Installation Error help

ERROR:  Third party payload installer vcredist>x64.exe failed with exit code: -2147024546
ERROR:  Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64).  Please try installing it by double clicking on the executable.
Help.

Third party payload installer vcredist_x64.exe failed with exit code: 2147942750

Similar Messages

  • Driver Installation Error, help need

    Hi all,
    I just downloaded the newest drivers for my Soundblaster Audigy ZS 2, WinVista 32 bit.
    When I try to install, everything goes fine till an error occured (see screen)
    Screen: http://img5.imageshack.us/img5/660/errordj0.jpg
    Something with the APOIM installer, any help would greatly be appreciated. I already searched the FAQ and known issues etc.
    Thx in advance, xGj.

    Hey I had that same error but?I resolved it.. First download winrar, www.rarlabs.com, second install it and then right click that exe for your driver and click on extract all to that specific folder, for vista the default is downloads, and then just extract and run the setup.exe in that folder and not from the program that you have downloaded from the creative driver website. Worked for me it should work for ya also, Good Luck...

  • Build installer error, help

    Hi all,
    There's a problem need your help.
    I have a LV8.5 PDS. And I create a exe, when I want to create a installer, I cannot found any information is "additional installer". When I try to build it, error reports as below.
    error information:
    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_PreBuild.vi >> CDK_Validate_DistParts.vi >> CDK_DistParts_GetInstalledProducts.vi >> NI_MDF.lvlib:MDFProdInfoList_Open.vi
    Before I reinstall my notebook, it worked.
    Thanks ahead.

    From the forum
    The build specification for your installer may have been corrupted. Try the following to correct this:
    Open up your project in the Project Explorer window and expand the Build Specifications tree.
    Right-click all of the applications (executables) build specifications that are included in your installer and select Build to force each one to rebuild.
    If all the executables build successfully, next right-click your installer's build specification and select Properties to change its configuration.
    In the Category pane on the left, navigate to the Source Files category.
    Find your executable (.exe) files on the right side and click it to select it. Press the Delete key or click the red X at the bottom of the window to remove the executable and its associated files from the build.
    Re-add the executable and its files to the same folder by selecting the executable in the Project View pane and the proper folder in the Destination View pane (on Windows systems, this is typically ProgramFilesFolder\[your product name]), and clicking the blue arrow button in the middle of the window.
    Repeat steps 5 and 6 for any other executables you have in your installer, as well as for any other files which show up in the ProgramFilesFolder path.
    Your installer should now build successfully. If that does not work, try making a new installer build specification which has all of the same settings as the build specification which does not work. If the new installer builds properly, you can keep it and delete the old, corrupted specification.

  • Tiger installation error - help please

    Can anyone give me any advice?
    Trying to install Tiger, get through the DVD test and disk verifying, and then get this error message
    "There were errors installing the software please try again"
    (which of course i have with no luck)
    - i've updated firmware
    - run disk utilty and cocktail
    - removed all peripherals
    - Have plenty of harddrive space
    I read on the apple support pages this may be a RAM issue. I have 512MB internal RAM which was a replacement for a corrupt card, (done about six months ago and been fine), and 512MB added in the slot. I've removed the 512 in the slot and tried to reinstall Tiger with the same result.
    Does anyone have any ideas? Is it possible to turn off the internal RAM and just run off the slot card?
    Appreciate any help

    Here's a long discussion about the -9972 error. It can be pretty serious, so take the time to explore the solution options that are outlined. If all fails be sure to backup if you can, then erase the drive and reinstall.
    The following was contributed by Fumiaki Kawashima.
    The error message, "Error: The underlying task reported failure on exit (-9972)" is a serious filesystem error in the Mac OS X Core Foundation. The problem can also lead to other critical errors such as "Keys Out of Order," "Invalid node structure" and/or "Invalid sibling link." The causes and scenarios vary. Troubleshooting a solution may depend upon computer configuration and whether the -9972 error is accompanied by other critical errors. This issue can also lead up to a kernel panic. If the error occurs when an external FireWire device is connected, disconnect it until you verify the device's compatibility.
    Symptoms:
    In most cases, you are unable to restart from Mac OS X.
    * A volume is grayed out or not mounted with or without a kernel panic.
    * A folder with a flashing question mark may appear.
    * A bad partition map may be reported.
    * A target disk mode solution may not work.
    * Most likely, Disk Utility, Norton Utilities, TechTool and DiskWarrior cannot fix the issues.
    * The high level disk format (Standard format) may unable to perform.
    * You may unable to re-initialize the hard drive.
    * A disk physically malfunctions in the worst case.
    Example of an accompanied error message:
    DiskWarrior normally fixes 1 to 6, but cannot fix errors 7 to 10 if the symptoms are very bad. There is no definite case.
    01. Volume check failed
    02. Invalid B-tree Header
    03. Invalid map node
    04. Invalid extents entry
    05. Invalid clump size
    06. Incorrect block count file
    07. Invalid node structure
    08. Overlapped extent allocation
    09. Keys Out of Order
    10. Invalid sibling link
    Related documents:
    What to Do When It Finds an Error
    Technical overview of disk volume structures
    Possible causes:
    * Third-party FireWire device or enclosure, or other peripheral devices.
    * Third-party mass storage drives or PCI card issues.
    * Incompatible third-party kernel extensions.
    * Mac OS X installer disc is improperly treated.
    Solutions:
    If possible and needed, back up data before troubleshooting. Methods (4) and (5) are for Power Mac desktop computers other than G5 models. The best bet is method (4) if you encounter multiple bad errors.
    1. Unplug the power cord. Disconnect all third-party hardware except Apple keyboard and mouse before you start.
    2. Do NOT re-install any third-party software/hardware until you completely solve the issue(s) and carefully investigate the compatibility with Mac OS X 10.3.x you install.
    3. If another critical error "Invalid sibling link" is detected at any phases, disconnect and reconnect all internal power cords and data cables for hard drives and any ATAPI device. To do so, you may need to read the computer's CIP Instructions in advance. Normally, you do not need to remove third-party RAMs.
    Method 1:
    (1) Start up from Mac OS X 10.3.x Panther Full Install CD or DVD.
    (2) Re-initialize and re-partition the hard drive. RECOMMENDATION: Select "Zero all data" option if "Invalid node structure" or "Keys Out of Order" error is detected.
    If this method is of avail, go to Method 2 or greater.
    Method 2:
    (1) Start up in Mac OS 9.2.2 and shut down the computer.
    (2) Start up from a copy of a Disk Warrior bootable CD for Mac OS 9.2.2.
    (3) Run DW to fix the damage(s).
    Method 3:
    (1) Unplug the computer.
    (2) Find a second ATA drive and jumper it as MASTER. Jumper the hard drive in question as SLAVE. Verify the jumper pin settings.
    (3) Install Mac OS 9.2.x system on the MASTER drive, and update it to Mac OS 9.2.2.
    (4) Start up from Mac OS 9.2.2. Re-initialize and re-partition the damaged hard drive with Drive Setup using the "Zero all data" option. Unplug the computer and reconfigure the jumper pin setting on the repaired drive for MASTER and the second drive for SLAVE.
    (5) Restart from Mac OS X 10.3 Panther full install CD. Re-initialize and re-partition the repaired drive to install Mac OS X 10.3. Update to Mac OS X 10.3.7 via Software Update. Repair the disk permissions after each Mac OS X 10.3 installation and Mac OS X 10.3.7 update.
    You may want to try starting up from Mac OS 9.2.x Full Install CD instead of from (2) to (4).
    Method 4:
    (1) Find a desktop computer that has an ATA controller PCI card (SCSI environment) and has two hard drive bays. This will make your damaged drive appear as a quasi-SCSI hard drive. Mac OS 9.2.2 must be pre-installed on the computer. I recommend a host computer that installs an Ultra DMA/xxx or xxx (ATA-x) interface equal to or better than the damaged drive with backwards compatible.
    (2) Set the host computer's primary drive as MASTER and your damaged hard drive as SLAVE and install the damaged drive in the second drive bay of the host computer. Verify properly configured jumper pin settings in advance.
    (3) Start up the host computer from Mac OS 9.2.2. Launch the "Drive Setup" utility. Re-initialize the damaged disk on the second drive using the "Low level format" option. It may take hours but less than "Zero all data" option. Note: Normally, a low level format with a quasi-SCSI drive takes much less (30 - 40%) time than an ATA configuration drive. Note that "Low level format" fixes all difficult logical damage.
    (4) Put the fixed disk back in your computer's drive bay. Re-configure the jumper pin setting to MASTER before you place it into the drive bay of your computer.
    (5) Restart from Mac OS X 10.3 Panther full install CD. Re-initialize and re-partition it to install Mac OS X 10.3. Update to Mac OS X 10.3.7 via Software Update. Repair the disk permissions after each Mac OS X 10.3 installation and Mac OS X 10.3.7 update.
    Note that Panther's Disk Utility does not implement a "Low level format" option.
    Method 5:
    If Method 4 does not work or fix the damaged drive, let me know. You may need an advanced technique to fix it if the drive is physically not a problem.
    OPTION:
    Purchase a known good hard drive that conforms to your computer's ATA specification. Fix the damaged hard drive some other time. Nowadays, prices of hard drives are inexpensive.

  • Envy 5640 - Windows Vista Driver Installation Error - Please Help

    Hi
    Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
    The printer is up and running and working perfectly on our iOS and OSX Mac devices.
    The PC can see and communicate with the Printer.
    But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
    <<
    Install Failed
    The software required for your printer could not be installed.
    For more information click the Details button below.
    DETAILS...
    The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
    >>
    Then when DETAILS... button pressed:
    <<
    Installation Error
    Key not valid for use is specified state.
    >>
    I haven't entered a key, nor a state? I'm in the UK.
    Any ideas?
    Thanks in advance
    Dave

    Hello there! Welcome to the forums @Stodgy70 
    I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
    After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
    Here is the direct link for you to download and install the printer on Windows Vista:
    HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
    Please let me know the results, have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.4053",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer to Help and Support for more info

    I have been receiving this error trying to install SQL Server 2012. Initially I already had SQL Server 2012 on my machine and attempted to install BIDS 2008. My IT guy stated that there was a conflict in the installation and suggested that I uninstall SQL
    Server 2012 and then attempt to install 2008 BIDs again. Fail. I got a similar error as I pasted below. Giving up on having 2008 BIDS I've been trying to reinstall 2012 SQL Server but am getting this message below.
    The links provided by this message are no help at all (For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401)
    I've attempted to repair my .NET framework, didn't help.
    I've followed the steps in these threads (http://support.microsoft.com/kb/2688946), (https://support.microsoft.com/kb/957310?wa=wsignin1.0) and (https://social.msdn.microsoft.com/Forums/en-US/beeceb19-69cc-4044-94f0-591feec04626/an-error-occurred-during-the-installation-of-assembly-microsoftvc80crt-public-key),
    neither one fixed the error.
    Any help? Anyone else run into this error? What should I do?
    TITLE: Microsoft SQL Server 2012  Setup
    The following error has occurred:
    An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="e03584ff-5e55-4073-ac2e-d3e07379c0ae">,</gs>version="8.0.50727.4053"<gs
    class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="20b968d8-03a3-4284-bffc-0cc1a90d2aac">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
    ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="9b86ea8f-9852-4110-a616-a1e085d740c6">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8"
    id="f52b7568-d5e6-4099-a8ee-ebc11fbf4acc">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712. 
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK
    TITLE: Microsoft SQL Server 2012  Setup
    The following error has occurred:
    SQL Server Setup has encountered an error when running a Windows Installer file.
    Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="297b0922-8852-404d-9dc1-a9b38415a2e5">,</gs>version="8.0.50727.4053"<gs
    class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="785a0f51-5ed5-41ee-97a8-8fc31122e2ae">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
    ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="8aa968bd-ff25-4e9d-9109-a219a98ee5e8">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3"
    id="aa9e7ba2-4f5a-4d89-bf64-dcff0714afaa">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712. 
    Windows Installer file: c:\2f4e5903553a88acc6726f538e140c4d\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
    Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150213_150637\SqlSupport_Cpu64_1_ComponentUpdate.log
    Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325
    BUTTONS:
    &Retry
    Cancel

    Hi Gurmo,
    HRESULT: 0x80073712 means ERROR_SXS_COMPONENT_STORE_CORRUPT, and it is one of the error codes listed at this
    KB article.
    I suggest you run the System Update Readiness tool and check if the error still persists.
    There is a similar thread for your reference.
    https://social.technet.microsoft.com/Forums/en-US/0b3d0479-b9c0-4551-a623-1519ce7584af/error-when-installing-sql-server-2008-r2-rtm-on-windows-server-2008-r2-foundation?forum=winservergen
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Help plzz in Enterprise installation errors

    hey guys ,everything i install the enterprise i got this after it finshed installation can anyone plz tell me what does this mean am new in java
    also there is somethin worng wen creating web apps prj as there is no design page found and the page template is not found on the IDE plzzzzzzzz help me guys
    com.sun.tools.ide.installer.actions.ConfigureApplicationServer, err, An error occurred and product installation failed. Look at the log file d:\Program Files\Sun\jstudio_ent81\installation-errors-log.txt for details.
    (Aug 15, 2007 12:39:09 AM), Install, com.sun.tools.ide.installer.actions.ConfigureApplicationServer, err, java.lang.OutOfMemoryError: Java heap space
    STACK_TRACE: 2
    java.lang.OutOfMemoryError: Java heap space

    Can you please take a look at the following posts and see if they help?
    http://forum.java.sun.com/thread.jspa?threadID=5167342
    ... This error seems to happen when installing using jdk1.6. An alternative is to use jdk1.5 for install and then modify ide and server startup scripts later to run them under jdk1.6...
    http://forum.java.sun.com/thread.jspa?threadID=5153964&tstart=75

  • After installing Trend Macro antivirus, I was unable to install any plugins. I get an "Unexpected Installation Error" message at the end of the installation. Closing the anti-virus does not help.

    I have purchased Trend Micro Titanium Maximum Security and am now unable to install any plugins. I have had these plugins before and had no trouble with them but now they have disappeared. I tried closing the antivirus and added mozilla.org to the exceptions list but it did not help.
    I have copied the text of the error.
    Firefox could not install the file at
    https://addons.mozilla.org/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=search
    because: Unexpected installation error
    Review the Error Console log for more details.
    -203

    http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203

  • Hello , I'm having failed the Creative Cloud Desktop installation ( error code 1 ) . can you help me?

    Hello , I'm having failed the Creative Cloud Desktop installation ( error code 1 ) . can you help me?

    Error: "Failed to install" | Creative Cloud Desktop

  • Post Installation Errors in loading ORacle R12 on windows vista!!! HElp!!!!

    Hi,
    I got all errors in the Post installation checks when loading ORacleR12 E business suite on vista.
    Acutally during installation steps, at step 1 ..at around 30 of 147, the installation stopped quoting an error like unzip file not found or cant be opened....i dont clearly remember but the step 1 was not completedly fully..
    THen it skipped to step 2,3 and I think the same happened in step 4 too. There was an error and it skipped some install files i think.
    How do I Load the s/w correctly or now how do I solve is errors now?
    PLEASE HELP! I Am novice to APPS so give me a detailed answer please...like the directories to look for and the paths and solutions too...
    Await an answer for the GURUS and EXPERTS!!!
    Regards,
    indira meduri
    Edited by: user529846 on Jan 18, 2010 11:13 PM

    Hi,
    Below are the errors i got in Post installation checks...! Can you help?
    Database Availability
    command: /home/Oracle/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env APPS/APPS
    riwTDBup.sh started at Wed Jan 20 05:36:52 CST 2010
    Parameters passed are : /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env APPS/APPS
    Cannot find environment file /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env
    RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 1 command: /home/Oracle/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env APPS/APPS
    riwTDBup.sh started at Wed Jan 20 05:36:53 CST 2010
    Parameters passed are : /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env APPS/APPS
    Cannot find environment file /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env
    RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
    Configuration Upload
    uploading config file at /tmp/01200535/conf_PROD.txt
    Failed upload of config file at /tmp/01200535/conf_PROD.txt
    Environment File
    RW-50016: Error: - Database ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/db/tech_st/11.1.0/PROD_linux.env RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.3/PROD_linux.env RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/ora/10.1.2/PROD_linux.env RW-50016: Error: - APPL_TOP environment file was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/PROD_linux.env RW-50016: Error: - ADOVARS environment file was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/admin/adovars.env RW-50016: Error: - APPSCONFIG was not created:
    File = /home/Oracle/PROD/apps/apps_st/appl/admin/adconfig.txt
    DBC File
    RW-00023: Error: - DBC file was not created:
    File = /home/Oracle/PROD/inst/apps/PROD_linux/appl/fnd/12.0.0/secure/PROD.dbc
    HTTP
    checking URL = http://linux.server:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://linux.server:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://linux.server:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

  • I need help getting past the installation error "windows cannot fint TEMP file"

    I need help getting past the installation error "windows cannot find TEMP file"

    Seems like some who have tried two devices on the JMICRON IDE port have had trouble. Try without the hard drive and see if you get that error. If that is the case I would try a PATA to SATA converter for your hard drive and connect it to one of the Intel SATA Ports.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812107112
    http://www.amazon.com/ADDONICS-IDE-SERIAL-CONVERTER-ADIDESA/dp/B000090169
    http://www.compusa.com/products/product_info.asp?product_code=339900#ts
    http://www.xpcgear.com/ide2sata.html
    http://www.ubuyitdirect.com/-p-1045.html?currency=USD
    http://www.satasite.com/sata-ide-converter.htm
    http://www.pcgears.com/default.aspx?oid=187150
     

  • "An unknown installation error occurred" need help!!!

    hey guys so i just recently restored my whole MBP. I ran the original disc, went into Disk Utilities, erased my HDD, installed OSX (10.6.8) and then ran the software updater. Everything is up to date. My only problem is that when i run the disc that came with all the bundled applications, it gives me this error "An unknown installation error occurred." I don't know whats going on and could use some help!
    Much is appreciated!!

    OK I have the scenario:
    Thinkpad printing fine in den, not docked, using a wired / cable network connect etc..
    1) Suspend machine, walk into office
    2) Cold dock it with docking station with machine suspended
    3) Unsuspend machine
    4) Surf, need to print an invoice
    5) Attempt to Print to normal network printer --> no
    Attempted to print to Snagit virtual printer --> no
    Attempted to print to Quicken vPrinter --> no
    Attempted to print to 2nd network printer --> no
    6) Can I open any defined Printer Properties pages in FF or TB --> no
    7) "An error occurred while printing..." from FF 27.0.1
    8) From TB 24.0, no error message, the print dialog opens and when I select print, the dialog box disappears like it's going to print and then no printouts.. and I do not get "An error occurred while printing.."
    8) Time to reboot..
    Something is not getting reinitialized properly. I keep all my stuff current and ever since version FF 27.0 and TB 24.x no dice. Im current at FF 27.0.1 and TB 24.3.0. Thanks.

  • Help with Installation Error

    Hi, I have just pruchased Premiere Pro CS6 box set ans during installation an error box appeared. It is rather long and will write it out as it came. Please forgive the length.
    Exit Code 6.
    Please see Specific errors and warnings below for troubleshooting. For example, ERROR: DB001, DW050 ... WARNING: DF029...
    Summary
    - 2 fatal error(s), 1 error(s), 1 warning(s)
    -----Payload: (CFA46C39-C539-4BE9-9364-495003C714AD) Adobe Switchboard 2.0 2.0.0.0------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped Switchboard. Current State: 0 Exit code: 0 Service Specif
    ----Payload: (36682D68-3834-487E-BA49-DFA4AB0A2E32) Adobe CSXS Infrastructure CS6 3.0.0.0--------
    FATAL: DB001: Database file 'Instal.db' does not exist.
    FATAL: DB001: Database file 'Instal.db' does not exist.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Adobe CSXS Infrastructure CS6: Instal failed
    That is the error report which was generated, can anyone help please. I am new to Adobe products, I have just changed over from using Sony video products due to the many problems associated with it and I was told Adobe was much better. I just need to get it to work properly so I can find out how good it is.
    Any help would be greatly appreciated.
    Regards Stewart

    See if the following help file helps:
    Exit Code: 6, Exit Code: 7 Installation Errors -
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • Errors During sap 4.7 installation-kindly help

    Hi friends,
    I am getting  3 errors during sap 4.7 installation.kindly help.
    i herewwith giving the error details:-
    1. R/3 Basis System Initialization DB-Connect Failed, Return code 000256
    2. R/3 Basis System: operating system call   Recv failed error no. 10054
    3. R/3 Basis System: Database connection Disconnected.
    After i have strated the sap server(MMC) first it will goto yellow and then green and againg goes to yellow color. message and dispatcher turned to gray.
    Pls help.your advise is considered very useful
    Thanks and Regards,
    willaim

    William
    What OS are you using please? (Windows I assume) On the surface, it sounds like a socket error. (i.e. the message server port is blocked by an existing application).
    The dispatcher will fail as a result of the message server not being available. Would you check and post the contents of the 'dev_ms" file in the work directory? Also, contents of the dev_disp would be helpful here also.
    Thanks,
    Tim

  • Help application update - fix for installation error

    Some users are reporting installation errors when updating the Help application update -- if you are experiencing a similar issue, please follow these instructions:
    Uninstall the previous version of Adobe Help
    Windows:  use the Add or remove Programs utitlity
    Macintosh: Remove and trash the application from the Applications > Adobe folder
    Delete the following directory: 
    Windows: %appdata%/chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1
    Macintosh:USER NAME (home) > Library > Preferences > chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1
    IMPORTANT: Empty the Trash or Recycling Band to ensure proper removal of all files
    Manually update the application at: http://www.adobe.com/support/chc/
    The above solution is also available as Technical Support document here: http://kb2.adobe.com/cps/842/cpsid_84215.html

    Okay so I followed the steps outlined above (and in the tech doc)., and when I go to manually install Air I get the following message:
    "Sorry, an error has occurred.  This application cannot be installed because this installer has been misconfigured. Please contact the application author for assistance."
    Now what?  I'm on a Mac, OS 10.5.8.
    Pete

Maybe you are looking for