Installation Flash cs3 with Windows Vista Ultimate

I am trying to use Flash on Windows Vista Ultimate.
Installing the program tells me a mistake "error in the
installation component". I have tried to install in administrator
mode and windows account manager
Can anyone tell me how to install Flash for suite cs3?

I would download a new installer, you can get the trial
installer, then just enter your serial when you first run it.
Sounds like a corrupt exe. But yes, make sure and run as
Administrator by right clicking the file.

Similar Messages

  • Installing iTunes with Windows Vista Ultimate

    I have tried to install iTunes most recent version and others earlier with on my HP Pavillion and I keep getting a message that says I will not be able to import or burn CDs because iTunes did not install correctly. I have the *Windows Vista Ultimate* operating system. Any reason why this is happening?

    Hi Innonut;
    You are asking your iTune question on the Leopard forum. If you would report in the Windows iTunes Forum, you might get more response there.
    Allan

  • VB Script Problems with Windows Vista Ultimate

    I have iTunes 7.0.2.16 and when i try to update it i keep getting a message that says:
    "iTunes could not be installed becasue visual basic script (VB Script) is not installed or has been disabled. make sure VB Script is installed, turn off script blocking in anti-virus and personal firewall software, re-register VB Script, then install iTunes."
    I even get this message when i try to unistall iTunes. I completly uninstalled my antivirus software and removed all firewalls, but i wasnt able to fix the problem.
    I visited the iTunes and QuickTime for Windows cannot be installed without Visual Base Script (VBScript) section for help, however, it was unable to solve my problem.
    I currently have Windows Vista Ultimate and have been looking for a fix for a while now...any help would be greatly appreciated...
    thanks
      Other OS   Windows Vista Ultimate
      Other OS   Windows Vista Ultimate
      Other OS   Windows Vista Ultimate

    Hey rrijeka,
    Unfortunately, Vista is currently not compatible with iTunes.
    This article: http://docs.info.apple.com/article.html?artnum=305042 will tell you more about the iTunes and windows Vista compatability. The article will also be updated when itunes and Vista are compatible.
    Jason

  • AirPort Disk - Issue with Windows Vista Ultimate

    I setup an AirPort Extreme network, with a shared USB Drive and so far I've only found one issue.
    When attempting to create new files and renaming them, or rename pre-existing files on the shared USB Drive using Windows Vista Ultimate I get the following Yes/No dialog:
    "The Z:\ folder does not exist. The file may have been moved or deleted. Do you want to create it?"
    Then there's information about the mapped drive. If I click "Yes" in the dialog, then the dialog goes away for a moment then pops back up. I can't create a new file directly on the shared AirPort Disk, nor can I modify or create and rename new files on the disk without getting stuck in the loop.
    I can, however, create a new file locally on the Vista box and copy it up, and I can even create a new directory locally with files and copy them up without issue.
    Now, the issue does not happen when I use my MacBook or my XP machine. This issues seems to be a Windows Vista issue only, and I haven't seen anyone else reporting it.
    Here's information about the disk share implementation:
    - The disk is password protected (turning on accounts really breaks the ability of Windows Vista to work with the disk)
    - The disk is Mac Formatted with Case Sensitivity, and Journaling
    This works like a top for OS X and Windows XP, just not Vista. I'd like to getting working properly for all machines.
    If anyone's got some advice on this one, I'd love to hear it.

    Here's a little more information regarding the issue:
    - It's an AirPort Extreme Wireless Router with Firmware ver. 7.1
    - The Windows Vista Ultimate PC has the most recent Microsoft patches to-date, and has the most recent Apple Airport Utilities Software to-date.

  • Installed CS3 with windows vista bit AE won't open.

    When my old faithful computer motherboard fried, I had to get a new computer with Windows Vista Home Premium.
    I had CS3 loaded and working without a glich on my old XP computer.
    I've loaded the whole CS3 suite, but when I open After Effects nothing happens. Using Window's Task Manager, under "Applications" After Effects doesn't show up as a running but under "Processes" the file "AfterFX.exe *32" is listed as running.
    I've also tried uninstalling CS3 and reinstalling it in the directory "Program Files" rather than in the directory "Program Files (x86)" and nothing changed.
    I've tried to opening all the other programs in CS3 with the similar results. Nothing opens, but their .exe files are listed under Task Managers "Processes".
    I'm using this as a vol lic product, so I'm not sure how much tech support I can get.
    Thank you for any help you can give me.

    I'm sorry it didn't work. I probably don't have an answer for you since I'm not an expert or anything.
    One thing I thought was weird was that the software version on my computer for the motherboard was version 6.xx (whatever) and the software I downloaded from the HP web was version 5.xx (whatever). It made it work though..
    I think the update would be on the HP site, not the MSI site. Go to hp.com, downloads, and put in the name of your computer. Download/install whatever motherboard software they have. If that doesn't work, go to the adobe website and search for the document kb402213 and work through that. It's what the person you give Adobe $40 to help you is going to do.
    Good luck. Hopefully this helps.

  • How to install Flash Player with Windows Vista 64 bit?

    IE 9, Windows Vista 64-bit, Flash Player quit working and won't install. Error Adobe Flash Player 11.1.102.55.  I have deactivated User Accounts and Security, gone to Windows\SysWOW64\Macromed\Flash and Run as Administrator NPSWF32_FlashUtil, and still not working.  One suggestion was to run an add-on from Macromedia, but that failed and I don't know what the add-on was.  Have also run System Restore and restored all my Internet security setttigs to default.  Nothing is working!

    If you can not see the moving sphere: http://kb2.adobe.com/cps/155/tn_15507.html
    Check the following:
    Enabling Flash Player in Internet Explorer 9
    ActiveX Filtering in Internet Explorer 9
    Also check this:
    In I.E.9, click Tools, click Internet options, click Security tab, ensure that the Internet security level is Medium-high.

  • Installing Flash Player with Windows Vista Home Premium

    I'm trying to install Flash Player on an older system running Windows Vista Home Premium. Do I need an older version of Flash Player?

    Actually, unlike Adobe Reader, Flash Player is officially supported on Vista: http://www.adobe.com/products/flashplayer/tech-specs.html

  • ITines is not compatible with Windows Vista Ultimate

    I tried 3 times to install (re-install) iTunes 7.3 so I could activate my iPhone. iTunes kept returning a message to uninstall and re-install iTunes, since some unknown piece of software was needed to recognize the iPhone. When will Apple fix this problem? I had to use an older WindowsXP machine to successfully activate the iPhone.

    Yes, I went through this too. I have Ultimate 64bit (came installed on my new HP Laptop - most of the new laptops are coming this way.
    I finally took my iPhone back, because the as the gal at the Apple store told me, they will never support 64 bit Windows OS.
    However I did read a post here that future versions of iTunes were expected to correct this. I sure hope so.
    Anyone know if the new iTunes 7.3.1 corrects or now allows for activation or synching with Vista 64 bit???

  • Itunes installation pckg error with Windows Vista

    I keep trying to install itunes onto my new computer and keep getting this message, "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package." Anybody else get irritating message? I WANT MY ITUNES! HELP!

    Are you logged on as the adminsitrator? Also you could try right clicking on the installer and choosing run as administrator.
    If that doesn't help, I wonder if this is a Visual basic script problem, see this Apple article:
    http://docs.info.apple.com/article.html?artnum=304405

  • Burning issues with itunes and Windows Vista Ultimate

    I recently purchased a new computer with Windows Vista Ultimate 64 bit version. Since loading itunes on my new computer I can not burn a CD. The message that I receive says that there is no burner available. I know the burner works because I have burned music out of different software programs. I have loaded and reloaded Nero 7 but I am finding that is not the problem. Itunes does not recognize any type of CD burner on my computer. Any thoughts?
    Thanks

    paul's onto it.
    if you run your DVD/CD diagnostics (in itunes "help > DVD/CD diagnostics", select DVD/CD diagnostics) and you see a 2380 error showing up down near the bottom of the diagnostics (you may need to scroll down a bit), try reinstalling the 64-bit version of the GEAR drivers iTunes uses for importing and burning.
    here's a link through to the GEAR drivers. note that there are two different versions of the 64-bit drivers. be sure to get the one that matches your hardware:
    GEAR drivers

  • Database connectivity toolkit problem with WINDOWS VISTA and Microsoft jet 4.0 provider

    Hi again,
    I'm experiencing a problem with Database connectivity toolkit and Microsoft Jet 4.0 provider (MS ACCESS mdb database).
    I was able to get my application to work properly on my PC: WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 and Msjet40.dll ver. 4.0.9511.0 (Windows XP SP3 and Security Bullettin MS08-028).
    The same connectivity toolkit seems to have problems (although I didn't get any error dialog) on a laptop with WINDOWS VISTA ULTIMATE, SERVICE PACK 2 and Msjet40.dll ver. 4.0.9755.0.
    Does anyone have an idea whether it is a sort of compatibility issue or a different thing?
    Would it be possible to include my DLLs into the installer in such a way LabVIEW application calls those DLLs instead of the ones it finds on the host PC?
    Thanks a lot. Any suggestion or advice very welcome and appreciated.

    I ran into this with Windows7 64 but, could not get the jet 4.0 to work.  Endnd up dumping access and used sql server express, its free, and all my code worked fine, just used a different UDL to connect.  I wasted lots of time trying to find a way of getting the jet4.0 to work with 64bit windows.
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • Live! Cam Voice - Microphone compatibility w/ Windows Vista Ultimate

    I recently got the Live! Cam Voice for my computer with Windows Vista Ultimate. And for some reason the built in microphone won't work at all - even the voice recorder, the Yahoo! Messenger in which it was built for and Windows Live Messenger. However the actual webcam works fine. Is there anyway to get the microphone to be compatible with Ultimate?

    HELLO CREATIVE!!!
    CAN YOU MAKE THIS CAMERA USEFUL?
    NEED NEW DRIVER!

  • Itunes problem with windows Vista

    ok i bought my touchsmart tx2 1025 with windows vista ultimate 64 bit and well i ve noticed that ..well since this is my third time i exchange this computer and i noticed there was a problem with the speakers when i was playing music that anytime during a song i would get this distorted sound like when u put a lot of volume in ipod headphones that it sounds like a crack. Well that happened in my computer even with low volumes.
    However I played two times the same song on itunes and two times on windows media player.
    Every single time on itunes the sound came as if the speakers were about to blow... like a crack..
    Every single time on Windows media player it never sounded like that.
    So i am pretty sure its an itunes problem. Does anyone know how to fix this.. i would rather use itunes than windows media player but i really hate the sound it makes sometimes because it shows about 2 to 3 times during one song.

    It's possible that the song your playing does indeed have a little audio distortion in it, some media players are capable of filtering it out in a silent way, others play a beep, hence with one song I have, if i play it in windows media player it goes on and then for a split second theres a beep, iTunes doesent seem to do it, so instead of filtering out the missing data, it plays it.
    This is more likley a problem with the song than iTunes

  • Help installing DW3 with Windows Vista

    I am trying to install Dreamweaver CS3 with windowa vista and
    I keep getting a error message "Internal Error 2739"?

    If that is a Vista error, search here
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

  • Windows Vista Ultimate & iPhone

    Yesterday I received an iPhone for my birthday and discovered it doesn't work with Vista Ultimate. When I called Apple care they told me that the box clearly states only "Vista" as compatible. I find this very odd since I don't know of a plain "Vista". There is Home,Home Premium, Business,Ultimate, etc..
    After some discussion they finally agreed to take it back without the restocking fee but I am still depressed about it.
    Has there been any news about support for ultimate? Why does my iPod and iTunes run perfectly but the phone won't?

    It doesn't work with Windows Vista 64-bit (I've tried) but it does work with Windows Vista Ultimate 32-bit. I'm using it now with no issues.

Maybe you are looking for