Installation error while installing weblogic 10.3.5 R1

while installing weblogic server(wls 10.3.5 R1) am getting the following error(this is the same error am getting while installing jdeveloper 11g), as am creating a new middleware home following error comes
the product maintanance level of the current installer (weblogic 10.3.5) is not compatible with the maintenance level of product installed on your system(wl 10.3.0). Please obtain the compatible installer or product maintainance on your current system to achieve the desired level.

It seems you have already installed wls 10.3.0 or somehow it exist in your system.
I suggest, uninstall the current Weblogic 10.3.0. And then reinstall 10.3.5 .
try something like below
Choose Start > Programs > Oracle WebLogic > Uninstall Oracle WebLogic.
clean the middleware folder if anything exist -> restart the server and then start installation again for wls 10.3.5.
Edited by: Nishith Nayan on Oct 9, 2012 12:17 AM

Similar Messages

Error while installing weblogic portal

I am getting the following error while installing weblogic portal 10.3.2 generic.jar on existing weblogic server 10.3.2 generic.jar installation on RHEL5 with jrockit mission control 3.1.2 as jdk.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at com.bea.plateng.common.ui.console.DelegateConsoleWidget.invokeWidgetCallback(DelegateConsoleWidget.java:200)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.onLeave(ConsoleInteractTask2.java:439)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.okNext(ConsoleInteractTask2.java:361)
at com.bea.plateng.wizard.WizardController.nextTask(WizardController.java:642)
at com.bea.plateng.wizard.WizardController.run(WizardController.java:519)
at java.lang.Thread.run(Thread.java:636)
Caused by: java.lang.NullPointerException
at java.io.File.<init>(File.java:239)
at com.bea.plateng.wizard.installer.diskspace.TempDir.<init>(TempDir.java:55)
at com.bea.plateng.wizard.installer.diskspace.TempDir.getInstance(TempDir.java:41)
at com.bea.plateng.wizard.installer.helpers.DiskSpaceHelper.checkDiscSpaceForProductInstallation(DiskSpaceHelper.java:255)
at com.bea.plateng.wizard.installer.helpers.ProductDirHelper.setStoreKeysAndValidateDiskSpace(ProductDirHelper.java:474)
at com.bea.plateng.wizard.installer.helpers.ProductDirHelper.validateAndSet(ProductDirHelper.java:278)
at com.bea.plateng.wizard.installer.console.tasks.ProductDirChooserConsoleTask.onLeave(ProductDirChooserConsoleTask.java:235)
... 10 more
anyone please help

I'm getting this error as well.
Did you resolve this problem?

CFGFWK-60850 Error while installing weblogic portal 10.3.5

I am getting below error while installing weblogic portal 10.3.5 configuration wizard for creating domain. Please help me resolve this issue.
OS: Windows 2008 64 bit
Installable file: portal103_generic.jar
This is the first weblogic installation.
Installtion command applied: java -d64 -jar portal103_generic.jar
Test JDBC data sources.
Data Source=cgDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=cgDataSource-nonXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=p13nDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceAlwaysXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceNeverXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Why I am getting this error ? How can i resolve this ?
Edited by: Prajeesh Kumar KM on Feb 25, 2013 12:26 AM

I'm getting this error as well.
Did you resolve this problem?

Memory Fault Error While Installing WebLogic

Hi,
I am getting Memory Fault error while installing weblogic on RHEL 5.2 (Tikanga). The file I am using to install weblogic is
server103_linux32.bin.
When I run command uname -a, following information is displayed:
Linux Machine1 2.6.18-92.e15 #1 DATE x86_64.
Some of you may think that I am using 32bit version instead of using 64bit as per my machine but On oracle website, there is only one
version available which is the one I am using.
Kindly help.
Cheers
Sunny

Kindly refrain from using a 32-bit installer on a 64-bit system. Kindly contact a Weblogic forum for more assistance.

Installation error while installing SAP NetWeaver ABAP Trial Verion 7.02

Hello,
I am getting the following installation error while installing SAP NetWeaver ABAP Trial Version 7.02 (90 days evaluation)
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log and C:\sapdb\data\wrk\MaxDBRuntimeForSAPAS_install_ _ .log.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL.
Below are the details of my system:
OS: Windows 7 Enterprise Edition (version 6.1.7600)
Processor: Intel(R) Core(TM) i5
System: 64-bit Operating System
Regards,
Tarun

hello,
I am getting the below error while intsatlling
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed: Unable to create node
cyber7be\sapmnt\ with type DIRECTORY: can't create parent node...). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/NW702/AS-ABAP/ADA/CENTRAL/.
os--windows xp-sp3. 32 bit
please help
thanks in advance
Edited by: sumzi_ks on Aug 27, 2011 4:09 AM

Installation error while installing KB2956166 march cumulative updates for sharpeoint server 2013

I am getting error while installing KB2956166 march cumulative updates for sharpeoint server 2013 on windows server 2012 R2.
i have already installed KB2956159 CU.
can you guide me what is best way to install it?
Thanks,
Deepak

Hi,
KB 2956159 - SharePoint Foundation 2013 March 2015 CU
KB 2956166 - SharePoint Server 2013 March 2015 CU
http://blogs.technet.com/b/stefan_gossner/archive/2015/03/10/march-2015-cu-for-sharepoint-2013-has-been-released.aspx
If you are using SharePoint server 2013, you need to install updates package for Server, i.e. KB 2956166.
Here is a similar issue:
http://sharepoint.stackexchange.com/questions/104495/undo-wrong-installation-of-sharepoint-2013-service-pack
If it doesn't help, you might refer to this article:
http://blogs.msdn.com/b/george_bethanis/archive/2014/08/28/sharepoint-server-2013-can-you-uninstall-patches.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Fetal error while installing weblogic server 12c on windows 64 bit

Dear all,
i have windows7 64bit, oracle 11g database, and my java version as i enter the JAVA -VERSION command at the cmd prompt is below
C:\Users\Administrator>java -version
java version "1.4.2_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_06-b03)
Java HotSpot(TM) Client VM (build 1.4.2_06-b03, mixed mode)i want to install weblogic server generic wls1211_generic.jar.
when i enter the command
java -Xmx1024m -jar wls1211_generic.jar
or
java -Xmx1206m -jar wls1211_generic.jar
it try to open the installation but give a fatal error like below
A fatal error occured, this application will terminate.
any idea?

Hi,
i did the same as you said, i.e i add this path to the PATH variable C:\Program Files (x86)\Java\jdk1.7.0
add the bin directory to this path, so you should have C:\Program Files (x86)\Java\jdk1.7.0\bintest it in the command prompt with java -version and it should prompt you java 1.7
also be sure the generic jar is not corrupted.
and one more thing you should use this command to install with generic jar:
java -jar wls1211_generic.jar
http://docs.oracle.com/cd/E24329_01/doc.1211/e24492/guimode.htm#autoId3
Regards
Carlos

Error while installing weblogic 6.0

Hi,
I am trying to install weblogic 6.0 on Solaris SunOS 5.6 Ultrasparc-60
solaris VM 1.2.1. could someone help me in this.
Below is the result of my installation.
TIA
Arun.
# sh weblogic600_sol.bin -i console
Preparing to install...
Error: failed
/tmp/install.dir.17096/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
because ld.so.1:
/tmp/install.dir.17096/Solaris/resource/jre/jre/bin/../bin/sparc/native_threads/java:
fatal: libCrun.so.1: open failed: No such file or directory

Mike,
Should i have to install jdk1.3 separately & run the installation. Is there
anyway i should specify the javahome for the weblogic installation.
Arun.
Michael Girdley wrote:
WebLogic 6.0 will install its own copy of the JDK using the install anywhere
wizard. WLS 6.0 requires JDK 1.3 to operate.
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Arun" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am trying to install weblogic 6.0 on Solaris SunOS 5.6 Ultrasparc-60
solaris VM 1.2.1. could someone help me in this.
Below is the result of my installation.
TIA
Arun.
# sh weblogic600_sol.bin -i console
Preparing to install...
Error: failed
/tmp/install.dir.17096/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
because ld.so.1:
/tmp/install.dir.17096/Solaris/resource/jre/jre/bin/../bin/sparc/native_thre
ads/java:
fatal: libCrun.so.1: open failed: No such file or directory

Error while installing weblogic server

Dear all,
i have install oracle database 11g r2 64bit on windows 7 64bit.
i download weblogic server ofm_rcu_win32_11.1.1.3.3_disk1_1of1.
i want to install it, i run the rcu from C:\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\BIN directory.
it give the following error
windows cannot find "C:download", make sure you type the name correctly.
why?

Hi Maahjoor,
this ofm_rcu_win32_11.1.1.3.3_disk1_1of1 is not the weblogic's installers, is RCU.
If you want to install Weblogic you don't need RCU, RCU has been made to create schemas which are needed for some types of installation like SOA suite, BI Publisher etc.
You can get Weblogic installer from this url:
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-for-dev-1703574.html
To install Weblogic you only need a JDK 1.6 or a JRockit 1.6
Hope this clarify your doubt :)
Regards
Carlos

Installation Error while installing UPK

Hi ,
I am new to UPK user and trying to install UPK for the first time and getting the below error while running setup.exe.
Error Code: -5001 : 0x80070002
Error Information:
SetupNew\setup.cpp (1220)PAPP:Software
PVENDOR:Oracle Corporation (http://www.oracle.com/support)
PGUID:E230DC0A-5C4B-4963-8320-067FF3AF722E
$17.0.717
@Windows Server 2003 Service Pack 2 (3790)
Please guide me on this.
I have created the same folder sequence as per Oracle guide , downloaded all language packs and .net framework.
The setup is not going ahead.
Thanks,
KKT

Hi KKT,
I would suggest maybe logging a Service Request with Oracle - it seems like it is not happy with your O/S version (albeit supported by most UPK versions...)
Good luck!
Regards,
Greig

Post installation Error while installing EBS 11i on Win server 2003

Hi All,
can soembody give the guidens to resolve the below error please....!!!
I have done the below steps while installing
I have been following the below steps to install the EBS 11i,
1.installed in Win20003 server edition
2.VC++ and copyind the link file into windows\system32,
3.GNU make done the path set everything,
4.MKS tool kit,
5IP config and installing MS loopback,
---------->I have not installed the JDK<--------
started the installtion direct from the DVDs,
Pre-Installtion everything was OK,
but after done everything I got struck last min, where the popup window appeared as login page responding but i did wait for 30 min and nothing has
happened.
So closed and I restarted the System and I have restarted process putting 1st DVD and given the command rapidwiz -restart.from command prompt.
and Again its started as a new installtion, and preinstatltion wizard has came.
Regards
Satya

Hi
Yes, this is only the file which i found and there is no other log file
after installtion i got a window in that the below information was popped up.
Please see the details below
Database Availability Check
command : cmd.exe /c D:\ORAPPSCONFIG\rapidinstall\bin\riwTDBup.cmd D:\oracle\visdb\9.2.0\VIS_ebs.cmd sqlplus D:\ORAPPSCONFIG\rapidinstall\bin\riwTDBup.sql APPS/APPS
D:\ORAPPSCONFIG\rapidinstall>echo off
Sun 08/31/2008
04:36 PM
ECHO is off.
ECHO is off.
Sun 08/31/2008 04:36 PM
VIS_ebs.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : D:\oracle\visdb\9.2.0"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : D:\oracle\visdb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;D:\oracle\visdb\9.2.0\bin;D:\oracle\visdb\9.2.0\jre\1.4.2\bin;D:\oracle\visdb\9.2.0\jre\1.4.2\bin;D:\MKS\bin;D:\MKS\bin\X11;D:\MKS\mksnt;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\PROGRA~1\MICROS~3\Common\Tools\WinNT;D:\PROGRA~1\MICROS~3\Common\MSDev98\Bin;D:\PROGRA~1\MICROS~3\Common\Tools;D:\VC98\bin;D:\GNUMAKE\make-3.81\WinRel"
" LD_LIBRARY_PATH : D:\oracle\visdb\9.2.0\lib"
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Aug 31 16:36:27 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
connect test returning code 0
ERRORCODE = 0 ERRORCODE_END
Database ORACLE_HOME connection test has succeeded
command : cmd.exe /c D:\ORAPPSCONFIG\rapidinstall\bin\riwTDBup.cmd D:\oracle\visora\8.0.6\VIS_ebs.cmd plus80 D:\ORAPPSCONFIG\rapidinstall\bin\riwTDBup.sql APPS/APPS
D:\ORAPPSCONFIG\rapidinstall>echo off
Sun 08/31/2008
04:36 PM
"The environment settings are as follows ..."
" ORACLE_HOME : D:\oracle\visora\8.0.6"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : D:\oracle\visora\8.0.6\bin;D:\oracle\viscomn\util\java\1.4\j2sdk1.4.2_04\bin;D:\MKS\bin;D:\MKS\bin\X11;D:\MKS\mksnt;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\PROGRA~1\MICROS~3\Common\Tools\WinNT;D:\PROGRA~1\MICROS~3\Common\MSDev98\Bin;D:\PROGRA~1\MICROS~3\Common\Tools;D:\VC98\bin;D:\GNUMAKE\make-3.81\WinRel"
" LD_LIBRARY_PATH : D:\oracle\visora\8.0.6\lib"
SQL*Plus: Release 8.0.6.0.0 - Production on Sun Aug 31 16:36:31 2008
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.5.0 - Production
connect test returning code 0
ERRORCODE = 0 ERRORCODE_END
Apps ORACLE_HOME connection test has succeeded
Environment File Check
Database ORACLE_HOME environment file passes instantiated variables test:
File = D:\oracle\visdb\9.2.0\VIS_ebs.env
Apps ORACLE_HOME environment file passes instantiated variables test:
File = D:\oracle\visora\iAS\VIS_ebs.cmd
iAS ORACLE_HOME environment file passes instantiated variables test:
File = D:\oracle\visora\8.0.6\VIS_ebs.cmd
APPL_TOP environment file passes instantiated variables test:
File = D:\oracle\visappl\VIS_ebs.cmd
ADOVARS environment file passes instantiated variables test:
File = D:\oracle\visappl\admin\adovars.cmd
APPSCONFIG passes instantiated variables test:
File = D:\oracle\visappl\admin\adconfig.txt
DBC File Check
DBC file passes instantiated variables test:
File = D:\oracle\visappl\fnd\11.5.0\secure\VIS_ebs\vis.dbc
HTTP Check
checking URL = http://ebs.orapps.com:8000
Portal is responding
JSP Check
checking URL = http://ebs.orapps.com:8000/OA_HTML/jsp/fnd/fndhelp.jsp?dbc=D:\oracle\visappl\fnd\11.5.0\secure\VIS_ebs\vis.dbc
JSP is responding
PHP Check
checking URL = http://ebs.orapps.com:8000/OA_HTML/US/ICXINDEX.htm
* Login Page is responding*
after above message nothing was happened and I closed this window and restarted the PC and giave the commance rapidwiz -restart from command window from rapidwiz directory from 1st DVD.
regrds
Satya
Edited by: user650092 on Sep 2, 2008 7:16 AM

ISScript installation error while installing Oracle B2B editor.

Hi,
I am trying to install Oracle B2B on Windows 7 but getting an error saying that
"ISScript installation error.InstallProduct,PackagePath,PropertyValues"
What could be the reason ? Plz help me.

Are you createing DB also???

Unrecoverable Installation Error while installing CUPS 10.5

Hi community,
the next great issue at this installation:
See the attached screenshot, i´m running into an unrecoverable error within the installation routing from CUPS 10.5 on a UCS-Server, BE6k.
It happened several times, i did:
Remove the machine completely from ESX
Deployed freshly the OVF for that persence server (cucm_im_p10.5_v8_v1.0.ova, also fresh downloaded from cisco)
Choosed "BE6K for 1000 Users" in that following dropdownmenu
Installed four times with the included ISO, whoch i mounted in that fresh machine
Tried two times already with the freshly downloaded and modified to bootable UCSInstall_CUP_10.5.1.12900-2.sgn, to save me time for updating it or avoid errors with the .ISO file on the datastore. BTW with checking media i couldn´t find any problems on the included one, also not the modified one. Both should work fine.
In any case i run in that error, several times, after quite a while having to wait for installation routine. Very frustrating...
Has perhaps anyone some ideas how to handle that problem? First time i encountered such an error, and i did some Presence-Installations before. No idea whats wrong.

Hi,
I face the same issue and I don't know what is happening.
is it the first time you install CUPS in this cluster ? or you are recovering the CUPS ?
the first time I install the server, I didn't face any issue. when I tried to install the same server for the 2nd time, it didn't complete.
I think it is a bug with this image.
One more thing, try to change the hostname of the CUPS in CUCM pub, and reinstall the server.
HTH
Anas
don't forget to rate the helpful posts

Installation Error while installing 10g R2 on RHLE 4

Hello All,
I am trying to install Oracle 10g r2 10.2.0.1 on RHEL 4 on VM Ware. While running Installer I am facing the following error. Any help would be appreciate.
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP
address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Regards,

As the error suggests , you should have a static IP for your machine.
Database will work properly but you might have issues with OEM and accessing it from outside.
Regards
Rajesh

ODI installation error while installing Public Services

Hi All,
I was trying to install ODI 11.1.1.7 after downloading the setup files from e-delivery.
During the installation of Public web services, the setup prompts an error saying " stage\components\oracle.odi.webservice .......filegroup2.jar" is cannot be found.
I checked my extracted files and found out that it was not present there.
Am I missing out anything or it is part of the odi companion files ?

The issue is actually with the setup files available on e-delivery. If you download the ODI setup available under EPM 11.1.2.3, the webservices, agent etc files are missing from the setup. First observation is the overall size of file is 1.7 GB which includes files from both Disk1 & Disk 2.
For whole setup, download the setup from the ODI download page or from Oracle Business Intelligence page on e-delivery. In both the cases, whole setup is split into 2 disks of 1.7 and 1.1 GB respectively. After downloading them I did not face any issue.

Installation error while installing weblogic 10.3.5 R1

Similar Messages

Maybe you are looking for