Installation error 1607: InstallSheet Scripting Runtime cannot be insalled

I was installing the upgrade 6.0.5 and it got stuck when installing the quicktime part so that I had to terminate the process. When I try to install again I get the error message: Installation error 1607: InstallSheet Scripting Runtime cannot be insalled. What can I do ?

Thanks for your suggestions; they helped me get further along in the resolution of my problem, but did not get me completely there.
I, too, have experienced the same problem tonight the OP had. Earlier tonight (before viewing this thread), I tried installing the latest update to Quick Time and was unable to complete it due to a problem, apparently, with InstallShield. The error message read "1607: Unable to install InstallShield scripting runtime." I found this thread and did as you suggested. I de-activated my firewall (Zone Alarm) and anti-virus (AVG) programs and installed the update, through the address you posted, to my desktop. When I opened the install, the install progressed somewhat further than earlier installs tonight, but then got hung up and the same message appeared. I would greatly appreciate any other suggestions or advice you or anyone else may have so I can resolve this problem. Thanks!
HP Windows XP

Similar Messages

Installation error - USBExpress.... cannot be used??!!

Hello All,
Every time I upgrade iTunes, or most other applications for that matter, I get the following error near to the end of the installation:
The system extension "/System/Library/Extensions/USBExpressCardCantWake_Huawei.kext" was installed improperly and cannot be used.
However installing updates / new applications works fine, it's just that I get the error message. Any ideas?

granthibbett wrote:
The system extension "/System/Library/Extensions/USBExpressCardCantWake_Huawei.kext" was installed improperly and cannot be used.
maybe this helps: http://forum.248am.com/viewtopic.php?f=7&t=11398.
JGG

"1607: Unable to install InstallShiled Scripting Runtime"

i had iTunes 5 for awhile because the newer version had bugs in it. I tried to update to iTunes 6 and installation froze while downloading the Quicktime portion. I tried installing iTunes 6 again but the error "1607: Unable to install InstallShiled Scripting Runtime" came up. I tried to uninstall iTunes completely but i could not find it on add/remove programs. Now I cant use iTunes or update my iPod.

hi indolence!
"iTunes cannot run because some of its required files are missing. Please reinstall iTunes."
ouch. by any chance did you do a System restore "over top" of the date of a fresh itunes install, without uninstalling itunes/QT first? that's a known cause of that error message ... what the system restore does is strip out some of the installation registry entries for the recent install. here's a good reference on what system restore does and doesn't do for you:
(MS) Frequently Asked Questions Regarding System Restore in Windows XP
it would probably also be a good idea to head to Windows update if you did a system restore, to make sure you're still thoroughly up to date in that regard. (the restore may have stripped out recent updates.)
Microsoft Windows Update
the "hang" during the QT install has sometimes been caused by having Cygwin running during the install:
iTunes 5 and QuickTime 7 for Windows: Installation won't work if Cygwin is running
... but other packages have also been implicated in this sort of thing. so prior to any installs, uninstalls or upgrades, it would be prudent in your case to switch off all background applications (including "terminate-and-stay-resident" applications):
Close Applications Running in the Background
to set up for the next attempt at an itunes install, it would be best to first uninstall your existing itunes/QT. use the complete uninstall instructions given here:
Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
if you run into trouble on the uninstall, try using the Windows Installer Cleanup utility:
Description of the Windows Installer CleanUp Utility
once you've got everything stripped out, try downloading and saving the itunes installer to your hard drive. (we'll run the install from there rather than online.)
iTunes 6.0.1.3 Installer
if you run into the the 1607, try the general and 1607-specific advice given in this document:
Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
... and if the problem persists, try augmenting that advice with the InstallShield Tips and Pointers:
InstallShield Consumer Central Frequently Asked Questions: Tips and Pointers
keep us posted on your progress.
love, b

1607:Unable to install InstallShield scripting runtime

I can't install iTunes, I get the error message saying:
1607:Unable to install InstallShield scripting runtime.
Need help... PLEASEEEEEEEEEE!!!!!!

Hi iFriend,
try this, it worked for me:
1) first of all, uninstall QuickTime and older versions of iTunes from your PC, using the "remove" button in the "install applications" tool that you find in the windows control panel.
2) reboot the system
3) turn off the windows firewall application; go into the windows control panel, double click on windows firewall and disable the firewall option
4) if you have one, disable your Anti-Virus application; i mean its real-time protection.
5) probably it's not necessary, but for being sure... download and launch the standalone installer of QuickTime (latest version)
6) download and launch the iTunes + QuickTime installer from this web address
7) as an option, i suggest you to download and install also iTunes Art Importer. It's a nice application, that allows you to import from the internet directly into iTunes the album ArtWorks of the selected tracks in iTunes. I installed it, and it works very well with iTunes 6.
8) after all the installations, remember to enable both firewall and anti-virus previously disabled!
as i said, probably the 5th passage is not necessary, but i did it and it worked!
if you have any questions or feedbacks, just relpy to this topic. stay iTuned!
bye, bye,
Marco

"Windows cannot find the microsoft software license terms" Windows 8.1 Installation Error - Parallels

I'm trying to install Windows 8.1 via Parallels on my Macbook Pro.
I create a new VM and use the .ISO file and get the error: "Windows cannot find the microsoft software license terms. Make sure the installation sources are valid and restart the installation."
I found this question was answered here: http://social.technet.microsoft.com/Forums/windows/en-US/b1021d66-9774-4b5b-b50b-ad860c5ecc89/windows-8-enterprise-rtm-installation-error?forum=w8itproinstall
However, following the steps of the solution did not work for me. I created a blank VM and chose Windows 8.1. After this, it asks me to insert the installation disc. I cannot figure out how to use the .ISO as the source at this point. I tried copying and
pasting the path to the file and dragging the file to the VM, but no luck.
If there is a way I can install this without this error message or by somehow getting the path to the .ISO that'd be perfect.

Hi,
According to your description, I would like to confirm if you have unchecked the Express installation box.
Be sure to uncheck 'Express Installation' when installing, otherwise Windows setup will fail with an error "cannot find license terms" and get stuck in a reboot cycle.
I suggest you refer to the following link to use Parallels Desktop to install Windows 8.1.
Using Parallels Desktop to install Windows and the dev tools on your Mac:
http://msdn.microsoft.com/en-us/library/windows/apps/jj945424.aspx
Regards,
Kelvin hsu
TechNet Community Support

HT1222 I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

Hi,
I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?

Click here and follow the instructions.
(99025)

Cannot export video: AME cannot read from source, Installation Error

Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked.
I cannot export anything from Premier Pro using Media Encoder. When I try, I get an yellow warning sign saying that it cannot read from the source, and when I close out of it I get a message saying that there is an installation error and that I need to make sure it is installed correctly. I have uninstalled and re-installed ALL of my Adobe products about three times this past weekend trying to fix it and nothing has worked. I have tried making sure that there are no blank spaces in my project, I have named it several different things, I have moved it from my external drive to my main drive, to a different external drive, etc.
I am using a Macbook Pro with Snow Leopard, all of my software has been updated, and I am very frustrated.
Help?

Bummer!
Well, it was worth a shot, as externals/network drives have been known to cause similar.
Now, there were issues with Encore and Snow Leopard, but I do not recall all of the details, as I am a PC-guy, and have to admit that first I do not know squat about Macs, and probably do not read Mac threads as closely, as I should. Seems that Apple was working on an update to Snow Leopard, and again from recollection, it seems that that update helped several on the Encore forum. Have you updated Snow Leopard?
Sorry to just sit here guessing, and probably wasting valuable time for you, but until a Mac-user with the "fix" comes along, the PC-community will try to help. Be patient with us though. Our intentions are good ones, but our expertise is lacking - at least in MY case.
Good luck,
Hunt

Installation of Firefox failing with a 7-Zip Error Box stating "The System Cannot find the File Specified"

When I upgraded to the latest Firefox on my Windows 7 PC , I get a 7-Zip Error Box stating " The System cannot find the file specified". This happens approximately two thirds into the installation. I have tried turning the Virus checker off and re-installing, but to no avail.

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Try this:
*Download the full Firefox installer and save the file to the desktop https://www.mozilla.org/en-US/firefox/all/
*Start the installation with a double-click on the desktop icon
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Installation error: cannot find the data source checking utility (dbcheck)

BO XI 3.0:
During the process of installing "Dashboard and Analytics Servers", we've got this error.
Installation error: cannot find the data source checking utility (dbcheck)
Have anyone encountered this issue? We can't move on after this error.
Thanks,

I've fixed the problem.
Lianjun.
Lianjun (guest) wrote:
: I've tried to run the latest beta version of OMWB to migrate
from
: MS SQLSERVER7.0 to Oracle8i. At step 4:Source Database Details,
: every time I put in the data source name (which is in the
control
: panel-ODBC data source Administrator), it gave an error message
: that Data source name not found and no default driver
: specified).Anybody has any ideas?
: Thanks for the help!
: Lianjun.
null

I get an error stating cc cookies dir: cannot make folder / cookies: Permission denied (error 13) when I attempted to download the creative cloud installer on my Mac. Can anyone help with similar pop up window?

I get an error stating cc cookies dir: cannot make folder / cookies: Permission denied (error 13) when I attempted to download the creative cloud installer on my Mac. Can anyone help with similar pop up window? I'm trying to get a trial version of CS5.

You do not need to involve Creative Cloud to install/try the trial version of CS5...
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

I cannot install the latest version of iTunes on laptop (windows xp). I receive a windows installer error message. Not having any issues installing any other software. Was having no issue syncing w iPhone. Made the mistake of uninstalling prior version.

I cannot install the latest version of iTunes on my laptop (windows xp). I receive a windows installer error. Am not having any problem installing other software or syncing w iPhone. Made the mistake today of uninstalling my older version and not cannot install new. Need new version in order to sync w new iPad.
Any help would be appreciated.

Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

I need help getting past the installation error "windows cannot fint TEMP file"

I need help getting past the installation error "windows cannot find TEMP file"

Seems like some who have tried two devices on the JMICRON IDE port have had trouble. Try without the hard drive and see if you get that error. If that is the case I would try a PATA to SATA converter for your hard drive and connect it to one of the Intel SATA Ports.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812107112
http://www.amazon.com/ADDONICS-IDE-SERIAL-CONVERTER-ADIDESA/dp/B000090169
http://www.compusa.com/products/product_info.asp?product_code=339900#ts
http://www.xpcgear.com/ide2sata.html
http://www.ubuyitdirect.com/-p-1045.html?currency=USD
http://www.satasite.com/sata-ide-converter.htm
http://www.pcgears.com/default.aspx?oid=187150

I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software creator.

I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software manufacturer.

I am using a copy of a previous download of Acrobat XI, clicking the .dmg and then on the install package.
Originally, the Acrobat software was brought into the new computer by the Migration Assistant.
Does the install assistant need to be in the mix somewhere?

Installation Error: Cannot Install Photoshop

I get the following error when I attempt to install Adobe Photoshop CS4.
Installation Error
Installation of the following products has failed:
Adobe Bridge CS4
Adobe Photoshop CS4
To continue installing the remaining options, click continue.
To cancel this installation, click cancel.
I can't figure out why it won't let me install it.
My 32 bit box is running Vista Home Premium with 2 gig of ram and and a dual core processor, at 1.7 GHz each. I also am having trouble with Dreamweaver. I installed it but it gives me an error stating 'Licensing for this product has stopped working'. Error: 147:20. How do I fix that? I'm just trying to install the trial...

Okay I got it to install but I am getting this message about not having having VersionCue.DLL installed. I don't have it in the directory it's specifying, but I can't seem to find it online either. If can run my adobe programs just fine, but when I try to go to like my ITunes or My Downloads, it gives me this message.
Any ideas how I can fix it? I really don't want to uninstall everything. I have already done that so many times. I read an article written by Adobe that said essentially they don't know what the crap is goin on. Which I found real reassuring.

Cannot Install Dreamweaver. Adobe Installer Error Code: 87

I just purchased my Creative Cloud membership. When I go to install Dreamweaver, an Adobe Installer error box pops up saying,
"We've encountered the following issues: Another installer is currently running, which must be closed before installing this product. Please close other installers. (Error code: 87)."
However, I don't have any other installations running. Please let me know if anyone knows something that may resolve the issue.
Thanks,

Moving your post to the Creative Cloud Download and Install forum. The experts here are better placed to help you.

Installation error 1607: InstallSheet Scripting Runtime cannot be insalled

Similar Messages

Maybe you are looking for