Installation EHP 3 (ECC 6.0)
Hello,
We are actually trying to import all packages for the upgrade to EHP3 (603). The import is at the step DD Activation, which takes very long. The problem is, over night, the connection to the server breaks, and the import fails..
Is there a profile parameter, or something to prevent this case?
Regards,
Rainer
> If its not a good idea to install SAPGUI on the server, how do you make the updates/upgrades with SPAM/SAINT (and if they take long time, ~ 20-30 hours) ..?
Use a local PC and keep it running over night?
You could connect via Windows Remote desktop (on Windows XP) to the PC to administer it and check the state. We use a Windows Terminal Server to run long running installations/updates. I connect to it in the office, I disconnect when I go home, and from there I can "dial in" (using VPN) and re-connect to the same terminal. If the connection breaks, I can simply reconnect to the Terminal.
BTW: using just a saprouter connection from the outside to the inside system will send the password in clear text over the internet... Better use a VPN to connect to systems from outside.
Markus
Similar Messages
-
SRM "one-client" installation on ECC 6.0 EhP: Own client needed for SRM?
Hello experts,
i've a question concerning the SRM "one-client" installation on ECC 6.0 EhP4 as Add-On.
Is it possible to use SRM and ERP funtionality in a single client e.g. 001?
Or do we have to use different clients on the system like for SUS?
I haven't found any information regarding this topic in SAP ressources. I'm currently using CG "SAP SRM on One Client in
SAP ERP" Release date 2008 (found on marketplace/srm-inst --> srm7.0); SRM - Technical Basis Configuration (BuildingBlock S00/S03). I'm facing problems while going through the following customizing steps:
Assign logical System to Client [both logicall systems are on the same client (001)] ==> error while trying to reference the second logical sys. because client (001) cannot be used again (own presumption: error message differs)
I've seen that some of you have successfully installed and customized this szenario. If someone could provide me any helpful information or guideline how to proceed in general... would be great...
Best regards,
PATRICKThanks for your reply. I've checked the offline documentation because i've no access to solman.
There is a document which describes the steps for configuring one-client customizing on marketplace.
Link: [SAP SRM 7.0: SAP SRM on One Client with SAP ERP|https://websmp203.sap-ag.de/~sapidb/011000358700001201562009E]
The problem is that its impossible to cofigure the system like it's described in the document.
Let me explain why...
SRM Addon is installed and customizing is done in client 001 (same client as erp)
overview about defined logical systems:
-ONECLNTERP (for ERP is defined)
-ONECLNTEBP (for SRM is defined)
When I try to assign the logical system to client 001 it works for the first entry
for the second log. system it shows up an error message.
-->I assume because client 001 has been already assigned. I cant use client 001 again.
But One-Client szenario schould be possible in a single client or is SAPs One-Client more like One-System with differnet clients for SRM and ERP on the same machine?
Because of the above mentioned problem I assume that it's impossible to run ERP and SRM in the same Client number.
Am I right? Do I have to use two Clients on One System for proper Customizing?
Or if it's possible to use a single client on one machine for both ERP and SRM how is it possible to assign two log. systems to one client number?
I'm totally confused. Any help would be appreciated - any tips/hints/experiences from someone who has customized One-Client?
BR, Patrick -
Error in installation of ECC 6 Import ABAP
I have got error during installation of ECC 6 on win 2003 and oracle.
"Not all objects are succefully processed. DIAGNOSIS: For detail see output file with invalid objects invalid_objects.txt and log file object_checker.log SOLUTION: Normally it indicates the data load error but in some special case (for example if some objects were created or loaded externally) you can press OK to continue.
Here is invalid_objects.txt
checkObjects=
dbType=ORA
strDirs=E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_1\EXP1\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_2\EXP2\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_3\EXP3\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_4\EXP4\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_5\EXP5\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP6\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP7\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP8\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP9\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP10\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP11\DATA
trace=all
tskDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS
package object type action status
SAPDFACT ?N pkey create
and object_checker.log
INFO: 2020-12-31 10:12:55
Object Checker is started.
CONFIG: 2020-12-31 10:12:55
Application options:
checkObjects=
dbType=ORA
strDirs=E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_1\EXP1\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_2\EXP2\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_3\EXP3\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_4\EXP4\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_5\EXP5\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP6\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP7\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP8\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP9\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP10\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP11\DATA
trace=all
tskDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS
CONFIG: 2020-12-31 10:12:55
List of packages with table structure: 'SAP0000'.
INFO: 2020-12-31 10:12:55
19 packages found in 'E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_1\EXP1\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_2\EXP2\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_3\EXP3\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_4\EXP4\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_5\EXP5\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP6\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP7\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP8\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP9\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP10\DATA;E:\51032413_IDES SAP ERP 2005 SR2 Inst. Export 1 of 35\51032413_6\EXP11\DATA' directories.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'MAPR~ADQ' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (!MSS) index 'MLST~1' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'MLST~1AD' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (!MSS) index 'MLST~2' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'MLST~2AD' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (!MSS) index 'MLST~4' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'MLST~4AD' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:56 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'PLMK~ADQ' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOYES~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOYES_APP~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOYES_RB~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOYES_TI~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOY_CSH~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'SEMPLOY_SEARCH~ARE' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:57 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (MSS) index 'STXH~TDN' found in STR file for 'SAPAPPL0' package.
TRACE: 2020-12-31 10:12:58 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'BBSID~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:58 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'BSID~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:58 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (DB6) index 'DB6CSTRACE~1' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'KBED~3' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'KBED~4' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'NAST~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S003~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S003BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S003BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S004~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S004BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S004BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S006~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S006BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S006BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S011~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S011BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S011BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S012~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S012BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S012BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S013~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S013BIW1~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S013BIW2~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S031~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:12:59 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (ADA) index 'S032~ADQ' found in STR file for 'SAPAPPL1' package.
TRACE: 2020-12-31 10:13:02 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Database specific (DB6) index 'VARIS~DB6' found in STR file for 'SAPAPPL2' package.
TRACE: 2020-12-31 10:13:04 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Data load must be skipped for table 'DBPROPERTIES' from STR file for 'SAPSDIC' package.
TRACE: 2020-12-31 10:13:04 com.sap.inst.migcheck.object.ObjectCheckTask collectPackageObjects
Data load must be skipped for table 'DDLOG' from STR file for 'SAPSPROT' package.
ERROR: 2020-12-31 10:13:05
1 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
INFO: 2020-12-31 10:13:05
Object Checker is stopped.
I have not installed any object manually. Also not sure which object did not installed properly? Any idea or suggestion for this?
Thanks
Edited by: Prinesh Patel on Jan 7, 2008 7:35 PMHi Patel,
Thanks for your update.
Regards,
Hari. -
Installation of ECC 6.0 on Windows Vista
HI,
I am not able to install ECC 6.0 on windows vista OS even I tried to install windows server 2003 but it shown incomitablity error becuse of newer version of OS(windows Vista).Could you let me know how can i remove the vista and get win server 2003 installed at my system.If I run the set up file of windows server 2003 it gives error "setup cannot run in program compatibility mode".Please let me know what else i can do.
Thanks & Kind Regards
Sanjay RaiHi Sanjay,
Few things you have to check before installation of ECC 6.0 on any OS :-
1. From where have you got the dump for ECC 6.0? Have you downloaded it from Service Marketplace. If Yes then you have to check whether your OS is also of the same configuration as the dump you are using like if you are using 32-bit then your OS also needs to be 32-bit only. As far as ECC 6.0 SR3 is concerned it can be installed on 64-bit machine only. For 32-bit machine you have to go for SR2.
2. Also the supported JDK for the ERP 6.0 is JDK 1.4.2_17 as per SAP Note 716604. Please uninstall the current JDK and install the required one. The 64 bit JDK as per the SAP Note 941595 is available on the new IDES server.
3.Although there is cheat code to install the SAP ERP6.0 in 32 bit mode as well. But in that case NO Java system will be installed. I will advise for 64 bit method with Java system. Only use 32 bit mode if 64 bit is not possible. Follow SAP Note 1244548.
4. The DB Size system will need around 190 -200 GB to install.
Thanks,
NItesh Jain -
Installation Of ECC error in step create temp licence:
We are in process of installation of ECC 6.0 on our server with OS: RHEL5 and DB:MaxDB
We are getting an error in step Create Temp Licence. The error reads as follow.
INFO 2008-02-21 04:56:12
Execute step createTempLicense of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ADA|ind|ind|ind|ind|1|0.
INFO 2008-02-21 04:56:12
Working directory changed to /tmp/sapinst_exe.8005.1203531194.
ERROR 2008-02-21 04:56:12
FRY-00001 Cannot load library iamodapp.so: iamodapp.so: cannot open shared object file: No such file or directory.
INFO 2008-02-21 04:56:12
Working directory changed to /sapinstd11n.
ERROR 2008-02-21 04:56:12
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-02-21 04:56:12
FCO-00011 The step createTempLicense with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ADA|ind|ind|ind|ind|1|0|createTempLicense was executed with status ERROR .
Please suggest.Hi,
the installation process aborts in "Create sap license" with error message "library iamodora missing", some libraries needed are missing to work around this, either after it aborts or event before staritng the installation unpack the libraries into the installation directory using:
SAPCAR -xvf /<sapinst-CD>/SAPINST/UNIX/LINUX_32/SAPPROD.SAR
1. Copy the installation media dvd to a directory on a files system
2. change directories into the sub-directory which contains the executable (sapinst)
3. run the command sapinst -extract
4. It will unpack the missing libraries into the same directory where you executed the command..
5. copied these libraries to lib folder
6. Stop and restart the installation
regards,
kaushal -
Installation of ECC 6.0 EHP 6 IDES
Hi Experts,
I want to install ECC EHP 6 on Windows Server 2012 with MSSQL SERVER.
I tried 4 times but didn't get success everytime, system Fails at Import ABAP steps.
I am trying with BD IDES of EHP6.
If possible please explain me the steps from scratch as again I am going to install Fresh on my Machine.
-Regards
RohitHi Rohit
You should clean the system and again start the installation from scratch.
1. Your machine name CAN NOT be more than 13 characters. Otherwise you’ll get an error during installation.
2.increase your virtual memeory.
3.install JDK CORRECT one.
SAP IDES ERP 6.0 EHP4 / NetWeaver 7.01 Installation Guide on Windows 2003 64-bit – Part 2 &laquo; Zieglers -
IDES Installation - EHP 7 for SAP ERP 6.0, fails at abap import win 2012 r2 ORA
Dear gurus:
I am having an issue on import abap phase to complete the SAP IDES ERP EHP 7 for ABAP installation.
i am already search on the net, but found nothing about this>
my host file on both path:
C:\Windows\System32\drivers\etc
C:\Windows\SysWOW64\drivers\etc
#127.0.0.1
rzablah01
127.0.0.1
rzablah01.rzablah
#127.0.0.1
rzablah01
localhost
i don't have domain controller
machine:
windows 2012 server datacenter r2 english x64
8gb ram
700gb hdd
the SWPM is
SWPM10SP06_5-20009707.sar
the pre check was OK
I put the policy files on java in the following paths
C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\sapjvm\sapjvm_6\jre\lib\security
C:\usr\sap\ERP\SYS\exe\jvm\NTAMD64\sapjvm_6.1.059\sapjvm_6\jre\lib\security
the version is jce_policy-6.zip
I already patch kernel, and try another things, but nothing solve it.
my log:
C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\sapinst_dev.log
i found this on the file:
WARNING 2014-09-24 21:10:39.657 [synxcpath.cpp:1010]
CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Unable to get information about path \\LABEL.ASC\ using GetVolumeInformation. Operating system error message: The specified path is invalid.
sapinst_dev.log________________________________:
TRACE 2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2014-09-24 21:10:33.238
Using custom value flow_trace for property SAPINST_MESSAGE_DEVLOG_THRESHOLD.
TRACE 2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_GUILOG_THRESHOLD.
TRACE 2014-09-24 21:09:42.872 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\\sylib722.dll
TRACE 2014-09-24 21:09:42.873
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:09:43.017
MessageLib initialized successfully.
INFO 2014-09-24 21:09:43.20 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_09_43.
INFO 2014-09-24 21:09:43.21 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_09_43.
TRACE 2014-09-24 21:09:43.22 [syxxclogbook.cpp:219]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel
TRACE 2014-09-24 21:09:43.23 [csicomponentsetmanager.cpp:112]
CSiComponentSetManager::readFrameworkJslib()
Reading framework jslib.
TRACE 2014-09-24 21:09:43.595 [csicomponentsetmanager.cpp:146]
CSiComponentSetManager::readFrameworkJslib()
Reading framework jslib done.
TRACE 2014-09-24 21:09:43.597 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaguieng722.dll
TRACE 2014-09-24 21:09:43.598 [syxxclogbook.cpp:219]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file dev_sap_kernel
TRACE 2014-09-24 21:09:48.153 [synxcuser.cpp:2083]
CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
existence check for user Administrator returned true.
TRACE 2014-09-24 21:09:48.153 [syxxccache.cpp:419]
CSyAccountCache::addToCache(const IaPtr<CSyAccountImpl> account)
lib=syslib module=syslib
inserted account (Administrator, S-1-5-21-3086296020-3121675482-1484945983-500, USER) into the accountcache.
TRACE 2014-09-24 21:09:48.153 [cguiproxy.cpp:74]
CGuiProxy::doLog()
Waiting for client connection (1)
TRACE 2014-09-24 21:09:48.154 [synxccuren.cpp:901]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre')
lib=syslib module=syslib
Environment variable SAPINST_JRE_HOME set to value 'C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre'.
TRACE 2014-09-24 21:10:12.858 [cguiproxy.cpp:74]
CGuiProxy::doLog()
Start client logon ...
TRACE 2014-09-24 21:10:12.858 [cguiproxy.cpp:398]
CGuiProxy::checkIfLogon
Connection request to guiengine backend by host child process at (736:740)
TRACE 2014-09-24 21:10:12.859 [cguiproxy.cpp:455]
CGuiProxy::checkIfLogon
GUI Protocol version is 3.1
TRACE 2014-09-24 21:10:12.859 [cguiproxy.cpp:456]
CGuiProxy::checkIfLogon
Send connect information
TRACE 2014-09-24 21:10:12.859 [cguilogon.cpp:246]
CGuiLogon::testForAutoLogon()
client connected from child process at (736:740)
TRACE 2014-09-24 21:10:13.46 [cguiproxy.cpp:74]
CGuiProxy::doLog()
Client successfully logged on from child process at (736:740)
INFO 2014-09-24 21:10:13.177 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_10_13.
INFO 2014-09-24 21:10:13.178 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel_test_24_Sep_2014_21_10_13.
TRACE 2014-09-24 21:10:13.179 [csimanagerinterfaces.cpp:3798]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE 2014-09-24 21:10:13.349 [csimanagerinterfaces.cpp:3800]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE 2014-09-24 21:10:13.361 [csimanagerinterfaces.cpp:3798]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE 2014-09-24 21:10:13.535 [csimanagerinterfaces.cpp:3800]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE 2014-09-24 21:10:13.535
exe dir is C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362
INFO 2014-09-24 21:10:13.538 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2014-09-24 21:10:13.539 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE 2014-09-24 21:10:13.543 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iakdblib722.dll
TRACE 2014-09-24 21:10:13.543 [sixxcreate.cpp:46]
startInstallationViaStarter()
SAPinst build information:
Version: 2014.09.0
Build: 1521363
Compile time: Sep 15 2014 - 16:33:56
Make type: optU
Codeline: 720-2_REL
Platform: NTAMD64
Kernel build: 721, patch 319, changelist 1516453
Exe directory: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:10:13.547 [csimanagerinterfaces.cpp:3798]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loading G:/SOFT/COM/INST/messages.xml ...
TRACE 2014-09-24 21:10:13.728 [csimanagerinterfaces.cpp:3800]
CSiManagerInterfaces::tryToLoadMessageDictionary
Loaded G:/SOFT/COM/INST/messages.xml
TRACE 2014-09-24 21:10:14.109 [cproductchoicedialog.cpp:79]
CProductChoiceDialog::popUp
Reading product catalog...
TRACE 2014-09-24 21:10:15.410 [cproductchoicedialog.cpp:84]
CProductChoiceDialog::popUp
Reading product catalog done.
TRACE 2014-09-24 21:10:15.562 [cstartupfilereader.cpp:482]
CStartupFileReader::filterCatalogByConstraints()
Displaying unfiltered product catalog
TRACE 2014-09-24 21:10:15.969 [iaxxgenimp.cpp:411]
CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2014-09-24 21:10:15.999 [iaxxgenimp.cpp:431]
CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation</title>
<dialog/>
TRACE 2014-09-24 21:10:16.262 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2014-09-24 21:10:29.73 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2014-09-24 21:10:29.73 [iaxxcdialogdoc.cpp:190]
CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2014-09-24 21:10:29.157 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\x.
INFO 2014-09-24 21:10:29.158 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\x.
TRACE 2014-09-24 21:10:29.792 [cservicehelpers.cpp:318]
CServiceHelpers::assertCorrectFileProtection(C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP)
Permission check skipped when running on windows.
TRACE 2014-09-24 21:10:29.793 [iaxxgenimp.cpp:411]
CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2014-09-24 21:10:29.793 [iaxxgenimp.cpp:431]
CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2014-09-24 21:10:29.793 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2014-09-24 21:10:32.063
current working directory is C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO 2014-09-24 21:10:32.69 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2014-09-24 21:10:32.70 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE 2014-09-24 21:10:32.73 [syxxcfile.cpp:125]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dev_sap_kernel, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
TRACE 2014-09-24 21:10:32.73 [synxcfile.cpp:478]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file C:/Users/Administrator/AppData/Local/Temp/sapinst_exe.2796.1411607362/dev_sap_kernel to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO 2014-09-24 21:10:32.74 [synxcfile.cpp:678]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'C:/Users/Administrator/AppData/Local/Temp/sapinst_exe.2796.1411607362/dev_sap_kernel' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP'.
INFO 2014-09-24 21:10:32.75 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\Administrator\AppData\Local\Temp\sapinst_exe.2796.1411607362\dev_sap_kernel.
TRACE 2014-09-24 21:10:32.75 [syxxcfile.cpp:125]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dev_sap_kernel, m_realNodeType: 2}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target file exists and (mode & ISyNode::EXISTING) ==> I will copy/move.
TRACE 2014-09-24 21:10:32.76 [synxcfile.cpp:478]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file G:/SOFT/COM/INST/dev_sap_kernel to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
INFO 2014-09-24 21:10:32.76 [synxcfile.cpp:678]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'G:/SOFT/COM/INST/dev_sap_kernel' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP'.
INFO 2014-09-24 21:10:32.116 [synxcfile.cpp:376]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file G:\SOFT\COM\INST\dev_sap_kernel.
TRACE 2014-09-24 21:10:32.117 [syxxclogbook.cpp:219]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\dev_sap_kernel
TRACE 2014-09-24 21:10:32.118
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:10:32.118
exe dir is C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:10:33.039
Running with toplevel file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/toplevel.xml
TRACE 2014-09-24 21:10:33.050
Component version information: lmts_007_REL (CL 136598)
TRACE 2014-09-24 21:10:33.71 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-24 21:10:33.71 [syxxcnode.cpp:425]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.log to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst_dev.34.log
TRACE 2014-09-24 21:10:33.88 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-24 21:10:33.88 [syxxcnode.cpp:425]
CSyNodeImpl::move(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log, ISyNode::CopyMoveMode_t 0x3)
lib=syslib module=syslib
Moved C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.log to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/sapinst.34.log
TRACE 2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2014-09-24 21:10:33.238
Using custom value flow_trace for property SAPINST_MESSAGE_DEVLOG_THRESHOLD.
TRACE 2014-09-24 21:10:33.238
Using custom value info for property SAPINST_MESSAGE_GUILOG_THRESHOLD.
TRACE 2014-09-24 21:10:33.247
Running with keydb file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml
TRACE 2014-09-24 21:10:33.247
Running with dialog file C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/dialog.xml
TRACE 2014-09-24 21:10:33.370 [iaxxgenimp.cpp:694]
CGuiEngineImp::parseDialogXml()
Removing 'copyLocation' node from diCdServerMissingPackage
Removing 'copyLocation' node from diCdServerMissingPackageWithCdName
Removing 'copyLocation' node from diCdServerWithCdName
TRACE 2014-09-24 21:10:33.392 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-24 21:10:33.393 [synxcfile.cpp:478]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml
INFO 2014-09-24 21:10:33.396 [synxcfile.cpp:678]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/keydb.35.xml'.
TRACE 2014-09-24 21:10:33.867 [syxxcfile.cpp:85]
CSyFileImpl::decideIfMoveCopyNode(const CopyMoveDestinationInfo & {m_nodeTypeForCombiCheck: ..., m_path: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, m_realNodeType: 8}, ISyNode::CopyMoveMode_t 0x3, PSyNodeInt &) const
lib=syslib module=syslib
Target node does not exist and (mode & ISyNode::MISSING) ==> I will copy/move.
TRACE 2014-09-24 21:10:33.867 [synxcfile.cpp:478]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copying file C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.xml to C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml
INFO 2014-09-24 21:10:33.876 [synxcfile.cpp:678]
CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
lib=syslib module=syslib
Copied file 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP/statistic.34.xml'.
TRACE 2014-09-24 21:10:35.715 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2014-09-24 21:10:35.824 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\statistic.xml
TRACE 2014-09-24 21:10:35.911 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2014-09-24 21:10:37.967 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2014-09-24 21:10:38.82 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP\statistic.xml
TRACE 2014-09-24 21:10:38.173 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2014-09-24 21:10:39.560
Setting product specific properties:
SAPINST_USE_FWK_JSLIB=true
TRACE 2014-09-24 21:10:39.561
Using framework jslib.
TRACE 2014-09-24 21:10:39.572
SAPinst was started using commandline: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\sapinst.exe
TRACE 2014-09-24 21:10:39.572
SAPinst properties are :
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
COMPUTERNAME=RZABLAH01
ComSpec=C:\Windows\system32\cmd.exe
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
FP_NO_HOST_CHECK=NO
GUISERVER_DIALOG_PORT=
GUISERVER_HTTP_PORT=
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
JAVA_HOME=C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)
JCE_POLICY_ZIP=
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\RZABLAH01
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PLMVIS_82_LIBPATH=C:\Program Files (x86)\SAP\FrontEnd\SAPgui\Program
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3a09
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
Path=C:\oracle\ECC\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)\bin
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
SAPINST_AUTHENTICATION_UNLIMITED=0
SAPINST_CHECK_PACKAGES=false
SAPINST_CODE_GENERATION_USE_RECURSIONS=0
SAPINST_CONTINUE_AFTER_ERROR=
SAPINST_CONTROL_URL=control.xml
SAPINST_CWD=
SAPINST_DETAIL_SUMMARY=true
SAPINST_DIALOG_PIPES=
SAPINST_DIALOG_PORT=21212
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_EXECUTE_PRODUCT_ID=
SAPINST_EXEDIR_CD=G:/SOFT/COM/INST
SAPINST_EXE_DIR=C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
SAPINST_GENERATE_INIFILE=0
SAPINST_GENERATE_INIFILE_CONFIG_FILE=
SAPINST_GLOBAL_PARAMETER_TABLE=
SAPINST_GUI_ACCESSIBLE=0
SAPINST_HTTP_PORT=4239
SAPINST_INIFILE_MODE=
SAPINST_INIFILE_PARAMETER_MODE=
SAPINST_INPUT_PARAMETERS_URL=
SAPINST_INSTANCE_ID_GENERATION=
SAPINST_JAVA_CODE_GENERATION=
SAPINST_JAVA_COMPONENT_GEN_DIRECTORY=
SAPINST_JAVA_COMPONENT_GEN_LOG_FILENAME=
SAPINST_JAVA_COMPONENT_SNIPPET_DIRECTORY=
SAPINST_JAVA_COMPONENT_SNIPPET_NAME=
SAPINST_JAVA_EXT_DIR_DIRECTORY=
SAPINST_JRE_HOME=C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,NWProfiles,ClusterMgt,SystemIdentity,NetworkMgt
SAPINST_JS_DEBUG=
SAPINST_JVM_PROPERTIES=
SAPINST_KEYDB_URL=keydb.xml
SAPINST_LABEL_IDX_URL=
SAPINST_LOG_GUI_UPDATE=0
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_DEVLOG_THRESHOLD=flow_trace
SAPINST_MESSAGE_GUILOG_THRESHOLD=info
SAPINST_MESSAGE_HEADER=
SAPINST_MESSAGE_URL=.
SAPINST_MSLIB_TRACE=1
SAPINST_NO_GUISTART=0
SAPINST_NO_STEPBACK=0
SAPINST_OUTPUT_DIR=C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
SAPINST_PACKAGES_URL=packages.xml
SAPINST_PARAMETER_CONTAINER_URL=
SAPINST_PORT_AUTO=0
SAPINST_PROPERTIES_4_JAVA_STEPS_JVM=
SAPINST_REMOTE_ACCESS_USER=
SAPINST_REMOTE_ACCESS_USER_IS_TRUSTED=0
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_RFCLIB_TRACE=0
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SDT_CURDIR_MODE=
SAPINST_SDT_PASSWORD=**********
SAPINST_SDT_USER=
SAPINST_SEND_ANALYTICS=true
SAPINST_SET_STEPSTATE=0
SAPINST_SKIP_DIALOGS=false
SAPINST_SKIP_ERRORSTEP=0
SAPINST_SKIP_SOLMAN_CHECK=0
SAPINST_SKIP_SUCCESSFULLY_FINISHED_DIALOG=0
SAPINST_SKIP_SUMMARY_DIALOG=0
SAPINST_SLIDE_SHOW_URL=slideshow.xml
SAPINST_SLP_CHANNEL_NAME=
SAPINST_SMART_COMPONENT=
SAPINST_STACK_XML=
SAPINST_START_GUI=1
SAPINST_START_GUISERVER=1
SAPINST_STEP_EXECUTION_MODE=
SAPINST_STOP_AFTER_DIALOG_PHASE=0
SAPINST_SUCCESS_ID=
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=1
SAPINST_USE_DETAILED_LOG_DIRECTORY=0
SAPINST_USE_DEV_FEATURES=
SAPINST_USE_FWK_JSLIB=true
SAPINST_USE_HOSTNAME=
SAPINST_USE_MID=0
SAPINST_USE_OSBITS=
SAPINST_USE_OSFAName=
SAPINST_WRITE_GUIENGINE_BACKEND_TRACE=
SAP_DIR_PERF=C:\usr\sap\PRFCLOG
SELFEXTRACTOR_EXECUTABLE_NAME=G:/SOFT/COM/INST/sapinst.exe
SESSIONNAME=Console
SYSLIB_LOCKING_MODEL=
SecSpecialMode=710916
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\ADMINI~1\AppData\Local\Temp
TMP=C:\Users\ADMINI~1\AppData\Local\Temp
USERDOMAIN=RZABLAH01
USERDOMAIN_ROAMINGPROFILE=RZABLAH01
USERNAME=Administrator
USERPROFILE=C:\Users\Administrator
jce_policy_zip=
windir=C:\Windows
TRACE 2014-09-24 21:10:39.595 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaejs722.dll
TRACE 2014-09-24 21:10:39.631 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iacdlib722.dll
TRACE 2014-09-24 21:10:39.635 [ccdmanagerpackagexml.cpp:128]
CCdManagerPackageXml::readLabelDefinitionFile()
Add packages from packages.xml; packageName:SAPINST, label: IND:SLTOOLSET:1.0:SWPM:*:WINDOWS_X86_64:*, media name:Software Provisioning Manager
Add packages from packages.xml; packageName:KERNEL, label: SAP:AKK:741:KERNEL:*:WINDOWS_X86_64:*, media name:Kernel NW740 SR1
Add packages from packages.xml; packageName:UKERNEL, label: SAP:AKK:741:UKERNEL:*:WINDOWS_X86_64:*, media name:UC Kernel NW740 SR1
Add packages from packages.xml; packageName:GATEWAY, label: SAP:AKK:741:KERNEL:*:WINDOWS_X86_64:*, media name:Kernel NW740 SR1
Add packages from packages.xml; packageName:CA, label: SAP:CA:741:UKERNEL:*:WINDOWS_X86_64:, media name:UC Kernel NW740 SR1 (folder CA)
Add packages from packages.xml; packageName:SMD, label: SAP:SMD:741:UKERNEL:*:WINDOWS_X86_64:, media name:UC Kernel NW740 SR1 (folder SMD)
Add packages from packages.xml; packageName:SCS, label: SAP:AKK:741:UKERNEL:*:WINDOWS_X86_64:*, media name:UC Kernel NW740 SR1
Add packages from packages.xml; packageName:SAPLUP, label: SAP:SAPLUP:741:*:*:*, media name:SL Controller (Kernel DVD)
Add packages from packages.xml; packageName:SCA_2, label: SAP:UT_ERP:SR1BS7I2013EHP7:*:*:*, media name:Java Component BS7i2013 SR1 on NW740 SR1
Add packages from packages.xml; packageName:J2EE, label: SAP:J2EE-CD:SR1740:J2EE-CD:j2ee-cd:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP)
Add packages from packages.xml; packageName:J2EE-ENG, label: SAP:J2EE-INST:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_J2EE_INST)
Add packages from packages.xml; packageName:J2EE-INST, label: SAP:J2EE-INST:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_J2EE_INST)
Add packages from packages.xml; packageName:SCA, label: SAP:UT:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_J2EE_OSINDEP_UT)
Add packages from packages.xml; packageName:CTC, label: SAP:CTC:NW04S:*:*:*, media name:Java Component NW740 SR1
Add packages from packages.xml; packageName:JAVA_EXPORT, label: SAP:JEXPORT:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_EXPORT)
Add packages from packages.xml; packageName:JDMP, label: SAP:JDMP:SR1740:*:*:*, media name:Java Component NW740 SR1 (folder JAVA_EXPORT_JDMP)
Add packages from packages.xml; packageName:JDMP_01, label: SAP:BPM_JDMP:SR1740:*:*:*, media name:Java Export SR1 (Vol.01)
Add packages from packages.xml; packageName:JDMP_02, label: SAP:JDMP_02:SR1740:*:*:*, media name:Java Export SR1 (Vol.02)
Add packages from packages.xml; packageName:JDMP_03, label: SAP:JDMP_03:SR1740:*:*:*, media name:Java Export SR1 (Vol.03)
Add packages from packages.xml; packageName:JDMP_04, label: SAP:JDMP_04:SR1740:*:*:*, media name:Java Export SR1 (Vol.04)
Add packages from packages.xml; packageName:JDMP_05, label: SAP:JDMP_05:SR1740:*:*:*, media name:Java Export SR1 (Vol.05)
Add packages from packages.xml; packageName:JDMP_06, label: SAP:JDMP_06:SR1740:*:*:*, media name:Java Export SR1 (Vol.06)
Add packages from packages.xml; packageName:JDMP_07, label: SAP:JDMP_07:SR1740:*:*:*, media name:Java Export SR1 (Vol.07)
Add packages from packages.xml; packageName:JDMP_08, label: SAP:JDMP_08:SR1740:*:*:*, media name:Java Export SR1 (Vol.08)
Add packages from packages.xml; packageName:JDMP_09, label: SAP:JDMP_09:SR1740:*:*:*, media name:Java Export SR1 (Vol.09)
Add packages from packages.xml; packageName:JDMP_10, label: SAP:JDMP_10:SR1740:*:*:*, media name:Java Export SR1 (Vol.10)
Add packages from packages.xml; packageName:EXPORT1, label: SAP:ECC:SR1617:EXPORT(1/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT2, label: SAP:ECC:SR1617:EXPORT(2/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT3, label: SAP:ECC:SR1617:EXPORT(3/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT4, label: SAP:ECC:SR1617:EXPORT(4/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT5, label: SAP:ECC:SR1617:EXPORT(5/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT6, label: SAP:ECC:SR1617:EXPORT(6/11):*:*, media name:Installation Export 1 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT7, label: SAP:ECC:SR1617:EXPORT(7/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT8, label: SAP:ECC:SR1617:EXPORT(8/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT9, label: SAP:ECC:SR1617:EXPORT(9/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT10, label: SAP:ECC:SR1617:EXPORT(10/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:EXPORT11, label: SAP:ECC:SR1617:EXPORT(11/11):*:*, media name:Installation Export 2 ECC 6.0 EhP7 SR1
Add packages from packages.xml; packageName:MIGJDMP, label: SAP:MIGJDMP:73:*:*:*, media name:Migration Export (MIGJDMP)
Add packages from packages.xml; packageName:MIGAPPS, label: SAP:MIGAPPS:73:MIGRATION:*:*, media name:Migration Export (MIGAPPS)
Add packages from packages.xml; packageName:JMIG, label: SAP:JMIG:73:*:*:*, media name:Migration Export (JMIG)
Add packages from packages.xml; packageName:MIGEXPORT1, label: SAP:MIG:*:EXPORT(1/:*:*, media name:Migration Export (MIGEXPORT)
Add packages from packages.xml; packageName:RDBMS-ADA, label: MAXDB:*:RDBMS:MAX DB:WINDOWS_X86_64:*, media name:RDBMS MaxDB
Add packages from packages.xml; packageName:RDBMS-DB6, label: DB2/LUW:*:RDBMS:DB2/LUW:WINDOWS_X86_64:*, media name:RDBMS IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB6-CLIENT, label: DB2/LUW:*:CLI/JDBC-DRIVER:DB2/LUW:*, media name:CLI/JDBC-Driver IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB2-CLIENT, label: SAP:RDBMS-Client:10.1:DB2CONNECT:DB2 Connect for zSeries:*, media name:RDBMS Client IBM DB2 10 for z/OS
Add packages from packages.xml; packageName:TSAMP-DB6, label: IBM/TSA:*:DVD_TSAMP:*:*, media name:IBM Tivoli Systems Automation for Multiplatforms
Add packages from packages.xml; packageName:RDBMS-ORA, label: ORACLE:10.0G:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle
Add packages from packages.xml; packageName:RDBMS-ORA2, label: ORACLE:10.0G:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 2
Add packages from packages.xml; packageName:RDBMS-ORA112, label: ORACLE:11.2:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112
Add packages from packages.xml; packageName:RDBMS-ORA1122, label: ORACLE:11.2:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112 2
Add packages from packages.xml; packageName:ORACLI, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:ORACLI112, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:RDBMS-MSS, label: MSSQL:*:*:RDBMS:*:*, media name:RDBMS MS SQL Server
Add packages from packages.xml; packageName:RDBMS-SYB, label: SYBASE:*:RDBMS:*:WINDOWS_X86_64:*, media name:SAP ASE
Add packages from packages.xml; packageName:SRS-SYB, label: SYBASE:*:SRS:*:WINDOWS_X86_64:*, media name:SAP Replication Server
Add packages from packages.xml; packageName:RDBMS-HDB, label: HDB_SERVER:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Server
Add packages from packages.xml; packageName:RDBMS-HDB-CLIENT, label: HDB_CLIENT:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Client
Add packages from packages.xml; packageName:RDBMS-ADA, label: MAXDB:*:RDBMS:MAX DB:WINDOWS_X86_64:*, media name:RDBMS MaxDB
Add packages from packages.xml; packageName:RDBMS-DB6, label: DB2/LUW:*:RDBMS:DB2/LUW:WINDOWS_X86_64:*, media name:RDBMS IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB6-CLIENT, label: DB2/LUW:*:CLI/JDBC-DRIVER:DB2/LUW:*, media name:CLI/JDBC-Driver IBM DB2 for Linux, UNIX and Windows
Add packages from packages.xml; packageName:RDBMS-DB2-CLIENT, label: SAP:RDBMS-Client:10.1:DB2CONNECT:DB2 Connect for zSeries:*, media name:RDBMS Client IBM DB2 10 for z/OS
Add packages from packages.xml; packageName:TSAMP-DB6, label: IBM/TSA:*:DVD_TSAMP:*:*, media name:IBM Tivoli Systems Automation for Multiplatforms
Add packages from packages.xml; packageName:RDBMS-ORA, label: ORACLE:10.0G:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle
Add packages from packages.xml; packageName:RDBMS-ORA2, label: ORACLE:10.0G:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 2
Add packages from packages.xml; packageName:RDBMS-ORA112, label: ORACLE:11.2:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112
Add packages from packages.xml; packageName:RDBMS-ORA1122, label: ORACLE:11.2:RDBMS(2/:*:WINDOWS_X86_64:*, media name:RDBMS Oracle 112 2
Add packages from packages.xml; packageName:RDBMS-ORA121, label: ORACLE:12.1:RDBMS:*:WINDOWS_X86_64:*, media name:Oracle RDBMS 121
Add packages from packages.xml; packageName:RDBMS-ORA1212, label: ORACLE:12.1:RDBMS(2/:*:WINDOWS_X86_64:*, media name:Oracle RDBMS 121 2
Add packages from packages.xml; packageName:ORACLI, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:ORACLI112, label: ORACLE:11.2:CLIENT:*:WINDOWS_X86_64:*, media name:RDBMS Client Oracle
Add packages from packages.xml; packageName:RDBMS-MSS, label: MSSQL:*:*:RDBMS:*:*, media name:RDBMS MS SQL Server
Add packages from packages.xml; packageName:RDBMS-SYB, label: SYBASE:*:RDBMS:*:WINDOWS_X86_64:*, media name:SAP ASE
Add packages from packages.xml; packageName:SRS-SYB, label: SYBASE:*:SRS:*:WINDOWS_X86_64:*, media name:SAP Replication Server
Add packages from packages.xml; packageName:RDBMS-HDB, label: HDB_SERVER:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Server
Add packages from packages.xml; packageName:RDBMS-HDB-CLIENT, label: HDB_CLIENT:*:RDBMS:*:WINDOWS_X86_64:*, media name:RDBMS HANA Client
Add packages from packages.xml; packageName:LIVECACHE, label: LIVECACHE:LCA10:LC79:WINDOWS_X86_64:*, media name:liveCache 7.9
Add packages from packages.xml; packageName:SAP_CS, label: SAP:SAP_CS:*:*:PPMS component SAP_CS:PPMS-LABEL, media name:Content Server 6.40/6.50
TRACE 2014-09-24 21:10:39.644 [ccdmanagerimpl.cpp:312]
CCdManagerImpl::goToRootDirAndScanForPackages()
Searching for packages. Found: IND:SLTOOLSET:1.0:SWPM:*:WINDOWS_X86_64:* in G:/SOFT/COM/INST
Searching for packages - not a valid path or not accessible: G:/SOFT/COM\/LABEL.ASC
Searching for packages. Nothing found in G:/SOFT/COM\
Searching for packages - not a valid path or not accessible: G:/SOFT\/LABEL.ASC
Searching for packages. Nothing found in G:/SOFT\
Searching for packages - not a valid path or not accessible: G://LABEL.ASC
Searching for packages. Nothing found in G:/
TRACE 2014-09-24 21:10:39.656 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362\iaccdlib.dll
TRACE 2014-09-24 21:10:39.656 [ccdmanagerimpl.cpp:872]
CCdManagerImpl::lookForPackages()
WARNING 2014-09-24 21:10:39.657 [synxcpath.cpp:1010]
CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Unable to get information about path \\LABEL.ASC\ using GetVolumeInformation. Operating system error message: The specified path is invalid.
TRACE 2014-09-24 21:10:39.658 [ccdmanagerimpl.cpp:872]
CCdManagerImpl::lookForPackages()
TRACE 2014-09-24 21:10:39.839
SAPinst build information:
Version: 2014.09.0
Build: 1521363
Compile time: Sep 15 2014 - 16:33:56
Make type: optU
Codeline: 720-2_REL
Platform: NTAMD64
Kernel build: 721, patch 319, changelist 1516453
Exe directory: C:\Users\ADMINI~1\AppData\Local\Temp\sapinst_exe.2796.1411607362
TRACE 2014-09-24 21:10:39.849 [syxxsyshlp.cpp:151]
syslib::logSystemState() lib=syslib module=syslib
Process environment
===================
Environment Variables
=====================
=C:=C:\Program Files\sapinst_instdir\BS2013\BS2013SR1\ERP607SR1\ORA\INSTALL\STD\ABAP
=G:=G:\SOFT\COM\INST
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Administrator\AppData\Roaming
COMPUTERNAME=RZABLAH01
ComSpec=C:\Windows\system32\cmd.exe
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Administrator
JAVA_HOME=C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)
LOCALAPPDATA=C:\Users\Administrator\AppData\Local
LOGONSERVER=\\RZABLAH01
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PLMVIS_82_LIBPATH=C:\Program Files (x86)\SAP\FrontEnd\SAPgui\Program
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3a09
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
Path=C:\oracle\ECC\11203\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\SAP\SAP JVM 6 (61_REL i486 opt)\bin
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
SAPINST_EXEDIR_CD=G:/SOFT/COM/INST
SAPINST_JRE_HOME=C:/Users/ADMINI~1/AppData/Local/Temp/sapinst_exe.2796.1411607362/jre
SAP_DIR_PERF=C:\usr\sap\PRFCLOG
SELFEXTRACTOR_EXECUTABLE_NAME=G:/SOFT/COM/INST/sapinst.exe
SESSIONNAME=Console
SecSpecialMode=710916
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\ADMINI~1\AppData\Local\Temp
TMP=C:\Users\ADMINI~1\AppData\Local\Temp
USERDOMAIN=RZABLAH01
USERDOMAIN_ROAMINGPROFILE=RZABLAH01
USERNAME=Administrator
USERPROFILE=C:\Users\Administrator
windir=C:\Windows
User: RZABLAH01\Administrator, Id: S-1-5-21-3086296020-3121675482-1484945983-500
Working directory: C:/Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeTimeZonePrivilege, display name: Change the time zone, not enabled.
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeCreateSymbolicLinkPrivilege, display name: Create symbolic links, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, diHello Rafael,
I'm also about to install an IDES EHP7 ERP 6.0 and have seen that the Support Release 2 is available. Perhaps this will help you to go forward.
Best regards,
GP -
Installation EHP (1+2+3) 4 and Installation NW EHP1
Hello,
We have to install all EHP (1-4) for our ERP 6.0 (SPS9), and as well the EHP 1 for NW.
We have all DVDs available (EHP4 READY, etc.)
Have I install first the EHP 3 via SPAM/SAINT, and then the EHP4 with the EHPi ?
Or can I start the installation with the DVD "EHP4 / EHP1NW Upgrade Master" ? If yes, how? There are just archives..
Regards,Dear Rainer,
the "EHP4 ready" DVD is for new customers (basically this is an up-to-date "ECC Server 6.0" without any EHP4 application components).
As you have an existing ECC system you have to use the Maintenance Optimizer (SolMan 7.0 EHP1) to download the EHP and Support packages and generate the stack XML (which the EHP Installer requires).
It makes no sense to install EHP3 (or any SP's first) - you will just double the effort. Hence SAP recommends to install EHP4 (with the EHP Installer) in one step.
Note that there is only one technical exception: 32 Bit platforms, please refer to the Master Guide for more information.
A good starting point to understand the overall concept is the Must Know Guide:
http://service.sap.com/~sapidb/011000358700001166742007E
To learn more about the step-by-step the E2E EHP4 installation procedure I can recommend the How-To-Install EHP4 guide:
http://service.sap.com/~sapidb/011000358700000293582009E.PDF
Best regards,
Christian. -
Problem During Installation of ECC 6 on Windows 2003
<b><b>Here I am facing problem during Import ABAP Phase.
It is throwing Error like that::
CJS-30022 Program 'Migration Moitor' exists with return code 103.
After completeing 9 stages, it's getting problem in Import packages and installation get stucked.
My Server is like that:
OS: Windows Server 2003
Hardware: HP Itanium IA64
Database: Oracle 10.2g
SAP Release : 2004s ECC 6
I have configured Java with j2sdk 1.4.2_12:
JRE 1.5 is not available for IA64 .
I reconfigured the parameter "shared_pool_size" (to 400MB)in init<sid>.ora at \oracle\<sid>\database.
Also adjusted another parameter which is "shared_pool_reserved_size" i.e. 10% of the shared_pool_size.
What to do now.
Please send me feed backs.
Regards,
Sumanta Chatterjee
</b></b> <b></b>run 'ls -lrta' in /tmp/sapinst_instdir/.... (whatever the lowest path is there, where all the log files are). You should see something like sap<something>.tsk and sap<something>.log. Look at the most recently updated sap<something>.log file for the specific error. One problem I've seen is that if you configure the advanced oracle config to turn off AUTOEXTEND on the tablespaces, the abap load will bomb because it runs out of space. Also, make sure your SYSTEM tablespace has at least 500M.
Posting the relevant contents of the log with the detailed error description would help us provide a better answer as well.
Rich -
Error During installation of ECC 6.0 EHP5 on windows and Oracle
Dear All,
I am facing an error at the Phase 1 of installation i.e creating users.
Creating account Domain
\SAP_SID_GlobalAdmin for system SID,
Please provide your sugegstions on this ASAP.
OS: Windows Server 2008
Database: Oracle 11g
SAP: ECC 6.0 EHP5
Error details :
An error occurred while processing option SAP Business Suite 7i 2010 > Enhancement Package 5 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step: System call failed. Error -2147024891 (Access is denied. ) in execution of system call 'IADsGroup::SetInfo' with parameter (), line (976) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcgroup.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 891: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbaccount.cpp: 85: CIaOsAccount::createGroup_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcaccmg.cpp: 190: PSyGroupInt CSyAccountMgtImpl::createGroup(iastring sName, iastring sSID, ISyProgressObserver*) const d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\syxxccache.cpp: 244: CSyAccountCache::getGroupImpl(name="NMCORP\SAP_BRT_GlobalAdmin", sid="", create=true, ISyAccountMgt::eAccountType, ISyProgressObserver* ) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcgroup.cpp: 54: CSyGroupImpl::CSyGroupImpl(NMCORP\SAP_BRT_GlobalAdmin, , bool bCreate) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcgroup.cpp: 828: CSyGroupImpl::addToOS(ISyProgressObserver* pObserver) .). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log file:
TRACE 2014-08-08 14:17:59.293 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\\sylib722.dll
TRACE 2014-08-08 14:17:59.293
exe dir is C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864
TRACE 2014-08-08 14:17:59.512
MessageLib initialized successfully.
INFO 2014-08-08 14:17:59.527 [synxcpath.cpp:798]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel_test_08_Aug_2014_14_17_59.
INFO 2014-08-08 14:17:59.527 [synxcfile.cpp:368]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel_test_08_Aug_2014_14_17_59.
TRACE 2014-08-08 14:17:59.543 [syxxclogbook.cpp:211]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel
TRACE 2014-08-08 14:17:59.543 [csicomponentsetmanager.cpp:111]
CSiComponentSetManager::readFrameworkJslib()
Reading framework jslib.
TRACE 2014-08-08 14:18:00.981 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\iaguieng722.dll
TRACE 2014-08-08 14:18:00.981 [syxxclogbook.cpp:211]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file dev_sap_kernel
TRACE 2014-08-08 14:18:00.996
Waiting for client connection (1)
TRACE 2014-08-08 14:18:06.684 [synxcuser.cpp:2083]
CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
existence check for user brtadm returned true.
TRACE 2014-08-08 14:18:06.684 [syxxccache.cpp:419]
CSyAccountCache::addToCache(const IaPtr<CSyAccountImpl> account)
lib=syslib module=syslib
inserted account (brtadm, S-1-5-21-575922271-569720141-4272231626-387102, USER) into the accountcache.
TRACE 2014-08-08 14:18:06.684 [synxccuren.cpp:901]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'C:/Users/brtadm/AppData/Local/Temp/2/sapinst_exe.3932.1407503864/jre')
lib=syslib module=syslib
Environment variable SAPINST_JRE_HOME set to value 'C:/Users/brtadm/AppData/Local/Temp/2/sapinst_exe.3932.1407503864/jre'.
INFO 2014-08-08 14:18:07.716 [synxcpath.cpp:798]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel_test_08_Aug_2014_14_18_07.
INFO 2014-08-08 14:18:07.716 [synxcfile.cpp:368]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel_test_08_Aug_2014_14_18_07.
TRACE 2014-08-08 14:18:08.216
exe dir is C:/Users/brtadm/AppData/Local/Temp/2/sapinst_exe.3932.1407503864
INFO 2014-08-08 14:18:08.247 [synxcpath.cpp:798]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2014-08-08 14:18:08.247 [synxcfile.cpp:368]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE 2014-08-08 14:18:08.247 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\iakdblib722.dll
TRACE 2014-08-08 14:18:08.247
SAPinst build information:
abi version: 722
make variant: 720_REL
build: 1453085
compile time: Nov 28 2013 17:52:45
make type: optU
codeline: 720-2_REL
platform: NTAMD64
Exe directory: C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864
regards
RakeshDear Divya,
please find the log details.
TRACE 2014-08-08 14:17:59.293 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\\sylib722.dll
TRACE 2014-08-08 14:17:59.293
exe dir is C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864
TRACE 2014-08-08 14:17:59.512
MessageLib initialized successfully.
INFO 2014-08-08 14:17:59.527 [synxcpath.cpp:798]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel_test_08_Aug_2014_14_17_59.
INFO 2014-08-08 14:17:59.527 [synxcfile.cpp:368]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel_test_08_Aug_2014_14_17_59.
TRACE 2014-08-08 14:17:59.543 [syxxclogbook.cpp:211]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel
TRACE 2014-08-08 14:17:59.543 [csicomponentsetmanager.cpp:111]
CSiComponentSetManager::readFrameworkJslib()
Reading framework jslib.
TRACE 2014-08-08 14:18:00.981 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\iaguieng722.dll
TRACE 2014-08-08 14:18:00.981 [syxxclogbook.cpp:211]
PSyLogBook::initSAPKernelTracing(int traceLevel, const CSyPath & filePath)
lib=syslib module=syslib
Initialized SAP kernel tracing to file dev_sap_kernel
TRACE 2014-08-08 14:18:00.996
Waiting for client connection (1)
TRACE 2014-08-08 14:18:06.684 [synxcuser.cpp:2083]
CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
existence check for user brtadm returned true.
TRACE 2014-08-08 14:18:06.684 [syxxccache.cpp:419]
CSyAccountCache::addToCache(const IaPtr<CSyAccountImpl> account)
lib=syslib module=syslib
inserted account (brtadm, S-1-5-21-575922271-569720141-4272231626-387102, USER) into the accountcache.
TRACE 2014-08-08 14:18:06.684 [synxccuren.cpp:901]
CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPINST_JRE_HOME', const iastring & 'C:/Users/brtadm/AppData/Local/Temp/2/sapinst_exe.3932.1407503864/jre')
lib=syslib module=syslib
Environment variable SAPINST_JRE_HOME set to value 'C:/Users/brtadm/AppData/Local/Temp/2/sapinst_exe.3932.1407503864/jre'.
INFO 2014-08-08 14:18:07.716 [synxcpath.cpp:798]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel_test_08_Aug_2014_14_18_07.
INFO 2014-08-08 14:18:07.716 [synxcfile.cpp:368]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\dev_sap_kernel_test_08_Aug_2014_14_18_07.
TRACE 2014-08-08 14:18:08.216
exe dir is C:/Users/brtadm/AppData/Local/Temp/2/sapinst_exe.3932.1407503864
INFO 2014-08-08 14:18:08.247 [synxcpath.cpp:798]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2014-08-08 14:18:08.247 [synxcfile.cpp:368]
CSyFileImpl::removeEx(ISyFSErrorHandler * pErrorHandler)
lib=syslib module=syslib
Removed file C:\Program Files\sapinst_instdir\x.
TRACE 2014-08-08 14:18:08.247 [iaxxclib.cpp:174]
CLib::load()
Opened C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864\iakdblib722.dll
TRACE 2014-08-08 14:18:08.247
SAPinst build information:
abi version: 722
make variant: 720_REL
build: 1453085
compile time: Nov 28 2013 17:52:45
make type: optU
codeline: 720-2_REL
platform: NTAMD64
Exe directory: C:\Users\brtadm\AppData\Local\Temp\2\sapinst_exe.3932.1407503864
regards
Rakesh -
Solution manager 7.1 installation in ECC 6.0 landscape
Dear All,
I am planning to install solman 7.1 SP04 in my landscape where the managed systems are running on ECC 6.0. SP 07(PRD, DEV,...).
Is it fine to start installation with current landscape or i need to upgrade the ECC version.
Any documents available regarding the technical system patch level requirements for Solution manager 7.1 installation.
Please suggest.Hi Jithu,
Pls refer below links,
Solution Manager installation 7.1
SAP Solution Manager 7.1 – SAP Help Portal Page
Dia Agent Connect To system in solman 7.1 sp10
Regards
K.N -
Error in installation of ECC IDES 6 - at abap import
i am getting import monitor failed during ecc6 setup on vmware with win 2003 enterprise, ram 2000 mb with 400 gb esata disk.
installing ECC6 SR2 IDES on Oracle with just the abap dump.
following is from the import_monitor log file:
TRACE: 2009-07-14 09:31:41 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is started.
TRACE: 2009-07-14 09:31:41 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is started.
TRACE: 2009-07-14 09:31:41 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLEXC' import package into database:
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
TRACE: 2009-07-14 09:31:41 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPCLUST' import package into database:
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
ERROR: 2009-07-14 09:31:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is interrupted with R3load error.
Process 'C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error' exited with return code 2.
For mode details see 'SAPCLUST.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-07-14 09:31:48 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is interrupted with R3load error.
Process 'C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSLEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2009-07-14 09:32:11
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-07-14 09:32:11
2 error(s) during processing of packages.
INFO: 2009-07-14 09:32:11
Import Monitor is stopped.
i am stuck on 17 out of 19 jobs completed.
i have ran a fresh installation like 3 to 4 times getting stuck on the same error.
can anyone help? does anyone know what is going on?
thanks a lot.a log of sapclust is as follows:
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714054034
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\inst\ecc 6\export\51032413_4\EXP4\DATA\SAPCLUST.STR C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\DD LORA.TPL SAPCLUST.TSK ORA -l SAPCLUST.log
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: job completed
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090714054035
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714054036
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(CREATE TABLE "AABLG" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "BELNR" VARCHAR2(30) DEFAULT ' ' NOT NULL , "PAGENO" NUMBER(5) DEFAULT 0 NOT NULL , "TIMESTMP" VARCHAR2(138) DEFAULT ' ' NOT NULL , "PAGELG" NUMBER(5) DEFAULT 0 NOT NULL , "VARDATA" BLOB ) TABLESPACE PSAPSR3 LOB ("VARDATA") STORE AS (CACHE) STORAGE (INITIAL 1854762 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 102
(SQL error 955)
error message returned by DbSl:
ORA-00955: name is already used by an existing object
(DB) INFO: disconnected from DB
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090714054039
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714060640
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: AABLG dropped #20090714060646
(DB) INFO: AABLG created #20090714060649
(IMP) INFO: import of AABLG completed (2747 rows) #20090714060650
(DB) INFO: AABLG~0 created #20090714060650
(DB) ERROR: DDL statement failed
(CREATE TABLE "CDCLS" ( "MANDANT" VARCHAR2(9) DEFAULT '000' NOT NULL , "OBJECTCLAS" VARCHAR2(45) DEFAULT ' ' NOT NULL , "OBJECTID" VARCHAR2(270) DEFAULT ' ' NOT NULL , "CHANGENR" VARCHAR2(30) DEFAULT ' ' NOT NULL , "PAGENO" NUMBER(5) DEFAULT 0 NOT NULL , "TIMESTMP" VARCHAR2(138) DEFAULT ' ' NOT NULL , "PAGELG" NUMBER(5) DEFAULT 0 NOT NULL , "VARDATA" BLOB ) TABLESPACE PSAPSR3 LOB ("VARDATA") STORE AS (CACHE) STORAGE (INITIAL 217644662 NEXT 0000010240K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 102
(SQL error 955)
error message returned by DbSl:
ORA-00955: name is already used by an existing object
(DB) INFO: disconnected from DB
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090714060650
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714061828
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090714061828
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714062551
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090714062551
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714062632
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090714062633
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714084341
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090714084349
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714084829
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090714084829
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090714085302
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 01:28:45
C:\usr\sap\ERT\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: CDCLS dropped #20090714085310
(DB) INFO: CDCLS created #20090714085310
(IMP) INFO: import of CDCLS completed (576572 rows) #20090714085516
(DB) INFO: CDCLS~0 created #20090714085542
(DB) INFO: CLU4 created #20090714085543
(IMP) INFO: import of CLU4 completed (0 rows) #20090714085543
(DB) INFO: CLU4~0 created #20090714085543
(DB) INFO: CLUSTERVER created #20090714085543
(IMP) INFO: import of CLUSTERVER completed (0 rows) #20090714085543
(DB) INFO: CLUSTERVER~0 created #20090714085543
(DB) INFO: CLUTAB created #20090714085543
(IMP) INFO: import of CLUTAB completed (0 rows) #20090714085543
(DB) INFO: CLUTAB~0 created #20090714085543
(DB) INFO: CVEP1 created #20090714085543
(IMP) INFO: import of CVEP1 completed (0 rows) #20090714085543
(DB) INFO: CVEP1~0 created #20090714085543
(DB) INFO: CVEP2 created #20090714085543
(IMP) INFO: import of CVEP2 completed (0 rows) #20090714085543
(DB) INFO: CVEP2~0 created #20090714085543
(DB) INFO: CVER1 created #20090714085543
(IMP) INFO: import of CVER1 completed (0 rows) #20090714085543
(DB) INFO: CVER1~0 created #20090714085544
(DB) INFO: CVER2 created #20090714085544
(IMP) INFO: import of CVER2 completed (0 rows) #20090714085544
(DB) INFO: CVER2~0 created #20090714085544
(DB) INFO: CVER3 created #20090714085545
Edited by: Ameya Deshpande on Jul 19, 2009 6:20 AM
Edited by: Ameya Deshpande on Jul 19, 2009 6:22 AM -
Suggestion on Installation of ECC 6.0 IDES Version
Hi,
I am installing ECC 6.0 IDES in windows server 2003 with MSSQL Server 2005 as database. What should be the size I should allocate for the installation directory? Because when I have tried the same previously the files grow more than 10GB and since I dont have enough space the installation fails. Suggest me on this and also let me know is there any other factors to be considered before installation. I have also planned to install solution manager in same server. which java version shall i use?
Hard disk: 400GB and memory 3GB
Kindly suggest in this regards.
regards,
Anandha Krishnan.RIs this the standalone system ur performing or client servers,configuration what u have is more than enough, u need to have soultion manger key for installing ECC6 any quries can mail to [email protected]
-
Hi guys
I am about to install Swedish Baseline 2.6 and that is on top of a SAP ECC 6.0 installation.
Question I have is exactly where do I found ECC 6.0 installation? My guess is that it is a part of Netweaver 7.0 but when downloading "Installation Master" and looking at the different selections I can not see an option for ECC 6.0.
I want to make sure after installing I have an ECC 6.0 :-). Any input I appreciate of course, any links to where to find the right media to download?
Plattform we are using is Windows 64 bit and Max DB is the one we are going for.
Thanks in advance... //PElleHi, thank you. I am a bit ahead and still I am very puzzled, I did as you said found out that ECC 6.0 is a part of ERP 6.0 that is available to download. Also I found that you need ERP 6.0 as well as Netweaver 7.0 in order to have a complete installtation kit.
Only problem is that I do not find any "Master Installation" that gives me opportunity to install a Central and DB instance, either in NW 7.0 or in ERP 6.0.
If I look at downloads under SAP Marketplace and My Companys application --> "SAP ERP", I go for "SAP ERP 6.0" and my guess was that all media I needed was partily here and under "SAP NETWEAVER 7.0" (?).
Have anyone experience from installed ECC 6.0 (?). What is the proper progress?
1. Start Master Installation
2. Checkbox ERP 6.0 and Netweaver 7.0 ??
Or is there a installation of NW 7.0 first and ERP 6.0 as an addon ?
I can not get a grip of where to start, any points in forward direction is appreciated -
Installation of ECC 6.0 on vmware
Dear Team,
I am trying to install ECC 6.0 on VMware workstation, to simulate existing environment.
I have an external HDD of 500 GB out of which I have reserved 290GB for ECC installation.
The VM has 3 GB of memory allocated.
Operating system: windows 2003 sp2
DB: sql 2005, I have verified that tables have been created using sql
JRE 1.4.2_16
In VMware:
I have created C drive with 10 GB , and rest of the space D drive for database files and usr folder.
Installation kicked off well, without errors, I mean there were errors which said " if its a warning you can ignore.
I not able to see any progress in the installation, because logs are not being updated.
The installation GUI is responding well , however its not proceeding further. It has been 6 days that installation has started.
I am sure that ECC will take some time, but I hope not 6 days. Where to check the progress ? which logs do I need to verify?
Is it normal that on VMWare it will take so long time?
Need expert advice.
Regards
dpn ctlUday,
last few lines on the sapinst_dev.log:
do the lines "Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP2' is not connected. Returning path." indicate an error , what could be missing, some files in the dump?
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP2' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP3' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP4' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP5' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP6' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP7' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP8' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP9' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP10' is not connected. Returning path.
TRACE [iaxxbfile.cpp:139]
CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP11' is not connected. Returning path.
TRACE [synxccuren.cpp:939]
CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE [synxccuren.cpp:913]
CSyCurrentProcessEnvironmentImpl::setEffectiveUser(PSyUser,iastring)
effective user corresponds to real user
TRACE [synxccuren.cpp:467]
grantAccessTo
Granted access rights 0xf037f for object winsta0 to user OBTDEV20\oi1adm with inheritance flags 0.
TRACE [synxccuren.cpp:467]
grantAccessTo
Granted access rights 0xf01ff for object default to user OBTDEV20\oi1adm with inheritance flags 0.
INFO 2009-07-05 13:20:13 [synxccuren.cpp:877]
CSyCurrentProcessEnvironmentImpl::setUser()
Switched to user: oi1adm.
TRACE [synxccuren.cpp:913]
CSyCurrentProcessEnvironmentImpl::setEffectiveUser(PSyUser,iastring)
effective user corresponds to real user
TRACE [synxccuren.cpp:787]
CSyCurrentProcessEnvironmentImpl::setUser()
Terminated current impersonation.
INFO 2009-07-05 13:20:13 [synxcpath.cpp:776]
CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\import_monitor.java.log.
TRACE [synxctask.cpp:67]
CEnvironmentJanitor::CEnvironmentJanitor()
Changing current processenvironment
TRACE [synxccuren.cpp:467]
grantAccessTo
Granted access rights 0xf037f for object winsta0 to
regards
dpn
Edited by: dpn ctl on Jul 13, 2009 5:48 AM
Maybe you are looking for
-
Screen goes black when playing "Tiger Woods PGA Tour 08"
No need to mention that I am very happy with my new iMac. It replaces my G4 MDD PowerMac. The iMac is huge, quiet and fast on my graphic design jobs. I even won´t want to miss the glossy screen. Yesterday I received the brand new "Tiger Woods PGA Tou
-
I just bought a new Ipad mini a while ago, and created a new apple ID *********** , I can't download anything on apps store, it keeps on asking for a credit card but I don't have one. Can I create an account without a credit card? <Edited by Host>
-
5th gen. ipod not recognized by Mac
My 5th generation 30 gb ipod is no longer recognized by my Mac running 10.3.9 and iTunes 7. I've tried all of the standard troubleshooting except for restore since it can't be recognized to be restored. When it's plugged into the computer, it's charg
-
Pavillion TouchSmart touch stopped working after HP Photosmart Printer Installed
I bought a new HP Paviliion TouchSmart 23-h056 All-In-One and the touch screen worked just fine. I then installed a HP Photosmart 7520 All-In-One printer/scanner/copier and the mouse pointer works on the screen, but the touch on the monitor no longe
-
Hello! From my understanding there is a File class which has several methods e.g to get file name. The problem i am having is I am trying to implement a simple program which looks at the time file stamp and output the creation, access and modified ti