Installation gives error against core40.dll

Hello,
I'm trying to install dev 6.0. However when I try and install it I get an informational message that I have to close all Oracle applications cause there's an application using the core40.dll.
When I check for an Oracle application there appears to be none running. Even when I check using Oradim80.exe the only application that appears to be running is the oradim80.exe. Except off course the Oracle installer.
I'm using the Y2K compliant orainstall.
Can anybody tell what's causing this problem??
Thanks

1. Try removing any references to the OraWin95/OraNT path on autoexec.bat/NT environment
2. Reboot the machine
3. Install Dev6
4. Rewrite the Orawin95/OraNT references on autoexec.bat

Similar Messages

Solaris 10 installation gives error "No disk Found"

During the installation of Solaris 10 on dell XPS400, it gives error that says no Disk found:
I have already partitioned by disk in the following manner:
1st partition: 30 GB: NTFS (WIn XP installed)
2nd Partiion: 20 GB: NTFS (data)
3rd Partition: 25GB: RAW
is there any special setting that I need to do for Solaris to detect the hard disk.
Please help!

I do not think you need a driver for the disk.
... you need to reconfigure your system with respect to the DISK CONTROLLER.
Solaris 10 "doesn't do Serial ATA very well".
Search the forum, keyword sata and then read and read and read.
I believe you need to reconfigure something in the PC's BIOS.
However, that may have an impact on how well your current install of WinXP works.
So, I suggest you just go get an additional disk, a conventional IDE drive (not a SATA disk),
and install to that new drive instead.
Then you choose whichever device you want as the boot drive each time you power it on.
... or just go get an older, used computer and dedicate it to operating systems other than Windows. Leave the Dell system alone.
Install... erase ... install something else ... erase ...
etc, etc, etc

SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid

Hi All,
I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment.
For SCOM 2012 SP1, I choose SQL instance named SCOM. At first, I successfully installed SCCM 2012 SP1 Reporting Services. I have SSRS configured to use port 80 for both SCCM and SCOM instance, and not using SSL, with IP Address settings: All assigned. SQL
Server Agent services on both instances are configured to started automatically. I could access http://scsqlserver/reports_SCCM and http://scsqlserver/reporserver_SCCM, but could not for http://scsqlserver/reports_SCOM and http://scsqlserver/reporserver_SCOM.
On OpsMgrSetupWizard.log give error
[12:24:53]: Error:
:CheckHttpAddressResponse failed: Threw Exception.Type: System.Net.WebException, Exception Error Code: 0x80131509, Exception.Message: The remote server returned an error: (500) Internal Server Error.
[12:24:53]: Error:
:StackTrace: at System.Net.HttpWebRequest.GetResponse()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckHttpResponseFromSRSUrl(String httpSite)
I may continue Reporting Server installation that give no error mentioned above, if I choose SSRS instance named SCCM, but it is not supported for both SCCM and SCOM 2012 using same SSRS instance. Personal certificate for ConfigMgr SQL Server Authentication
on SQL Server has been exported and deleted. Restarting SQL Server also has been done, but no luck.
Many thanks for your help.

Hello,
I'm afraid you must use a dedicated instance of SQL Server for each site(SCOM/SCCM). Some similar issues were disscussed on this forum:
SCCM and SCOM - SQL Server
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/bfa14da9-4692-4c64-a107-e085c967d259
SCOM, SCCM, SQL on same server?
http://social.technet.microsoft.com/Forums/en-US/configmgrsetup/thread/b5373aa7-5233-4b1f-9b39-b86e481e04d5
Thanks,
Yog Li
TechNet Community Support

Installer gives error. [osx]

Hi,
Just trying to install latest flash, using latest installer file.
But when I run the installer, it gives error: "Unable to load application configuration".
I have redownloaded installer file, couple days a go, yesterday and today. Didn't help.
I'm running osx 10.8.3.
File permissions are fixed.
Firewall on/off, tested.
Thanks.

Looks like that there are lot of problems with installer on OSX.
I managed to install 11.7 using offline installer, http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac /install_flash_player_11_osx.dmg .

Updated itunes, error message about mobile popped up during installation, then after installation, tunes will not start. gives error that a dll file is missing.

I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access. After installation, Itunes would not open. Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download. Same problem with new download. Still does not open. I'm stumped. I have over 30,000 files in itunes and use it every day HELP

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

During Itunes installation gives error: Could not write value ManageLL....

Hi,
I have 2 PCs at home and on one itunes installed just fine but on another during installation i am getting the following error:
Could not write value ManageLLRouting to key \System\CurrentControlSet\Services\Bonjour\Service\Parameters
Anyone has an idea? Google didnt give me anything on such issue.
Will appreciate your help.

Hi clinton86,
Welcome to the Apple Support Communities! I understand that are receiving an alert when trying to import a CD to iTunes and are being asked to reinstall iTunes. iTunes and all of its components must be removed in a specific order when uninstalling from a Windows computer. Please use the following article as a reference.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
I hope this helps,
-Joe

FB 4.5 Premium installer gives error 1603

Downloaded Flash Builder 4.5 premium from the Adobe site, used Application Manager to create a deployable package. It bombs out with a 1603, no hints at all in the 237 kb log file as to why. Google isn't helping.

Trying to install FB 4.5 - comes up with this error on my machine - anyone have any concrete ideas on how to overcome this...
I've tried rebooting, removing activex plugins etc but of no help....
WARNING: DW031: Payload:{650C9D09-D5BD-4532-8BEE-01DBC1DF5537} Adobe Flash Builder 4.5 4.5.0.0 has been updated and has been selected for repair. The patch {CEAC4FFA-E7DE-4434-890A-F0AC7792DE5E} Adobe Flash Builder 4.5_4.5.1_AdobeFlashBuilder-mul 4.5.1.0 will be uninstalled now.
WARNING: DW031: Payload:{650C9D09-D5BD-4532-8BEE-01DBC1DF5537} Adobe Flash Builder 4.5 4.5.0.0 has been updated and has been selected for repair. The patch {CEAC4FFA-E7DE-4434-890A-F0AC7792DE5E} Adobe Flash Builder 4.5_4.5.1_AdobeFlashBuilder-mul 4.5.1.0 will be uninstalled now.
----------- Payload: {551D0A52-5E4A-4898-9FFF-FEAA5E89585A} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\DOCUME~1\nanunh\LOCALS~1\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\DOCUME~1\nanunh\LOCALS~1\Temp\InstallAX.exe, command: -install activex -msi
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 6 - Silent workflow completed with errors.
[ 1460] Mon Aug 15 17:52:20 2011 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

When trying to copy something into InDesign it crashes and gives error faulting MSVCR90.dll ?

I am IT support person for one of our clients and they are complaining about InDesign crashing every time they try to copy text from Ms Office or Open Office. I checked the event logs I found the following error is thrown many times:
Faulting application name: InDesign.exe, version: 7.0.4.553, time stamp: 0x4d890440
Faulting module name: MSVCR90.dll, version: 9.0.30729.4940, time stamp: 0x4ca2ef57
Exception code: 0xc0000005
Fault offset: 0x0003b36a
Faulting process id: 0x9a8
Faulting application start time: 0x01cd36dcfcee3866
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS5\InDesign.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4940_none_50916076bcb9a742\MSVCR90.dll
Report Id: 482cfdbe-a2d0-11e1-8bdb-bcaec5e1a2cd
Would appreciate any help you could provide.

Tangent:
I would recommend this Wiki entry: http://en.wikipedia.org/wiki/WinDbg
Begin with the first link in the list at the bottom.
OK, Mike, you've got me. Why would you recommend a Wikipedia entry only to say that someone should start with the first link at the bottom? Why not link directly to whatever it is you want to link to?
I'm also kind of confused...are you recommending How to install Windbg and get your first memory dump, blogs.msdn.com/b/johan/archive/2007/01/11/how-to-install-windbg-and-get-your-first-memory -dump.aspx?
If so, you have me puzzled. It's not wrong information, but we don't want a memory dump. We just want a stack trace. That's the 'kp' command, I believe. I don't have a nice fancy URL to recommnd, so maybe I shouldn't nitpick yours, but it doesn't look very helpful for the problem at hand.
p.s.: it also seems to recommend loading a bunch of extensions that are not helpful here. Like SOS. All that's needed is the core WinDBG.

After upgrade to 9.01 startup of firefox gives error message MOZCRT19.dll was not found

After the upgrade to firefox 9.01 with windows xp I get every time firefox tries to launch the error message "This application has failed to start because MOZCRT19.dll was not found. Re-installing the application may fix this problem".
Well, re-installing does not fix this problem!
I even de-installed firefox, cleared all folders with the hint of mozilla or firefox in its name and did the same with the registry, re-installed firefox 9.01 but always get the same result.

If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
See this for a similar issue caused by ZoneAlarm:
*[[/questions/880050]]
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update

New Relic APM installation gives error

I can't seem to add the New Relic APM extension anymore. I wanted to add it to two VM's that were already created. Because I didn't New Relic offered it directly through the new portal I tried creating it using the NewRelic Azure packages. When this didn't
work I found out about the direct way using the new portal, which worked on VM1 and not two. Going to two I saw that NewRelic was still installed on 2 in the old way, removed it, removed the generic New Relic APM, removed it from server 1 and gave both a reboot
so I'd start with a clean slate and do it perfectly right this time. The two VM's seem perfectly fine, but I can't seem to add it to my subscription anymore.
I get two failed events besides the Microsoft Resources event that notifies me of the failure of the deployment:
NewRelic.APM/Accounts/write 2x
with error message:
statusCode:NotFound statusMessage:{"error":{"code":"BadRequest","message":"\n<hash>\n <error>The requested page could not be found</error>\n</hash>\n"}}
Any thoughts?

Hi,
I understand that you are unable to add New Relic APM Extensions through the New Portal and unable to associate with your subscription.
You might want to refer to the below link which explains about creating New Relic APM Account in the New Preview Portal
https://docs.newrelic.com/docs/agents/net-agent/azure-installation/azure-preview-portal
If the issue still persists, Suggest you to raise a Billing Ticket for the same by following the below link
http://azure.microsoft.com/en-us/support/options/
Hope this helps !
Regards,
Sowmya

ITunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more

iTunes gives me an error and asks for re-installation, the error is "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library coreMedia.dll", and the iTunes can not be lunched any more.
can you please help, as I also tried to re-install it but pr

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Calendar Server installation gets error "libnmspr20.dll not found"

Calendar Server installation gets error "libnmspr20.dll not found"
<P>
When installing Calendar Server 3.5 on NT near the end an error
occurs: "libnmspr20.dll not found " and then it will exit the setup
without completion.
This is a bug because it is looking for the libnmspr20.dll in the
system path but the Calendar Server installation has left it in a
temp directory. This does not occur if the Netscape Messaging Server
has been previously installed on the same host. A workaround is, when
the error message displays, you DON'T press ok, but search your
computer for the missing file (usually found in temp-directory).
You then copy the file to a directory in your system path. Now you
can press the OK button and the installation will fail. Re-install
the calendar server, this time the installation won't fail.

Installing Latest JRE on NT4 sp6a produces the same error:
InstallShield DLL Custom Action:
File 'C:\TEMP\RegUtils.dll' can not be found. Make sure the file is on the target system or installed already.
I searched www.installshield.com since the error is an installer error and the installer is InstallShield. NO results found there either.
Seems like the installer team needs to brush up on the NT4 platform.

'error in MSVCRT.DLL' when i try to open installer

hi,
i was trying to install J2SE 1.4.2, the file is complete and not corrupted but when i try to open the
installer program i get this message:
The program has caused an error in MSVCRT.DLL
what can i do to make it work?
thanks,
nick

Maybe one of these match your problem. If not, serch other forums, Google, etc.
http://onesearch.sun.com/search/developers/index.jsp?col=devforums&qp_name=Installation&qp=forum%3A14&qt=MSVCRT.DLL

When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start". After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing". I downloaded MSVCR80.dll.

When I open iTunes I get an error message "MSVCR80.DLL missing". I downloaded this .dll and installed in C:\Windows|System32. I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Installation gives error against core40.dll

Similar Messages

Maybe you are looking for