Installation error in JCE policy

I am getting an error while installing NW 2004s SR1 while giving JCE policy path.
Java version:j2sdk1.4.2_13
Error is:
ERROR 2007-12-12 15:02:55
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
ERROR 2007-12-12 15:02:55
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\McAfeeFramework' does not exist on the 'localhost' host.
Pls help out of this problem

Hello,
I am having trouble installing
SAP NetWeaver 2004s Java Trial Version (SP9)
I get to the screen JCE unlimited strength jurisdiction policy archive,
then I put the file C:\jce_policy-1_4_2\jce.
It gives me error. It says the file does not exist.
I downloaded the above file from sun web site, "http://java.sun.com/j2se/1.4.2/download.html".
Can anyone help?
The above file C:\jce_policy-1_4_2\jce\ contains
local_policy.jar and US_export_policy.jar.
Am I doing the right thing? Can anyone help?
Thanks,
Ajay Dharia

Similar Messages

Installation error in EP EHP1 NW

Dear experts,
I am installing EP EHP1.While installing the phase " create secure store " getting an error .
WARNING[E] 2009-10-07 05:40:26.345
           CJSlibModule::writeError_impl()
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file Secu
reStoreCreate.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:88)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:61)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81
Caused by: java.lang.ExceptionInInitializerError
        at java.lang.J9VMInternals.initialize(J9VMInternals.java:218)
        at javax.crypto.Cipher.a(Unknown Source)
        at javax.crypto.Cipher.getInstance(Unknown Source)
        at iaik.security.provider.IAIK.a(Unknown Source)
        at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source)
        at iaik.security.provider.IAIK.addAsJDK14Provider(Unknown Source)
        at com.sap.security.core.server.secstorefs.Crypt.<clinit>(Crypt.java:82)
        at java.lang.J9VMInternals.initializeImpl(Native Method)
        at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
        at com.sap.security.core.server.secstorefs.SecStoreFS.setSID(SecStoreFS.
java:158)
        at com.sap.security.core.server.secstorefs.SecStoreFS.handleCreate(SecSt
oreFS.java:804)
        at com.sap.security.core.server.secstorefs.SecStoreFS.main(SecStoreFS.ja
va:1274)
        ... 6 more
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
        at javax.crypto.b.<clinit>(Unknown Source)
        at java.lang.J9VMInternals.initializeImpl(Native Method)
        at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
        ... 17 more
Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed
by trusted signers!
        at javax.crypto.b.a(Unknown Source)
        at javax.crypto.b.a(Unknown Source)
        at javax.crypto.b.access$600(Unknown Source)
        at javax.crypto.b$0.run(Unknown Source)
        at java.security.AccessController.doPrivileged(AccessController.java:246
        ... 20 more.
ERROR      2009-10-07 05:40:26.607 [sixxcstepexecute.cpp:950]
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|
Kindly guide me please.
Regards,
kiruba.

by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers! at javax.crypto.b.
There seems to be a problem with the JCE policy file that you provided during installation.
Kindly download it again.
Then find the current policy file on the installation server and replace it.
Then retry the current installation.
OR
Start SAPinst again and start a new installation

Oracle service registry installation error

I am getting installation error while trying to install Oracle Service Registry 11.1.1 on weblogic 11g....
any suggestion.
oracle.database.user=uddiuser
install.windows.menu=Oracle Service Registry 11.1.1
oracle.database.password=***
[java] BUILD FAILED
[java] C:\oracle\middleware\registry111\etc\setup\porting.xml:412: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\porting.xml:350: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:196: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:202: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-runner.xml:208: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-ear.xml:257: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\conf\porting\build-ear.xml:1031: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\setupserver.xml:788: The following error occurred while executing this line:
[java] C:\oracle\middleware\registry111\etc\setup\setupserver.xml:774: Java returned: 1
[java] Total time: 3 minutes 22 seconds
Java returned: 1
Installation failed. If accessible, see "C:\oracle\middleware\registry111\log\install.log".
To correct installation parameters and resume installation click Recovery.
.

I have used the oracle's OSR installation guide. I beg to differ if OSR is really enterprise ready product.
I dont think this is a specific problem with my installation. The point is that the installation logs is very poor to put it mildly.
you get a sense that this product is developed by school student and is not an enterprise ready software.
WebLogic Server Version: 10.3.4.0
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;;
C:\Oracle\MIDDLE~1\ORACLE~2\lib\osb-server-modules-ref.jar;C:\Oracle\MIDDLE~1\pa
tch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle
\MIDDLE~1\patch_oepe1040\profiles\default\sys_manifest_classpath\weblogic_patch.
jar;C:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sys_manifest_classpath\webl
ogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSE
RV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblo
gic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.4.0.jar
;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\mod
ules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-
contrib.jar;C:\Oracle\Middleware\Oracle_OSB1\soa\modules\oracle.soa.common.adapt
ers_11.1.1\oracle.soa.common.adapters.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\or
acle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\ORACLE~2\lib\version.jar;C:\Oracle\MI
DDLE~1\ORACLE~2\lib\alsb.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j2ssh-ant.
jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j2ssh-common.jar;C:\Oracle\MIDDLE~1
\ORACLE~2\3rdparty\lib\j2ssh-core.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\lib\j
2ssh-dameon.jar;C:\Oracle\MIDDLE~1\ORACLE~2\3rdparty\classes;C:\Oracle\MIDDLE~1\
ORACLE~2\lib\external\log4j_1.2.8.jar;C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D
~1\config\osb;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\
Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;.;C:\Program Files\Java\jre6\lib\
ext\QTJava.zip;C:\Program Files\Rational\ClearQuest\cqjni.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\native;C:\Oracle\MIDDLE~1
\patch_oepe1040\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp360\profiles
\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MID
DLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\
MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\oraclexe\app\oracle
\product\10.2.0\server\bin;C:\Program Files\Java\jdk1.6.0_24\bin;C:\progra~1\ora
cle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\
1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Fil
es\QuickTime\QTSystem\;C:\Program Files\Rational\common;C:\Program Files\Rationa
l\ClearCase\bin;C:\Program Files\Cepstral\bin;C:\apache-maven-2.0.11\bin;C:\apac
he-ant-1.8.2\bin;C:\Program Files\Enterprise Vault\EVClient\;C:\Oracle\MIDDLE~1\
WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
Listening for transport dt_socket at address: 8453
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b51)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transpo
rt=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx
512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogi
c.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\l
ib\weblogic.policy -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea..
. -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:co
m.bea.sbconsole... -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\O
racle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\s
erver -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1
-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -D
domain.home=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1 -Djrockit.optfile=C:\Or
acle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.se
rver.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\ser
vers\AdminServer -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\
BASE_D~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\USER_P~1
\domains\BASE_D~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE
~1\USER_P~1\domains\BASE_D~1\config\FMWCON~1\arisidprovider -Doracle.security.jp
s.config=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\config\fmwconfig\jps-confi
g.xml -Doracle.deployed.app.dir=C:\Oracle\MIDDLE~1\USER_P~1\domains\BASE_D~1\ser
vers\AdminServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateT
ypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracl
e\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pk
gs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.mana
gement.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToCo
nsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1034\profiles\default\sys
ext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe1040\profiles\default\sysext
manifestclasspath;C:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sysext_mani
fest_classpath weblogic.Server
Listening for transport dt_socket at address: 8453
<Apr 14, 2011 10:42:50 AM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ
JCE Provider self-integrity check for better startup performance. To enable thi
s check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Apr 14, 2011 10:42:51 AM CDT> <Info> <Security> <BEA-090906> <Changing the defa
ult Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disabl
e this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Apr 14, 2011 10:42:52 AM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting We
bLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17 from Sun Microsys
tems Inc.>
Let me know if you need more information.
Thanks

Labview 2009 x32 and x64 installation error on windows 7 x64

When attempting to install the evaluation version of labview installed by clicking the try labview for free link on ni.com, I am experiencing an installation error.
the full error is shown in the attachment below, and is as follows;
The NI VC2005MSMs x64 installation has failed with the following error.
Error 1935. An error occured during the installation of assembly 'policy.8.0.Microsoft.VC80.OpenMP, type="win32_policy",version="8.0.50727.762".publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please refer to Help and Support for more information.
processor is an INTEL core 2 duo
running windows 7 x64
The above error occurs with both 32 and 64 bit versions. I belive I have installed this version of labview on this computer before.
Thanks
David
Solved!
Go to Solution.
Attachments:
labview_error.jpg ‏48 KB

Why Does My LabVIEW Installation Fail With Error 1935?
Also see this discussion

Software Installation Processing Alerts - Group Policy Failures?

Hello,
I am getting several errors reported by SCOM Software Installation Processing alert
In the local event log I have:
Warning 9/15/2014 11:09:37 AM GroupPolicy 1112 None
Warning 9/15/2014 11:09:37 AM Application Management Group Policy 108 None
Error 9/15/2014 11:09:37 AM Application Management Group Policy 103 None
Warning 9/15/2014 11:09:37 AM Application Management Group Policy 101 None
with the details:
101 - The assignment of application SMS Client Setup Bootstrap from policy MITS Servers Software failed. The error was : %%1274
103 - The removal of the assignment of application SMS Client Setup Bootstrap from policy MITS Servers Software failed. The error was : %%2
108 - Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %%1274
1112 - The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance.
- Computer Configuration > Policies > Administrative Templates > System > Group Policy > Policy > Startup policy processing is enabled
what does exactly this means?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hi,
Yes the packaged is installed.
Troubleshooting the issue deeper with http://support.microsoft.com/kb/249621/en-us is showing
Software installation extension has been called for background policy refresh
09-16 06:34:09:346
Software installation extension has been called for background policy refresh
The following policies are to be applied, flags are 11.
MITS Servers Software (unique identifier {E76FB561-E177-421D-AE43-109EADEAD751})
System volume path = \\ad.medctr.ucla.edu\sysvol\ad.medctr.ucla.edu\Policies\{E76FB561-E177-421D-AE43-109EADEAD751}\Machine
Active Directory path = LDAP://CN=Machine,cn={E76FB561-E177-421D-AE43-109EADEAD751},cn=policies,cn=system,DC=ad,DC=medctr,DC=ucla,DC=edu
Set the Active Directory path to LDAP://CN=Class Store,CN=Machine,cn={E76FB561-E177-421D-AE43-109EADEAD751},cn=policies,cn=system,DC=ad,DC=medctr,DC=ucla,DC=edu;.
Enumerating applications in the Active Directory for computer MSVROFAS2 with flags 5.
The following applications were found in policy MITS Servers Software.
Assigned application SMS Client Setup Bootstrap (flags a0044c70).
Found 1 applications in policy MITS Servers Software.
Enumerating the managed applications which are currently applied to this user.
No managed applications are currently applied to this user.
Found 0 applications locally that are not included in the set of applications from the Active Directory.
Application SMS Client Setup Bootstrap from policy MITS Servers Software is set for installation because it is assigned to this computer policy.
Software installation extension cannot perform removal or install operations during asynchronous policy refresh and will force a synchronous foreground refresh.
The assignment of application SMS Client Setup Bootstrap from policy MITS Servers Software failed. The error was : %1274
Removing application SMS Client Setup Bootstrap from the software installation database.
Calling Windows Installer to remove application advertisement for application SMS Client Setup Bootstrap from script C:\Windows\system32\appmgmt\MACHINE\{ecbf218d-0d04-4b00-a43e-91ba5c41d119}.aas.
Windows Installer cannot remove application advertisement for application SMS Client Setup Bootstrap from script C:\Windows\system32\appmgmt\MACHINE\{ecbf218d-0d04-4b00-a43e-91ba5c41d119}.aas, error 2.
The removal of the assignment of application SMS Client Setup Bootstrap from policy MITS Servers Software failed. The error was : %2
Policy Logging for Software Management is attempting to log application SMS Client Setup Bootstrap from policy MITS Servers Software.
Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %1274
Software installation extension has detected changes that require a synchronous foreground policy refresh.
Software installation extension returning with final error code 1274.
And this is happening hourly !!!
This is the current status...
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

ZENworks Single Server installation error

Hi.
I have a problem during the single server installation.
Let me tell you server status.
Server OS: MS Window server 2003 Enterprise
SQL: MS-SQL 2005 Enterprise edition.
with IIS and Active Directory.
Error message show like this
"Couldn't replace ~DSDATAFOLDER~ with "E:\Program Files\Microsoft SQL
Server\MSSQL.1\MSSQL\DATA" in file Scripts\SQL_PSTOKEN.sql(error code -2)
Would you let me know if you know how to figure out this?

Originally Posted by lanoxox
I have changed the installation procedure that was "distributed setup" in the CD.
There was error during the "Policy Distribution Service". the message is
"The Database STDSDB exists,but the password you entered for user account "DS_STDSDB_USER" is incorrect ,Try another passwor?"
I could not go forward after this. and there was no account for "DS_STDSDB_USER"
in the SQL Server. I think it could not create this account.
Hi, how did you solve this? the TID doesn't solve this error.
Regards.

SCVMM Installation Failed: vmmServer.msi failed with Windows Installer error 1603.

Error seen when attempting to install Microsoft System Center 2012 R2 Virtual Machine Manager
Installing D:\amd64\setup\msi\Server\vmmServer.msi failed with Windows Installer error 1603.
See C:\ProgramData\VMMLogs\vmmServer.log for more information. After resolving the problem, retry setup.
Searched the log file for 1603 errors -
CustomAction EnableWsmanCredSSP returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (B8:20) [02:00:47:180]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (B8:20) [02:00:47:180]: Machine policy value 'DisableRollback' is 0
Action ended 2:00:47: EnableWsmanCredSSP. Return value 3.
SI (s) (B8:20) [02:00:47:228]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Server (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
I've tried disabling my Firewall and troubleshooting the Enable-WSManCredSSP command-let however nothing has worked and I'm quite stuck.
Any help would be appreciated.

I had the same problem in my environment.
Here are the steps how i did solve this issue
Since VMM 2012 R2 Requires ADK 8.1 and this requires SQL 2012 Express.
In order SQL Server 2012 to be installed successfully .Net Frame Work 3.5 feature on Windows Server has to be enabled first, in this case it is not not being installed by ADK Installation wizard as a result SQL service fails to start, which results on VMM
installation to fail.
Please try to enable .Net Frame Work 3.5 feature on Windows Server 2012 R2 before you install ADK 8.1

Differences in JCE policy files between java 1.4 and 1.5?

I'm using a app that needs JCE unlimited strength policy files to start. Attempting to start with limited strength policy files with Java 1.4 installed will give:
java.security.InvalidKeyException: InitVerify error: java.lang.RuntimeException: engineGetKeySize() is not supported by this cipher!
however, running the same app on java 1.5 with limited strength policy files does not give this problem. I've checked http://java.sun.com/j2se/1.5.0/docs/guide/security/jce/JCERefGuide.html#AppE and http://java.sun.com/j2se/1.4.2/docs/guide/security/jce/JCERefGuide.html#AppE and the maximum allowed keysizes are identical. Has something else changed in the JCE policy files between these java versions? Can anyone tell me what's going on?

Incubus wrote:
say I have a code that does:
public void StringConcat(){
int noOfIter = 10000;
for(int i = 0; i < noOfIter; i++){
String s = "String " + i + " Being " + i + "concatenated " + i + "using " + i + "String" + i + "Builder";
If I compile this in 1.4 ( i.e using javac -source 1.4); the decompiled code looks the same.
But if I do so in 1.5 ( i.e if I decompile the same code compiled using javac -source 1.5), this is how it looks:
public void StringConcat(){
int noOfIter = 10000;
for(int i = 0; i < noOfIter; i++){
String s = (new StringBuilder).append("String ").append( i).append( " Being ").append( i).append( "concatenated ").append( i).append( "using ").append( i).append( "String").append( i).append( "Builder").toString();
The above was the compile time optimization I was talking about.What makes you think that the decompiler is not the problem?
The ONLY difference between 1.5 and 1.4 in that case is that one uses StringBuilder and one uses StringBuffer. And StringBuffer is faster.
Just wanted to know, are there any other differences in compile time optimizations between 1.4 and 1.5.I suggest that you go look at the read me. And I also suggest that you become familar with byte codes and stop assuming that a decompiler is going to tell you anything.

Adobe creative cloud installation error 201

adobe creative cloud installation error 201
How to solve this problem?

Install Adobe application manager and try updating to CC desktop application.
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager : Thank You

My iTunes wont update, and I can't connect my new iPhone if it doesn't update. It says error when I try to update, and I cant download it because of a "Windows Installer" error...

I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
Where on earth is Tools anyway?
When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!

tools is at the top of the apple updater but dont get your hopes up

Software Update, 10.6.6 installation error!!

Hi all, hope someone can help.
I have a Mac Pro running 10.6.5. I upgraded to 10.6.5 recently and had problems with this. When using Software Update, it would download, log out and install only to get an error at the end saying it couldn't install, with no explanation of why. I did some investigation and it boiled down to Safari (one of the updates in the list to install along with 10.6.5) wasn't being replaced. I had to delete Safari from my applications folder before updating. I tried rebuilding permissions and even installed from the installers from the apple download page. but until I deleted Safari from my apps folder it would fail every time.
Since I assumed that it was a corrupt copy of safari and all other update went ok I assumed I had fixed the problem.
Now I'm trying to install the update of 10.6.6 via Software Update. and I'm getting the same problems. It downloads, reboots, installs then at the end says that it was not installed because of an error and promps me to restart.
I have downloaded the update and run it from the desktop and it goes through the install as follows:-
Installing
optimizing system
Moving files
installation failed.
It seems that it isn't able to replace existing files on my system with new ones therefore fails the install.
Has anyone got any ideas? I have repaired permissions with disk utility and tried repairing them while booting from the 10.6.3 system disc, still no joy
Many thanks

Worse problem here. I get the installation error then the computer attempts to reboot and I get locked at the gray background apple screen. Tried safe boot power on +SHIFT a status bar comes up and goes 3/4 away across and locks. Running permissions repair from Mac OEM disk set was no help. Had to do a time machine restore. Seems my install error is catastrophic. On the upside time machine works very well.. A bit disappointed with my Windows-esque crash

When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Mark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders

ITunes 12.1.1 installation errors and resolution (Win 7, 64 bit)

I am providing all of the installation errors I had experienced
and all of the methods I had tried until I finally came up with a solution.
Hopefully the details will help you see if your situation has similarities
which hopefully will make this post helpful in terms of a solution.
PART ONE: INSTALLATION ERRORS
I received the following installation errors
when attempting to update to 12.1.1
and later once I uninstalled and attempted to reinstall 12.1.1.
I used this link for the download:
http://www.apple.com/itunes/download/?cid=wwa-us-kwg-music-itu
> itunes 6464setup.exe
I then tried this link:
http://support.apple.com/kb/DL1614
> itunes 12.1.1 64 bit
Again 6464 in the name.
After uninstalling the iunes,
I discovered under add/remove programs:
apple application support 32 bit
and apple support update
I deleted these and restarted the PC.
I then tried reinstalling a NEW version
from the second link above.
Opened download iTunes 6464setup.exe >
Windows installer> iTunes > welcome to itunes
> next > installation options > install > user account control
> yes > next > (error message via pop-up window):
ERROR MESSAGE ONE
"An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32",
version = "8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b"
processorArchitecture ="amd64".
Please refer to Help and Support
for more information.
HRESULT: 0X80070091"
> OK > iTunes > Status: Starting services >
(error message via pop-up window):
ERROR MESSAGE 2
"Service 'Apple Mobile Device Service' (Apple Mobile Device Service)
failed to start. Verify that you have sufficient permission to start system services"
SIDE NOTE
There was a USB cable connected to the PC to charge the iPhone,
but the iPhone was not connected. I detached the USB cable from the PC in case it's relevant.
(I did not reattach the USB cable until I finally got a copy of itunes to install. You will see later in this post below.).
I then clicked Retry.
ERROR MESSAGE 2 AGAIN
I received the identical 'Apple Mobile Device Service' error as above.
I then clicked Ignore.
iTunes > Status
> User Account Control pop-up window)
> Do you want to allow to install Apple iTunes>
Yes >
> Congratulations > Finish
> (iTunes pop-up error window):
> iTunes Helper
ERROR MESSAGE 3
a)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 "
> (iTunes pop-up error window)
> iTunes
b)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2)"
> OK > OK
ERROR MESSAGE 4
I received all of these errors above
when I had tried a fresh install before returning to the forum to search for answers.
When I had first tried a fresh install, I didn't get as far as the Congrats.
I only got as far as the first and second error listed above
("An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32"...
AND Service 'Apple Mobile Device Service' (Apple Mobile Device Service").
Clicked on iTunes icon on desktop
ERROR MESSAGE 5
I receive the (iTunes pop-up error message window)
error 2 windows error 2 (identical to what's listed listed under 3b).
PART 2 - INSTALLATION RESOLUTION
The issue finally is resolved.
HERE IT IS!!!
1) Uninstall iTunes
2) check remaining Apple programs
(click control panel > programs > uninstall)
> check the listed Apple programs
Apple Application Support 32 bit,
Apple Mobile Device Support,
Apple Software Update,
Bonjour
3) Locate and save the correct file version of iTunes for your OS and System.
In my case, it's Win 7.
You must check for the System Type.
Computer > right click to properties > system type.
In my case its 64 bit.
The 32 bit installer is named iTunesSetup.exe,
while the 64 bit installer is named iTunes64Setup.exe.
I learned that some folks had experienced issues with
the 64 bit installer on the Apple site whether it's
because they had downloaded the 32 bit
when they needed the 64 and therefore
couldn't complete the install or in my case,
what appears to perhaps be a corrupted file that stated 6464 in the .exe file name.
This lead me to believe that finding the file with the correct file name and
correct file size to prove it authentic for that version would likely be part of
the solution if not the solution. File Hippo is one suggested means to locate the file.
I locate the iTunes download "iTunes64Setup.exe" that matched the size of the file
to a valid copy of that version of ITunes and I set it aside.
4) I then made sure that all old copies
and remnants of iTunes and Apple software
has been uninstalled by checking add/remove.
Then C: program files
and then C: program files (x86),
then running CC Cleaner,
then cleaning the registry using CC Cleaner
and then checking Tools under CC Cleaner.
***I discovered under Tools that there were remaining Apple files listed
after the uninstall of iTunes and other files had taken place under iTunes***
I visit tools under CC Cleaner and deleted the remaining Apple files
including Apple Application Support, Mobile Device Support, and Bonjour,
***but I leave the Apple Software Update folder as is, in tact***
under C: Program files (x86) and Tools of CC Cleaner and under Add/Remove.
5) I restart the computer, install the new copy of iTunes 12.1.1 (64 bit),
iTunes64Setup.exe, and it installed with zero errors.
Hope someone will find this useful. Good luck.

Try the "for older video cards" version.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR

I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4 and my operating system is windows 8.1.
I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled the HP folders.
Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf (that's the translation from Italian)
I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
thanks in advance fot your help.
denise

Hi @denig,
Welcome to the HP Forums!
I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
Please try the following solutions:
Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).
Clean boot the computer. How to perform a clean boot in Windows.
Make sure no antivirus programs are running. Turn Windows Defender on or off.
Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
Re-install using the HP Printer Install Wizard for Windows.
Hope this helps you resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Installation error in invoking target 'agent nmhs'

Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size          1336624 bytes
Variable Size          922749648 bytes
Database Buffers     553648128 bytes
Redo Buffers          12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-Khaffaf

Hi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13.

Installation error in JCE policy

Similar Messages

Maybe you are looking for