Installation Groups with Hierarchies

Hi Experts ,
If anybody of you ever worked on Installation Groups with Hierarchies (Multilevel Main & Sub) please share the Document or provide me the link .

Manoj:
Asking for documentation is not the appropriate approach in the forums. Please read Research Resources and Rules of Engagement. Ask a specific question, indicating what you have tried and where you have failed or are having issues.
This thread is locked.
regards,
bill.

Similar Messages

Help - Installation Groups with Hierarchies

Hi experts ,
I created Installation Grouping with Hierarchies Set-up (Please find the attached Doc)
Using UTILIT85 Variant to derive Primary Installation billing relevant consumption , & Billing of primary is happening perfectly fine but When I am performing Billing of 2nd level Secondary installation (Which also have 3rd level Secondary installations) 3rd level installations consumption is not deducting from this 2nd level Secondary installation .
If I check DBERCHV table for Primary Bill Doc then there is -ve consumption line present for this installation , But during billing system is not deducting this consumption from Secondary meters consumption .
Please tell where I am doing wrong or what step I am skipping .
Please find the attachment with more clarity (What exactly I am doing)

Manoj:
Asking for documentation is not the appropriate approach in the forums. Please read Research Resources and Rules of Engagement. Ask a specific question, indicating what you have tried and where you have failed or are having issues.
This thread is locked.
regards,
bill.

Security issue with the SGA and multiple installation group.

Hi,
Documentation ARE WRONG:
http://download.oracle.com/docs/cd/E11882_01/rac.112/e10743/preparing.htm#TDPRC131
# useradd -u 1100 –g oinstall -G dba -d /home/oracle -r oracle
http://download.oracle.com/docs/cd/E11882_01/install.112/e10816/typinstl.htm#CWSOL156
# useradd -u 1100 -g oinstall -G dba oracle
The "-g" and "-G" must be exchange!
In an advanced installation with multiple Oracle users call them ( ora1, ..., orai, ..., oran )
with multiple OSdba group defined users call them ( dba1, ..., dbai, ..., dban)
Associate each oracle user to a dba group with the same number and the install group as oracle told it.
User ora1 group dba1
User orai group dbai
User oran group dban
Now make the software installationS with the group OSinstall ( install) as written in the documentation, in 3 Oracle_home
Call the oracle_home1, oracle_home2, oracle_home3
Now check semaphores, Sharedmemory and files!
ipcs -msa
IPC status from <running system> as of Thu Apr 29 12:14:06 CEST 2010
T ID KEY MODE OWNER GROUP CREATOR CGROUP NATTCH SEGSZ CPID LPID ATIME DTIME CTIME
Shared Memory:
m 16777246 0x6525858 rw-rw-- oracle2 install oracle2 install 36 5368725504 3479 4298 12:10:01 12:10:31 16:30:45
T ID KEY MODE OWNER GROUP CREATOR CGROUP NSEMS OTIME CTIME
Semaphores:
s 50331701 0xb7892c1a ra-ra-- oracle2 install oracle2 install 202 16:30:47 16:30:45
s 50331700 0xb7892c19 ra-ra-- oracle2 install oracle2 install 202 no-entry 16:30:45
s 50331699 0xb7892c18 ra-ra-- oracle2 install oracle2 install 202 12:13:48 16:30:45
ls -l $OSD/oradata/*/*/* | sed s/oracle/oracle2/
-rw-r----- 1 oracle2 install 11600384 Apr 14 18:30 /app1/oracle/admin/ora11g/oradata/ORA11G/changetracking/o1_mf_5wcsdcfh_.chg
-rw-r----- 1 oracle2 install 11600384 Apr 15 15:08 /app1/oracle/admin/ora11g/oradata/ORA11G/changetracking/o1_mf_5wf7787k_.chg
-rw-r----- 1 oracle2 install 11600384 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/changetracking/o1_mf_5wg8jggf_.chg
-rw-r----- 1 oracle2 install 16695296 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/controlfile/o1_mf_5wg4j9go_.ctl
-rw-r----- 1 oracle2 install 524296192 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_aud__dol_5wg4mntr_.dbf
-rw-r----- 1 oracle2 install 104865792 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_aud__dol_5wg4mp3v_.dbf
-rw-r----- 1 oracle2 install 209723392 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_example_5wg4ml5z_.dbf
-rw-r----- 1 oracle2 install 419438592 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_stat_dba_5wg4mmhg_.dbf
-rw-r----- 1 oracle2 install 2097160192 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_sys_undo_5wg4kf8n_.dbf
-rw-r----- 1 oracle2 install 2097160192 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_sys_undo_5wg4lss2_.dbf
-rw-r----- 1 oracle2 install 1363156992 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_sysaux_5wg4k1xf_.dbf
-rw-r----- 1 oracle2 install 1048584192 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_system_5wg4jp26_.dbf
-rw-r----- 1 oracle2 install 209723392 Apr 28 22:01 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_temp0_5wg4l302_.tmp
-rw-r----- 1 oracle2 install 209723392 Apr 15 16:06 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_temp1_5wg4lsod_.tmp
-rw-r----- 1 oracle2 install 104865792 Apr 29 03:05 /app1/oracle/admin/ora11g/oradata/ORA11G/datafile/o1_mf_users_5wg4l33f_.dbf
-rw-r----- 1 oracle2 install 104858112 Apr 29 13:05 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_1_5wg4jb44_.log
-rw-r----- 1 oracle2 install 104858112 Apr 28 21:00 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_2_5wg4jdn6_.log
-rw-r----- 1 oracle2 install 104858112 Apr 28 22:00 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_3_5wg4jgw8_.log
-rw-r----- 1 oracle2 install 104858112 Apr 29 03:00 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_4_5wg4jk64_.log
-rw-r----- 1 oracle2 install 104858112 Apr 29 13:01 /app1/oracle/admin/ora11g/oradata/ORA11G/onlinelog/o1_mf_5_5wg4jmcd_.log
ls -l $OH/bin/oracle | sed s/oracle/oracle2/
-rwsr-s--x 1 oracle2 install 256263032 Apr 14 13:54 /app1/oracle/product/11.2.0_64/db_1/bin/oracle*
That the evidence the documentation provide you a wrong way to do it!
François LANGE

The right document syntax for this is:
UNIX: Do I Need To Use The "oinstall" Group? (Doc ID 463052.1)
FRançois

How to setup Business Group with Global Legislation?

Hi All,
We are exploring possibility of creating International Business Group with no Legislation Code for our client. The client has operations in multiple geographies.
I found following document in Metalink
How an International Business Group be created with no Legislation Code? [Doc ID 851711.1] It mentions "Global legislation must be installed in order to set up a Global Business Group. The business group is created just like any other, but with Global legislation selected. You will need to use Global responsibilities to access it."
When we tried to create a business group with Legislation Code as 'Global" we did not find any such Legislation Code in dropdown of *Business Group Info classification.
Has anybody implemented Global Legislation before? Any information on Setup Steps, Challenges faced, bugs and issues faced with other modules especially OTL would be appreciated.
Thanks in Advance,
Amit
Edited by: user10450466 on Jan 22, 2010 12:23 AM

I wasn't aware there's any such thing as 'Global Legislation' in HRMS and I think the Metalink Note you mention is misleading. There are multiple concepts here being mixed up.
hrglobal and Data Installer
Oracle deliver legislative seed data through hrglobal and Data Installer. When a DBA runs this they pick the legislations they wish to install. That includes legislations such as US, GB and all legislations where Oracle HRMS deliver seed data (Fast Formulas, balances, etc). One of the options here is 'Global', which ensures that common seed data used across multiple legislations is installed. This process does not create new legislations - it just creates the seed data used by those legislations. 'Global' is not a legislation - it just means that the relevant seed data (Fast Formula, balances, etc) is typically delivered without the legislation_code column being populated.
Business Groups and Legislations
A Business Group is intrinsically tied to a Legislation Code - they have a one-to-one relationship. When you define a Business Group you have to pick a Legislation and that list of Legislations comes from fnd_territories_vl. The list in fnd_territories_vl has nothing to do with hrglobal or Data Installer. There is no 'global' territory.
International HR & Payroll
If you are implementing HRMS in a country where Oracle HRMS do not deliver any specific legislative seed data or functionality (ie, the legislation isn't listed in Data Installer) you have the option of using International HR & Payroll. This allows you to install generic seed data into the legislation of your choice, which is again a list from fnd_territories_vl. Again, there's no concept of 'global' legislation. Information on that is available here:
International HR and Payroll [ID 261452.1]
International Implementations
Customers, like yours, who are rolling out Oracle HRMS to multiple countries have a big choice to make: single or multi Business Group. If you opt for one Business Group you create employees in multiple countries all within the same Business Group. That Business Group is tied to just one of those country's legislation codes - which you go for is up to you but that's generally the Legislation Code of the International HQ. The problem with this approach is that you can't leverage the legislative-specific functionality for each of the other countries.
If you opt for multi-Business Group you typically define one Business Group for each country so that you leverage the legislative-specific functionality for each country. This is generally more popular but doesn't suit everyone: you can have problems with employees transferring from one country to another, etc.
Global Structures
Oracle HRMS has forced you to tie a Business Group to a legislation code for many years. As mentioned above, this causes a number of problems. To mitigate those, Oracle have delivered a number of enhancements that help you model global businesses:
1. Global Organization Hierarchies
2. Global Security Profiles
3. Global Overseas Deployment functionality (nickname GOD/GOLD)
4. Cross Business Group profile option
5. etc
I hope that helps.

Some of the build-in panels are grouped with my plugin's panel in InDesign CC

My settings for PanelList look like this:
resource LocaleIndex (kSDKDefPanelResourceID)
{ kViewRsrcType,
{ kWildFS, k_Wild, kSDKDefPanelResourceID + index_enUS }
/* PanelList definition.
resource PanelList (kSDKDefPanelResourceID)
    // 1st panel in the list
    kSDKDefPanelResourceID, // Resource ID for this panel (use SDK default rsrc ID)
    kMyPluginID, // ID of plug-in that owns this panel
    kIsResizable,
    kMTPanelWidgetActionID, // Action ID to show/hide the panel
    "MyPlugin:Test", // Shows up in the Window list.
    "", // Alternate menu path of the form "Main:Foo" if you want your palette menu item in a second place
    0.0, // Alternate Menu position Alternate Menu position for determining menu order
    kMyImageRsrcID, kMyPluginID, // Rsrc ID, Plugin ID for a PNG icon resource to use for this palette (when not active)
    c_Panel
resource MTPanelWidget(kSDKDefPanelResourceID + index_enUS)
__FILE__, __LINE__,     // Localization macro
kMTPanelWidgetID,       // WidgetID
kPMRsrcID_None,         // RsrcID
kBindAll,              // Binding (0=none)
0, 0, 320, 386,         // Frame: left, top, right, bottom.
kTrue, kTrue,           // Visible, Enabled
kTrue,                 // Erase background
kInterfacePaletteFill, // Erase to color
kMTPanelTitleKey,       // Panel name
"MyPlugin" // Popup menu name (internal)
The problem is that when I click Window->MyPlugin->Test the built-in panels Articles, Liquid Layout and CrossReferences are also opened and grouped with my panel. I can't understand what I am doing wrong. The situation is the same with all sdk samples that have panels. Please help. 10x in advance.

Hi, I had the same problem with mine. I've managed to partially fix it by using a workspace extension.
This is the documentation for it:
Remove the InDesign preferences folder. This ensures that changes made to the workspace extensions appear when InDesign is launched.
Launch InDesign with your plug-ins loaded, so your panels are available in the user interface.
Organize the panels as you want your user to see them for the first time.
Exit InDesign normally.
Locate the “Essentials_CurrentWorkspace.xml” file in the InDesign preferences folder. Duplicate the file and rename the duplicate to the name that you want to use for this workspace extension.
Distribute/Copy the workspace-extension XML file in the InDesign Workspace Extension folder (<app folder>/Presets/InDesign Workspaces/en_US/Workspace Extensions). If the “Workspace Extensions” folder does not exist, create it. The easiest way to distribute the workspace-extension XML file might be in the same installer used to install your plug-ins.
I followed that, and my panels appeared in their own group, as I had laid them out.
However, if I didn't delete my user preferences, the ordering and position was different to how I'd laid them out.
Launch InDesign - move standard panels to make a custom user layout - install plugin - relaunch InDesign - launch plugin panels:
The panels seemed to appear in a random position and order, but in their own tab group - no longer bundled with Artices etc
Then delete user prefs - relaunch InDesign - launch plugin panels:
My custom panel layout appears exactly correct over the default workspace layout.
Obviously, you don't want the user to have to delete their preferences and lose their custom layout, so it's not perfect, but at least it got rid of Articles etc. If your plugin is a single panel, it might just do what you need.
I expect there's a way to solve the random position/order too - I just haven't found it!

Problem with Hierarchical query

Gurus,
I have a problem with hierarchical query, which I am pasting below.
select sys_connect_by_path (Fname,'/')"PATH",Fname,id,level
,(SELECT COUNT(ID)-1 FROM (SELECT CONNECT_BY_ROOT LNAME LNAME,ID FROM CMT_PERSON
START WITH ID = 'emplo000000000126009'
CONNECT BY PRIOR ID=MANAGER_ID)
GROUP BY FNAME)"COUNT"
from CMT_PERSON
WHERE
LEVEL <= 4
----And ID='emplo000000000001877'
CONNECT BY PRIOR id=manager_id
----AND NOT LEVEL > 3
START WITH ID='emplo000000000126009'
As per the result, count is getting repeated for all the levels. That is, count is coming 16100 for every level, Can you please help where exactly I am going wrong
Regards

You do not say anything about what count you want to get?
A wild guess could be:
select
   sys_connect_by_path (p1.fname, '/') "PATH",
   p1.fname,
   p1.id,
   level,
   (select count (id) - 1
    from
       (select connect_by_root p2.lname lname, p2.id
        from cmt_person p2
        start with p2.id = p1.id
        connect by prior p2.id = p2.manager_id)
    ) "COUNT"
from cmt_person p1
where level <= 4
connect by prior p1.id = p1.manager_id
start with p1.id = 'emplo000000000126009';Since your inner query simply starts with the hardcoded employee id, naturally it will give you the same count.
My guess is your inner query should start with the person id from the outer query?
If that is not the case - please state in plain english what you are trying to accomplish ;-)
(Oh, and please paste code within tags so we can read it more easily...)

Database instance: You are not a member of the specified Installer group

Hi,
When I start ./RUNINSTALLER in HP-UX to install oracle, as a part of database instance instalation of SAP, the following message appeared.
"The Oracle Universal Installer Inventory on this system does not exist or is not writable. the possible cause are:
        1. The /tmp/orainstRoot.sh script was not executed with root priveleges, or an error occured during execution
        2. You are not a member of the specified Installer group"
Mention that I have executed the script by root user without any error.
Requesting your kind help to solve the problem.
Regards
Wahid

Hi,
I am trying to install oracle 9i as required by SAP ECC 5.0. Instance name is PRD as disaster recovery will be tested in that system. In the same time our SOLMAN is running in that system with database oracle 10g. We are planning to run parallel process in same time SOLMAN and DR PRD.
Till now we have done SAP Central instance installation. While trying to install database instance SAP asked to go /oracle/stage/920_64/Disk1/SAP and run the script RUNINSTALLER in HP-UX system for oracle.
To do this I have done the following
a. Logged on the system as oraprd
b. Set up environmental variable
          ORACLE_HOEM to /oracle/PRD/920_64
          DISPLAY to My work station IP:0.0
and started OS> ./RUNINSTALLER
After some time a window appeared headed by "Inventory Location"
I Specified base directory /oracle/oraInventory and pressed OK.
Then a window asked to run script /tmp/orainstRoot.sh by root user and then press continue
The script run successfully by user root. But when I press continue the following message appeared.
The Oracle universal Installer Inventory on this system does not exist or is not writable. The possible cause are:
        1. /tmp/orainstRoot.sh script was not executed with root priveleges or an error occured during execution.
        2. You are not a member of the specified Installer group.
Please help me how can I resolved the problem.

Billing using Installation Group

Hi,
Following is the scenario :
I have created two Devices 1 and 2. After technical installation of both the devices,Serial switching relationship maintained between 1 and 2 with 1 as the Main register and 2 as the Secondary register.
With ES32, Primary installation and Secondary installation are created. For the Primary installation, Grouping type is assigned.
For the Secondary installation, the installation role and Primary installation number are assigned. Different Rate categories are assigned to these primary and secondary installation. Rates are maintained with correct vairable programs suitable for installation group.
Configuration (Define Billing Rules for Installation group) is setup in such a way that only data exchange happens from Secondary to Primary (i.e) Consumption-relevant.
Billing relevant installation (EG34) of the secondary device is done against the secondary installation.Billing relevant installation (EG34) of both main and secondary device is done against Primary installation. This was done because the system insists
that both the devices in the register relationship should be installed in the primary installation.
Move-in process is executed for the both the installation, as a result, two different contracts created.
Meter reading results are entered for the Secondary Installation. Because of the Register relationship maintained, Meter results are entered for the both the registers.
Device1 : 150 kwh for the month of Jan
Device2 : 100 kwh for the month of Jan
While billing is executed (EASIBI) for the secondary installation, system calculated amount for 100 kwh.
Now, When I execute billing for primary installation, system throws the following error :
"Device 1 Register 001 has negative consumption deduction".
Expected behaviour is the system should calcuate for 50 kwh (150kwh - 100 kwh).
Can anyone help me to understand why this error occurs ?
Regards,
Sathya.

Hi ,
If you are using Installation grouping in that case you do not have to define serial switching relationship between primary and secondary register.
In case of Installation grouping ,billing relevant installation for Primary device is done at primary installation and secondary device is installated at secondary installation.
Please remove serail switching relationship and also correct the billing relevant installation for primary & secondary device and then try to bill both Installation.
Hope this helps.

New consolidation group with wrong values

Hi all,
We are working with SEM-BCS 6.0 and we are having an issue that we hope you can help us.
At 012.2008 we have created a new consolidation group (N002) with the consolidation unit 0100.
This consolidation unit (0100) also exists in consolidation group (H001) since 006.2008.
The problem is that at 012.2008 when we use the posting logic u201Cstandardu201D the account values are correct in the consolidation group that used to exist (H001), but for the new consolidation group (N002) the account values are only the delta values.
For example:
011.2008
Account 111000 = 50.000u20AC
012.2008
Account 111000= 60.000u20AC
At 012.2008 in the consolidation group (H001) we have the 60.000u20AC but in the consolidation group N002 the account only has 10.000u20AC (delta)
But if the new consolidation group (N002) only exists since 012.2008 and for the consolidation unit 0100 the first consolidation is defined as 012.2008 why is only being considered the delta (10.000u20AC) and not the all value (60.000u20AC)?
Thanks for your help.
Best regards

We are using the cumulative type of data storing.
Sorry, you can't. It's the system that always stores data periodically. You may just load data cumulatively.
Regardless of type of your load data in the system is always kept periodically.
> The reason for the appearance of this company in another group is only because they want to do a u201Csecondu201D consolidation considering a different group of companies by consolidation area.
> That is, they want to consolidate both consolidation groups with the same companies but with them being considered differently by consolidation areas.
> Is like the second consolidation group is a simulation.
Sorry, Ricardo, I cannot read it in business terms. Different hierarchies, dif. ConsAreas, dif. groups... I do not see why and what for.

Report performance with Hierarchies

Hi
How to improve query performance with hierarchies. We have to do lot of navigation's in the query and the volume of data size very big.
Thanks
P G

HI,
chk this:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Query Performance Is "Aggregates" the way out for me?
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
° the OLAP cache is architected to store query result sets and to give all users access to those result sets.
If a user executes a query, the result set for that querys request can be stored in the OLAP cache; if that same query (or a derivative) is then executed by another user, the subsequent query request can be filled by accessing the result set already stored in the OLAP cache.
In this way, a query request filled from the OLAP cache is significantly faster than queries that receive their result set from database access
° The indexes that are created in the fact table for each dimension allow you to easily find and select the data
see http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6473e07211d2acb80000e829fbfe/content.htm
° when you load data into the InfoCube, each request has its own request ID, which is included in the fact table in the packet dimension.
This (besides giving the possibility to manage/delete single request) increases the volume of data, and reduces performance in reporting, as the system has to aggregate with the request ID every time you execute a query. Using compressing, you can eliminate these disadvantages, and bring data from different requests together into one single request (request ID 0).
This function is critical, as the compressed data can no longer be deleted from the InfoCube using its request IDs and, logically, you must be absolutely certain that the data loaded into the InfoCube is correct.
see http://help.sap.com/saphelp_nw04/helpdata/en/ca/aa6437e7a4080ee10000009b38f842/content.htm
° by using partitioning you can split up the whole dataset for an InfoCube into several, smaller, physically independent and redundancy-free units. Thanks to this separation, performance is increased when reporting, or also when deleting data from the InfoCube.
see http://help.sap.com/saphelp_nw04/helpdata/en/33/dc2038aa3bcd23e10000009b38f8cf/content.htm
Hope it helps!
tHAK YOU,
dst

How can I update an already saved "bookmark all tabs" group with a current group of tabs? Or add only the changes??

Example of problem:
I have already saved a group of tabs using the "bookmark all tabs" feature.
I open that group of tabs in a new browser window.
Then I modify that group of tabs that I have open, adding new ones, removing old ones.
How can I replace the existing tab group with the new tabs?
Is there an option to just add the new ones that I have opened and keep all the others even if I have removed some of the old ones from the currently opened group?
...another issue: can I share bookmarks online? What are the options for this?

You can't do that.<br />
Each time you use "Bookmark All Tabs" a new folder is created, even if you give the folder the same name, so you will have to do any merging yourself in the Bookmarks Manager or just create a new group and discard (delete) the previous group.
If you want to share bookmarks online then you need to use a web based service that offers such a feature like Delicious.
*http://en.wikipedia.org/wiki/Social_bookmarking

Oracle 9i installation problem with RedHat 7.2 (segmentation violation)

I have try to installation 9i with RedHat 7.2 by x windows.
when i use xwin to run the "./runInstaller, i got the error
(segmentation) as below:
i have already try to follow the installation procedure in
http://staff.in2.hr/denis/oracle/901install_rh72_en.html#1 but
still got this error.
Can anyone help me??
Regards
Chris Sung
=================================================================
===============
oracle install
Connecting 192.168.1.3 via TELNET
Thursday, December 13, 2001 1:04:06
Red Hat Linux release 7.2 (Enigma)
Kernel 2.4.7-10 on an i686
login: oracle
Password:
Last login: Thu Dec 13 00:46:39 from apple
[oracle@orange oracle]$ (/home/oracle/Disk1/runInstaller -
display 192.168.1.2:0
-name "oracle install" &)
[oracle@orange oracle]$ Initializing Java Virtual Machine
from /tmp/OraInstall/jre/bin/jre. Please wait...
SIGSEGV 11* segmentation violation
     stackbase=0xbffff298, stackpointer=0xbffff160
Full thread dump:
"Finalizer thread" (TID:0x4276d210, sys_thread_t:0x4d0bfe0c,
state:R) prio=1
"Async Garbage Collector" (TID:0x4276d258,
sys_thread_t:0x4d09ee0c, state:R) prio=1
"Idle thread" (TID:0x4276d2a0, sys_thread_t:0x4d07de0c,
state:R) prio=0
"Clock" (TID:0x4276d088, sys_thread_t:0x4d05ce0c, state:CW)
prio=12
"main" (TID:0x4276d0b0, sys_thread_t:0x80d6fe8, state:R)
prio=5 *current thread*
     java.lang.System.initializeSystemClass(System.java)
Monitor Cache Dump:
Registered Monitor Dump:
Thread queue lock: <unowned>
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Dynamic loading lock: <unowned>
Monitor IO lock: <unowned>
Child death monitor: <unowned>
Event monitor: <unowned>
I/O monitor: <unowned>
Alarm monitor: <unowned>
     Waiting to be notified:
     "Clock" (0x4d05ce0c)
Monitor registry: owner "main" (0x80d6fe8, 1 entry)
Thread Alarm Q:

Strange, but yesterday I nter in Oracle9i install, open
gnome-terminal window as oracle user and simply type
/tmp/Disk1/runInstaler
the DISPLAY enviroment variable was set,
using RedHat 7.2 , kernel 2.4.16-0.9, glibc-2.2.4-19
Segmentation violation 11 may mean RAM problem, sometimes
incorrect program pointer.So I think it must work (runIstaler)

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Limitation on source group with services using ip address range

Hello,
I have an interface on CSS which I regard as public and another interface I regard as private. On the private interface is a server farm with private ip addresses. Since the server admin guys insisted the servers need to access internet just for Windows Update, I made a source group to NAT the private addresses to public addresses to allow the servers to access internet.
I defined services for use by the source group. Since keepalive is not important in this case, I set keepalive none to ,I hope so, save system resources.
I have server 192.168.1.1-5 (5 servers) and 192.168.1.11-14 (4 servers), so I made a service with ip address 192.168.1.1 range 5 and another service 192.168.1.11 range 4.
But then I found that the two services cannot be put in the same source group. It is because of the different range in the service definition.
I can get it work if I define services with single ip address, but then I will have a long configuration with repetative information. And I think this may be using more system resources.
I can also get it work if I include 192.168.11.15 and define two services both with a range of 5 ip addresses. But 192.168.11.15 is not actually there.
Why is there such a limitation on source group, or services with ip address range? Is there the same limitation for content rules? Or am I getting it all wrong and should do the configuration in other ways?
Advices will be welcomed.
CT Yau
Hong Kong

Yes you are correct. There is a limitation while adding services into source groups.
You can create as many services that share an ip range (eg. a /24 subnet range). But the trouble starts when you add them into source groups. You can not add them into a source group NOR you can add them under different source groups as well.
You mentioned that you can use single ip adress instead of range for the services...but it is not true as you will be stuck when you add them into source groups.
I can think of these following options in your case.
Option 1
Change the ip range on the servers. Use 2 different IP ranges one for those 5 servers and another for those 4 servers.
Create 2 services for each range.
Create 2 groups and add the services.
service server-out-192.168.1.1-5
ip address 192.168.1.1 range 5
active
service server-out-172.168.1.11-14
ip address 192.168.1.11 range 4
active
group server-out-192.168.1.11-14
vip address x.x.x.1
add server-out-192.168.1.1-5
active
group server-out-172.168.1.11-14
vip address x.x.x.2
add server-out-172.168.1.11-14
active
Option 2
Create a service that includes all the ip addresses starting from 192.168.1.1 through .14 using the range keyword.
Now you need to create one source group with a VIP. Add the service to the source group.
If you do not want to cover the unassigned ip addresses just move them up and use consecutive ones.
service server-out-192.168.1.1-14
ip address 192.168.1.1 range 14
active
group server-out-192.168.1.11-14
vip address x.x.x.x
add service server-out-192.168.1.1-14
active
thanks

Installer failure with Acrobat Reader Xl on Macbook Pro with OS 10.8.

Installer quits with Installation error
Here is the error message I receive. I am clueless what this means and why I am having trouble
"dyld:DYLD_environment variables being ignored becuase main executable (/System/Library/PrivareFrameworks/Iinstall.framework/Resoures/runner) is setuid or setgid installer;Package name is Adobe Reader X1(11.0.01. Installer: Installing at base path /Installer: the install failed (the installer encountered an error that casued hte installation to fail. Contact the softwware manufacturer for assistance)"
I know this is free software but , really,there should be assistance understanding this type of message and help with a solution.NEVER had trouble with reader in all the years i have happily used it

i would like to thank adobe for ignoring this question for almost 5 solid months. Way to go adobe.
Please insert annoying diatribe for adobe not signing their freaking adobe certificate package for 10.8.3   REALLY?
Steps I followed
Uninstalled all my CSS applications
Ran the pretty much useless CS Cleaner
Tried to delete anything and everything that said adobe in all the cache directories. (someone had a nice post on problems with cs3 that i tried to emulate)
Lost count of the number of reboots and attempted reinstalls
completely disabled apple security for applications
Enabled Root user
Opened terminal root
ih8adobe4beingMS:/ root# installer -pkg "Adobe Reader XI Installer.pkg" -target /
installer: Package name is Adobe Reader XI (11.0.02)
installer: Certificate used to sign package is not trusted. Use -allowUntrusted to override.
          8. Qbert diatribe for probably 15 mintues
   Steps to resolve
downloaded full version, with already downloaded stuff. http://www.adobe.com/support/downloads/detail.jsp?ftpID=5561 (google: Adobe Reader 11.0.02 full installer - English)
copied installer to / (root directory)
ran
ih8adobe4beingMS:/ root# installer -pkg "Adobe Reader XI Installer.pkg" -target / -allowUntrusted
output:
installer: Package name is Adobe Reader XI (11.0.02)
installer: Installing at base path /
installer: The install was successful.
used spotlight and opened adobe, accepted license agreement.
dear adobe: please feel free to send me a free upgrade on my CSSX to the latest version.
[update: i corrected a typo in the word license]

Installation Groups with Hierarchies

Similar Messages

Maybe you are looking for