Installation extensions failed safari

i tried to install extensions to safari, but always failed and the system answer was:
"installation extensions failed, try later"
extensions with firefox were no problem and work fine

Triple-click anywhere in the line below on this page to select it:
~/Library/Safari/Extensions
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Similar Messages

Click to Flash extension to Safari fails to work

Using OX 10.9.4 on a new mac mini. I have installed Click to Flash extension to Safari 7.0.6 . I would like to avoid using any Flash.When a page comes up with a Flash the extension does not open the page or photo. I have reinstalled the extension a couple of times but still no success. How can you uninstall an extension? I appreciate any suggestions.
Youncled

From your Safari menu bar click Safari > Preferences then select the Extensions tab.
You can uninstall ClickToFlash from there.
There have been numerous complaints about ClickToFlash not working well with recent versions of Safari.
An alternative way to access Safari Preferences. With Safari open press Command , (comma)

Adobe Extension Manager CS5 - Adobe InDesign extensions failed to import on Mac OSX 10.9.3

Purchased a new MacBook Pro in January and just now trying to load my copy of Adobe CS5 onto it. Everything installed okay, but when I launch Adobe Extension Manager I get an error message saying that certain extensions failed to import and to make sure they are valid extensions.
I tried to install a 3rd party extension that I use and it will not import either. Not sure if this is a software or hardware issue.
Error message reads as follows:
The following extensions 'idcs5_AssetPubLibrary.zxp,idcs5_AssignmentUI.zxp,idcs5_Assignments.zxp,idcs5_AWS.zxp,idc s5_AWSUI.zxp,idcs5_BasicTools.zxp,idcs5_Book Panel.zxp,....' for product 'InDesign CS5' failed to be imported. Please make sure these are valid extensions.
I tried to update the extension manager to version 5.0.3 and that did not work. I tried uninstalling the entire suite and reinstalling and same results.
Any help would be greatly appreciated.

My guess is that you're trying to use the Migrate feature from OSX. Unfortunately, this will not work reliably with Adobe Creative Suite/Creative Cloud applications.
You'll need to run the Adobe Cleaner tool to delete all Adobe stuff you copied over:
Use the CC Cleaner Tool to solve installation ... - Adobe
Then you'll have to install CS5 from your original discs or a backup of your original install files.
Lacking that, you can download CS5 from this link:
Download and Installation Help

Installer Extension (update problem)

Hi,
I tried a little example with the installer extension of JWS. For the first time visit all is fine. The installer is starting and installs something (stupid :-).
Also the second and third time visit all is running fine.
So, I'm happy and try to modify my application. I expect that the installer will called to uninstall and then make a new install with the modified application.
But when I try to call my new application I get an error.
The application hangs during the initialisation process
(downloading installer-descriptor).
In the log I get the following error:
java.lang.NullPointerException
     at com.sun.javaws.LaunchDownload$2.visitExtensionDesc(Unknown Source)
     at com.sun.javaws.jnl.ExtensionDesc.visit(Unknown Source)
     at com.sun.javaws.jnl.ResourcesDesc.visit(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkJNLPSecurityHelper(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkJNLPSecurity(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Any idea?

I've put my example in the web, see
http://www.mpi.nl/world/tg/j2se/jnlp/test/installer/
Main and Installer are opening exit-buttons each.
I saw the Installer button once, but failed to see him again. Any hint appreciated.
I get the same Exception as in the initial posting:
as soon as any jar or jnlp file is updated (touched)
JWS hangs and must be aborted. Log says NullPointerException at
com.sun.javaws.LaunchDownload$2.visitExtensionDesc
I can confirm what dmullens describes:
setting _default.locallyInstalled=false
in file ELinstaller.jnlp will allow you do get a new update.
But this is no good! It will work only one time
because the next update will set
_default.locallyInstalled=true back which reveals the bug again.
I have two questions:
1) Why don't I see the JFrame of the Installer?
2) Can I change the source code in order to prevent the
visitExtensionDesc Exception?

I can't install any extension in Safari 5.1.9.

Hello,
I am trying to install an extension to Safari (5.1.9.) however I get an error message after which the install button disappears and it says: Install Failed. Please try again later.
- I have tried deleting the user/library/caches/com.apple.Safari/cache.de
- I have tried deleting the user/library/safari/extensions/... .plist
Any suggestions?
I am using macbookpro (mid 2009) running os x 10.6.8

Step one is to log into a newly created admin user account and see if the problem persists.

J2se 1.5 jnlp installer extension

Has any one being successful in getting an installer extesion (using installer-desc) to run under j2se 1.5 webstart. It constantly fails with following error for me.
JNLPException[category: Launch File Error : Exception: null : LaunchDesc:[/b]
However this Runs well under j2se 1.4+
I am not sure this is a java bug or I am doing something wrong.
Any reply would be greatly appreciated.
Vajira

main jnlp file
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.5+" codebase="http://eslserver:9085/installer_web/launch/" href="$$name">
     <information>
     <title>FSOnline Desktop Client</title>
     <vendor>Future School</vendor>
     <homepage href="http://www.future.com.au"/>
     <description>Version 1.0</description>
     <description kind="short">FSOnline Desktop Client</description>
     <icon href="images/icon.gif"/>
               <icon kind="splash" href="images/splash.jpg"/>
     <offline-allowed/>
     </information>
     <security>
     <all-permissions/>
     </security>
     <resources os="Windows" arch="x86">
     <j2se version="1.3+" maximum-heap-size="250m"/>
     <jar href="resources/app/rmiserver.jar"/>
     <jar href="resources/app/common.jar"/>
     <jar href="resources/app/bsf.jar"/>
     <jar href="resources/app/jaxp-api.jar"/>
     <jar href="resources/app/js.jar"/>
     <extension name="FSOnline Desktop Client Installer" href="installer-ext.jnlp"/>
     </resources>
     <application-desc main-class="com.fs.learner.core.rmi.FsdsRmiImpl">
          <argument>Main.htm</argument>
          </application-desc>
     </jnlp>
installer extension is as follows
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.5+" codebase="http://eslserver:9085/installer_web/launch/" href="$$name">
     <information>
     <title>FSOnline Desktop Client Installer</title>
     <vendor>Future School</vendor>
<homepage href="http://www.future.com.au"/>
     <icon href="images/icon.gif"/>
     <offline-allowed/>
     </information>
     <security>
     <all-permissions/>
     </security>
     <resources os="Windows" arch="x86">
          <j2se version="1.3+" maximum-heap-size="250m"/>
          <jar href="resources/app/installer.jar"/>
     </resources>
     <installer-desc main-class="com.fs.launch.core.Welcome"/>
</jnlp>

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

iTunes:
AppName: itunes.exe
AppVer: 10.5.0.142
ModName: unknown
ModVer: 0.0.0.0
Offset: 001be6f6
Quicktime:
EventType : BEX
P1 : QuickTimePlayer.exe
P2 : 7.71.80.42
P3 : 4ea5c6ef
P4 : QuickTimePlayer.dll
P5 : 7.71.80.42
P6 : 4ea5c6d5
P7 : 00005b6d
P8 : c0000409
P9 : 00000000
That's consistent with another application (other than QuickTime) having dropped old QuickTime componentry in non-standard locations on the PC.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Cannot install extension on Safari 6.0.5

Please help!
I cannot install any extension on Safari. I get the message "Safari could not install the extension. An error occured during the installation of the extension".
I have abled the extension function in the preferences and can install extensions on the Guest-account, but not as Administrator.
I have a MacBook Air OS X version 10.8.4.
I hope you can help me!

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

At start up I get a request to install a bitdefender extension to safari. I am sure this is a virus as the link is not familiar, how do I remove this start up request

At start up I get a request to install a bitdefender extension to safari. I am sure this is a virus as the link is not familiar, how do I remove this start up request

Hi Pero127,
What I mean is was this a package installer, or an actual extension?
If just an extension, when you double click one, the OS asks if you want the extension installed. In which case, yes, that is the only item installed on your computer and you can then just uninstall it.
But if it was an application installer package, then it could have installed many more items onto your computer than just the extension. The rest will still be on your drive after removing the extension.

How can I install Adobe Photoshop Elements Update 9.0.3 after I get a message that Installation has failed and the solution is not in troubleshooting or forums?

My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
Colin Hansen

Try downloading and installing the 9.0.3 updater from here:
mac
Adobe - Photoshop Elements : For Macintosh
windows
Adobe - Photoshop Elements : For Windows

Can anyone please advise how I 'enable' extensions in Safari 5.0.6. on an iBook G 4?

Hi, can anyone please advise me how I 'enable' extensions in Safari 5.0.6. I have an iBook G4?
and secondly, is there anyway I can update from 10.5.8 Mac OSX on my iBook G4 ?
I am a complete novice.
Many thanks.
thall3

Try Safari > Preferences > Extensions
Upgrade from v10.5.8 on an iBook G4? No. The next OS X up from v10.5 Leopard is v10.6 Snow Leopard.
Requirements for Snow Leopard include an Intel procdessor. Your iBookG4 is PowerPC.
Mac OS X v10.6 Snow Leopard - Technical Specifications

Looking for a high-contrast extension for Safari for Windows

First of all,what do we call them - extensions or plugins?
Is there an extension for Safari for Windows for high-contrast? I can't find one anywhere. Windows 7 is set to a HC theme. IE just follows suit. Chrome detected this, ad offered to install a theme.
Don't know why, but I still prefer Safari on my Win7 system. But really need HC. One that just inverts the colors would work, but one with several other options like the Chrome extension would be better.
A Link! A Link! My kingdom for a Link!

Apple has dropped support for Safari on Windows

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

Application express installation is failed while running apxdevrm.sql scrip

Hello Experts,
i am new to Oracle Application express. My installation is failed while running the script (apxdevrm.sql).
here is the command i ran as sysdba
@apexins xxxxx apex apex temp /i/
installation is exited with the following error :
REPORT:SYS> prompt Set Application ID...
Set Application ID...
REPORT:SYS>
REPORT:SYS> begin
2
3 -- SET APPLICATION ID
4 wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,4411);
5 wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
6 null;
7
8 end;
9 /
REPORT:SYS>
REPORT:SYS> --application/delete_application
REPORT:SYS>
REPORT:SYS> begin
2
3 -- Remove Application
4 wwv_flow_api.remove_flow(nvl(wwv_flow_application_install.get_application_id,4411));
5
6 end;
7 /
begin
ERROR at line 1:
ORA-20001: API operation includes calls that are incompatible with the current runtime.
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 32
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 247
ORA-06512: at line 4
here is my database version :
REPORT:SYS> select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
OS version :
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.6 (Tikanga)
any one had this issue in the past?
your help is greatly appreciated.
Edited by: 892564 on Oct 20, 2011 4:15 PM

Hello experts,
is there any best way to trouble shoot the error which i got?
Thanks
!# Pavan

OIM 9.1.0.2 - ActiveDirectory 9.1.1.7.0 Installation Status : Failed

Hi,
I am using OIM 9.1.0.2
When I install the AD connector from Deployment Manager -->Install Connector, It shows the error
DOBJ.XML_IMPORT_ERROR
Unknown tag OBJ_OFFLINED recieved.
Step 2 : Connector Installation
ActiveDirectory 9.1.1.7.0 Installation Status : Failed
Configuration of Connector Libraries
X Import of Connector XML Files (Using Deployment Manager)
X Compilation of Adapter Definitions
Click Retry to retry the installation after correcting the errors.
What needs to be done for this ?
Regards
Praveen

With the introduction of oim 9.1.0.2, the Offline-Line Provisioning attribute was added to the Resource Object. You are trying to import the connector into an environment that is out of date. The solution to this is to open up the XML file, and cut out the XML tag within your resource object for OBJ_OFFLINED and then it should work. But the next issue you are going to run into is most likely the connector version is not supported in your version so it might not work.
-Kevin

Installation extensions failed safari

Similar Messages

Maybe you are looking for