Installation Evaluation version when waiting for licence

hello
I want to install evaluation version for my customer
But it doesnt work
He need to use it now and we didnt recieve the licence yes
Thanks

More information, please:
Operating system?
CC or CS6?
Exactly what do you mean when you say, "It doesn't work?"

Similar Messages

Flicker footage in Premiere Pro CC 2014.2. Tested on different computers. When waiting for fixes this bug?

Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different. Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
It can occur even in the parts without filters !!! But no all time.
ver 2014.2 - win 7 - intel i7-4770 - gtx 770 - flicker!
ver 2014.2 - win 7 - intel i7-4770 - Intel HD Graphics 4600 - flicker!
ver 2014.2 - win 7 - intel i7-2700K - quadro 2000 - flicker!
MERCURY PLAYBACK ENGINE work fine! But still flickering in preview and render.
When waiting for fixes this bug?

Hi Aleksey,
Flicker appears solely the fault of Premiere Pro CC 2014.2. Tested on different computers. Used as nVidia Quadro and GeForce GTX770. Drivers were different.
Have you tried with the Mercury Playback Engine set to "Software Only?" More info please: FAQ: What information should I provide when asking a question on this forum?
Everywhere equally evident flicker. Incidentally, it defies logic and may occur at different film pieces. If re-render that flicker may occur on another spot in the video.
Is this a brand new project or one you updated from an earlier version? What kind of footage are you exporting? Which preset are you using?
When waiting for fixes this bug?
If I can repeat the case here with the same hardware, GPU, and drivers, that would be easier to fix the bug. Currently, I cannot recreate the bug. If you or anyone else can provide me with steps to recreate the bug, that would help immensely. It sounds like this will be the difficult thing.
Thanks,
Kevin

4.4 for S5000H out ... When waiting for S6000H?

4.4 for S5000H out ... When waiting for S6000H?

Gamemaker1 wrote:
I have also asked the admin of lenovo-forums.ru (his nickname is "steaven") and he said that there will be no updates:
link
For the record the forum linked to is not owned or administered by Lenovo.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Why does Lightroom 4.3 use very high cpu when waiting for user to click OK?

I saved metadata for 52 photos.
Lightroom 4.3 couldn't save metadata for 2 of the photos and opened a window to tell me so. (It had no problem saving metadata on second attempt.)
While it waited for my response and wasn't doing any work, it was using over 50% of my CPU.
Why?
Windows 7 is 32-bit Professional.
Processor: Intel Core i5 750 Processor 2.66 GHz
Here's my system info as reported by Lightroom.
Lightroom version: 4.3 [865747]
Operating system: Windows 7 Business Edition
Version: 6.1 [7601]
Application architecture: x86
System architecture: x86
Logical processor count: 4
Processor speed: 2.7 GHz
Built-in memory: 3579.4 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 710.9 MB (99.1%)
Virtual memory used by Lightroom: 847.9 MB
Memory cache size: 2.0 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080
Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.3
Library Path: D:\Users\Calvin\Pictures\My Lightroom\lightroom\lightroom4\lightroom4.lrcat
Settings Folder: C:\Users\Calvin\AppData\Roaming\Adobe\Lightroom
Adapter #1: Vendor : 10de
    Device : 640
    Subsystem : c9593842
    Revision : a1
    Video Memory : 1007
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
Direct2DEnabled: false
GL_ALPHA_BITS: 0
GL_BLUE_BITS: 8
GL_GREEN_BITS: 8
GL_MAX_3D_TEXTURE_SIZE: 2048
GL_MAX_TEXTURE_SIZE: 8192
GL_MAX_TEXTURE_UNITS: 4
GL_MAX_VIEWPORT_DIMS: 8192,8192
GL_RED_BITS: 8
GL_RENDERER: GeForce 9500 GT/PCIe/SSE2
GL_SHADING_LANGUAGE_VERSION: 3.30 NVIDIA via Cg compiler
GL_VENDOR: NVIDIA Corporation
GL_VERSION: 3.3.0
OGLEnabled: true
OGLPresent: true
GL_EXTENSIONS: GL_ARB_arrays_of_arrays GL_ARB_base_instance GL_ARB_blend_func_extended GL_ARB_clear_buffer_object GL_ARB_color_buffer_float GL_ARB_compatibility GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_layer_viewport GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_geometry_shader4 GL_ARB_get_program_binary GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_separate_shader_objects GL_ARB_shader_bit_encoding GL_ARB_shader_objects GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_buffer_object GL_ARB_texture_buffer_range GL_ARB_texture_compression GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_viewport_array GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_bindable_uniform GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXTX_framebuffer_mixed_formats GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_geometry_shader4 GL_EXT_gpu_program_parameters GL_EXT_gpu_shader4 GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_latc GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_shared_exponent GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KHR_debug GL_KTX_buffer_region GL_NV_blend_square GL_NV_conditional_render GL_NV_copy_depth_to_color GL_NV_copy_image GL_NV_depth_buffer_float GL_NV_depth_clamp GL_NV_ES1_1_compatibility GL_NV_explicit_multisample GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_framebuffer_multisample_coverage GL_NV_geometry_shader4 GL_NV_gpu_program4 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_coverage GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_parameter_buffer_object GL_NV_parameter_buffer_object2 GL_NV_path_rendering GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_shader_buffer_load GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_expand_normal GL_NV_texture_multisample GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_transform_feedback GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_buffer_unified_memory GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_NVX_gpu_memory_info GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum GL_WIN_swap_hint WGL_EXT_swap_control

I don't think so.
I have enough experience with LR to know what to expect for various activities.
Previews for all photos had been rendered long before I initiated the Save Metadata.
Metadata for 50 of the 52 files had already been written.
The high cpu had gone on for at least 5 minutes.   I switched to another app imediately after initiating the Save Metadata for the 52 files and only went back to LR when I heard my CPU fan running for a long time.
When I got back to LR, I saw the "Could not save metadata" window. I clicked "Show in Library" and OK. As soon as I did that, CPU usage went back to normal.
I've experienced the exact same scenario, where LR can't save metadata for all photos and I've never had LR get stuck consuming a very large amount of CPU.
As a test, I selected 118 other photos, changed metadata for all of them and then selected all and saved metadata. LR took about 20 seconds to save metadata for all 118 and LR CPU usage never went above 17%. The difference is that LR did not show the "Could not save metadata" window.

PIII Celeron hangs or reboots when "Waiting for UDev uevents to be..."

Hello
I want to mention that the only way I can boot a Linux kernel on this machine is adding "no-hlt" option. Additionally the Arch installation image reboots shortly after the boot loader's menu is printed, perhaps due to requesting the "no_hlt" instruction.
So I placed the contents of Arch installation LiveCD on the hard drive and installed GRUB using Knoppix.
The problem is that when Arch installation image boots the system hangs or reboots on this stage: "Waiting for UDev uevents to be prcessed", or here with debug option. Sometimes it hangs 3 lines earlier, but more often it reboots.
So it's hard to recognize the exact reason of the issue.
May be I need to bypass some uevents? Or there are some failsafe boot options of Arch installation image?
What can you recommend?
Last edited by AleXoundOS (2011-11-25 18:51:01)

AleXoundOS wrote:
Hello
I want to mention that the only way I can boot a Linux kernel on this machine is adding "no-hlt" option. Additionally the Arch installation image reboots shortly after the boot loader's menu is printed, perhaps due to requesting the "no_hlt" instruction.
So I placed the contents of Arch installation LiveCD on the hard drive and installed GRUB using Knoppix.
The problem is that when Arch installation image boots the system hangs or reboots on this stage: "Waiting for UDev uevents to be prcessed", or here with debug option. Sometimes it hangs 3 lines earlier, but more often it reboots.
So it's hard to recognize the exact reason of the issue.
May be I need to bypass some uevents? Or there are some failsafe boot options of Arch installation image?
What can you recommend?
can someone help with this?

Tryout of *current* version while waiting for CS3?

I'm an InDesign and Illustrator user who may be
picking up Dreamweaver (either individually or as part of one of
the new suites) when CS3 comes out. I'd like to try learning it at
home before I have to use it at work. I notice there's no Tryout
version, and that the Dreamweaver web site says that a Tryout
version will be available 6-8 weeks after CS3 is released.
Is there any way to get a hold of the
current version as a Tryout? That way I could learn how to
use it while waiting for the new version to arrive.
Thanks.

No. But I'll whip one up for you....
Always use document relative links unless you have a good
reason not to.
GOOD REASONS
1. Document relative links don't work
2. You are using include files that link to pages at a
variety of folder
locations in the site
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DC_Eric" <[email protected]> wrote in message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> > #included file is in a subdirectory but the files
that #include it
> > aren't,
> > so
> > the relative locations are off.
>
> Always use root relative links for things like this.
>
> Murray do you know of a post or have a reference when
one should use links
> relative to the site root vs relative to the document?
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "lom2" <[email protected]> wrote in
message
> news:[email protected]...
> > Thanks for everyone's replies. Yes I contacted
customer service and they
> > gave
> > me the link that DC_Eric provided. I'm playing with
Dreamweaver now.
> >
> > Good advice about learning the theory before the
tool, but I've done web
> > development before. I'm not a total noob. :-)
> >
> > Version 8 seems pretty slick. The only problem I'm
having is that the
> > Link
> > Checker thingy is screwing things up with a PHP
#include file because
> > the
> > #included file is in a subdirectory but the files
that #include it
> > aren't,
> > so
> > the relative locations are off.
> >
> > But I suppose I just need to read the manual. LOL.
> >
> > Thanks again.
> >
>
>
>
>
>
>

NIScope CPU usage 100% when waiting for trigger

Hello, I'm using a NI 5102 DAQ card and want to acquire single bursts. However when the Multi Fetch.vi is waiting for a trigger (and this can be up to a minute) the CPU usage goes up to 100 %. Is there any way to overcome this?
Attachments:
Current_ProjectSWEEP2withoutAgilentNEWScopeWrite_to_FilePOSTED.vi ‏98 KB
ScopeSUB.vi ‏108 KB

Yea, Ive noticed the same thing. The niSope dll in the Fetch.vi grabs 100% CPU if timeout is larger than 1 or 2 seconds.
Has anyone talked to NI about this? The problem is in that dll which is polling the PCI Scope Card. That dll is not giving back any CPU if it waits for more than a second or two.
John Dailing
[email protected]

Random "Error 28" when waiting for SRQ

I have written a VI Server to communicate with a device. It runs for some random amount of time when it gets Error 28 while waiting for an SRQ. There are three ways to check for an SRQ from the device, they all return error 28. I cannot find Error 28 documented. Any ideas?

Hello,
Are you using a GPIB ENET by chance? I suspect you are, and are seeing an error described in the following NI web document:
Title: GPIB-ENET and Error 28
Error: http://digital.ni.com/public.nsf/websearch/168219CDCFF462998625660B0053DB7E?OpenDocument
If you are using another product, or are having other troubles, definitely repost!
Best Regards,
JLS
Best,
JLS
Sixclear

Installer is stuck and waiting for something

I am installing weblogic 7.0 server in silent mode, sometimes it seems to be working
okay but sometimes it is hanging and never seem to finish. I would have to kill
the process.
It installs server, domain etc and says "BEAInstallController waiting...", I always
get this message but sometimes it waits for a second and goes to next task but
sometimes it seem to wait for ever.
[wlsinstall.log]

If the installation hangs, please try capturing a JVM thread dump. Kill -3 should work
on UNIX systems or the Ctrl-Break keys on Windows. You might also try obtaining some
native process information such as "/usr/proc/bin/pstack" and "truss" on Solaris (or
other O/S counterparts). These tools should help determine the cause of the hang.
Sincerely,
Charlie Therit
Developer Relations Engineer
BEA Support
sunitha nerevetla wrote:
I am installing weblogic 7.0 server in silent mode, sometimes it seems to be working
okay but sometimes it is hanging and never seem to finish. I would have to kill
the process.
It installs server, domain etc and says "BEAInstallController waiting...", I always
get this message but sometimes it waits for a second and goes to next task but
sometimes it seem to wait for ever.
Name: wlsinstall.log
wlsinstall.log Type: Text Document (application/x-unknown-content-type-txtfile)
Encoding: base64

NI-DAQmx 8.5 Installer (Download version) hangs asking for Disk 2

My configuration:LabVIEW 8.2.1, WindowsXP SP2
Using the downloaded version of NI-DAQ (NIDAQ850.exe). I'm trying to install NI-DAQmx 8.5 on a clean LabVIEW build machine. The installer hangs prompting me to insert CD disk 2. It states "The specfied folder does not contain the correct volume".
How is one supposed to complete the installation?
My downloaded HDD path:
C:\National Instruments Downloads\NI-DAQmx\8.5\NIDAQ850\
NI Application/Driver History:
Installed LabVIEW 8.2.1 without driver CD support
Installed NI-VISA (download) - works fine
Installed NI Vision Acquiistion Software 8.2.3
Breaks trying to install NI-DAQmx 8.5 (download
-Chroma
Attachments:
NI-DAQmx 8.5 Install Error.png ‏50 KB

Hello,
I wanted to clarify that when the installer was hanging and asking you to insert CD disk 2. It was actually looking for a second folder title NIDAQ8502, which has document and product information.
This folder is downloaded to the above location when running the self extracting executable NIDAQ850.exe from the installer page link “NI-DAQmx8.5 (810 MB)”. Please check to see if the folder is in the appropriate location or if it was deleted.
Message Edited by samantham on 02-12-2008 11:08 AM
Message Edited by Support on 02-15-2008 12:50 PM
Samantha
National Instruments
Applications Engineer
Attachments:
DAQmx8502.JPG ‏31 KB

Installer DVD version number question for FCS 3

Hello All,
I just purchased a used FCS3. Upon inspection of the DVD, all of the DVDs say "Version 3.0, 2009", except for the DVD Studio Pro which says "Version 2.0, 2007"
Now I know apple didn't do much for DVD Studio Pro between FCS2 and FCS3. So I want to know if they at least updated their installer DVD in the FCS3, or did they just recycle the FCS2 installer DVD?
Can someone check their FCS3 installer DVDs and verify that the DVD Studio Pro installer also should say "Version 3.0, 2009"? I think the seller may have accidentally swapped the FCS2 installer in there by mistake, but I wanted to make sure before I start asking questions.
I own FCS2, and the DVD Studio Pro DVD is identical..
THanks

The DVD SP app is on the main disc - although there is a separate disc for the additional content such as templates etc.
You should see this in the installer dialog...
Main disk contents...

Takes a long time when waiting for plsq: package_name. while editing

Hallo,
in APPS-Environment we have over 30.000 Packages. When editing plsql code
an trying to write a package.function call , sql-developer tries to display the available functions and procedures for the given package after typing the "DOT" and display that. That takes very long. What's happen ?
Regards
Uwe

It's loading the code insight. Since you have such a large number of objects you may want to turn this off.
sqldeveloper -J-Dsdev.insight=false
-kris

CP Buy & Sell add final_loading_ani.gif when waiting for update IE

CRM 7.0
We run B2B ISA now, when a search is running the user can see the internet explorer search bar is working.
We are trying to implment Channel Management and when we launch ISA from the Buy & Sell tab, a new window opens for ISA but is within a CRM frame. The window does not show the IE search is working making it hard to tell if the window is working or if the user missed clicking the link or button.
Would like to force the icon into some gif like final_loading_ani.gif .
When placing the order, if they hold the mouse right over the place order button they can see "request in progress, please be patient" but it the mouse is elsewhere the user can't tell the system is working.

Glenn Michaels,
For this to achieve you need to modify the pages in which you want to show the gif. Add Javascript while unloading and loading of the page to show the image.
There are different ways of doing it.
Example:
http://www.reconn.us/content/view/37/47/
Sateesh Chandra.

Why use a wait timer when you can "wait for front panel activity"?

Why does everyone:
1) Wire a stop button to the while loop conditional terminal and add a wait for 100 ms (or so) timer to the loop.
When they could:
2) Wire the stop button to the while loop conditional terminal AND to "Wait for front panel activity" VI as described in the VI's help file?
Thanks!
Adam

That's just a matter of habit. In previous LV versions, the wait for front panel activity was not available.
And of course, now you can use the Event structure, that offers better possibilities...Message Edité par chilly charly le 06-25-2006 04:11 AM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Labview evaluation version for linux

Sir i need evaluation version of labview for linux. kindly provide me
hyperlink if any, other wise provide send me CD for evaluation, if
feasible.
My postal address is
Murad Ali s/o Bagh wali
village and p.o babuzai.abakhel.pulha
distt and tehsil Mardan, NWFP, Pakistan
regards

Unfortunately, we do not currently offer an evaluation version of LabVIEW for Linux. We do offer evaluation versions of LabVIEW for Windows, so if you have a Windows system available, you can evaluate LabVIEW there. With the exception of a few Windows-specific features, the Linux version of LabVIEW is identical in both layout and functionality.
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

Installation Evaluation version when waiting for licence

Similar Messages

Maybe you are looking for