Installation fails

what I had to do to get flash to install
It is a tossup at to who has the worst software Billie gates
or Adobe Flash Player ( AKA MacroMedia ). When I would
click on a site or link that required flash to work, I would
get a message that I needed Flash Player and a link to
download it. When I clicked on the link, it would take me to
the Abode Flash Player link. The only option is the
" INSTALLATION" botton. So, I clicked on it.
Then I get this:
When you see the installation completion movie above and
text below, your installation was successful. The installation
should only take a minute or two on a 56k modem.
And then NOTHING would happen it would just sit there for
ever. The installation NEVER happened. It did not work.
I finially figured out the if I go to START/RUN/
then type the in the open box
C:\Windows\System32\Macromed\Flash
then click OK
It takes me to that file location on C: drive
where there are 4 file
then I double click on the file named FlashUtil9b.exe ( it
is the file with the funnie looking "F" inside a circle )
After double clicking on FlashUtil9b.exe file a window/box
installer runs and Flash finally gets installed.
I had to totally shut down my computer and/to reboot before
Flash would work.
I am still not sure if this Mickie Mouse Giration has to be
preformed to get the software to install is because of
Adobe Flash Player ( AKA MacroMedia ) or Billie gates ( AKA
Mr. softie ) most likely BOTH.
good luck

I am baffled at how often, when frustrated with a product,
people decide that the best place to vent is a users' forum. Some
of the time it's the venter's fault, sometimes it's not. Either
way, I can't understand how anyone could gain satisfaction by
bashing the product that's being discussed in a forum full of
faithful users. Another great mystery...

Similar Messages

  • Camera Raw 6.7 Update for Mac OS 10.10:  Installation Failed error message.

    Camera Raw 6.7 Update for Mac:  Installation Failed error message.  Update downloaded directly from Adobe website.  Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished.  Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

    thanks for the prompt response...i appreciate it.  according to the link you listed, that's correct.  the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
    so it's clearly an issue related to the "upgrade" of the os.  seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it!  thanks again.

  • I purchased and downloaded Photoshop Elements 13, but the installer fails to initialise. How do I get it to work?

    I have Photoshop Elements 10 and Premier Elements 10 installed on my PC. Both were installed from discs that I bought a few years ago. I recently purchased the upgrade (by download) for both applications to version 13. In accordance with the (scant) instructions received by email, I downloaded the four files required from the Adobe site. I subsequently ran the .exe files, which in turn created directories on my PC, including set-up.exe files for both applications. When I run the setup files, I get an error message stating that the installer failed to initialise. The error message advised me to download the Adobe Support Advisor to detect the problem. That tool does not exist. I then sought assistance from the Abobe support site, initially using the hyperlink suggestions, which were of no use, then using the chat function. The operator kept trying to get me to do something with something called 'Creative Cloud'; which I am not familiar with, and do not use. He then instructed me to download and run a CS5 cleaner tool; however, none of the choices offered by that tool include my issue, or either Photoshop Elements or Premier Elements. I am reluctant to uninstall version 10 of the programs in case I end up losing the lot and therefore wasting even more money than the purchase price for this upgrade.
    All I want to do is upgrade my two applications from version 10 to version 13. I have paid the requisite fee but it clearly does not work. I appear to have totally wasted my money. Can anyone please tell me how to get it to work? I do not want to have anything to do with the so-called ‘Creative Cloud’ as I have no idea what it is, and I do not want to lose what I already have (and have paid for previously).
    I have tried for a few days to access the so-called 24/7 chat assistance but appeared to have been locked out as every time I try to access it, I get a message that the (24/7) chat is closed. Adobe has taken my money for a product that does not work, and also refuse to help me fix it.
    I am very frustrated with a product I bought that does not work, and a 24/7 support service that clearly is not 24/7, and which refuses to assist me. Can anyone PLEASE tell me how to get this to work? Rod.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • How do I fix the following error   Photoshop 13.1.2 for Creative Cloud Installation failed. Error Co

    Photoshop 13.1.2 for Creative Cloud
    Installation failed. Error Code: U44M1P7

    What is the current version of Ps (Help->System Info), if you have 13.0.1.2 already applied then you need to re-install Ps to get Ps 13.1.2.
    As 13.1.2 is a subscription patch this would not get applied over 13.0.1.2.
    If this still does not resolves your issue, Kindly mail me installer logs.
    For Mac:
    "Library/Logs/Adobe",
    For Win:
    Program Fies(x86)\Common Files\Adobe\Installers
    Please mail me @ [email protected]
    Regards,
    Ashutosh

  • What causes this message "Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7"?

    What causes error code: U44M1P7? I have rebooted my machine multiple times and continue to get the same results.

    Photoshop: Basic Troubleshooting steps to fix most issues
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

    What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
    I found the manual update, which worked!
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

    Hi Barbara,
    For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
    http://forums.adobe.com/message/5396792#5396792
    http://forums.adobe.com/message/5409050#5409050

  • Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

    Hello,  I need some help.  I am getting the following error just when updating my Photoshop CS6 app.   U44M1P7

    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html#TroubleshootUpda…
    Re-install on top of CS6 had to do that myself when I had perpetual CS6 installed and tried to update to Subscription version. Perpetual CS 6 13.0.1.3 Windows 13.0.6 Mac are different then 13.1.2 subscription version
    Explanations of error codes:
    U = Updater.
    44 = Install Update Error
    M1 = Automatic
    M2 = Standalone mode
    P = Patcher
    6 = Done With Errors
    7 = Installation Failed
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Photoshop 13.1.2 for Creative Cloud Installation failed.

    what to do ?
    Error Code: U44M1P7  Dreamweaver CS6 Creative Cloud release – Feb. 2013 Installation failed. Error Code: U44M1P7
    AND
    Use of keys like "d" - "x" - "b" does not work when i`m i "b" modus Its impossible to use teh X and d keys in brushes mode. I`m also using a wacom tablet. all system and program is runnin the latest versions... pleas help ! :-)

    CF-Wesenberg please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve the U44M1P7 error.

  • Photoshop 13.1.1 for Creative Cloud Installation failed

    Photoshop 13.1.1 for Creative Cloud Installation failed. Error Code: U44M1P7. How do I solve?

    Moroccoflowers please see http://forums.adobe.com/thread/1113531 in reference to the Photoshop update.

  • Photoshop 13.1 for Creative Cloud Installation failed. Error Code: U44M1P7

    So, Lion won't let me deactivate, so I can't use the updates that I just bought with signing up for the Cloud, so I tried installing on my Mountain Lion Macbook and this is what I get...
    Photoshop 13.1 for Creative Cloud
    Installation failed. Error Code: U44M1P7
    Please Help, somebody!
    Spent about an hour with Adobe Tech support just trying to figure out why I couldn't deactivate my product, only to find I had to close the chat room and the advice still didn't work.
    Very frustrated, here!  I have no updates on either computer, now!

    Hi Jules,
    Sorry to hear about your difficulties.
    My recommendation would be
    - Uninstall PS via Mac HD > Applications > Utilities > Adobe Installers (Mac OS X)
    - Create a new user with Admin rights, log out of your current account and into the newly created one
    10.7 http://support.apple.com/kb/PH4600
    10.8 http://support.apple.com/kb/PH11468
    - Reinstall Photoshop CS6 via Adobe Application Manager
    - Try to update to 13.1 using Help > Updates in Photoshop CS6
    -Dave

  • Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility bu

    Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.

    Hi Maarton,
    Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    -Ankit

  • "Installation Failed" when trying to install CS6 on a machine that has

    I am trying to install CS6 and keep getting "Installation Failed" error. I have restarted. Quit all applications. Uninstalled old versions of CS (Except CS5).
    I have a Macbook Pro from 2006. 2.16 GHz Intel Core Duo. Running OS 10.6.8.
    I looked at the log and the summary is as follows:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 9 error(s), 9 warning(s)
    ----------- Payload: {AAF0D225-F129-40F2-916E-12E28DBD19ED} Adobe Illustrator CS6 Core 16.0.0.0 -----------
    ERROR: DF031: Unable to read display attributes of "/Applications/Adobe Illustrator CS6/Plug-ins.localized"(Seq 11263)
    WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 11263)
    ERROR: DF031: Unable to read display attributes of "/Applications/Adobe Illustrator CS6/Plug-ins.localized/Icon
    "(Seq 11264)
    WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 11264)
    ERROR: DF031: Unable to read display attributes of "/Applications/Adobe Illustrator CS6"(Seq 15033)
    WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 15033)
    ERROR: DF031: Unable to read display attributes of "/Applications/Adobe Illustrator CS6/Icon
    "(Seq 15034)
    WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 15034)
    ----------- Payload: {97BA0109-F6BE-4F50-8904-C19442D7216E} Adobe Bridge CS6 5.0.0.0 -----------
    ERROR: DF031: Unable to read display attributes of "/Users/emilylozano/.Trash/Adobe Bridge CS6"(Seq 2517)
    WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 2517)
    ERROR: DF031: Unable to read display attributes of "/Users/emilylozano/.Trash/Adobe Bridge CS6/Icon
    "(Seq 2518)
    WARNING: DW063: Command ARKSetDisplayAttributesCommand failed.(Seq 2518)
    ----------- Payload: {4482EF4A-376B-46DE-9B17-E377232328E0} PDF Settings CS6 11.0.0.0 -----------
    ERROR: DF001: Unable to get permissions of "/Library/Application Support/Adobe/Adobe PDF/Extras"(Seq 177)
    WARNING: DW063: Command ARKChmodCommand failed.(Seq 177)
    ----------- Payload: {EB2A8CD4-B247-4810-A294-E3DB8EDC6060} Adobe CSXS Extensions CS6 3.0.0.0 -----------
    ERROR: DF037: Unable to delete directory "/Users/emilylozano/Library/Application Support/Adobe/CS6ServiceManager"(Seq 2)
    WARNING: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2)
    ----------- Payload: {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 -----------
    ERROR: DF037: Unable to delete directory "/Library/Application Support/Adobe/PCF"(Seq 2)
    WARNING: DW063: Command ARKDeleteDirectoryCommand failed.(Seq 2)
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    Exit Code: 0 - No error.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DF001, DF031 ... WARNING: DW063 ...
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    Thanks!

    Run the cleaner tool :- http://www.adobe.com/support/contact/cscleanertool.html
    Enable root user account ( http://support.apple.com/kb/ht1528) and then install the software from the root user.

  • SAP NW7.0 SR3 Java AddIn Installation failed at "Import Java dump"

    Dear all,
    I get an error at Java AddIn Installation SAP Netweaver 7.0 SR3
    (Software Life-Cycle Option -> Java Add-In for ABAP -> Oracle ->
    Central System ->)
    The first installation step "Central Services Instance (SCS) Java Add-
    In" I have installed it without errors.
    The Installation failed at 2nd step "Database Instance Java Add-In" at phase 11
    of 14 "Import java dump":
    26.05.09 15:16:46 com.sap.inst.jload.Jload main
    INFO: Jload -sec
    Q2B,jdbc/pool/Q2B,/usr/sap/Q2B/SYS/global/security/data/SecStore.properties,/usr/sap/Q2B/SYS/global/security/
    data/SecStore.key -
    dataDir /usr/sap/swdc/51033513/DATA_UNITS/JAVA_EXPORT_JDMP -
    job /tmp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN
    /ORA/CENTRAL/DB/IMPORT.XML -log jload.log
    26.05.09 15:16:47 com.sap.inst.jload.Jload main
    SEVERE: couldn't connect to DB
    26.05.09 15:16:47 com.sap.inst.jload.Jload logStackTrace
    SEVERE: java.sql.SQLException: Io exception: The Network Adapter could
    not establish the connection
    at oracle.jdbc.driver.DatabaseError.throwSqlException
    (DatabaseError.java:112)
    at oracle.jdbc.driver.DatabaseError.throwSqlException
    (DatabaseError.java:146)
    at oracle.jdbc.driver.DatabaseError.throwSqlException
    (DatabaseError.java:255)
    at oracle.jdbc.driver.T4CConnection.logon
    (T4CConnection.java:387)
    at oracle.jdbc.driver.PhysicalConnection.<init>
    (PhysicalConnection.java:420)
    at oracle.jdbc.driver.T4CConnection.<init>
    (T4CConnection.java:165)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection
    (T4CDriverExtension.java:35)
    at oracle.jdbc.driver.OracleDriver.connect
    (OracleDriver.java:801)
    at
    com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection
    (NativeConnectionFactory.java:215)
    at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection
    (OpenSQLDataSourceImpl.java:522)
    at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection
    (OpenSQLDataSourceImpl.java:276)
    at com.sap.inst.jload.db.DBConnection.connectViaSecureStore
    (DBConnection.java:105)
    at com.sap.inst.jload.db.DBConnection.connect
    (DBConnection.java:149)
    at com.sap.inst.jload.Jload.main(Jload.java:580)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke
    (NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke
    (DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sap.engine.offline.OfflineToolStart.main
    (OfflineToolStart.java:81)
    the database is up and running, the Oracle Listener is also working well.
    Any idea??
    Thanks so much in advance!
    Best Regards,
    Gerd

    Hi Sunny, hi Markus!
    many thanks for your hints!
    I've just solved the problem. The problem was, our Listener was not configured correctly.
    I've adjusted the listener.ora, tnsnames.ora to the correct hostname - cause, we had a hostname-switch last month and I had forgotten to adapt the Listener...
    now the Listener is running as well:
    mcho35au:oraq2b 120% lsnrctl status LISTENER_Q2B
    LSNRCTL for Solaris: Version 10.2.0.4.0 - Production on 30-MAY-2009
    09:52:48
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=Q2B.WORLD))
    STATUS of the LISTENER
    Alias LISTENER_Q2B
    Version TNSLSNR for Solaris: Version 10.2.0.4.0 -
    Production
    Start Date 30-MAY-2009 09:52:15
    Uptime 0 days 0 hr. 0 min. 32 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /oracle/Q2B/102_64/network/admin/listener.ora
    Listener Log
    File /oracle/Q2B/102_64/network/log/listener_q2b.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=Q2B.WORLD)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=Q2B)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=mcho35au)(PORT=1527)))
    Services Summary...
    Service "Q2B" has 1 instance(s).
    Instance "Q2B", status UNKNOWN, has 1 handler(s) for this service...
    Service "Q2B.WORLD" has 1 instance(s).
    Instance "Q2B", status READY, has 1 handler(s) for this service...
    Service "Q2B_XPT.WORLD" has 1 instance(s).
    Instance "Q2B", status READY, has 1 handler(s) for this service...
    The command completed successfully
    meanwhile the step "Import java dump" has finished successfully!
    Thanks to all!
    Best Regards,
    Gerd
    Edited by: Gerd Schuster on May 30, 2009 10:29 AM

  • Installation fails on new Macbook Pro

    I am trying to install CS3 on a new Macbook Pro Retina 13" with Mavericks. All of the CS3 apps except Photoshop installed correctly. Photoshop fails and when I try to launch it returns a message that it cannot be initialized because the disk is not available. I have tried reinstalling it and the installation fails. I tried launching the old copy from the previous computer's disk (now in USB enclosure) and I get the same error message. I tried copying it over to the new HD without success. Tried phone support and they won't help because it's an older version. CS3 is supposed to be compatible with Mavericks. Since the older copy and the new installation return the same message, I suspect (just a guess) some software issue, perhaps prefs or other files copied over from the old installation.
    Can anyone help me figure out what the issue is, and how to go about installing PS successfully?
    Thanks!

    Mike, that did the trick. I trashed the entire Photoshop CS3 Settings under the existing account, then created a new user and installed from there. Installation was successful. Then I went back to my existing account and it launched fine from there as well. A new Settings folder was created automatically and I'm good to go now. This was a huge relief - I was stressing. Also, I'm not sure if it's the performance of the new computer or if the prefs were the issue, but it is lightning fast now. It launches in a couple of seconds whereas on the older machine it was taking a couple of minutes. I really appreciate the help!

  • Installation Failing on Windows XP PRo

    Trying to install 10G Express with no luck. The installation process just stops and no further messages or prompts are given. Installation fails during the Copying files process and the last message in the dialog box is "Producing Product Information". Here is a snippet from the OracleDatabaseExpressInstall.log
    Property(S): OriginalDatabase = C:\WINDOWS\Downloaded Installations\{853C63CA-5594-4874-AAE3-C9B8A0975391}\Oracle Database 10g Express Edition.msi
    Property(S): UILevel = 2
    Property(S): Preselected = 1
    Property(S): ACTION = INSTALL
    Property(S): ISStartupEvent = E295978
    Property(S): ff9ef67406aa11d5ab9800b0d02332eb = g
    Property(S): CLEANUPUNINSTALLROLLBACK = Waiting
    Property(S): CostingComplete = 1
    Property(S): OutOfDiskSpace = 0
    Property(S): OutOfNoRbDiskSpace = 0
    Property(S): PrimaryVolumeSpaceAvailable = 0
    Property(S): PrimaryVolumeSpaceRequired = 0
    Property(S): PrimaryVolumeSpaceRemaining = 0
    Property(S): SOURCEDIR = C:\WINDOWS\Downloaded Installations\{853C63CA-5594-4874-AAE3-C9B8A0975391}\
    Property(S): SourcedirProduct = {F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}
    Property(S): ProductToBeRegistered = 1
    MSI (s) (50:38) [12:31:31:265]: Note: 1: 1708
    MSI (s) (50:38) [12:31:31:265]: Product: Oracle Database 10g Express Edition -- Installation operation failed.
    MSI (s) (50:38) [12:31:31:265]: Attempting to delete file C:\WINDOWS\Installer\2b7f2ce.mst
    MSI (s) (50:38) [12:31:31:265]: Unable to delete the file. LastError = 32
    MSI (s) (50:38) [12:31:31:296]: Cleaning up uninstalled install packages, if any exist
    MSI (s) (50:38) [12:31:31:296]: MainEngineThread is returning 1602
    MSI (s) (50:C4) [12:31:31:296]: Destroying RemoteAPI object.
    MSI (s) (50:10) [12:31:31:296]: Custom Action Manager thread ending.
    === Logging stopped: 11/5/2005 12:31:31 ===
    MSI (c) (D0:78) [12:31:31:328]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (c) (D0:78) [12:31:31:328]: MainEngineThread is returning 1602
    === Verbose logging stopped: 11/5/2005 12:31:31 ===

    There are a few well known installation issues - in order of likelihood
    1) Check that the Windows username you have logged on with does not contain a space (or other special characters such as umlauts etc). The workaround is to create another Windows account without spaces, give that account Administrator privileges, and install using that account.
    2) Certain locales have problems. These include Russian, Estonian, English - South Africa, Spanish - Dominican Republic, German - Switzerland, French - Switzerland, Italian - Switzerland. The work around is to set the user locale to something else before the XE installation.
    3) If you have the DLL oraociei10.dll in your path you will have problems. Workaround is: Search to see if this file exists on your hard drive. If it does, check to see that the directory that contains it is not in your path. If it is in your path, then remove during the Install. You can add it back to your path after the install, but the SQL Command line provides with Oracle Database XE will not work
    In all cases above, deinstall the software using Add/Remove Progam before trying the work around

  • Acrobat XI Pro installation failed

    MacBook Pro 13" Retina
    OSX 10.8.5
    3 GHz Intel Core i7
    8 GB 1600 MHz DDR3
    Used Akamai NetSession Interface.
    Downloaded from Adobe website. After download, clicked on installer, entered serial number, quickly went through installing until right at the end: "THE INSTALLATION FAILED: Installer encountered an error that caused installation to fail. Contact manufacturer." Part of the message cut-off abruptly.
    Then, it appeared that the installation did occur but when I opened the software the interface didn't look "smooth." Then almost immediately software update stated Acrobat XI Pro 11.0.04 was available for download, but computer wouldn't allow it to be installed citing error on initial problem. I uninstalled XI Pro and tried to download again from Adobe website but the window instantly opened for Akamai and said download complete. The same problem occured when I tried to install again, with the same error message.

    Thank you Anish.
    The software now appears to be working for some reason, and even though Error 1301 appeared when trying to update to Acrobat 11.0.04, it shows that I am running 11.0.04. There is something going on in there but so far so good.
    Date: Wed, 27 Nov 2013 22:38:11 -0800
    From: [email protected]
    To: <removed by admin>
    Subject: Re: Acrobat XI Pro installation failed Acrobat XI Pro installation failed
        Re: Acrobat XI Pro installation failed
        created by Anish Kumar in Acrobat Installation & Update Issues - View the full discussion
    Following links may be helpful for you:
    http://helpx.adobe.com/x-productkb/policy-pricing/akamai-download-mana ger-faq.html
    http://helpx.adobe.com/creative-suite/kb/cant-download-store-purchase. html
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5882076#5882076
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: Acrobat XI Pro installation failed
    To unsubscribe from this thread, please visit the message page at Re: Acrobat XI Pro installation failed. In the Actions box on the right, click the Stop Email Notifications link.
          Start a new discussion in Acrobat Installation & Update Issues at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for