Installation error: "MaxDB Software must be installed before ..."

Dear collegues.
During my installation of the win7 x64 trial version SP7 I get this error:
"An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Error during execution of command identifier 'XSERVER_STOP' : MaxDB Software must be installed before this class can be instantiated!"
The error occurs during step 5: installation of the MaxDB-client.
I've initiated the installation according to the guides, so I would assume that anything needed for each installation step is taken care of by the installation wizard. Thus - I assume I do not need to manually install MaxDB beforehand. Right?
Before installing the SP7 version, I tried with the SP6 version, but got the some problem. I've un-installed both, and I checked the register keys and found no entries here - allthough I'm not 100 % sure where to look.
Anyone with similar experiences?
Thanks,
Jens.
Edited by: sandstroem2 on Aug 6, 2011 8:59 PM
OK - I managed to figure out a solution. It seemed that the problem was caused by an earlier but un-sucessful attempt to install miniWAS. Also I un-installed SAP GUI. After cleaning up in registry keys, delete SAP-related services (even though disabled) and deleting all SAP related files and folders, the installation worked fine.
/Jens.

Hello jens,
I am facing the same issue. i have done all that u suggested..but no success. can you please explain in detail what you did..
Thank you
Akanksha

Similar Messages

Logic Express installation error: no software found to install

Some of my Logic instruments wouldn't load or I would get a file not found message. So I decided to reinstall Logic. Deleted the program and iserted the disk. I go through the installation usual dialogs, location, agreement, password, etc. Then it gives me an error message at the summary:
The installation failed.
The installer could not install the software.
The installer could not install the software because there is no software found to install.
I tried restarting, and reinstalling.
Installing from a different account.
Copying the files to the hardrive (including hidden ones) but this didn't work.
I'm clueless. Help please!
My system: Macbook Pro 2.4 Ghz IC2D, 4GB DDR3, running 10.6.8, 80GB free on disk.

Hi,
I had the same problem with Logic Studio 9 on an Intel Mac running Lion 10.7.2. I searched for the solution and found that this is a very common error with no solution! They generally say edit the InstallHistory.plist file in the /Library/Receipts folder. That works for someone for some reason but didn't work for me and for a lot of people.
Here's what I found: Pacifist. There's enough explanation and documentation on the web.
So, don't believe those who say your DVD was damaged. It's not.

Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update.

When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."

What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.

Can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.

I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

Trying to install windows 7 and getting error message windows must be installed to a partition formatted as NTFS

Trying to install windows 7 and getting error message Windows must be installed to a partition formatted as NTFS

Welcome to Apple Support Communities
Boot Camp Assistant creates a Windows partition in FAT32 to make the Windows XP installation easier.
The problem is that Windows Vista, 7 and 8 require a NTFS partition, so the Windows installer gives this error. The only thing you have to do is to choose the BOOTCAMP partition in the installer and go to “Drive options (advanced)” > Format. Finally, install it

TDM Excel Add-In for Microsoft Excel will not install: Installation Summary No software will be installed or removed.

Hello,
My7 computer is running Windows 7, I have the Base installation of LabVIEW, and have Microsoft Office 2007 installed.
I have downloaded the Add-In for Microsoft Excel from:
http://zone.ni.com/devzone/cda/epd/p/id/2944
unzipped it successfully (66 files created)
searched for messages and updates (No notifications.)
and I get a screen reading:
Start Installation
Review the following summary before continuing.
Installation Summary
No software will be installed or removed.
The "Next" button is grayed out, leaving "Save File" "<<Back" and "Cancel"
Does anyone have a suggestion why I am unable to go any further?
Thank you,
Solved!
Go to Solution.

Are you sure it hasn't been installed before? Under Control Panel...Programs and Features...National Instruments Software...do a "Change/Remove" and look down the list for "NI TDM Excel Add-In verX.XX". If found, uninstall and re-run the installer for the newest version.
This might help as well.
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx

Can't download itune 10.5. it says window installer error occurs while i was installing . what should i do???

can't download itune 10.5.
it says window installer error occurs while i was installing it.
what should i do?? i tried everything. i just can't download it.

I have the same problem, PC with windows 7 and 64 bit. Don't know how to fix yet

You canot install ipod on this volume. This software must be installed on t

"you canot install ipod on this volume. This software must be installed on the startup volume."
what does this mean? i unplugged my ipod with out ejecting it, so now im trying to "restore" or whatever the sofwater on the ipod like it says, but its not allowing me to do so because that message comes up

This message means that you're trying to install the iPod updater onto the iPod itself; instead, click on your hard disk in the list of disks, open the iPod updater in the /Applications/Utilities/ folder, click the Restore button, and follow the onscreen instructions.
(11166)

Error- DBMS_STANDARD package must be created before using PL/SQL

HI
I am trying to run a very small and simple program on my Oracle81 personal edition on Win98.
I get this error when i want to execute the program
" package DBMS_STANDARD must be created before using PL/SQL "
What should i do to create the package??
Thank you
Lin

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this question to the Database - General forum or the Installation forum.
The URLs are:
General Database Discussions
and
Database Installation

Installation error-Argument tnsnamesOraTemplate must point to an existing f

Hi experts,
I am getting below error during installation
ERROR      2011-08-30 19:19:44.309 [sixxcstepexecute.cpp:937]
FCO-00011 The step doNetworkConfigurationClient with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|std|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|doNetworkConfigurationClient was executed with status ERROR ( Last error reported by the
step: Assertion failed: OraNetworkConfigurator.doClientNetworkConfiguration: Argument tnsnamesOraTemplate must point to an existing file.).
I have checked existing file, everything this fine
cat tnsnames.ora
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/701-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#1 $
SMS.WORLD=
(DESCRIPTION =
    (ADDRESS_LIST =
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = uschgsbx002)
          (PORT = 1542)
    (CONNECT_DATA =
       (SID = SMS)
       (GLOBAL_NAME = SMS.WORLD)
(*root*on uschgsbx002)
/oracle/SMS/112_64/network/admin#
here we use the port numbers matching with instance no of sap
Please have a look and let me know your inputs
regards
vasu

hi
I have solved this issued. the issue came because installation master corrupted files
Regards
Srinivas

I get itunes installer error when i try to install update 10.4.1

I have downloaded new Itunes update, but it won't install. I keep getting message to try to reinstall, but it keeps coming back with same message that the installer encountered errors during install and no changes to the configuration were made.
Thanks for your help.

user12957520 wrote:
Please suggest how to solve the above issue on red hat 5.2, ebs r12:
[root@EBSLive RPM]# rpm -ivh compat-libcap1-1.10-1.x86_64.rpm
warning: compat-libcap1-1.10-1.x86_64.rpm: Header V4 DSA signature: NOKEY, key ID 652e84dc
error: Failed dependencies:
rpmlib(FileDigests) <= 4.6.0-1 is needed by compat-libcap1-1.10-1.x86_64
rpmlib(PayloadIsXz) <= 5.2-1 is needed by compat-libcap1-1.10-1.x86_64Please do not create duplicate threads -- error when I try to install rpm compat-libcap1-1.10-1.x86_64.rpm,

Windows Installer Error when I attempt to install BlackBerry Desktop Software XP Pro

When I attempt to install Desktop Manager I get the following error...
Windows ® Installer. V 3.01.4000.1823
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.
Any ideas?

Hi,
Please answer my questions as well as JClarks, OK?
I cannot see that there is a error code associated with it.
this is the base error KB that references the .msi files.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04995&sliceId=SAL_Pub...
Specify the following
PC, OS (if vista 32 or 64 bit) (specify service packs)
Version of Desktop software installed
Version of USB drivers you installed with the Desktop software
Thanks,
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Installation error....fresh install on a fresh clean server 2012...

Hi,
I am installing Exchange 2013, a fresh install on a fresh clean server 2012, but after copying the files, it says "Setup is preparing the necessary resources before......" and then it gives the error message as shown below:
"Exchange server is in an inconsistent state. Only disaster recovery mode is available. Please use Setup/m:RecoverServer to recover this Exchange server.".
In addition in the ExchangeSetup.log file, I see the following at the bottom of the file:
"[10/09/2013 16:52:55.0448] [0] Setup is determining what organization-level operations to perform.
[10/09/2013 16:52:55.0448] [0] Setup has detected a missing value. Setup is adding the value PrepareDomain.
[10/09/2013 16:52:55.0448] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[10/09/2013 16:52:55.0448] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[10/09/2013 16:52:55.0495] [0] InstallModeDataHandler has 9 DataHandlers
[10/09/2013 16:52:55.0495] [0] RootDataHandler has 1 DataHandlers
[10/09/2013 16:52:55.0588] [0] [ERROR] The Exchange Server is in an inconsistent state. Only disaster recovery mode is available. Please use Setup /m:RecoverServer to recover this Exchange server.
[10/09/2013 16:53:17.0182] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[10/09/2013 16:53:17.0182] [0] End of Setup
[10/09/2013 16:53:17.0182] [0] **********************************************"
Any idea what is causing this? Any help is appreciated. Thank you.

I just wanted to add a thank you as well to this post. I was installing a fresh copy of server 2012 with exchange 2013 CU3 (fresh install) and was getting this exact error message. What i had done to cause this is not deleting the computer AD account
prior to setting up another server with the same host name. I deleted the AD account and setup the serve 2012 installation again using that "exchange" hostname i wanted to keep. and then ran the Exchange 2013 CU3 installer again and it worked. The problem
was i didnt remove my existing exchange server properly. Thanks for the answer in this post it steered me in the right direction.

UHD installation error in pybombs trying to install OP25

Hi All,
This is my first post here. I am trying to install the OP-25 software and it uses pybombs to install all versions and dependencies. During the installation of UHD I received a fatal error 12% through.
I brought this up in the OP 25 forum but they said that it was specific to UHD and to ask here.
Here is the complete script that pybombs displayed, the error is near the end.
Please help !!
thanks,
Joe
Script follows (abbreviated due to 10000 character limit):
joe@joe-desktop:~$ ./pybombs install gr-op25
bash: ./pybombs: Is a directory
joe@joe-desktop:~$ cd pybombs
joe@joe-desktop:~/pybombs$ ./pybombs install gr-op25
Settled on prefix: /home/joe/target
Initializing environmental variables...
/home/joe/target/python/:/home/joe/target/lib/python2.6/site-packages/:/home/joe/target/lib64/python2.6/site-packages/:/home/joe/target/lib/python2.6/dist-packages/:/home/joe/target/lib64/python2.6/dist-packages/:/home/joe/target/lib/python2.7/site-packages/:/home/joe/target/lib64/python2.7/site-packages/:/home/joe/target/lib/python2.7/dist-packages/:/home/joe/target/lib64/python2.7/dist-packages/:/home/joe/target/python/:/home/joe/target/lib/python2.6/site-packages/:/home/joe/target/lib64/python2.6/site-packages/:/home/joe/target/lib/python2.6/dist-packages/:/home/joe/target/lib64/python2.6/dist-packages/:/home/joe/target/lib/python2.7/site-packages/:/home/joe/target/lib64/python2.7/site-packages/:/home/joe/target/lib/python2.7/dist-packages/:/home/joe/target/lib64/python2.7/dist-packages/
---------- loading recipes -------------------
Loading recipes ...
Loading recipes ... done
---------- loading recipes finished ----------
checking for gr-op25
False
/home/joe/pybombs/mod_pybombs/sysutils.py:588: RuntimeWarning: tempnam
is a potential security risk to your program
tmpfile = os.tempnam(d);
TMPFILE = /home/joe/target/fileIUp2rF
WRITE PERMS OK /home/joe/target/fileIUp2rF
installing gr-op25
gr-op25 dep [['gnuradio', 'boost', 'libpcap', 'gr-osmosdr', 'libitpp',
'git', 'cmake']]
gnuradio dep [['make', 'boost', 'fftw', 'cppunit', 'swig', 'gsl', 'uhd',
'git', 'python', 'cheetah', 'wxpython', 'numpy', 'lxml', 'pygtk',
'pycairo', 'cmake', 'pyqt4', 'pyqwt5', 'gcc', 'ice', 'git', 'cmake']]
make dep [[]]
swig dep [['python', 'wget', 'gcc']]
mcpp dep [['curl', 'wget']]
curl dep [[]]
wget dep [[]]
cmake dep [['wget']]
libitpp dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
packages to install: ['libusb', 'uhd', 'pycairo', 'mcpp', 'db48', 'ice',
'gnuradio', 'rtl-sdr', 'osmo-sdr', 'hackrf', 'libosmo-dsp', 'gr-iqbal',
'gr-osmosdr', 'gr-op25']
install called (libusb)
install type priority: ['deb', 'src']
install deb called (libusb)
deb is not available locally
check remote repositories...
PyBombs.sysutils - INFO - deb_exists: Satisfies requirement...found
downloadable version of libusb-1.0-0-dev
CONDUCTING DEB INSTALL
deb install: pkgreq(libusb-1.0-0-dev,None,None)
bash exec (/home/joe/pybombs):: sudo apt-get -y install libusb-1.0-0-dev
[sudo] password for joe:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
libusb-1.0-0-dev
0 upgraded, 1 newly installed, 0 to remove and 37 not upgraded.
Need to get 156 kB of archives.
After this operation, 895 kB of additional disk space will be used.
Get:1 http://us.archive.ubuntu.com/ubuntu/ precise/main libusb-1.0-0-dev
i386 2:1.0.9~rc3-2ubuntu1 [156 kB]
Fetched 156 kB in 8s (19.2
kB/s)
Selecting previously unselected package libusb-1.0-0-dev.
(Reading database ... 242403 files and directories currently installed.)
Unpacking libusb-1.0-0-dev (from .../libusb-1.0-0-dev_2%
3a1.0.9~rc3-2ubuntu1_i386.deb) ...
Processing triggers for doc-base ...
Processing 1 added doc-base file...
Registering documents with scrollkeeper...
Setting up libusb-1.0-0-dev (2:1.0.9~rc3-2ubuntu1) ...
installation ok via: deb
install called (uhd)
install type priority: ['deb', 'src']
install deb called (uhd)
no deb satisfiers available
install src called (uhd)
state = configure
Current step: (uhd :: make)
make
('\n    make -j4\n', '\n    make -j$makewidth\n')
('\n    make -j4\n', '\n    make -j4\n')
bash exec (/home/joe/pybombs/src/uhd/host/build)::
   make -j4
[ 12%] [ 12%] Built target man_page_gzips
[ 12%] Built target manual_html
Built target doxygen_docs
make[2]: *** No rule to make target `/usr/lib/libusb-1.0.so', needed by
`lib/libuhd.so.003.006'. Stop.
make[1]: *** [lib/CMakeFiles/uhd.dir/all] Error 2
make: *** [all] Error 2
ERROR:rootyBOMBS Make step failed for package (uhd) please see bash
output above for a reason (hint: look for the word Error)
joe@joe-desktop:~/pybombs$

Script pg 2
PyBombs.sysutils - INFO - have_deb: Satisfies requirement...installed
version of python-cheetah (2.4.4) is >= than 2.0
boost dep [['python', 'libbzip', 'wget']]
gsl dep [['wget']]
numpy dep [['python', 'swig', 'wget', 'python']]
cppunit dep [['wget']]
fftw dep [['wget']]
git dep [['wget', 'curl']]
cmake dep [['wget']]
git dep [['wget', 'curl']]
python dep [['wget']]
cheetah dep [['python', 'wget', 'python']]
wxpython dep [['gtk2', 'python', 'swig', 'wget']]
numpy dep [['python', 'swig', 'wget', 'python']]
lxml dep [['python', 'libxml', 'libxslt', 'setuptools', 'wget',
'python']]
PyBombs.sysutils - INFO - have_deb: Satisfies requirement...installed
version of python-lxml (2.3.2) is >= than 2.3.2
pygtk dep [['python', 'swig', 'gtk2', 'pygobject', 'pango', 'cairo',
'wget']]
PyBombs.sysutils - INFO - have_deb: Satisfies requirement...installed
version of python-gtk2 (2.24.0) is >= than 2.17
pycairo dep [['cairo', 'python', 'wget']]
cairo dep [['fontconfig', 'libpng', 'pixman', 'x11', 'wget']]
PyBombs.sysutils - INFO - have_deb: Satisfies requirement...installed
version of libcairo2 (1.10.2) is >= than 1.8.10
python dep [['wget']]
wget dep [[]]
cmake dep [['wget']]
pyqt4 dep [['python', 'sip', 'qt4', 'wget']]
PyBombs.sysutils - INFO - have_deb: Satisfies requirement...installed
version of python-qt4 (4.9.1) is >= than 4.6.2
pyqwt5 dep [['qwt5', 'pyqt4', 'sip', 'wget']]
PyBombs.sysutils - INFO - have_deb: Satisfies requirement...installed
version of python-qwt5-qt4 (5.2.1) is >= than 5.2
gcc dep [[]]
ice dep [['swig', 'mcpp', 'db48', 'libbzip', 'expat', 'python', 'wget',
'ssl']]
swig dep [['python', 'wget', 'gcc']]
mcpp dep [['curl', 'wget']]
curl dep [[]]
wget dep [[]]
db48 dep [['wget']]
wget dep [[]]
libbzip dep [['wget']]
expat dep [['wget']]
PyBombs.sysutils - INFO - have_deb: Satisfies requirement...installed
version of libexpat1-dev (2.0.1) is >= than 2.0.1
python dep [['wget']]
wget dep [[]]
ssl dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
boost dep [['python', 'libbzip', 'wget']]
libpcap dep [[]]
gr-osmosdr dep [['uhd', 'rtl-sdr', 'osmo-sdr', 'hackrf', 'gnuradio',
'gr-iqbal', 'git', 'cmake']]
uhd dep [['make', 'swig', 'python', 'libusb', 'git', 'cmake', 'cheetah',
'boost', 'gsl', 'numpy', 'cppunit', 'fftw', 'git', 'cmake']]
make dep [[]]
swig dep [['python', 'wget', 'gcc']]
python dep [['wget']]
libusb dep [['wget']]
wget dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
cheetah dep [['python', 'wget', 'python']]
boost dep [['python', 'libbzip', 'wget']]
gsl dep [['wget']]
numpy dep [['python', 'swig', 'wget', 'python']]
cppunit dep [['wget']]
fftw dep [['wget']]
git dep [['wget', 'curl']]
cmake dep [['wget']]
rtl-sdr dep [['libusb', 'git', 'cmake']]
libusb dep [['wget']]
wget dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
osmo-sdr dep [['git', 'cmake', 'libusb', 'git', 'cmake']]
git dep [['wget', 'curl']]
cmake dep [['wget']]
libusb dep [['wget']]
wget dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
hackrf dep [['git', 'cmake', 'libusb', 'git', 'cmake']]
git dep [['wget', 'curl']]
cmake dep [['wget']]
libusb dep [['wget']]
wget dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
gnuradio dep [['make', 'boost', 'fftw', 'cppunit', 'swig', 'gsl', 'uhd',
'git', 'python', 'cheetah', 'wxpython', 'numpy', 'lxml', 'pygtk',
'pycairo', 'cmake', 'pyqt4', 'pyqwt5', 'gcc', 'ice', 'git', 'cmake']]
make dep [[]]
boost dep [['python', 'libbzip', 'wget']]
fftw dep [['wget']]
cppunit dep [['wget']]
swig dep [['python', 'wget', 'gcc']]
gsl dep [['wget']]
uhd dep [['make', 'swig', 'python', 'libusb', 'git', 'cmake', 'cheetah',
'boost', 'gsl', 'numpy', 'cppunit', 'fftw', 'git', 'cmake']]
make dep [[]]
swig dep [['python', 'wget', 'gcc']]
python dep [['wget']]
libusb dep [['wget']]
wget dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
cheetah dep [['python', 'wget', 'python']]
boost dep [['python', 'libbzip', 'wget']]
gsl dep [['wget']]
numpy dep [['python', 'swig', 'wget', 'python']]
cppunit dep [['wget']]
fftw dep [['wget']]
git dep [['wget', 'curl']]
cmake dep [['wget']]
git dep [['wget', 'curl']]
python dep [['wget']]
cheetah dep [['python', 'wget', 'python']]
wxpython dep [['gtk2', 'python', 'swig', 'wget']]
numpy dep [['python', 'swig', 'wget', 'python']]
lxml dep [['python', 'libxml', 'libxslt', 'setuptools', 'wget',
'python']]
pygtk dep [['python', 'swig', 'gtk2', 'pygobject', 'pango', 'cairo',
'wget']]
pycairo dep [['cairo', 'python', 'wget']]
cairo dep [['fontconfig', 'libpng', 'pixman', 'x11', 'wget']]
python dep [['wget']]
wget dep [[]]
cmake dep [['wget']]
pyqt4 dep [['python', 'sip', 'qt4', 'wget']]
pyqwt5 dep [['qwt5', 'pyqt4', 'sip', 'wget']]
gcc dep [[]]
ice dep [['swig', 'mcpp', 'db48', 'libbzip', 'expat', 'python', 'wget',
'ssl']]
swig dep [['python', 'wget', 'gcc']]
mcpp dep [['curl', 'wget']]
curl dep [[]]
wget dep [[]]
db48 dep [['wget']]
wget dep [[]]
libbzip dep [['wget']]
expat dep [['wget']]
python dep [['wget']]
wget dep [[]]
ssl dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
gr-iqbal dep [['gnuradio', 'libosmo-dsp', 'git', 'cmake']]
gnuradio dep [['make', 'boost', 'fftw', 'cppunit', 'swig', 'gsl', 'uhd',
'git', 'python', 'cheetah', 'wxpython', 'numpy', 'lxml', 'pygtk',
'pycairo', 'cmake', 'pyqt4', 'pyqwt5', 'gcc', 'ice', 'git', 'cmake']]
make dep [[]]
boost dep [['python', 'libbzip', 'wget']]
fftw dep [['wget']]
cppunit dep [['wget']]
swig dep [['python', 'wget', 'gcc']]
gsl dep [['wget']]
uhd dep [['make', 'swig', 'python', 'libusb', 'git', 'cmake', 'cheetah',
'boost', 'gsl', 'numpy', 'cppunit', 'fftw', 'git', 'cmake']]
make dep [[]]
swig dep [['python', 'wget', 'gcc']]
python dep [['wget']]
libusb dep [['wget']]
wget dep [[]]
git dep [['wget', 'curl']]
cmake dep [['wget']]
cheetah dep [['python', 'wget', 'python']]
boost dep [['python', 'libbzip', 'wget']]
gsl dep [['wget']]
numpy dep [['python', 'swig', 'wget', 'python']]
cppunit dep [['wget']]
fftw dep [['wget']]
git dep [['wget', 'curl']]
cmake dep [['wget']]
git dep [['wget', 'curl']]
python dep [['wget']]
cheetah dep [['python', 'wget', 'python']]
wxpython dep [['gtk2', 'python', 'swig', 'wget']]
numpy dep [['python', 'swig', 'wget', 'python']]
lxml dep [['python', 'libxml', 'libxslt', 'setuptools', 'wget',
'python']]
pygtk dep [['python', 'swig', 'gtk2', 'pygobject', 'pango', 'cairo',
'wget']]
pycairo dep [['cairo', 'python', 'wget']]

Installation error in software update for xperia x10 (android 1.6 to 2.1)

i have installed pc companion 2.0 and followed all listed steps but the listed error message is the same ..i want to update my current and. OS to 2.1 firmware

Hi,
I noticed your post hasn't been answered. Have you now managed to update your X10 to Android 2.1 successfully?
If not, have you tried using the Update Service program instead of PC Companion?

Installation error: "MaxDB Software must be installed before ..."

Similar Messages

Maybe you are looking for