com/downloads/index.html
2.     Active Perl – This is needed for the staging script adautostg.pl http://www.activestate.com/store/productdetail.aspx?prdGuid=81fbce82-6bd5-49bc-a915-08d58c2648ca
3.      Visual C++ - This is needed for many of the real-time code compilation
http://msdn.microsoft.com/vstudio/express/visualc/download/
4.      CYGWIN
http://www.cywin.com/setup.exe     (Free open source, never expires!)
OR
MKS Toolkit (Evaluation copy, 30 Trial or get a licence for about $500)
http://www.mkssoftware.com/eval/
This is necessary for certain unix-only available utilities required to implement/compile Oracle E-business Suite, such as which, make, cc, etc.
5.     The DVDs or downloaded zipped copy of the entire Oracle E-Business Suite software for Windows 32-Bit ( I did not attempt on a 64-Bit processor, though I believe it should not be different, but see the necessary documentation if that is your situation)
http://edelivery.oracle.com
6.     Jinitiator – This is required to run the forms on your system (Although a first attempt to view any of the form interfaces downloads and requests this be installed first) http://www.oracle.com/technology/software/htdocs/devlic.html?url=http://otn.oracle.com/software/products/developer/htdocs/jinit.htm
NOTE:
•     DO NOT Install into the default directories and do not allow spaces in file directories/path when installing the software, somehow experience has shown that the Oracle EBS does not handle spaces in file directories well, and results in untold hardship if ignored. E.g Default installation folder for an software installation may suggest C:\Program Files\ JDK 1.5, MAKE SURE you alter this to something like C:\JDK15. DO THIS FOR ALL SOFTWARE INSTALLED
•     After each software installation, please reboot the system before installing the next piece.
•     Make sure that all the paths to the bin folders for all software installed is included in the environment variables, and verify by typing path in the command prompt to display all paths listed
•     If using CYGWIN (like I did, as I could not afford a software expiring on me nor could afford $500 for a test). You may choose all the modules available, but you do not need all (it will be an overkill to have the entire unix utilities and libraries on your windows box, unless you plan on learning unix commands or into heavy development requiring a unix environment, without wanting a unix machine) MAKE SURE you choose all the library options, all the development options and that should be OK. Then confirm after the installation by typing which, cc (or gcc), make(gnumake), ls, gawk(awk), grep (egrep) (IMPORTANT:Where one of the other in brackets exists, copy and rename the copy as the alternative). As a double sure – copy all of these into C:\Bin directory.
•     If the Oracle EBS is downloaded, unzip all the files into the folder and ignore any suggestions that it will over-write other files such as the component.label files
Installation Proper
•     Run adautostg.pl – which you will find in the StartCD i.e the first file downloaded and unzipped. This will attempt to rearrange the installation files in the order in which the installation wizard – rapidwiz prefers and identifies the folders. (Saves you hand-holding the wizard by having to interact during the installation, pointing it to the relevant folders/files if not run) to create the staging area.
•     Run Rapidwiz – either by double clicking the rapidwiz.cmd in the startcd folder (this would be the one in the staging area) or from the command prompt
•     As required, point rapidwiz, to the bin folder of cygwin e.g C:\cygwin\bin (if this is as installed) in the place where it requires the MKS Toolkit
•     Pre-installation Checks – rapidwiz intelligently tests all the necessary software and requirements before installation starts. A corresponding message to each parameter suggests the opinion of the rapidwiz whilst a green tick indicates the parameter is sufficient, other indicators may need reviewing. Please make sure you resolve each issue before progressing with the installation. This may lead to a waste of time if not resolved.
•     Choose a single-node installation
(if just testing or practicing, you may also choose a multi-node if this is what you want.)
•     If all the modules are not needed (I installed all), you may have to choose which modules you require, and state where you want the modules installed.
•     Assuming all parameters are passed and installation begins, the different stages of the installation steps can be followed by the on-screen messages or log file reviews (each logfile directory will be displayed on the screen during the installation of each context).
•     Post Installation Checks – Rapidwiz does some checks after an installation, whether successful or not, and provides a report. When an installation is successful. It confirms and provides the url to login. The default username and password for the system administrator is usually sysadmin / sysadmin. You are encouraged to create another user immediately.
For all who asked, depending on how far up your hardware scales in terms of specifications, the installation may take about 3 hours (at least mine did) or more.
Login on to Oracle EBS !
The URL required for logging on to the OAM (Oracle Application Management - For the Apps DBAs) and OEBS (Oracle E-Business Suite - essentially for the Functional Implemeters/Consultants ) - The entire gamut (They are shown as hyperlinks), should be as follows;
http://hostname(servername.domainname.com):8000/
where hostname is the same as specified in your host file e.g servername.domainname.com or .whatever-u-like
and
8000 - is the default port, but you may have chosen your own port and that should be used in such a case.
N.B - The Forms server is often started when an attempt is made to access such an interface after login in to the OEBS. However, in my own case, it did not until I made sure openmotif 2.1 was installed on my SuSE Linux Enterprise Server 9.1. The windows installation started without any issues.
If all attempts fails….
You may have to try and try again by deleting all installation files and starting all the installation steps again. It will help if you know how to edit your registry settings to delete all reference to oracle e-business (not all reference to oracle though, as some odbc-related entries have been installed by Microsoft and require your registry settings to function)
Alternatively, send me your box, your mailing address and a token (money of course, and I may be able to set it all up for you) – JOKING!
CAVEAT: I will not be held responsible if anything unsavoury happens to your system in the course of you following the steps I have highlighted above either correctly or incorrectly. However, if you are successful, please sing my praises all over the forum and ask that I be rewarded by Oracle!
Olu

Hi
If anyone need the document to "How to install Oracle Applications 11i on Windows 2003" i can forward the document with screen shots with detailed steps.
Reg
Dwaraka

What are the common error while EBS installation in Unix /windows

what are the common error while EBS R12 installation with os unix and windows.
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
regards

Hi user;
what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
RW-5004- RW-50010 etc.
For error we have to check instalaltion log files for can get more details about it
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
For more details Please check:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Hope it helps
Regard
Helios

Issue in Installation of EBS R12 through VNCserver thrgh Putty

Hi Guys,
I know this may sound quite childish but still i wanna know If we are Installing EBS R12/11i by connecting the Linux box through putty OR by connecting through VNC server .
If we r connecting through putty do we 've to set the Display in this case.
Or if If we r connecting through VNC Server do we 've to set the Display variable.
My query is what is the Differences between using VNC server & putty in Installation of EBS r12/11i.
Today my Boss pointed out that i should install vnc server on windows for installing EBS rather than using putty as it required setting of Display variable.
which i couldn't quite understand. Hence the query !!
Really Appreciate if u could explain it a little bit more.
Thanks & Regards
MZ.

I know this may sound quite childish but still i wanna know If we are Installing EBS R12/11i by connecting the Linux box through putty OR by connecting through VNC server .
If we r connecting through putty do we 've to set the Display in this case.
Or if If we r connecting through VNC Server do we 've to set the Display variable. You cannot set DISPLAY when using putty so you will have to use VNC.
My query is what is the Differences between using VNC server & putty in Installation of EBS r12/11i.
Today my Boss pointed out that i should install vnc server on windows for installing EBS rather than using putty as it required setting of Display variable.
which i couldn't quite understand. Hence the query !!
Really Appreciate if u could explain it a little bit more.To run Rapid Install you need to have the DISPLAY set properly to see RapidWiz, and this would work with VNC (not with putty). If you can set the DISPLAY is putty (issue xclock to verify) then you can use it (which I believe is not possible).
Thanks,
Hussein

Oracle ebs installation on windows 2008 R2

Hi Hussein,
I am doing oracle EBS installation on windows 2008. As per installation doc below are the pre-requisite
The Prerequisites Software are:
1.Chose and Operating System windows 2008 (32 bit):
Select the Windows Operating system and install it. After installed OS successfully need to change DNS entries or Active Directories as per your environment.
2.Install the Microsoft Visual C++ 2008 software.
See the post for installation of – Microsoft Visual C++ 2008
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Regards,
Raj

hi Raj
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Yes go for cygwin
please see
Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows[Article ID 414992.1]
Oracle E-Business Suite R12 Installation Steps on Windows XP
;) AppsMAstI :)
Sharing is Caring

Oracle EBS R12 installation problem in Windows 2003

Hi,
I am trying to install Oracle EBS R12 on Windows 2003 R2. I have installed cygwin along with required packages and also Visual studio 2005 as specified in the prerequisites of installation document.
All the validations are successful before installation but I am facing error during installation in Step3 at about 53 percent. When i checked the log file, I found that some of the files required for installation are not found in my staging area. Now I want to run MD5sum on the Staged Files.
I had downloaded md5sum_windows.txt and also run this command :
md5sum --check md5sum_Windows.txt > md5sum_result.txt
In md5sum_result.txt, I am getting error for all files. Error message is as :
oraAppDB\Disk1\data\driver\Disk1.drv
: FAILED open or read
This is repeating for all files. But i can see that the files are present in My Staging area. Do i need to set some permission for this. Please help. Desperately want to install EBS as part of perparation for my planned certification.
Edited by: 855292 on Nov 26, 2011 1:58 AM
A simple detailed Step by Step Installation Document or any good reference for the same would by really appreciated.
Edited by: 855292 on Nov 26, 2011 2:00 AM

I have downloaded all the 33 files in oracle edelivery site. I have seen a post of yours regarding Oracle R12 installation on Windows XP. It mentions only some 25 files. Please do not rely on the that thread as it was for 12.0.x installation.
For R12 (12.1.1) you need to download the following files:
From: Oracle E-Business Suite Release 12.1.1 Rapid Install Start Here (Part 1 of 4)
To: Oracle E-Business Suite Release 12.1.1 for Microsoft Windows (32-bit) Rapid Install APPL_TOP - Disk 2 (Part 2 of 2)
Is it possible that contents of the zip file are lost during download because my stage area is about 39 GB . and also I have verfied all the files in edelivery site is downloaded too.
Also the error i mentioned in my last post, I can see the file in the directory but still its showing read error. Is it due to corruption of data. That would mean that I will have to download all 40 GB again :-(It is easy to verify the contents of the stage area directory without running md5sum, so please do so and post the results here.
Thanks,
Hussein

EBS 12.1.3 unable to restart after a successful installation

Hi all,
I've installed the EBS 12.1.3 template following the instructions in this guide: http://www.pythian.com/blog/build-ebs-sandbox-1hr. By the way, it's a charm not using VM Server/Manger... ;)
Directly after the installation, I'm able to access to EBS; the login page is available and I can logon into the app.
The problem is, after a reboot of the APPS template, I'm unable to log again.
At the startup, at the step Starting ebizapps, I have the following error:
/u01/E-BIZ/apps/apps_st/appl/APPSbydb_atgtxk02.env: line 31: /u01/E-BIZ/inst/apps/mydb_atgtxk02/ora/10.1.2/mydb/atgtxk02.env: No such file or directory
It is true I do not have /u01/E-BIZ/inst/apps/mydb_atgtxk02/ora/10.1.2/mydb as a directory. Into /u01/E-BIZ/inst/apps/mydb_atgtxk02, I only have admin directory.
I can't explain how after a successful login, a reboot of the EBIZ app template messes up the all thing.
Thanks,
Jay.

Jay
Edit /u01/startapps.sh and stopapps.sh
Add VIS to the environment lines " . /u01/E-BIZ/apps/apps_st/appl/APPS*.env"
Change to => ". /u01/E-BIZ/apps/apps_st/appl/APPSVIS*.env"
I had the same problem found the solution here...refer to the Fix Environment File section of the following
http://ltd.kentw.co.uk/technical/r12-installation/create-apps-vm/
A little late, I hope it helps someone in the future..
Ben

Oracle EBS R12 for Windows Installation Error

Hi,
I tried to install Oracle EBS R12 for Windows. My installation had failed. Listed below is the log information. On the Second log file (further down below) it is saying "TNS:no listener". Please help.
FIRST LOG FILE:Log Path: C:\Orale\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\06132024
C:\Users\Bing\AppData\Local\Temp>if 0 == 0 goto :TCFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "runProcess_4"
"runProcess_4"
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>REM Perform the instance configuration
C:\Users\Bing\AppData\Local\Temp>REM
C:\Users\Bing\AppData\Local\Temp>echo "Statusstring Configuring Database Technology Stack"
"Statusstring Configuring Database Technology Stack"
C:\Users\Bing\AppData\Local\Temp>(echo APPS & echo APPS ) | J:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDBTechStack -e C:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_bing-pc.xml -stage J:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
C:\Users\Bing\AppData\Local\Temp>if 1 == 0 goto :ICFG_OK
C:\Users\Bing\AppData\Local\Temp>echo "Cannot execute configure of database ORACLE_HOME using RapidClone\n";
"Cannot execute configure of database ORACLE_HOME using RapidClone\n";
C:\Users\Bing\AppData\Local\Temp>if "" == "TRUE" goto :ICFG_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
SECOND LOG FILEC::\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\ApplyDBTechStack_06132042.log
LOCAL : VIS
ORACLE_SID :
PATH : C:\Oracle\VIS\db\tech_st\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;C:\oracle\VIS\db\tech_st\11.1.0\appsutil\jre\bin;J:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\oracle\VIS\db\tech_st\11.1.0\bin;C:\Program Files (x86)\Oracle\jre\1.3.1\bin;C:\Perl\bin\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\hp\bin\Python
LD_LIBRARY_PATH : C:\oracle\VIS\db\tech_st\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:12
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=bing-pc.horse.com)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 13-JUN-2009 20:43:14
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
addlnctl.cmd exiting with status 1
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 5 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit_inst.cmd
script returned:
Sat 06/13/2009
08:43 PM
"afmkinit_inst.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Setup Phase
Running Setup Process 6 of 6 for AppsUtil
Executing script in InstantiateFile:
C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc\afmkinit.cmd
script returned:
Sat 06/13/2009
08:43 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_bing-pc\adcvmlog.xml.06132042
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_bing-pc
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Thanks in advanced,
Edited by: amorsolo on Jun 15, 2009 9:12 PM

Hi user3726038,
I have seen posting about the installation of EBS R12/i11 saying it does not work with Windows Vista (64 bit). I went ahead and tried it anyway to see what kind of errors I get and to confirm if the errors I get are consistent with other people using Windows Vista. FYI, my installation went as far as 99% complete of step 2 of 5 before it errored out. I checked and noticed that many components of EBS have been installed with status equal zero which is good.
When I got the "TNS-12541: TNS: no listener", I went to Windows services, located the Oracle TNS service that was created by the EBS installation and tried to start it. Then I got this error: "error 1053 the service did not respond to the start or control request in a timely fashion". I googled the error message and the resolution is: "To resolve this problem, obtain the latest service pack for the Microsoft .NET Framework 1.1.". I have tried this but it does not work because my Windows Vista uses a higher version of .Net Framework 1.1. I have done more research but to no avail. However, it is fun as I learn many things about the EBS intallation and Windows Vista.
By the way, these are the steps when I run the rapidwiz on Windows Vista. Click on Start => Click on command prompt => right click on command Prompt => select run as administrator => CD to the path where the rapidwiz reside. Somehow if I use the regular command prompt the installation will die on step 1 of 5 even when I log in as administrator.
In your case you are using Windows 2k3. Make sure your OS is not 64 bit. Whenever you get an error and it does not say much, google it to see the resolution and make sure you read the Installation Guide. Hope this helps.

Error Code RW:- 50004 During EBS Installation

Hi Friends ,
While I am Installing Oracle EBS ,it is done upto 20% and Throws an Error RW:50004 :Error Code Received when running external process.
...Please help how to resolve this issue??

Hi,
While I am Installing Oracle EBS ,it is done upto 20% and Throws an Error RW:50004 :Error Code Received when running external process.
...Please help how to resolve this issue??This error is a generic error, so please check the installation log file for details about the error.
Please mention the application release along with the database version and the OS.
Thanks,
Hussein

EBS fresh installation

Hello Experts,
I've to install fresh EBS R12 instance on 64-bit machine with Linux OS, I've some questions about that, if any kindly can provide answers:
1. I've 16GB RAM, is it necessary to configure 32GB swap area for it?
2. The document (Doc ID 761566.1) states:
"net.ipv4.ip_local_port_range: values recommended for the local port range may need to be adjusted according to the specific needs of the user's environment in order to avoid port conflicts."
Why do we set this parameter and does it affect Network or conflicts with any other server?
3. The document states:
"kernel.shmall: The listed value is the minimum requirement - we recommend an actual setting that is at least equal to the sum of all the SGAs on the system, divided by the page size."
I'm going to install a fresh instance, how do I configure this setting?
4. What is "Oracle Business Accelerator for EBS"? does it require different settings/steps than a normal EBS installation?
Please help.
Thanks & regards
Aneel Ahmed

1. I've 16GB RAM, is it necessary to configure 32GB swap area for it?
Oracle Database (RDBMS) on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) (Doc ID 169706.1)
Oracle Database Search Results: swap
2. The document (Doc ID 761566.1) states:
"net.ipv4.ip_local_port_range: values recommended for the local port range may need to be adjusted according to the specific needs of the user's environment in order to avoid port conflicts."
Why do we set this parameter and does it affect Network or conflicts with any other server?
http://docs.oracle.com/cd/E11882_01/install.112/e47689/pre_install.htm#BABBJFAI
3. The document states:
"kernel.shmall: The listed value is the minimum requirement - we recommend an actual setting that is at least equal to the sum of all the SGAs on the system, divided by the page size."
I'm going to install a fresh instance, how do I configure this setting?
Just use the same values mentioned in the doc.
4. What is "Oracle Business Accelerator for EBS"? does it require different settings/steps than a normal EBS installation?
Accelerators | Oracle Consulting
Thanks,
Hussein

EBS R12 RAC Clusterware Installation.

Hi hussein/helios
The Oracle support has installed a RAC on our EBS Prod server but it was a POC(proof of concept) only. So the name was TEST RAC instance.
Now, we want to install the final config setup named PROD following the docs he made on the TEST POC. We will also
reuse all the files, directories, and raw devices used in TEST as PROD. Meaning all the traces of files and home dirs of TEST will be renamed to PROD, and change ownerships from oratest to oraprod.
First, we run deinstall of all the TEST install software like the CRS, ASM. We also delete the traces of TEST on inittab and oraInventory.
Then we now installed first the CRS_PROD. But to our surprise the CRS installation failed , it seems that it still
can see the "test" setup :(
Failure at SlfAccess(/u02/oracle/oratest/product/11.1.0/crs) with code -1Note the we already deleted the above directory since it belongs to the old setup, while the existing is:
/u02/oracle/oratprod/product/11.1.0/crs
My question is, how do you completely cleanup or deinstall all the previous traces of CRS?
Thanks a lot,
Ms K

Hi;
Please check below link which could be helps you
http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle10gRAC/CLUSTER_65.shtml
http://www.appsdba.com/blog/?p=155
http://appsfusion.blogspot.com/2007/11/steps-to-create-ocr-and-voting-disk-on.html
How to Restore CRS after accidentally run localconfig on RAC system [ID 747415.1
As i said before its better to move your thread OCR forum site
Regard
Helios

EBS 12.1.1 multinode installation

thanx for your quick response and i want to give you more explanation about my environment :
4 apps node win 2003 sp2 32bit
2 db node as RAC 64bit win 2003
so what's the guidelines to install EBS 12.1.1 on 4 apps node and 2 db nodes as a RAC
Regards

Hi,
You need to follow the same procedure except that you need to convert the database from single instance to RAC (since Rapid Install does not install a RAC database).
For converting the database to RAC, please refer to (Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]).
Note: Please update the same thread instead of creating new one if your other questions are relevant to the main topic -- Multi Node Installation for EBS 12.1.1
Thanks,
Hussein

Installation EBS 12.1.1

Similar Messages

Maybe you are looking for