Installation Error unknown reason-18

I get this error message when trying to download certain apps or updates to certain apps from the market. There seems to be no reason for it, no pattern. Some apps (like StumbleUpon, Angry Birds Seasons, Schottgunn, etc) are giving me this problem. And after they fail to update, they don't reappear in my Downloaded section of the market so I don't know which apps on my phone won't be receiving any more updates.
This has been happening on both 2.3.340 and the version previous. Both the old market and new. Uninstalling market updates forcing an update did not work. Retrying repeatedly doesn't work. Trying hours, days, or weeks later doesn't help. I'm becoming quite frustrated.

I have provided some steps below that may help.
Step 1 – Ensure you are maintaining a good signal.
Step 2 – Complete a soft reset
- Power the device off
- Pull the battery out
- Place the battery back in
- Power the device back on
Step 3 – Clear the Market application data and cache (this will not remove downloaded applications)
Instruction article:
http://support.vzw.com/clc/devices/knowledge_base.html?id=34831
Step 4 – Try removing some of the applications that are not native to the device and re-downloading them.

Similar Messages

Installation Error: Unknown Reason-110

I can't install any apps. I keep getting the Error Code: Unknown Reason-110. I have restarted the phone. I have tried to switch settings around. But nothing seems to do it. Thank you for the help in advance.

Vichet_99,
Let's try a few other steps to see if we can get your Market working. In addition to clearing cache from the Market, also try clearing it from the Download Manager. Try the Market again.
Make sure your Background Data and Autosync are checked in Settings>Accounts & Sync.
Another thing I have seen affect some phones ability to download, is an issue with the SD card. Try going to Settings>SD & Phone Storage and unmounting the SD card. If it works with the SD card unmounted, I suggest deleting the file called android_secure from the SD card. You can find files on the SD card by connecting to your computer or using a file program like Astro File Manager.
Please let us know if still having issues.

Workspace Designer Error, unknown reason

When opening Dreamweaver CS4 receive the following two errors/alerts:
"XML parsing fatal error: Invalid document structure, line:1, file C:\Documents and Settings\400923\Application Data\Adobe\Dreamweaver CS4\en_US\Configuration\Workspace\Designer.xml
and
The following panel layout is missing or could not be read:
C:\Documents and Settings\400923\Application Data\Adobe\Dreamweaver CS4\en_US\Configuration\Workspace\Designer.xml
The application will not have a correct layout. Please load one from Windows->Workspace.
Then the system locks up and I cannot do anything. Please help!

Hi,
This forum is related to queries on the 'Adobe Community Help' application. Look at the Dreamweaver FAQ post on common problem, or, post your query on the Dreamweaver forum.
Regards,
Sandeep

HT1386 directory (harddrive) into my IPOD Touch 4. I get an unknown reason -50 error for their names during syncing attempts. 1 album is greyed names on my IPOD. What can I do?

I bought some mp3 music files from Amazon that will not sync from the Itunes directory onto my IPOD Touch 4. What can I do to get them to sync? I am getting a -50 unknown reason error message when the system tries certain songs. I also bought a whole album from Amazon in mp3s that downloaded to my Itunes directory, yet only shows up as greyed out on my IPOD. What can I do? Most of the rest of my songs have synced with the IPOD. I called Amazon's help line but they say I have to call Apple's help line, and it is just past the end of my year's service. I wondered if it was due to the new Amazon cloud software, but they claim it isn't since the songs play on my hard drive. I'd appreciate any suggestions.

Thanks for the information. I actually fixed my problem after many hours of experimentation in two different ways.
I found that when I filled in more information in the catalog about songs on mixture albums, I had to always check the COMPILATION box to have those songs sync correctly. Apple didn't say anything about that. Without the checkmark on each song in the compilation album, the song would cause a 50 error.
I also found that if I moved the problem songs (that caused the error 50 message) out of my Itunes Library and reimported them, that stopped them from causing the error 50. So I deleted them and reimported them into the library. I found that some of the songs in the Itunes catalog had showed weird locations with addresses like C:\\\documents and settings...instead of the real pathway that might have been C:\documents and settings.. Some pathway addresses had become corrupted for some reason in the information that my Itunes library stored. So when I reimported them into the ITunes library from another location, their pathways were fixed and they no longer caused the 50 error while syncing. I painstakingly identified each song that was failing and deleted each specific song to clear up the problems.
That said, I do appreciate this board and the fact that others are willing to take time to help other users. Much obliged.

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"

Xcode 3.2.3 is not working after installing on Mac 10.6.3?As when I start Xcode it is giving error"An unknown installation error occurred"
provide solution.

Well I didn't enter a hostname from my ISP, but I did need to enter as a Host Domain the sub-domain (CNAME) that we use for our server. Don't know all the proper terminology, but I hope that's clear enough to someone to help. As soon as I did that, it worked again.
Thanks for the tip,
W

Reason for Error "Unknown field type (28) encountered."

Hello,
I'm from Germany, so sorry for my English first.
I got the error "Unknown field type (28) encountered." when I run
a simple "SELECT * FROM system.functions" on my ADD-Database.
The solution for this problem is found in the KBA 2145730.
If I use the ADS DLLs v. 11.10.0.22 I got the error, but if I use the
ADS DLLs v. 9.10.0.35 everything is fine.
For solving other problems I think it would be better to use the newest
version, but in this case I can't. At this time it is not a problem, because
I can't find any real reason so that I must update for now, but nevertheless
I'd like to know, why this error occurs. What is type 28? Or (what real
would be great) can I make changes to my software, so that I can
avoid this problem? I hope you can help me with this "riddle" and wish
all of you a great day.
Greetings from Germany,
Gerit Freericks

For backwards compatibility the server will send different field types (i.e. char vs varchar, ansi vs unicode, etc).
The server determines this based on the ACE (Advantage Client Version). By swapping in new DLLs you are telling the server that you are running a newer client and it can send the newer field types etc for the system tables.
In addition to swapping the DLLs re-build the application with the new TDataSet (re-compile) and this should resolve your issue.
For the field types look at ACE.pas (or ACE.h) in the TDataSet (on the latest). It looks like 28 is an NMEMO (Unicode Memo field)

"An unknown installation error occurred" need help!!!

hey guys so i just recently restored my whole MBP. I ran the original disc, went into Disk Utilities, erased my HDD, installed OSX (10.6.8) and then ran the software updater. Everything is up to date. My only problem is that when i run the disc that came with all the bundled applications, it gives me this error "An unknown installation error occurred." I don't know whats going on and could use some help!
Much is appreciated!!

OK I have the scenario:
Thinkpad printing fine in den, not docked, using a wired / cable network connect etc..
1) Suspend machine, walk into office
2) Cold dock it with docking station with machine suspended
3) Unsuspend machine
4) Surf, need to print an invoice
5) Attempt to Print to normal network printer --> no
Attempted to print to Snagit virtual printer --> no
Attempted to print to Quicken vPrinter --> no
Attempted to print to 2nd network printer --> no
6) Can I open any defined Printer Properties pages in FF or TB --> no
7) "An error occurred while printing..." from FF 27.0.1
8) From TB 24.0, no error message, the print dialog opens and when I select print, the dialog box disappears like it's going to print and then no printouts.. and I do not get "An error occurred while printing.."
8) Time to reboot..
Something is not getting reinitialized properly. I keep all my stuff current and ever since version FF 27.0 and TB 24.x no dice. Im current at FF 27.0.1 and TB 24.3.0. Thanks.

Unknown reason for error code 36331 in DAC run

Hi,
While running full load i am getting following error
Can any one give me the solution
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_123 -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 01:41:19.126 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

HI Srini,
I had copied Src files from BIApps to informatica Src file
While running DAC11g full load, we are en counting some issues below is the error we are facing
ERROR CODE - Unknown reason for error code 36331
one more thing to consider, In DAC10g we give /Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SrcFiles as Informatica parameter path in DAC system properties but in DAC11g if i take same path no task is running, it is failing at first task only and no parameter file is generating.
But if i give dafault in that Informatica parameter path of DAC11g some tasks are running success and i am able to see some parameters generated in DAC PATH, but Default is taking
/Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters path for that location.
Informatica Server details are Success, Physical Data sorce are success.
I had copied SrcFiles and LkpFiles to informatica from BIApps.
ParameterDW and parameterOLTP are moved to /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters as well as Informatica Src folder
for one task below is the error
2013-02-07 21:50:17.515 Acquiring Resources
2013-02-07 21:50:17.517 Acquired Resources
2013-02-07 21:50:17.519 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 21:50:46.989 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software creator.

I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software manufacturer.

I am using a copy of a previous download of Acrobat XI, clicking the .dmg and then on the install package.
Originally, the Acrobat software was brought into the new computer by the Migration Assistant.
Does the install assistant need to be in the mix somewhere?

File Error: Unknown File - when doing save as

yet another variation on the file problems i am having.
opened an aotosave file and tried to 'Save project as",
wont do it, reports "File error: unknown file"
the same error i get often when trying to "save as" the original,
and the same error i get if i make a copy of the FCP file in the finer, open it and try to save it, it wont do it.....
so with the main sequence in my project getting lost ("not found"),
i now find that its almost impossible to make a backup that works....
anyone know about this SERIOUS FAULT.
i can think of no reason why it cant handle the most basic act of keeping assets attached to the program.
new computer, new drives, new everything..
i am now working really scared, when it loses the main sequence again (1 hour), the latest backup that might work could be anything from 1 - 5 days old, who knows, and there goes days of work...
======================================
FCP6
HDV captures.
Main sequence is prores render.
Files and media on one 750G drive in the Mac Pro box.
deleted all render files yesterday, now only about 15 there.
changed MP3 tracks to aif.
have done FCP resue often
have done permissions
have upgraded to 10.4.10

i now find that its almost impossible to make a backup that works....
anyone know about this SERIOUS FAULT.
i can think of no reason why it cant handle the most basic act of keeping assets attached to the program.
new computer, new drives, new everything..
Except that this issue is almost always totally unrelated to FCP at all.
Paulo has dome great anecdotal advice but this is usually a fiel permissions problem. No idea how it gets changed but you can run Disk Utility and repair permissions. Do it twice. then Get Info on your drive and see what the privileges are. Do the same for your FCP projects folders. Get info on your FCP project file itself.
You need to get this figured out before you invest any more time in editing.
bogiesan

File Error: Unknown file. - Importing problem

I recently had some problems getting my FCP 5.0.4 to launch. To make a long story short someone in this forum said that my version of FCP was out of date with my current Macbook Pro running 10.5.5. I found this a little odd because I've had this computer for over six months and have been running FCP the whole time without a single problem. Since funds are tight and I don't have the money upgrade I did some troubleshooting to see if I could make it work again.
I did remember that I had recently moved some of my older quicktime codecs into my library/quicktime folder and when I removed them I was able to launch and run FCP.
Now when I try to import files I'm getting a "File Error: Unknown file" error message. I am able to view all the quicktimes and am only able to import a few quicktimes. I have quicktimes from the last six years that I'm trying to import so there's a good variety of different codes that were used. But I am able to watch all of the quicktimes via Quicktime.
Any suggestions why I might be getting this problem? Any way to fix this without upgrading? Thanks

*I recently had some problems getting my FCP 5.0.4 to launch.*
The reason is because that version of for PPC Macs, and you have an Intel Mac.
*Someone in this forum said that my version of FCP was out of date with my current Macbook Pro running 10.5.5*
It doesn't matter which OS version is running. You need an Intel/UB version of FCP to run on a Intel Mac.
*Any way to fix this without upgrading?*
It's not a problem. It's an incompatibility. Because you have run it for some time without an incident is incidental to its incompatibility.

Installation error in invoking target 'agent nmhs'

Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size          1336624 bytes
Variable Size          922749648 bytes
Database Buffers     553648128 bytes
Redo Buffers          12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-Khaffaf

Hi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13.

Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?

Transaction failed for unknown reason (100) Unable to complete backup at this time. Does anyone know how to solve this issue?
Thanks.

The system is set up to backup files to the iCloud at the end of the day. This has ot happen for sometime now and the mesaage I get is the back up error.

Installation error for SAP NW 7.01 ABAP Trial version

Hi ,
I am trying to install SAP NW 7.01 Trial version on my local PC which runs on OS windows XP SP2.
I am getting following error while installation Process:
(May 24, 2009 12:40:08 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file D:\sapdb\NSP\log.txt for details.
(May 24, 2009 12:40:08 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/Amar/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/Amar/LOCALS1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Can anyone please suggest me how to overcome this error.?*
Thanks
Regards,
Amar Kamat
Edited by: Amar Kamat on May 24, 2009 12:49 AM

Hi ,
I am trying to install SAP NW 7.01 Trial version on my local PC which runs on OS windows XP SP2.
I am getting following error while installation Process:
(May 24, 2009 12:40:08 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file D:\sapdb\NSP\log.txt for details.
(May 24, 2009 12:40:08 AM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/Amar/LOCALS1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/Amar/LOCALS1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Can anyone please suggest me how to overcome this error.?*
Thanks
Regards,
Amar Kamat
Edited by: Amar Kamat on May 24, 2009 12:49 AM

I cannot send emails after latest update/release for "an unknown reason"

Sorry to duplicate, but the reply I got to my first question didn't help, and there didn't seem to be any follow up. So I am trying to be more specific. I can receive but not send emails. I have read the page of suggested Mozilla solutions (Cannot send messages), tried them all, to no avail. I have contacted Network Solutions. Everything checks out their end. Disabling my anti-virus software does not help. I can send messages from a cell phone. As an experiment, I downloaded Opera, and tried it. I can send messages from Opera. But I don't want to use Opera. I want to use Thunderbird. The exact error message I get when trying to send is... "The message could not be sent using SMTP server XXXXX for an unknown reason. Please verify that your SMTP server settings are correct and try again, or contact your network administrator." I'd be very grateful for help with this.

closing in favor of https://support.mozilla.org/en-US/questions/1037758
Also closed https://support.mozilla.org/en-US/questions/1037765

Installation Error unknown reason-18

Similar Messages

Maybe you are looking for