Installation Error RFC connection with ddic user

Hi
        when i am installating IDES ECC6.0  iam unable to continue the installation
due to ddic password. i have tried with master and standard password but no use.
i have tired to logon to the system  using sap* user . But it also failed to logon .
       could any body help me this issue.
Thanks in advance.

Hi Kumar,
When you delete the user SAP*, please make sure you also add the parameter
login/no_automatic_user_sapstar = 0 to instance profile (your need to restart the SAP instance)
As NW2004S, that parameter prevent SAP* login using PASS password.
But before you do this, please just try to delete the SAP* user first and login using PASS password, if that not work than you should add the parameter and restart the SAP.
Hope this help.
FS

Similar Messages

  • IDES Installation error (RFC connection error)

    Hi
    Would someone help me?
    I have a problem while installing the IDES ,ECC 6.0 with MaxDB. (Linux)
    The installaiton of CI is holding in the phase " Checking the DDIC password "  and it seems a loop.
    Looking through sapinst.log ,  there is some messages.
    These messages are showing as a loop.
    INFO 2008-06-25 13:46:09
    RFC connection information checked successfully.
    ERROR 2008-06-25 13:47:10
    FRF-00007  Unable to open RFC connection.
    ERROR 2008-06-25 13:47:10
    MUT-03025  Caught ERfcExcept in Modulecall: Timeout.
    And I tried to logon ,but I didn't  because of the timeout.
    The window says "waiting for response" and the logon is over with a error,timeout.
    Any hints and advice would be helpful for me ,thanks.

    Hi,
    1. Check dailog work processes through OS level
    2. Check all profile parameters through OS level and change it according.
    3. Then try for sap logon with 000 client and password.
    After login into sap, check RFC connection within the system. using by tcode sm59.
    4. Finally you can check also MaxDB services at OS level.
    Regards,
    Srini Nookala
    Edited by: Srini Nookala on Jun 28, 2008 6:11 AM

  • How can i connect with HR User as it is not existing

    Hi this is Arslan
    I need your help in one problem and this problem i am facing from very start
    I have installed fresh copy of oracle 10g-2 and when I login with user HR it give following message
    Error: ORA-01017 : invalid user name / password; logon denied
    after this command i have executed other command
    alter user hr account unlock;
    then got error ORA- 01918 : USER 'HR' does not exist
    again i have executed one more command
    alter user hr identified by hr account unlock;
    but again receive error that user HR does not exist (error ORA- 01918 : USER 'HR' does not exist)
    then i have also check the hr in all_users list with command
    select * from all_user
    but did not find HR user in this list
    can you help me so that i can connect to the hr user, also tell me why this user is not creating with the oracle installation
    i have perform all above task with SYS @DBA
    Regards
    Arslan

    Arsal wrote:
    HI again
    i did the same and got success and now i am connecting with HR user.
    can you tell or any one else can tell how can i instal schema after the instalation of oracle/database.
    is there any option to install schema without being uninstall oracle
    Thanks and regards
    ArslanA schema is simply all of the objects (tables, etc.) that belong to a particular user. You definitely don't need to uninstall oracle. That would be like tearing out the entire telephone system just to add a phone at your house.
    Oracle provides some sample schemas. When you install Oracle, you have a choice of whether or not to create a starter database at installation, and whether or not to install one of the sample schemas. You can always create a new database after, and separately from, software installation. And you can always create one of the sample schemas after, and separately from, database creation.
    Of course, those are just sample schemas. In the real world, you'd create your own to meet your own business needs.
    More information on the sample schemas can be found at http://www.oracle.com/technology/obe/obe9051jdev/common/files/b10771.pdf
    Edited by: EdStevens on Feb 11, 2009 8:35 PM

  • A  *** ERROR = RFC ====== connection closed (no data)

    I trace data On Instance DEV_W0 the had Error as below
    A  *** ERROR => RFC ======> connection closed (no data)
    Please Kindly  verify  the cuase and recommend in this issue .
    Edited by: SoeyTH on Dec 6, 2010 3:38 PM

    You need to proivde more logs to find what caused.
    Is you SAP up?

  • Open and close RFC connection with portals...

    Hi Experts,
    I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO)  before that query and open the connction again after that query.
    Please advice is it possible to achieve this. If yes, then how.
    Regards,
    Guddan

    Hi Guddan,
    I created a RFC having a query which is taking a long time to execute. So i want to close RFC connection with portals which is via java connector(JCO) before that query and open the connction again after that query.
    I guess i will need to understand your requirement a little more in detail, as i understand you have an RFC which has a query within to fetch some data and is taking a long time to do so. In the meantime you don't want to keep the connection open?
    My question would be, Is the role of this RFC to only execute the query and fetch the data or does it do something else?
    If it does other things and these are independent of the query execution, then you can span a parallel call within the RFC to execute the query and in the meantime the RFC does the other things (or vice versa) hence reducing the overall time taken.
    If the sole purpose of this RFC is to execute the query, then you will not be able(i mean to say there is no simple and direct way of doing this) to close the connection after the Query is started and re-establish the connection after its execution, for a simple reason that - how will you know if the query has completed it's execution, so that you can establish the connection back.
    Alternate solutions, make this a two way asynchronous call, 1) You invoke the RFC asynchronously and close the connection, the RFC in turn will execute the query and transfer the data to JCO via another RFC call.
    If this needs to be a synchronous call, then you will need to optimize the query to its best.
    Regards,
    Chen

  • ISight - connects with windows users no problem?

    I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

    It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
    I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
    The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
    I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
    Skype has a video plugin (only for Windows)
    Yahoo! Messenger does not have voice yet (2.5.3)
    MSN is badmouthing because of the "M"
    I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
    The best two alternatives I found are:
    a) AIM 5.9
    b) Trillian (www.trillian.cc)
    Both use a free AIM screen name.
    AIM works fine, see also EZJim pages.
    TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
    The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
    TrillianBase is free but has no Video capabilities. The Pro version is 25$.
    Regards Coen
    ps. if you want to test your setup use my AIM screenname: coenjeukens

  • Establish a connection with the user peerID?

    Hello ,
    Know that a user's peerID, how to establish a connection with the user and send a message
    With netGroup.sendToNearest (message, GroupAddress) do?
    Seems to not realize?

    You can simply publish to the RTFMP stream both are connected to. Ryan Stewart once came up with this: http://tv.adobe.com/watch/tech-talk-with-ryan-stewart/build-a-chat-application-with-adobe- stratus/
    But besides you could of course only use a netgroup and send messages to neighbors with notifies.

  • Error RFC Connection

    Hi Gurus,
    I have a problem when i try to do a RFC connection Between SAP and Windows, this's the error message log Tx, sm59..
    EntrSist.     Error de conexión
    Det.error     / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=236 SAP gateway connection failed. I
    Det.error     ERROR: SAP gateway connection failed. Is SAP gateway started?
    Det.error     LOCATION: SAP-Server devinc_ICT_02 on host devinc (wp 1)
    Det.error     COMPONENT: CPIC
    Det.error     COUNTER: 6
    Det.error     MODULO:
    Det.error     LINE:
    Det.error     CÓD.RETORNO: 236
    Det.error     SUBRC: 0
    Det.error     RELEASE: 700
    Det.error     TMP.: Tue Aug 31 11:13:57 2010
    Det.error     VERSIÓN:

    Anup,
    the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
    make an entry like that:
    sapmsDEV   3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
    kind rtegards, achim

  • Source system error - RFC connection failed

    Hi Gurus,
                  I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
    so tried going to source system -> done a check for my source system then i got the following errors
    Source system "T90*" is inactive
    Entry in outbound table not found
    Entry in inbound  table not found
    Basic type does not exist
    Check failed for RFC connection T90CLNT090 ; check destination
    can any one tell me how to fix this issue?
    Regards,
    Ravi

    Hi Ravi,
                Did you run appication component hierarchy in source system(TX-RSA9)
    then activate your data source
    then replicate in BW system.
    Check here for BW connectivity with source system.
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
    Thanks,
    Vijay.

  • Dialog Instance Installation - Error while connecting to DB

    Hi All,
    We have installed a WAS 640 SP15 and successfully running a Portal EP6.0 (SP15) on the same. Now, we wish to install a dialog instance on the same for load balancing the Portal on the same Hardware/Server.
    During the DI installation in the phase "Configuring J2EE Engine", the installation fails with the error "Error while connecting to DB".
    I tried to restart the installation by replacing the JDBC and OS_LIB of the new instance with the JDBC and OS_LIB of the already running CI instance but it didnt help either.
    Any pointers in this direction will be appreciated.
    Thank you!!
    Regards,
    Abhijeet

    We have the same issue.  We have a NW04 SP19 J2EE standalone WAS and are using the SP19 SAPINST to add a second dialog instance on the same host as the central instance.
    We restarted the Oracle listener  ... to no avail
    The error in the Oracle batchconfig log is given below.
    Thanks for any insight that you can provide.
    Cheers .... Bart
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection
    (DBConnectionPool.java:360)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>
    (PersistenceHandler.java:38)

  • In App Purchase An unknown error has occurred with test user account

    I have created a test app that has in app purchasing. I am able to connect to the store and verify my product ID's. I then use my test user account to purchase a product. And guess what... it works... the first time. If I try to use the test user account to buy another product (the same product or a different one) then I get a pop up that says
    "An unknown error has occurred"
    with a "Cancel" and "Retry" option. If I retry then I get the same error. After hitting cancel I get the error:
    Error Domain=SKErrorDomain Code=0 UserInfo=0x161180 "Cannot connect to iTunes Store"
    Any ideas?

    I am having the same problem with my test account on multiple versions of iPhones. Any idea? Would this error affect real users?

  • Error in SetDefaultReport with normal users

    I have to change default report for the invoices. I try to use the ReportLayoutsService.SetDefaultReport method but i only have sucess if the user that I'm using at the moment is one Super User. If the user is not SU I have the following error: Internal Error (-10) Occurred.
    My code is:
    Try
                                Dim oCmpSrv As SAPbobsCOM.CompanyService
                                Dim oReportLayoutService As SAPbobsCOM.ReportLayoutsService
                                Dim oReportParam As SAPbobsCOM.DefaultReportParams
                                oCmpSrv = oCompany.GetCompanyService
                                oReportLayoutService = oCmpSrv.GetBusinessService(SAPbobsCOM.ServiceTypes.ReportLayoutsService)
                                oReportParam = oReportLayoutService.GetDataInterface(SAPbobsCOM.ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
                                oReportParam.CardCode = "-1" 'For all BPs
                                oReportParam.ReportCode = oDocCode
                                oReportParam.LayoutCode = oDocLayOut
                                oReportParam.UserID = oUserID
                                oReportLayoutService.SetDefaultReport(oReportParam)
                            Catch ex As Exception
                                MessageBox.Show(ex.Message)
                            End Try
    I already try to use:
    oReportParam.UserID = 1
    Trying make the change with user manager but i have the same error.
    How can I this work with normal Users. That no have authorization to change the layout.
    Best Regards for all.

    Olá Vitor,
    O problema é que se não conseguir instanciar auxCompany também não vou conseguir alterar o layout de impressão. Acho que a solução aqui é perceber porque é que falha quando está a instanciar auxCompany. Será por causa de outros utilizadores estarem a fazer o mesmo? Visto que estamos a falar de uma empresa com 7 filiais, o numero de documentos criados é muito elevado
    Mesmo tendo vários utilizadores a trabalhar ao mesmo tempo a instanciação de auxCompany não devia funcionar correctamente?
    Será por não estar a livertar correctamente o objecto no final da operação?
    auxCompany.Disconnect()
    auxCompany = Nothing
    Também coloquei uma validação para o caso de auxCompany já estar conectado na base de dados.
    If auxCompany.Connected = True Then
                                                Try
                                                    Dim oCmpSrv As SAPbobsCOM.CompanyService
                                                    Dim oReportLayoutService As SAPbobsCOM.ReportLayoutsService
                                                    Dim oReportParam As SAPbobsCOM.DefaultReportParams
                                                    oCmpSrv = auxCompany.GetCompanyService
                                                    oReportLayoutService = oCmpSrv.GetBusinessService(SAPbobsCOM.ServiceTypes.ReportLayoutsService)
                                                    oReportParam = oReportLayoutService.GetDataInterface(SAPbobsCOM.ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
                                                    oReportParam.CardCode = "-1"
                                                    oReportParam.ReportCode = oDocCode
                                                    oReportParam.LayoutCode = oDocLayOut
                                                    oReportParam.UserID = oUserID
                                                    oReportLayoutService.SetDefaultReport(oReportParam)
                                                Catch ex As Exception
                                                    MsgBox(ex.ToString())
                                                End Try
    End If
    Será esta validação que está a causar-me problemas?
    Pelo que viste do meu código, achas que estou a abordar o assunto da forma correcta?
    Muito Obrigado,
    Cumprimentos,
    Luis Duarte

  • IChat not connecting with most users

    Hi, I'm running Tiger and having trouble connecting to anyone but other Tiger users. I can't connect to PC users and I can also not connect, most importantly, with my dad who uses Panther.
    As an error, it says at my end that the other computer is unavailable or unreachable something like that and then at their end it says that I canceled my request. Strange, no doubt.
    I changed the Quicktime settings and did everything else in accordance with this thread, including opening the proper firewall ports (i have also tried with firewall off), I have no iChat add-ins and I connect to the internet directly to my cable modem. I had no problems under Panther.
    I have an up/down speed of 187Kbps/339Kbps, according to a test I just ran. Also, my dad, the one I really want to talk to, connects with a modem, so i thought maybe his connection was just too pokey to handle it (even though it used to work fine for us), but I have the same problem with broadband users.
    I have had this problem with every incarnation of 10.4.x

    My dad was online tonight so I had a chance to test it out...
    just says
    "there was a communication error during your chat"
    somewhere down in the report it says it ended with error -8
    here's the first header
    iChat Connection Log:
    AVChat started with ID 2111358753.
    adamsickmiller: State change from AVChatNoState to AVChatStateWaiting.
    0x5dceb50: State change from AVChatNoState to AVChatStateInvited.
    0x5dceb50: State change from AVChatStateInvited to AVChatStateConnecting.
    adamsickmiller: State change from AVChatStateWaiting to AVChatStateConnecting.
    adamsickmiller: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    0x5dceb50: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8

  • Connection to db fails from client if connecting with sqlplus user/ps@NAME

    Hi
    I have just installed Oracle client 11.2 on a linux server.
    When I connect with sqlplus apmr/******@apm
    I am getting:
    SQL*Plus: Release 11.2.0.2.0 Production on Thu Mar 29 11:11:17 2012
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    BUT, if I am connecting with /nolog and then insert user/password --> it success!!!
    Could anyone solve this mystery ? :-)
    sqlplus /nolog
    SQL*Plus: Release 11.2.0.2.0 Production on Thu Mar 29 11:12:20 2012
    Copyright (c) 1982, 2010, Oracle. All rights reserved.
    SQL> conn apmr_larisa@apm
    Enter password:
    Connected.
    Thanks
    Larisa

    884714 wrote:
    Thanks a lot for the response. I am getting the following error :
    java.sql.SQLException: Io exception: The Network Adapter could not establish the connection.Before asking you to get the help from your DBA, i would suggest to check couple of things like:
    1) Write a standalone program and check whether everytime you are getting connection. If answer is yes.
    2) Check whether in your web application do jdbc jar's are there (in lib folder) . If answer is yes. Check the version of jars. because the application first checks the dependant jars in application lib folder, if not found then it checks at classpath.
    So this might casuse a problem.
    If no luck after doing above steps, then i would suggest to ask the DBA, does DB goes down frequently? and show him that error. Because the error is pure say's SID is not up and running.

  • Getting error in Connection with SAP 2007 with SQL 2005

    Hi
    I am getting the error while running the Sample code of "UsingSBObob"
    Run-time error '-111
    Connection to SBO-Common has failed
    Please provide the solution

    Hi Owen
    You have to specify the SQL Server 2005 in the code so that you can connect with that. Below is the code
    Private Sub ConnectToCompany()
        '// Initialize the Company Object.
        '// Create a new company object
        Set oCompany = New SAPbobsCOM.Company
        '// Set the mandatory properties for the connection to the database.
        oCompany.Server = "CTX17\SQL2005" --- Specify the SQL2005 here
        oCompany.language = ln_English
        '// Use Windows authentication for database server.
        '// True for NT server authentication,
        '// False for database server authentication.
        oCompany.UseTrusted = True
        oCompany.DbServerType = dst_MSSQL2005  -
    New line to add in code
        ChooseCompany.Show vbModal, Me
    End Sub
    Himanshu

Maybe you are looking for