Installation Error NW2004sSP7_Preview because of the left Keys of previous

Hi All,
We try to install the previous version of NW04SneakPreviewSP15.part1.rar local on WindowsXP (SP2) System, without any success. But this mistake we think is on our side, because we use the JDK 1.5. So we remove this installation. With the next try we have only errors because the first installation is not properly removed. SO we download the version NW2004sSP7_Preview and we try to install this one. But it is not successful, we received the error:
INFO 2006-05-11 07:58:44
Execute step CheckExistingServerSoftware of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|0|0.
ERROR 2006-05-11 07:58:44
MDB-07057  The system is inconsistent. Registry or SAP_DBTech information is available, but software is not complete.
ERROR 2006-05-11 07:58:44
MUT-03025  Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2006-05-11 07:58:45
FCO-00011  The step CheckExistingServerSoftware with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_ServerSoftware_Dialogs|ind|ind|ind|ind|0|0|CheckExistingServerSoftware was executed with status ERROR .
So some registry keys are already left. Is there a possible and easy way to remove them? Otherwise it is very hard to find all this keys.
Thanks
Markus

Hi
Please meet the pre-requiste
1.     Operating system: Windows 2000 (Service Pack 3); Windows XP Professional (Service Pack 1) or Windows Server 2003
2.     NTFS-File systems
3.     Internet Explorer 5.5 or higher or Firefox 1.0 or higher
4.     At least 1 GB RAM, 2 GB are recommended
5.     Intel Pentium III/1.1 GHz or higher (or compatible)
6.     8 GB hard disc space recommended
7.     High-resolution monitor (1024x768 or higher, 256 colors)
8.     Sun Microsystems J2SE SDK version 1.4.2_08 (Sun JDK 1.5 not tested). You can download this from Sun Microsystems at http://java.sun.com/products/archive/j2se/1.4.2_08/index.html. Please note that version 1.4.2_10 may cause installation problems.
9.     If you have SAP products already installed on your computer, ensure that none are called "J2E".
10.     The file C:\WINNT\system32\drivers\etc\services (Windows 2000) or C:\Windows\system32\drivers\etc\services (Windows XP) must not include an entry for the ports 3601, 3201 and 50000 to 50030. A possible entry can be excluded by using the hash symbol (#).
11.     If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter. This is described in detail within the contents of the download package.
12.     To use Interactive Forms based on Adobe software, you must install the necessary credential file and activate it using a unique password. Download the latest credential and password from SDN.
Cheers
Jawahar Govindaraj
PS: reward points

Similar Messages

  • After installation and first time boot, the F2 key won't work

    It's all in the title, I just installed sol10u2 on my PC (mb: ASUS P5GV-MX, proc: Pentium IV 3GHz, keyb: ps2 some Windows compatible).
    While installing it went OK, all keyboard buttons working, LCD 1280x1024 working, everything fine. After copying the files to HDD, I had to take out the DVD and reboot. That's OK.
    After the system got through the POSTm checked the configs or something, the text screen appeared asking whether I want to use Xorg or Xsun server for my X. The problem is that when I press the F2 (continue) the screen is not repainted and it stays the same as before (every second line is shown, and every second line is blank - black), and none of the function or non function buttons work either. I can hear a beep as an error for pressing any key.
    It would be nice to know how exactly should I have had to install Solaris to make it work. I mean I tried 2 times already, with the same results.
    Thanks

    Zapcat...
    All you have to do in order to remedy this greyed out menu situation is to download the iWeb 1.1.1 update image directly from Apple here...
    http://www.apple.com/support/downloads/iweb111.html
    Install this right over your current iWeb installation. I think you will find that your situation has improved.

  • SAP BPC installation - Errors during setup in the create database step

    Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
    I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
    I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
    My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
    first error pop-up:
    Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
    second error pop-up:
    System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
    After the SAP BPC setup:
    - in the SQL Database Engine the ApShell database was created
    - nothing for ApShell was created in Analysis Sever
    - in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
    It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
    To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change. 
    At this point I checked these two topics on this forum:
    Mulit-Server Install - Installation fails while creating AppServer Database
    Problem during BPC installation
    1) At first I tryied this solution:
    Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
    During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
    but nothing change: the "SAP BPC setup" problem I have still persists.
    2) Then I tryed this workaround:
    If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
    During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
    That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
    but the "restore database" fails > I've got the error written in red: OLAP database - fail
    What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
    Thanx very much in advance for your kindness if you can help me.

    Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
    - SQL server is EE.
    - I installed SQL server (including SSAS) using MyDomain\MyUser.
    - MyDomain\MyUser is windows administrator on both servers.
    - MyDomain\MyUser is SQL Server and SSAS administrator.
    - SSAS service is running under the same service account than the SQL Service. 
    - All my MSSQL services runs as Local System.
    - I'm installing SAP BPC using MyDomain\MyUser.
    - I also checked the SSAS service account specific rights to the SSAS data folders.
    SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
    In the database server, windows event viewer errors after the unsuccessful installation are:
    1) SOURCE: MSSQLSERVER
    Failure Audit: Login failed for user MyDomain\MyUser
    2) SOURCE: MSSQLSERVER
    BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
    As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
    Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
    For point 2:
    I tried 4 differents SAP BPC installations as follows:
    - to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
    - to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
    - to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
    - to don't go into advance options and to don't specify the path.
    but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
    I don't know how to solve it.
    Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM

  • Adobe LiveCycle ES 8.2 Installation Error can't configure the App Server from Config Manager

    Hello All-
    We are trying to install the Adobe LiveCycle ES 8.2 SP2 and we are getting some issues while configuring the Application Server from the Config Manager, not sure why are those showing up, we never had these issues before when we installed 8.0, please look at the lcm log and the screenshot I provided for the errors which we are getting.
    We are trying to configure the remote Application Server WebSphere on Linux from my machine which is on Windows and i made the target Application Server as WebSphere and target platform as linux when i initially installed the livecycle media.
    The LCM logs say it failed to run the jacl scripts in the LiveCycle root directory and we wonder why is it pointing for the target Application Server to the Application Server which resides on my machine rather than it should point to the one on server. I am not sure what's going on and we did exactly what we did for 8.0.
    Below are the environment details where we are trying to install.
    Adobe LiveCycle ES: 8.2 SP2
    Database: IBM DB2 9.1 FP4.
    JVM Version and Vendor: 1.5.0 IBM Corporation
    Application server: IBM WebSphere Application Server/6.1.0.19
    Operating System: Linux
    Hardware: x86 .
    Any help will be appreciated!
    Thanks-
    Karthik.

    Hi All,
    Even i was facing the same issue but i was able to resolve it.
    Although the earlier reply from karthik_chowdary was sent way back in 2008 and i think would have got resolved till now, but still the resolution which i have found is
    The port i was using on the app server conf screen was that of application server HTTP Port.
    But here in case of WebSphere ND, we need to use port specified in WAS UI > System administrator > Deployment manager > Ports
    Try using that by default it is 8879.
    And this resolved the issue.
    ~Hkin

  • SAP netweaver developer studio installation error: JDK is not the same as J

    Now i plan to create a java proxy.
    but when i install NWDS 7.1, the error show like this:
    JVM Version Check failed.
    Your JVM is not supported.
    Current JVM:
    Sun Microsystems Inc. JDK 1.6.0_10-rc2
    java.home = C:\Program Files\Java\jdk1.6.0_10\jre
    Supported JVMs:
    SAP AG JDK: java.version 1.5.0_06 or later
    Sun Microsystems Inc. JDK: java.version 1.5.0_06 or later
    Note, JDK is not the same as JRE. If JDK is required, JRE is not sufficient.
    how to resolve problem?
    thank you

    1.7 does not work
    JVM Version Check failed.
      Your JVM is not supported.
      Current JVM:
        Sun Microsystems Inc. JDK 1.7.0-ea
        java.home = C:\Program Files\Java\jdk1.7.0\jre
      Supported JVMs:
        SAP AG JDK: java.version 1.5.0_06 or later
        Sun Microsystems Inc. JDK: java.version 1.5.0_06 or later
      Note, JDK is not the same as JRE. If JDK is required, JRE is not sufficient.

  • Crawl Error GetVirtualServerPolicyInternal - An item with the same key has already been added

    Hi,
    I did an index reset and now I can't start any crawl. It's complaining "An item with the same key has already been added".  Exception seems to from Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal. 
    What should I check? Thanks.
    The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: 9e69ff9c-f925-50bf-5110-d1b0e74c77bc; SearchID = 522CB441-0028-4E7D-BED4-4230D7ADD14B
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dm1k Medium   Exception Type: System.ArgumentException *** Message : An item with the same key has already been added. *** StackTrace:    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean
    add)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal(String strStsUrl, WssVersions serverVersion, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String&
    strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicy(String
    strStsUrl, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String& strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean... 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93* mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dm1k Medium   ...& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     fsa0 Monitorable GetVirtualServerPolicy fail. error 2147755542, strStsUrl
    http://serverurl 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvt6 High     SetSTSErrorInfo ErrorMessage = Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 hr = 80042616  [sts3util.cxx:6988] 
    search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvi3 High     Couldn't retrieve server
    http://serverurl policy, hr = 80042616  [sts3util.cxx:1865]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvu0 High     STS3::StoreCachedError: Object initialization failed.  Message:  "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"
    HR: 80042616  [sts3util.cxx:7083]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvg4 High     Server serverurl security initialization failed, hr = 80042616 error Message Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 
    [sts3util.cxx:1591]  search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dv5x High     CSTS3Accessor::InitServer: Initialize STS Helper failed. Return error to caller, hr=80042616  [sts3acc.cxx:1932]  search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dv3t High     CSTS3Accessor::InitURLType fails, Url
    http://serverurl, hr=80042616  [sts3acc.cxx:288]  search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvb1 Medium   CSTS3Accessor::Init fails, Url
    http://serverurl, hr=80042616  [sts3handler.cxx:337]  search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Connectors:SharePoint        
     dvb2 Medium   CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80042616            [sts3handler.cxx:355]  search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
    04/22/2015 19:37:10.93  mssdmn.exe (0x1A34)                      0x225C SharePoint Server Search       Crawler:FilterDaemon         
     e4ye High     FLTRDMN: URL
    http://serverurl Errorinfo is "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"  [fltrsink.cxx:566]  search\native\mssdmn\fltrsink.cxx 
    04/22/2015 19:37:10.93  mssearch.exe (0x1118)                    0x0628 SharePoint Server Search       Crawler:Gatherer Plugin      
     cd11 Warning  The start address http://serverurl cannot be crawled.  Context: Application 'Enterprise_Search_Service_Application', Catalog 'Portal_Content'  Details:  The SharePoint item being
    crawled returned an error when requesting data from the web service.   (0x80042616) 
    04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
     ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
    load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. ab403221-f69c-43ef-a8cc-7df384f6a4b3
    04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
     ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. ab403221-f69c-43ef-a8cc-7df384f6a4b3
    04/22/2015 19:37:10.99  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                         Fuzzy Name Search            
     ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. ab403221-f69c-43ef-a8cc-7df384f6a4b3
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
    load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
     ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
    load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. e15da110-f86d-4e3d-8d73-a67dccaa82cd
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
     ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. e15da110-f86d-4e3d-8d73-a67dccaa82cd
    04/22/2015 19:37:11.00  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                         Fuzzy Name Search            
     ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. e15da110-f86d-4e3d-8d73-a67dccaa82cd
    04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to 
    load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 58d54385-497b-466d-9f02-aeba664bc1b6
    04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 58d54385-497b-466d-9f02-aeba664bc1b6
    04/22/2015 19:37:11.03  NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                         Fuzzy Name Search            
     ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 58d54385-497b-466d-9f02-aeba664bc1b6

    Hi,
    For troubleshooting your issue, please take steps as below:
    1. Try to crawl your content source using farm admin account.
    2.
    Disable loopback check .
    3.Add reference  SPS3s://WEB into your content source start addresses.
    For more information, please refer to these blogs:
    http://sharepoint.stackexchange.com/questions/5215/crawling-fails-with-404-error-message-but-the-iis-log-tell-a-different-story
    http://www.cleverworkarounds.com/2011/07/22/troubleshooting-sharepoint-people-search-101/
    http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Ultra nav mouse left key moves incorrectl​y

    Ultra nav mouse left key moves incorrectly or it may be broken. It is still in place however the left key rocks to the left and sticks, causes erratic reactions. Can this be fixed? I have lifted the right edge of the key up, cleaned, and adjusted the wire placement to no avail.
    Thank you for any ideas.

    What I suspect is happening here is an error with relative positioning, ie. when I move the right thumbstick left it's setting the cursor to an extremely low value, say -100,000 and therefore when I move it right because the minimum value is supposed to be -32768 it has to surpass that value before actually visibly moving right.
    Does anybody know how I could track the actual x,y co-ordinates of the cursor to establish if this is happening?
    Edit: enabled log statements in xboxdrv config. My theory has proved incorrect. I'm stumped.
    Last edited by darArch (2013-08-05 18:51:20)

  • General Installation Error, mac 10.8.2

    I downloaded the latest flash player from the abode website (for mac, safari, english). Download is fine. Installation proceeds to about 50% completion and then terminates with a "General Installation Error". Here's the configuration:
    Mac intel core 2 duo 2.26 GHz
    OS 10.8.2
    Safari 6.0.2
    I downloaded the flash player uninstaller, and it reported a successful uninstall. Also checked for directories in /Library/Internet Plugins and the (Disabled) folder. No flash player components left.
    Checked pop-up blocker (it's not set), system preferences (download apps from any source is checked). Also disabled norton auto-protect. Install still fails.
    I'm out of ideas. Any suggestions would be greatly appreciated.

    There doesn't appear to be a solution to these particular error messages from Adobe. I have followed the guidance from Adobe.com (uninstalled and re-installed) and then followed the guidance in this forum post and others using the terminal route, all without luck. I have no Flash functionality (other than in Chrome) which is extremely annoying.
    My setup is MacBookPro Mavericks 10.9. Firewall is off (temporarily). No virus software. No remnants of Flash as far as I can tell. Logged into a administrator account.
    Here's the log for "flash" from console:
    Dec 26 12:55:15 XXX kernel[0]: hfs: mounted Adobe Flash Player Installer on device disk2s2
    Dec 26 12:55:15 XXX.config mds[55]: (Normal) Volume: volume:XXX ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Adobe Flash Player Installer
    Dec 26 12:55:41 XXX.config sudo[791]:    admin : TTY=ttys000 ; PWD=/Users/admin/Desktop ; USER=root ; COMMAND=./Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player –debug
    Dec 26 12:56:07 XXX kernel[0]: hfs: could not initialize summary table for Flash Player
    Dec 26 12:56:07 XXX kernel[0]: hfs: mounted Flash Player on device disk3s2
    Dec 26 12:56:08 XXX.config Adobe Flash Player Install Manager[818]: Unexpected umask value for process: 0
    Dec 26 12:56:26 XXX.config Adobe Flash Player Install Manager[818]: Install failed with error code: 11.
    Dec 26 12:56:26 XXX kernel[0]: hfs: unmount initiated on Flash Player on device disk3s2
    Dec 26 12:56:31 XXX.config sudo[839]:    admin : TTY=ttys000 ; PWD=/Users/admin/Desktop ; USER=admin ; COMMAND=/usr/bin/open http://get.adobe.com/flashplayer/completion/aih/?exitcode=11&type=install
    Many thanks in advance for your support.

  • X1 Carbon TrackPoint left-key smudge, Help clean

    I got a slightly used X1 Carbon 34XX version (2013 model) recenetly.
    I have been using t430 for quite a long time now but now when I'm on X1 carbon I notice that the Left-key with the trackpoint is not registering properly..when I click on the area close to the scroll key, which is naturally where my finger presses, The key goes down to its seat but it misses registry and often creates problems when I drag items. I have to push it down with an extra force to make sure the key wont miss.
    The same key works very responsive when I click on the other end (left end) of the key. But near the scroll key it feels as if something underneath the key has shifted or something...I tried tapping it, hitting it, pulling it upwards and pressing it hard but none of that helped.
    I was wondering if anyone could provide me help on how to remove this key and clean whats underneath and fix it. I know how to remove the keyboard but not sure how to get to this key.
    Thank you

    Hey there MichelDK,
    The information you've provided I'm sure will be extremely useful to those in community who are experiencing errors with their Ericsson WWAN cards in Windows 8. If you are able by chance to recall the name of the device this would be extremely helpful, as this information could easily be turned into a knowledgebase article for the community to reference.
    Thank you for being a part of the Lenovo Community MichelDK!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • SharePoint Search Service upgrade to 2013 fails: "Inner Exception: An item with the same key has already been added."

    Here's the situation:
    Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
    Running the following commands: 
    $applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
    $searchInst = Get-SPEnterpriseSearchServiceInstance -local
    Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
    Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
    "Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
    Looking at the ULS logs, I find the following:
    Inner Exception: An item with the same key has already been added.
    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties()     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
    upgrade)     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade()     at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade()     at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
    Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
    at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade()     at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
    o, Boolean bRecurse)
    Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
    "SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.

    Hi ,
    You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
    http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
    https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • REP-52005: The specified key userlogin does not exist in the key map file.

    Hi,
    I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
    I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
    ; OracleAS Reports Services                       ;
    ; CGICMD.DAT                                      ;
    ; Example CGICMD.DAT Mapping file                 ;
    ; Syntax: 
    ;      KEY : VALUE
    ; Where:
    ; KEY - the first argument of the rwservlet URL request (case sensitive).
    ; VALUE - command line parameters and/or special parameters.
    ; Keys can be referenced in the following ways:
    ;    1. Parameter on command line to the reports servlet
    ;          e.g. http://machine/servlet/rwservlet?KEY
    ;    2. Parameter on command line to a reports jsp
    ;          e.g. http://machine/mydir/myreport.jsp?KEY
    ;    3. Within a reports jsp - in the rw:report custom tag
    ;          e.g. <rw:report parameters="KEY">
    ; In addition to the Reports Server command line parameters, VALUE can include special parameters
    ; represented as "%X", where X identifies the parameter. Currently recognized special
    ; parameters:
    ;  %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
    ;  %* - entire contents (all arguments) of original rwservlet URL request.
    ;  %D - request users to input database userid everytime they run the report.
    ;  %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
    ;       construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
    ; CGICMD.DAT Usage Notes
    ;   1. Multiple keys in this file MUST be separated by an EXTRA empty line.
    ;   2. Extra spaces are ignored. Multi-line entries allowed.
    ;   3. Lines starting with ";" character are treated as a comments.
    ;   4. Comments within a key or key value are NOT allowed.
    ;   5. NLS language support is provided and can be used (encoding should match the one
    ;      used in HTML request - no language conversion of any kind is attempted.
    ;   6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
    ;      The HTML format in the future may be mapped to the HTMLCSS format.
    ;;;;;;;;;;;; Example Key Entries
    ;  Example 1:  Run a simple breakb report and output to HTML
    orqa: report=breakb.rdf destype=cache desformat=html server=repserver
    ; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
    report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
    ; Example 3: use %D to require user authentication every time
    report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
    ; Example 4:  Take all arguments from URL and send it to the reports server
    run: %*
    ; Example 5:  Run breakb report with HTML parameter form.
    breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
    ; Example 6: take all URL arguments, and also generate a HTML parameter form  
    runp: %* %P
    ; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
    ; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
    express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
    ;;;;;;;;;;;; Keys for Reports Demos
    ; Using default/in-process server.
    ; JSPs
    ;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
    ;charthyperlink_ids: userid=scott/tiger@ %*
    ;barcodeweb:         userid=oe
    ;parmformjsp:        userid=oe
    ;tutorial:           userid=oe
    ; Paper Reports
    ;xmldata:            userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
    ;barcodepaper:       userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
    ;distributionpaper:  userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
    ;pdfenhancements:    userid=oe report=utf8test.rdf destype=cache desformat=pdf
    userlogin : userid=SYMFINBTOTEST@fin10r21 %*
    As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
    http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
    It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
    Parsed Map File Entries
    Return to Top
    Key Name
    Value
    runp
    %* %P
    breakbparam
    report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
    report_defaultid
    report=breakb.rdf destype=cache desformat=html server=repserver
    run
    report_secure
    report=breakb.rdf destype=cache desformat=html server=repserver %D
    express
    report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
    orqa
    report=breakb.rdf destype=cache desformat=html server=repserver
    Please help me to to make the key being populated here and being used by the reports server.
    Thanks,
    Priya

    uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
    then for development set
    reloadkeymap=yes (same file - rwservlet.properties).
    Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
    (For * production* may be you want to set reloadkeymap=no once all testing is done)
    see cgicmd.dat for many examples of using keymap file
    [ All Docs for all versions ]
    http://otn.oracle.com/documentation/reports.html
    [ Publishing reports to web - 10G ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [ Building reports - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [ Forms Reports Integration whitepaper 9i/10g ]
    9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
    http://www.oracle.com/technology/products/forms/techlisting10g.html
    ---------------------------------------------------------------------------------

  • REP-52005: The specified key replabel does not exist in the key map file.

    Hi,
    I am using oracle 11g report server. I am getting the error of REP-52005: The specified key replabel does not exist in the key map file.
    I updated the user_string in cgicmd.dat file but of no use. Plese kindly help me on the same.

    uncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
    then for development set
    reloadkeymap=yes (same file - rwservlet.properties).
    Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
    (For * production* may be you want to set reloadkeymap=no once all testing is done)
    see cgicmd.dat for many examples of using keymap file
    [ All Docs for all versions ]
    http://otn.oracle.com/documentation/reports.html
    [ Publishing reports to web - 10G ]
    http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
    http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
    [ Building reports - 10G ]
    http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
    http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
    [ Forms Reports Integration whitepaper 9i/10g ]
    9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
    10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
    http://www.oracle.com/technology/products/forms/techlisting10g.html
    ---------------------------------------------------------------------------------

  • 32bit DIFx Driver Installer Error when Installing 9.0.2

    Never had a previous problem with iTunes and when I went to use it this morning, it crashes everytime. Uninstalled completely, reinstalled 9.0.2 and now I get an error "32bit DIFx Driver Installer" and iTunes "finishs" installing and crashes after opening again. Have tried unsuccessfully to figure out a fix for this. All my children got iPod Touches for Christmas and I got a brand new iPod nano and none of us can use them now. Please help!

    Hey guys! So, I experienced the same issues with the newest iTunes update. I updated several days ago, but I used iTunes for the first time since the update today. iTunes would load but immediately display a message that it needed to close. After several attempts to open iTunes, I reinstalled QuickTime as suggested by another website. Also suggested was trying to repair QuickTime and iTunes. When that didn't work, I removed both QuickTime and iTunes and did a clean reinstall from new downloads. When I did this, I got the 32bit DIFx Driver Installer error. It "finished" the install, but it still closed immediately upon opening. I ran Malware-Bytes and Hijack This to check for spyware/adware/mal-ware a few days ago so I was fairly certain my system was clean...but after two hours of trying to figure out this problem, I decided to go ahead and check for virus or malware.
    Indeed, I found six files (mostly located in the System Volume Information folder). After having Avast remove these files...iTunes successfully installed without the DIFx error! So much for being "sure" my system was clean. The files found were all related to the Win32:Malware-gen virus.
    So I suggest you check your system for malware and virus infection. I did my scan in safe mode and did the most in-depth search that Avast will perform. I highly suggest doing a full search with UPDATED virus program even if you think your computer is okay.
    I have had no issues with iTunes after cleaning my computer!

  • Adobe Flash Player 12 installation error

    I cannot install Adobe Flash Player 12. I go through all of the setting and just when I think it's about to finish I get the "General Installation Error" message.
    I've trashed all the Flash Player folders in my library but it hasn't helped. Any suggestions?

    Hi,
    I am having the same issue.
    This link is probably more useful though not in my case.
    http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.ht ml
    I too get the General Installation error and have followed the advice on the Adobe website.
    "Close all browsers if an error message appears."
    I have closed all browsers (force quit) but still get the "General Installation Error", interesting I also get update Garmin communicator.
    I have 18GB free on my drive.
    Any ideas what would cause the Mac Installation packages to fail?

  • What does "General Installation Error" mean?

    I was attempting to install Flash Player  ver. 11.9.900.117 on a MacBook Pro running Mac OS X v. 10.8.5. The installation fails with the message "General Installation Error." What is the cause of this error and how do I fix it?

    I'm not sure if I deleted it or not, but having read several of the messages posted on this thread I did the on-line re-installation of the OS just in case I did unwittingly. After re-installing the OS, I'm now able to install the latest version of Flash Player.
    The upshot is don't delete that mach_kernel file!
    Mystery solved!
    P.S. - Has anyone posted or passed this onto Apple?

Maybe you are looking for

  • Messages not showing in Gmail (without ABP installed)

    I'm using FF 8.0.1. Just had a clean install. Problem is, when i go to gmail, I can't view my messages, the messages pane is not showing. I'm aware of the ABP bug, but i don't have it installed, so i think it's a different issue. Anyone has any ideas

  • Help about uiscrollView pinch

    i have some huge photos in my array. first i resize them and show it with scrollView one by one. and now i want to add pinch feature for my every image for that i downloaded and checked ScrollViewSuite example of Apple. and i applied the codes about

  • Connecting webserver to oracle database 10g didn't work

    Hi, I have webserver installed on SuSE Linux ES 10. I want to connect webserver to my oracle database 10 which is installed on SuSE Linux ES 9. I have download the instant client. But there is no success in connecting webserver to database. Can anyon

  • WLC 2112 and WLC 2504

    This might be a really stupid question but I need to ask just so that I get a definitive answer. I have a customer that is using a WLC 2112 and has maxed out the licenses for the WLC. I have suggested for him to purchase a 2504 with 30 or 40 licenses

  • What does actionlist not found mean when downloading flash player??

    My computer tells me i need to add a plugin. I attempt to download flash player but during installation i get the message " actionlist not found" and flash player does not load. now what??