Installation fails connecting to network printer

Installed new motherboard, processor Phenom II X4, memory into system. I installed:
Win XP Pro SP3
Windows Firewall disabled; no third party AV, firewall software (brand new OS install)
Connecting to Dlink Gigabyte switch DCS-2208
Printer Officejet Pro 7780
Printer Software Version: Full and Basic 8.0.2
Static IP address set on printer.
During install after select to install a wired connection, the software discovers my printer. After selecting next button it fails when installing to software with a big red "X"
In the installation error log: CSLPInterface:: InstallDevice caught in exception, Exception from Service 0x8007000D
Run: Driver UI Plug-In exits returning 50
exit code=50
Any ideas
Thanks

T,
I'm curious if you ever got this resolved. I'm having the same problem with a Photosmart C5180.
It all started because I couldn't scan, so after resetting everything (laptop, printer, switch, router) and it still not working- I decided I'd just reinstall the software. I decided to download the latest software from hp's site, uninstalled the old software and installed the new software. I select Network Printer, it finds the printer and then proceeds to install the device - where after 70 percent or so, it fails out providing me the error:
Now Launching=X:\hpzdui01.exe -1 XXX -f X:\FIVins??.DAT
CSLPInterface::InstallDevice caught in exception, Exception from Service 0xE0000228
RUN: Driver UI Plug-In exits returning 50
Exit code=50
Which is similiar to yours, the only exception of course being the Service ID.
I've run a L3 and L4 uninstall but still get the same problem. I've deleted all TCP printer ports since the uninstall didn't delete them, thinking that may be the problem and it wasn't. I searched for the Service number it lists above in the registry and didn't find it. Tried installing by right clicking on the exe and selecting Run As Administrator. None of these fixed the problem.
I've been chatting with HP support online (3 times) and have done the following:
Reinstalled
Uninstalled
L3 Uninstall
Rebooted
Set firewall exceptions for both inbound and outbound
disabled firewall
disabled antivirus
reinstalled
uninstalled
powered off printer
unplugged network & power supply
pressed the power button on the printer for 30 seconds to deplete the stored power in the capacitors
powered the thing back on
Verified network connectivity by going to the printer web page
reinstalled
uninstalled
Uninstalled using Windows Install Cleanup utility
reinstalled
uninstalled
L4 uninstall
rebooted
Turned off my wireless connection on the laptop, plugeed into wired connection
reinstalled
uninstalled
Finally was told it was a problem with my laptop and politely asked if there was anything else they could help me with.
I believe its a problem with their software since my laptop shows no other signs of issue and the printer works on another laptop running Vista Home Premium (just like mine) with no issue. I was printing ok before the issue but for some reason had an issue with scanning leading to this problem.
Kind of makes me want to go out and buy a multi-function from a different manufacturer.
What a waste of time!
If you've been able to resolve your issue, please let me know what you did. If anyone has any ideas, I'd be appreciative if you could let me give me some idea as to what to try next.
Regards,
Dolfan234

Similar Messages

How do I connect a network printer to ipad 3. I have a HP LaserJet P2035n. It is a network printer. Not Wireless.

How do I connect a network printer to ipad 3. I have a wireless router on my LAN. I have a HP LaserJet P2035n which is a network printer and it is connected to the LAN. The printer is not on the AirPrint list. The printer is not wireless.

Hello,
I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes.
Thanks!

Need help connecting to network printer using xfce and cups

Hello
please can someone assist me with setting up a printer.
I am running arch and xfce desktop.
I have an Epson Stylus Photo R800 USB printer connected to a wireless Belkin all-in-one Print Server.
I do not know how to connect to this printer.
I am not conversant in CUPS or network printing and would very much like to use the printer.
My arch box is connected through cable to a wireless router.
The print server is connected to the wireless router and the router confirms the print server is attached to the network.
The print server IP address is 192.168.0.100.
The printer server has a web interface which I used to set wireless and TCP settings. I should say that I went into this interface and configured the print server which is totally usable and fine from a Vista laptop using wireless - vista laptop "sees" the print server and prints over wireless, therefore I know the server and printer are working together and all the print server settings are fine. I dont know how Vista connects, it just does!
I tried installing gutenprint and foomatic, went into the CUPS server page (localhost:631) and found my printer but I'm not sure if my connection string (socket://192.168.0.100:9100) is correct. I've tried several values and several Epson drivers from the CUPS web interface, all to no avail. I just get this message:
bash-3.2# lpstat -t
scheduler is running
system default destination: Epson
device for Epson: socket://192.168.0.100:9100
Epson accepting requests since Sat 26 Jul 2008 22:53:35 BST
printer Epson now printing Epson-0. enabled since Sat 26 Jul 2008 22:53:35 BST
/usr/lib/cups/filter/pstoraster failed
I have no desire to be a CUPS expert nor a networking expert - I was rather hoping someone could guide me through the process, I have tried reading web links (google) but do not understand various pages and instructions.
bash-3.2# cat /etc/cups/printers.conf
# Printer configuration file for CUPS v1.3.8
# Written by cupsd on 2008-07-26 22:34
<DefaultPrinter Epson>
AuthInfoRequired username,password
Info Epson
DeviceURI socket://192.168.0.100:9100
State Idle
StateTime 1217108079
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
</Printer>
any ideas good folk?
Last edited by keratos (2008-07-26 22:07:45)

EDIT:
SOLVED!
the problem was that gutenprint needed to be installed.
I looked at the rastertops file in /usr/lib/cups/filter and it was very small, handfull of lines, but refered to gutenprint (whatever that is).
"pacman -Q gutenprint" revealed it was not installed.
All is fine now.
GREAT!

Can't connect to Network Printer

I just bought a laptop with Vista. I have wireless router connected to a wired router. My two desktops are conneted to the wired router and the laptop is wireless to the wireless router.
My printer does not have a wireless card, so I have it plugged to one desktop, and I have the other desktop using it as a network printer.
I can't seem to get the wireless to see the printer. I have enabled file & print sharing on all computers, and the print spooler service is started on all computers. When I do "Add a printer" it doesn't see the printer. I tried doing "Add a network printer" and entering the name as \\computername\printername (where computername is the computer the printer is attached to), but I alternately get these two errors:
"Windows cannot connect to the printer. The server print spooler service is not running. Please restart the spooler on the server or restart the server machine" or
"Windows cannot connect to the printer. Makes ure that you have typed the name correctly, and that the printer is connected to network."
I have not been able to see the desktop computer at all in the network options, but I do see the wired router listed, but no computers connected to the router.
Can anyone help with this? I am at my wit's end. Dan

"Windows cannot connect to the printer. The server print spooler service is not running. Please restart the spooler on the server or restart the server machine" or
see the tail end of my thread here, it sounds a LOT like your problems and my own are similar:
http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/7ab3e2a9-832c-4504-8d97-c7199bcc207e
Hello,
http://support.microsoft.com/default.aspx?scid=kb;en-US;2388142
Might be the right hotfix!
I will be trying this hotfix this week. I have this problem SO bad right now. The only slight difference is that my print server is running Microsoft Storage Server
2003, and all my clients are now windows 7. The problem hits users at seemingly random times, random 5% of the company per day, and all printer pools...it made no sense at all!
I'll keep you posted as to whether the asyncronous RPC reg key helps, or if your hotfix does.
There is also something i found that works (for 48 hours straight anyways):
On vista/7 client, go to Devices and Printers and click Add Printer
Then choose Local Printer. I know your printer is shared on a print server, just stick with me here!!
Choose Create New Port and select Local Port...
When it asks you for a port name, type in the UNC ADDRESS of the printer (ie \\printserver1\HPLaser5000n).
When it asks you for a driver, point it to the right location where you downloaded a clean set of drivers matching your client OS and printer. Or press the Windows Update button.
finish adding the printer. You will notice the name of the printer doesn't have a "...on [printserver1"
anymore, BUT it will still print!!
I have done this for 4 printer pools and for the last 2 days the 1 user i set it up for has had no printing problems. May be total coincidence, but at this point i was willing to try anything. I'm not sure if this constitutes fooling windows 7 into setting
up a remote printer as a local printer, and i'm also doubting this will be deployable via GPO or script...but still, i hope it helps.
-Dane

Connect to network printer programatically

Hi All
Is it possible to connect directly to a network printer
using gpib or visa dll directly (i.e. low level C Code). I don't want to use
LabView for the purpose. Could I get some example code.
Thanks
Pardeep
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.435 / Virus Database: 244 - Release Date: 12/30/02

I had to work on the prototype that defined the difference
of using LabView and C API and the advantages of LabView.
So the easiest way is to connect to the printer and show how much
programming effort is required and I am new to this field so I had some
problems. But I have successfully connected to the printer using VISA.
Thanks for your help.
Regards
Pardeep
"Dennis Knutson" wrote in message
news:[email protected]..
> If you're trying to connect for printing of a file, neither GPIB or
> VISA is going to help you. They're for instrument control. If you want
> example code for some language other than LabVIEW, then the LabVIEW
> forum is probably not the best place to ask for it. NI has spearate
> forums
for GPIB, VISA, LabWindows CVI, etc. and there are dedicated
> newsgroups for C. Try soemthing like alt.comp.lang.c or
> alt.comp.lang.c++.
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.435 / Virus Database: 244 - Release Date: 12/30/02

Cannot connect to network printer: Canon MX330 series

Hello,
Not sure if this issue has been posted before, if so then please forgive me. I recently purchased my first Mac, a Macbook pro running on Mac OS X 10.6.6.
I have a network printer, a Canon MX330, at home that is connected to the family desktop computer, a PC on Windows XP.
When I connect my printer to the USB on my Macbook, it works instantly and I can print a test page. I can also go on my Desktop PC and print on that printer through the network.
The problem arises when I connect my printer to my desktop PC. The Macbook is unable to connect to the printer. However, I can browse my Desktop's shared folders from my Macbook. The printer also works locally on the Desktop as well as from the other PC's that are on the network, but not on the Macbook.
If anyone can please help, that would be really appreciated. Right now I have no choice but to copy my files to the public shared folder, then go upstairs to the Desktop, open them, and print.
Thanks!
Phil

Hi Phil,
What they have described is the correct procedure for adding a Windows shared printer to the Mac. Given that you can connect to the shared folder on the PC then this process should work but can take some time.
The first thing to ensure is that the printer on the XP PC is shared. In Printers & Faxes on XP, right-click the printer icon and select Sharing. Select 'Share this printer' and set the Share Name to a single name (spaces can impact things). OK this to close the driver properties window.
With regards to the three columns that appear, the first column is for the workgroup name. If you are using XP Professional then the name will be Workgroup. The Home version will show MSHome. This workgroup name can take a while to appear (the Mac needs to determine who is the master browser on the network) but you can help the Mac by opening System Preferences > Network and for the connection type you are using (Airport or Ethernet) select it and then select the Advanced button. With this new view you will see the WINS tab. Select this and you will see the Mac's workgroup name and the workgroup it belongs to, which will most likely be blank. Click the drop menu and the workgroup name will show. Select this name and OK the change.
Now try adding the printer again, selecting the Windows icon. The workgroup name of XP PC should show in the first column. If it does, select it and then second column will show the XP computer name. Select this and you should get prompted to enter the admin user details for XP. After entering the correct information the shared printer name will appear. Select this and then you can progress to selecting the PrintFab MX330 driver.

Word 2010 32bit connecting to network printer hangs

User has issues when trying to print from Word or Excel 2010 32bit. In word once the user clicks print, there is a drop down menu to select a printer. When the user selects the network printer (a Ricoh MP C6501), underneath the printer drop down it says
"connecting to printer". Word will hang and then show up as "not responding".
Notes: There is another network printer (HP Printer) and a local HP Printer setup along with the ususal Fax, Microsoft XPS Document Writer, OneNote 2010. The default printer is the local HP Printer. When selecting the other network printer printer (HP Printer)
there is no hang or lag. From research I have found that it could be that the driver resides on the Print Server which is why it was taking so long to connect. So I directly connected to the printer by IP address bypassing the Print Server with an updated
32bit driver and it still comes up with the same results.
PC Info - Lenovo T410 running Windows 7 32bit and Office 2010 Professional 32bit.
Our other users who are running the same setup but with Windows 7 64bit and Office 2010 Standard does not have the same hang up. If there is any other information that I am missing, please ask me.
I have also tried a couple of other possible solutions, like disk clean and repairing Office to no success.
Any assistance would greatly be appreciated.
- GSXRSIX

User has issues when trying to print from Word or Excel 2010 32bit. In word once the user clicks print, there is a drop down menu to select a printer. When the user selects the network printer (a Ricoh MP C6501), underneath the printer drop down it says
"connecting to printer". Word will hang and then show up as "not responding".
Notes: There is another network printer (HP Printer) and a local HP Printer setup along with the ususal Fax, Microsoft XPS Document Writer, OneNote 2010. The default printer is the local HP Printer. When selecting the other network printer printer (HP Printer)
there is no hang or lag. From research I have found that it could be that the driver resides on the Print Server which is why it was taking so long to connect. So I directly connected to the printer by IP address bypassing the Print Server with an updated
32bit driver and it still comes up with the same results.
PC Info - Lenovo T410 running Windows 7 32bit and Office 2010 Professional 32bit.
Our other users who are running the same setup but with Windows 7 64bit and Office 2010 Standard does not have the same hang up. If there is any other information that I am missing, please ask me.
I have also tried a couple of other possible solutions, like disk clean and repairing Office to no success.
Any assistance would greatly be appreciated.
- GSXRSIX
hi Jaynet. I have exactly the same problem, just that my pc is running Windows 7 pro 32 bit and Office 2010, and it is a network printer ( HP Color Laserjet 5550 ). I have checked the
C:\WINDOWS\system32\spool\PRINTERS folder and it is empty. I need your assistance please.

Internet connection sharing, network printer: not at the same time

Here's the setup:
Mac+airport connected to wireless router connected via ethernet to network printer on wireless network "One".
I want to share my internet connection via airport/"One" with my iPod Touch.
I set up internet sharing, using "One" as the acceptable route. iPod works. Network printer doesn't.
If I turn off sharing, network printer works, iPod (obviously) doesn't.
How do I set it up so I can 1) print to my network AND b) share my internet connection with the iPod?
TIA

An update to this...
IP Address of AE is 169.254.231.99
Internet is set to DHCP
Network has nothing set
Airtunes is enabled in Music
My Macbook Pro has the external IP given by my DSL connection, on subnet 255.255.255.0 and gateway of my ISP
I can see the speakers in iTunes, but when I select the AE, It says its connecting, but then does nothing... after 20 secs the message disappears.
Firewall has 5353 UDP open, no messages in the firewall log.
Airport Express Firmware is 6.3

Itunes installer cannot connect to network %appdata%

once it gets to the quicktime part it stops and says that it cannot connect to network %appdata% is there anyway to make it work?

With the %Appdata% errors, some folks have been having some success with the following Microsoft document:
[You receive an "Error 1606" error message when you try to install or remove a Microsoft program|http://support.microsoft.com/kb/886549]

Connect my network printer to macbook air

I've recently switched from windows to Mac - I have first gen MAc book air. I'm trying to connect a wireless printer to it. (Kyocera Taskalfa 250ci). The mac can't find it, so I type in the IP address under the IPP setting. But it just won't connect. I have downloaded the relevant printer drives as well. But no joy.
Any advice?

Apple seems to have dropped the ball here,
I have been having the same problem with (Kyocera Taskalfa 3050ci) It seems that the Macs can't detect the printer
I have tried two different Macbook Pros, a 15 inch and a 13 inch they are both 2011 models, they connect once and that's it
they never detect the printer anytime after.

Connecting to Network Printer

Hi, I want to have my Printer (HP OfficeJet Pro 8500A) as the default Printer for my Archlinux machine.
The Officejet is connected to the network over ethernet and has the ip://192.168.178.5
I tried much stuff, hp-setup, cups and so on but no one wants to work...
CUPS:
HP_Officejet_8500 (Angehalten, Aufträge werden akzeptiert, Nicht freigegeben)
Beschreibung:
Ort:
Treiber: HP Officejet Pro 8500 a910 hpijs, 3.11.5 (color, 2-sided printing)
Verbindung: hp:/net/Officejet_Pro_8500_A910?zc=HPOccam
Einstellungen: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
Aufträge
Suche in HP_Officejet_8500:
Zeige 1 von 1 aktiven Auftrag.
▼ ID ▼ Name Benutzer Größe Seiten Status Kontrolle
HP_Officejet_8500-2 Test Page root 1k 1 unerledigt seit
Mi 27 Jul 2011 11:06:35 CEST
"/usr/lib/cups/backend/hp failed"
hp-setup finds the printer easily but doesn't reach to print anything (testpage etc.)
hp-setup -i
warning: python-dbus not installed.
HP Linux Imaging and Printing System (ver. 3.11.5)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
| SELECT CONNECTION (I/O) TYPE |
Num Connection Description
Type
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
2 par Parallel Port (LPT:)
Enter number 0...2 for connection type (q=quit, enter=usb*) ? 1
Using connection type: net
Using device: hp:/net/Officejet_Pro_8500_A910?zc=HPOccam
Setting up device: hp:/net/Officejet_Pro_8500_A910?zc=HPOccam
| PRINT QUEUE SETUP |
warning: One or more print queues already exist for this device: HP_Officejet_8500, Officejet_Pro_8500_A910.
Would you like to install another print queue for this device (y=yes, n=no*, q=quit) ? n
What am I doing wrong?
Regards

Hi, have installed dbus-python but still getting error
hp-testpage
warning: hp-testpage should not be run as root/superuser.
HP Linux Imaging and Printing System (ver. 3.11.5)
Testpage Print Utility ver. 6.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: Qt/PyQt 4 initialization failed.
error: hp-testpage -u/--gui requires Qt4 GUI support. Entering interactive mode.
error: Device error (Device not found).

How do i connect my network printer

I have a newer MacPro with Snow Leapord, I'm trying to use my HP Photosmart 3310 printer via network. I can see my folders on the Windows XP desktop but not the printer. Any ideas will be greatly appreciated.
Thank you

You may need to assign the printer a name that is shorter and without spaces or a static IP and use that to search for it. I assume the printer is on the network and not attached to the XP machine. If it is attached to the XP machine (like through USB) then you'll need to turn on printer sharing on the XP. This printer can connect to the network wirelessly, so if it is connected directly, verify that the XP can see it (print test page). You can try turning the printer on an off again, but using the IP to install it on the Mac will help. You may also need to install the driver manually.
DB

Unable to Connect to Network Printer

Hi,
I am trying to install Samsung ML-1640 through my wireless router's print server feature but its not working. Whereas I am able to print through my Windows PC's on the network with no issues.
On giving print command the print job is getting paused around 40-50% in the print que and not printing. Neither the printer is getting pinged through Network Utility.
The printer is work fine with my MBP 13' when attached directly through its USB port.
1) Have tried deleting & re-adding the printer through its IP with all the three different protocols LPD, IPP & HP JetDirect.
2) Have updated to the latest drivers from here: http://support.apple.com/kb/DL905
3) Also, have gone through the troubleshooting steps given in this article: http://support.apple.com/kb/PH11070

Tried with your suggested steps but no luck. First I just added IP address of the router (192.168.1.1) with IPP as protocol, it did not print. Here's the error log from Print Queue for your reference;
E [14/Feb/2013:13:03:10 +0530] [Job 1] Unable to queue job for destination "ipp://abc-macbook-pro.home/printers/Samsung_ML_1640".
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED printer-is-accepting-jobs attribute.
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED printer-state-reasons attribute.
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not support REQUIRED Cancel-Job operation.
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not support REQUIRED Validate-Job operation.
W [14/Feb/2013:13:05:12 +0530] Samsung_ML_1640: Printer does not provide REQUIRED job-id attribute.
Then, added the printer with 192.168.1.1:631 as IP address and again no luck. Here's the error log;
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED printer-is-accepting-jobs attribute.
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED printer-state-reasons attribute.
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not support REQUIRED Cancel-Job operation.
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not support REQUIRED Validate-Job operation.
W [14/Feb/2013:13:10:57 +0530] Samsung: Printer does not provide REQUIRED job-id attribute.

Connecting a network printer to my mac

I have a macbook pro(OSX 10.8) and recently a bought a D-link DNS-325 nas. The nas has an ability to connect printer to it. I have a brother mfc-7420 connected to it. I managed to connect the printer from the windows computers so I know it works. I have a problem connecting it to the mac. When I add a new printer and put the IP address of the nas and specify the driver it go through. The problem is when i am trying to print it doesn't print at all and shows the printer as paused all the time.

The best action will be to use the printer information for the Windows printer as a guide.
So in Windows, if you select the printer and right-click and select Properties (or Printer Properties on Win7) and then select the Ports tab and then click the Configure Port button, this will show the connection settings being used by Windows to the Brother. Of importance is the Protocol being used and if RAW, what Port is used, and if LPR, what Queue Name is used. With this information you can then configure the Mac to connect using the same settings.

I want to connect my network printer

Printer

My printer is in operation since 2005. Now he is on strike. I have Samsung - Printer Driver V2.6 date 30.Aug.2013 for MAC OS X 10.9.1 loaded. WITHOUT success. The Disk Utility shows me two errors:
Group differs on "Library / Printers / InstalledPrinters.plist" correctly would be 80, but group is 0
Different access rights for "Library / Printers / InstalledPrinters.plist" nominal value:-rw-rw-rw-, actual value:-rw-r - r -.
Why does the printer not run?
Have a scanner not working, after many years in use.
Other consequences?
Message was edited by: säckingen

Installation fails connecting to network printer

Similar Messages

Maybe you are looking for