Installation Error with 10.1.3.1 on Red Hat Linux 4

Hi,
I am installing Oracle Application Server 10.1.3.1 on Red Hat Linux 4, and am receiving the following error:
Error in invoking target install of make file ins_sqlplus.mk. If I hit 'Ignore', I continue to receive errors regarding the makefile, and the configuration assistants fail.
What do I need to do to avoid getting this error? I am having a lot of trouble getting this installation to work successfully.
Thanks in advance for the help,
Nora

Hi Nora,
Just read pre-install steps well. I think you 're missing a couple of libraries at your OS.
So the only thing as I mentioned check pre-install steps or download pre-install script for AS9.0.4
https://metalink.oracle.com/metalink/plsql/f?p=130:14:4077412560366893878::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,270683.1,1,1,1,helvetica
The output will help you to determine what you are missing.
one more thing check your ENV & swap
Hear from you & regards,
Hamdy

Similar Messages

Help with installing pre-requisite packages on Red Hat Linux

Having issue with installing packages with yum
OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
uname details as follows
2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Example error: yum install gives error as follows for all packages.
No package compat-libcap1-1.10-1 available
Need to install following packages (as mentioned in the prerequisites)
binutils-2.20.51.0.2-5.28.el6
compat-libcap1-1.10-1
compat-libstdc++-33-3.2.3-69.el6 for x86_64
compat-libstdc++-33-3.2.3-69.el6 for i686
gcc-4.4.4-13.el6
gcc-c++-4.4.4-13.el6
glibc-2.12-1.7.el6 for x86_64
glibc-2.12-1.7.el6 for i686
glibc-devel-2.12-1.7.el6 for i686
libaio-0.3.107-10.el6
libaio-devel-0.3.107-10.el6
libgcc-4.4.4-13.el6
libstdc++-4.4.4-13.el6 for x86_64
libstdc++-4.4.4-13.el6 for i686
libstdc++-devel-4.4.4-13.el6
libXext for i686
libXtst for i686
FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.

Hey,
Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
Let me know if this is what are you looking for.
I hope it helps you,
Thiago Leoncio.

Installing issues with Oracle Database 11g R1 on Red Hat Linux

Hi,
I am installing Oracle Database 11g on Red Hat Linux.
Version of the OS:Linux 2.6.9-5.ELsmp #1 SMP Wed Jan 5 19:30:39 EST 2005 i686 i686 i386 GNU/Linux
I have installed XManager on my PC to access the runtime installer in Graphical mode.
But once i click the installer file from Xmanager, it asks if the user wants to run it in terminal or simply run.
I selected the run in terminal and it starts the terminal where the initial pre-requisite checks are done i.e swap memory,temp and display.
The screen disappers and the graphical OUI never turns up...
Any pointer would be helpful.
Regards
Prabal

Try the following:
1. logon to the linux using root and issue the following command - xhost+
2. Open xterm in the Xmanager and logon to the linux using oracle user.
3. in the installation directory issue ./runInstaller.
Oded
[www.dbsnaps.com]
[www.orbiumsoftware.com]

Installation Problem Oracle 9.2.0.4 on Red Hat Linux 5

I have installed Red Hat Enterprise Linux 5. I want to install Oracle 9i (9.2.0.4) Server.
I have created oracle user and set oracle home directory in the .bash_profile.After that i run runinstaller file but the message comes as below..
'The user is root. Oracle Universal Installer cannot continue installation if the user is root. No such file or directory.
Please tell me the actual solution.
- Prasanta

First of all, as pointed out by Hans, make sure you perform the installation with the oracle user, not root.
Next, you should be aware that installing Ora9iR2 on RHEL5 is neither supported nor planned, so you must be aware you will be on your own. There is no official procedure to install 9i on RHEL5, however, considering you will use this for personal purposes, not production, you can attempt the procedure provided by Ivan Kartik --> Oracle 9i on RHEL 5.
~ Madrid
http://hrivera99.blogspot.com

Oracle Linux 6.2 with RH compatible kernel .versus. Red Hat Linux 6.2 diff?

Hello everyone
* assume that I booted Oracle Linux 6.2 with a Red Hat Compatible Kernel - as opposed to booting the Oracle Linus 6.2 with UEK R1 or UEK R2 kernels *
I am interested in any feature differences between the two OS relating to: functionality, reliability, performance, stability and tools.
The reason I ask is that my employer is trying to figure out if OL 6.2 with a RH compatible kernel is identical to the RHEL 6.2 OS, if we excluded the Oracle UEK and Oracle clustering extra functionality.
This OS will not be used to run Oracle 11g R2 database, this is to be used for any other Linux based non-database applications (such has running Java, JDBC, Apache, C/C++, etc).
many thanks
Yuri

yurib wrote:
So now I can tell them to use Oracle Linux 6.x with a RH compatible kernel for all those non-DB systems and use OL 6.x with UEK for Oracle 11g database.
And I remember there was (still is?) a third kernel, which does not contain new features or performance enhancements, but only bug fixes for the RH compatible kernel.
I am not sure if you are going to need it, but it can be very useful in some cases. For example, if there is a bug in the RH kernel, and you don't want to run the UEK line as you want to stick to 100% strict RHEL compatibility, then Oracle can put the fix into this 3rd bug-fix only RH compatible kernel series.
(For me, I've set up dual-boot UEK & standard RHEL kernels on my machines and never have never encountered issues or bugs.)
>
Many thanks, as always
Yuri

Error in Oracle10gr2 installation on Red Hat linux AS4 (64-bit) itanium2

Hello All,
I installing oracle10R2 on Red Hat Linux 4 U4 Enterprise Server but got the following errors:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer
from /tmp/OraInstall2007-04-26_11_11AM. Please wait....
[oracle@rx36 database]$ #
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGILL (0x4) at pc=0x2000000000038a4070, pid=6102, tid=2305843009216825632
# Java VM: Java HotSpot (TM) 64-Bit Server VM(1.4.2_10-b03 mixed mode)
#Problematic frame:
What should I do?
Thanks.
Message was edited by:
user571878

Hi,
Please refer to following statement to do:
=============
How to install Oracle RDBMS version 10.2.0.2 (or higher)
To install 10.2.0.1 and then 10.2.0.2 (or higher) on Linux Itanium, do the following :
[1]. Download Patch 5390722 and run the supplied OUI to install Montecito JDK and JRE into the new 10.2 home
* Unzip the patch
* Start OUI from Patch 5390722 and install JDK into the new 10.2 home
* Start OUI from Patch 5390722 and install JRE into the new 10.2 home
[2]. Install 10.2.0.1 into the new 10.2 home by running OUI from the 10.2.0.1 DVD :
./runInstaller -jreLoc $ORACLE_HOME/jre/1.4.2
NOTE: During the installation (on the "Product Specific Prerequisite Checks" page) the "Checking for Oracle Home incompatibilities..." check will fail. Click the check box next to it, so that the status changes to "User Verified", and continue with the installation.
[3]. Install 10.2.0.2 (or higher) into the new 10.2 home by running OUI from where the patchset has been unzipped :
./runInstaller -jreLoc $ORACLE_HOME/jre/1.4.2
Terry

Failed Installation of Oracle8i on Red Hat Linux 7.0

Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.
null

Richard,
It's a glib problem. 8i uses the glib 2.1 libraries, while RH7 uses the 2.2. There is a patch available from oracle support, or you can find a solution that has worked for me twice on the otn discussion forum.
Cory Franzmeier
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Richard Yip ([email protected]):
Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.<HR></BLOCKQUOTE>
null

Error messages when trying to install Essbase 11.1.1.3 on Red Hat Linux 5.3

Hello,
I'm having an error message while trying to install EPM 11.1.1.3 on Red Hat Linux 5.3 (32-bit).
It happens when I click "Next" for the installation to begin:
Error: Linux File Service Initialization Failed. Turn on the System property 'EnableLinuxPPKLogger' for more stack trace details
Error: Linux System Util Service Initialization Failed. Turn on the System property 'EnableLinuxPPKLogger' for more stack trace details
Exception in thread "Thread-7" java.lang.NullPointerException
at com.ibm.wizard.platform.linux.utils.UnixShellInterface.shutDown(Unknown Source)
at com.ibm.wizard.platform.linux.LinuxFileServiceImpl.cleanup(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.close(Unknown Source)
at com.installshield.wizard.service.ServiceFactory.shutdownService(Unknown Source)
at com.installshield.wizard.service.LocalWizardServices.shutdown(Unknown Source)
at com.installshield.wizard.service.LocalWizardServicesManager.shutdown(Unknown Source)
at com.installshield.wizard.service.LocalWizardServices.shutdown(Unknown Source)
at com.installshield.wizard.Wizard.shutdownServices(Wizard.java:648)
at com.installshield.wizard.Wizard.exit(Wizard.java:583)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1848)
Many thanks for your help.
Best regards,
Andy

Hi John,
I get the error messages once I click on "Next" from the "Confirmation" window.
I've extracted:
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:19 commonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 essbaseAddins
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:20 essbase_administration_services_webapp
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:19 essbase_integration_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:16 essbaseProductCommonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:21 essbase_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:17 essbase_smartsearch_webapp
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:17 essbase_studio_services
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 productCommonComponents
drwxr-xr-x 3 hyperion hyperion 4096 Jul 24 04:18 tools
For the Essbase installation.
Thanks for your help.
Best regards,
Andy

BI 4.1 installation in Red hat Linux 6.5

Hi Experts,
we are planning to have one cluster environment in Red hat Linux 6.5.
1) Two nodes in cluster ( two red hat Linux 6.5 servers)
2) 1 server with Websphere as a web application server.
From the last two years i am completely working on windows environment. hence i would like to know few details about installing BI 4.1 in RHL 6.5.
What are the prerequisites to install Bi 4.1 in RHL 6.5, Even though it mentioned in installation guides, i would request someone to share there real time expertise.
I would like to have split deployment in the webapplication server ( Websphere ).I have performed the split deployement with ref of the below document which was created by James Rapp Improving the User Experience in SAP BI Platform - BI 4.1 and Apache 2.4 Supplement
it completely talks about tomcat+ Apache.
is it possible to perform the websphere + Apache split deployment.
Kindly share your expertise.

Hi Prasad,
Below are my thoughts on your queries.
1. Check Installing SAP BI 4.1 SP01 on Red Hat Enterprise Linux 6.x Step-by-step. This is an amazing blog by Brian. Hope you find it useful.
2. You cannot do a split deployment with Apache and Websphere. However you can do it with IHS (Web server provided by IBM) plus websphere. If you are using Websphere Network deployment version, IHS must be installed by default. For performing the split deployment, check https://websmp206.sap-ag.de/~sapidb/011000358700000171102014E/sbo41sp3_bip_wapd_unix_en.pdf See section 4.4.2 on page 27
Hope it helps.
Regards
Chinmaya

Oracle 10g Installation on Red Hat Linux

Hi
I am trying to install Oracle 10g (Downloaded from Oracle Site) in a Linux Installation. I have checked with the following command about the Linux Version
# cat /etc/issue and the output is :
Red Hat Linux Release 7.1 (Seawolf)
Kernel 2.4.2-2 on an i686
Then I am giving #uname -r and the output is
2.4.2-2
Now Oracle Installation Guide for 10g for Linux is saying that
if the errata level is less than 25 on x86 system then install latest Kernel Updates.
Please Let me know from where I can get the Latest Kernel Updates appropriately and what I need to do to put that patch into Linux so that I can smoothly install the Oracle 10g.
Thanks and regards.
Keshav Tripathy

Jer is absolutely right.... just changing the values in oraparm.ini to reflect your kernel distribution will work for you.
For example the file contains:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3
now to add your linux into it just check your version by issuing the command #uname -r
in my case the output was "2.4.20-8smp". I just appended redhat before this value and entered in the oraparm.ini file.
The new ini file looks like:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3,redhat-2.4.20-8smp
[Linux-redhat-2.4.20-8smp-optional]
TEMP_SPACE=80
SWAP_SPACE=150
MIN_DISPLAY_COLORS=256
Now you are all set to install. I assume that all other pre-requisites have been fulfilled.
Thanks & Regards,
Rajesh Kumar
Team Lead UNIX

OCCI compilation issue with gcc-3.2.3 on Red Hat ES 2.1

Hello,
If I use OCCI of Oracle 10g and try to compile it with gcc-3.2.3 on Red Hat ES 2.1, I get linking errors.
The same works if I try to compile OCCI on Red Hat ES 3.0.
Any clues about how to compile the OCCI on RedHat ES/AS 2.1?

Yes, I downloaded the OCCI for gcc-3.2.3.
As I said it works on Red Hat 3.0.
I want to compile it on Red Hat ES 2.1.
I have installed gcc-3.2.3 on Red Hat ES 2.1. But the occi compilation wont succeed onto it.

Installation of Oracle EBusiness Suite 11i Release 10.2 on Red Hat Linux

Hello there,
It would be great if someone can help me with these questions
1. Which version of Red Hat Linux is suitable for installation of Oracle EBusiness Suite 11i Release 10.2.
2. I am downloading the EBS files from eDelivery site on my machine (Windows based). These are Zip files. How would these be usable on Linux machine?
3. Do I need stuff like MKS Toolkit on Linux? We tried installing on Windows 2003 server but had to abandon because we don't have MKS Toolkit. Is there some such pre-requisite on Linux?
Thank you.
Rahul

Copy all zip files to say /data/stage11i then unzip all files (as root) the process will create the correct file structure, you do not need to run adautostge.pl then in a terminal screen go to /data/stage11i/Disk1/rapidwiz and then type ./rapidwiz the installation wizard then guides you through the rest of the way. Run raoidwiz as root if you need multi user or for the demo single user run rapidwiz as oracle. Make sure you have created user and group for oracle and applmgr, also make those changes in the wizard it often defaults to say user oravis group dba. In linux you should have created localhost.localdomain sometimes the eth0 does not start, stop it in the device manager and then reactivate. Hope that helps.

Installation of EBS 11.5.9 on Red Hat Linux AS 4 fails

I am trying to install Oracle Applications 11.5.9 on Red Hat Linux AS 4. During pre-installation test , it is failing in two test viz. File Space Check and Writing Permissions....and saying insufficient privileges....I am trying to install with user root after creating two required users. What could be the problem?

do the follwong as root
chown ur_user:ur_grop /path where are u installing for both users and try again, the users you create must be the woner for the directroy u r installing under alos run
chmod 777 /path
fadi hasweh
http://oracle-magic.blogspot.com/
Oracle is not Magic, it just takes years of experience

Memory Problem with Oracle10g R2 and red Hat linux 2.4.21-37.EL

Hi All.
i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
when i check the free meory it shows only 12mb of ram is free..why..?
and in swap space it's only 200mb is used...why..?
when i check the dbwither is taking 1.2GB of RAM why..?
can anybody help me in this ...how to get free memory or configure os level to get more free memory.
Sarit
[email protected]

Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
You can see your swap partition being used as the swap space with:
cat /proc/swaps
Regards,
Senthil Murugan

Error message while installing JDK on RED HAT - linux interprise 5

Hello!
I have got an error message while installing JDK on RED HAT - linux interprise 5:
[user@localhost Desktop]$ cd jdk-6u22-linux-i586-rpm.bin ./jdk-6u22-linux-i586-rpm.bin
bash: cd: jdk-6u22-linux-i586-rpm.bin: Not a directory
[user@localhost Desktop]$ ./jdk-6u22-linux-i586-rpm.bin
Unpacking...
Checksumming...
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP ([email protected]).
inflating: jdk-6u22-linux-i586.rpm
inflating: sun-javadb-common-10.5.3-0.2.i386.rpm
inflating: sun-javadb-core-10.5.3-0.2.i386.rpm
inflating: sun-javadb-client-10.5.3-0.2.i386.rpm
inflating: sun-javadb-demo-10.5.3-0.2.i386.rpm
inflating: sun-javadb-docs-10.5.3-0.2.i386.rpm
inflating: sun-javadb-javadoc-10.5.3-0.2.i386.rpm
error: can't create transaction lock on /var/lib/rpm/__db.000
Installing JavaDB
error: can't create transaction lock on /var/lib/rpm/__db.000
Done.
What is the problem?
Thanks!

Good point.
Moderator action: thread locked.

Installation Error with 10.1.3.1 on Red Hat Linux 4

Similar Messages

Maybe you are looking for