Installation halts - probably because of sapdb.inf
Hello fellow SAP admins
I'm trying to install SAP solution manager/netweaver 7.0 on a Sun Sparc T2000 with Solaris 10. The installation works fine until I get to phase 13 of 47: "Create database schema". I don't get an error message, but the installation halts and I can read the following from the promt:
"File sapdb.inf does exist. Will use the commands in file sapdb.inf."
Everything seems to work and I cannot locate logfiles that tell me otherwise.
XCMDOUT.log ends with the following:
> Subprocess starts at 20080513084428
Execute Command : /sapdb/programs/bin/dbmcli -n SunT2000 -d BDS -u control,********
Start subprocess as user with uid: root
Execute Session Command : sql_connect superdba,********
Execute Session Command : sql_execute SELECT VALUE FROM DBPARAMETERS WHERE DESCRIPTION='_UNICODE'
Execute Session Command : exit
> Subprocess stops at 20080513084430
OK
OK
END
'YES'
Any ideas?
NB: You can find a similiar unsolved post by David Ingersoll from Mar 31, 2008 3:30 PM by searching the term "sapdb.inf".
Thanks in advance..
/Peter
Here goes:
'ptree' returs (amongst other):
982 /usr/lib/ssh/sshd
985 /usr/lib/ssh/sshd
987 -sh
1004 bash
1093 ksh
1094 bash
1096 ./sapinst
1097 /sap/tmp/sapinst_exe.1096.1210759752/sapinstexe
sapdb/data/wrk includes a number of files, amongst other MaxDBServer_install-13.05.2008-08.26.log which end by:
MSG: net install registry size = 214322 bytes
MSG: wrote install registry (277768 bytes)
STDOUT: installation of MaxDB Server finished successfully Tu, May 13, 2008 at
08:26:14
MSG: packagedata of package Base not changed
MSG: packagedata of package SQLDBC not changed
MSG: packagedata of package SQLDBC 76 not changed
MSG: packagedata of package Fastload API not changed
MSG: packagedata of package PCR 7300 not changed
MSG: packagedata of package PCR 7301 not changed
MSG: packagedata of package PCR 7403 not changed
MSG: packagedata of package PCR 7500 not changed
MSG: packagedata of package SAP Utilities not changed
MSG: packagedata of package DB Analyzer not changed
MSG: packagedata of package JDBC not changed
MSG: packagedata of package Server Utilities not changed
MSG: packagedata of package Database Kernel changed
MSG: packagedata of package Redist Python not changed
MSG: packagedata of package Loader not changed
MSG: packagedata of package Messages not changed
MSG: packagedata of package ODBC not changed
MSG: writing 19 packages
MSG: net install registry size = 214695 bytes
MSG: wrote install registry (278425 bytes)
MSG: install registry successfully unlocked
/sapdb/data/wrk/<SID> have both knldiag and knldiag.err
knldiag ends like this:
2008-05-13 08:44:30 13 11561 COMMUNIC Connecting T109 local 325
2008-05-13 08:44:30 30 12929 TASKING Task T109 started
2008-05-13 08:44:30 30 11007 COMMUNIC wait for connection T109
2008-05-13 08:44:30 30 11561 COMMUNIC Connected T109 local 325
2008-05-13 08:44:30 30 11560 COMMUNIC Releasing T109
2008-05-13 08:44:30 30 12827 COMMUNIC wait for connection T109
2008-05-13 13:35:22 8 12852 DBSTATE Caught STOP signal
2008-05-13 13:35:22 8 12696 DBSTATE Change DbState to 'STOP'(28)
2008-05-13 13:35:22 8 12697 DBSTATE Resuming tracewriter
2008-05-13 13:35:22 24 12825 TASKING state 28 before shutkill(1)
2008-05-13 13:35:22 7 12696 DBSTATE Change DbState to 'TRACE_WRITER_WA
IT'(28)
2008-05-13 13:35:22 24 12825 TASKING state 28 before shutkill(1)
2008-05-13 13:35:22 24 12825 TASKING state 28 before shutkill(1)
2008-05-13 13:35:22 24 20000 Trace Start flush kernel trace
2008-05-13 13:35:27 29 12825 TASKING state 28 before shutkill(1)
2008-05-13 13:35:27 29 12768 UKT6 stopped
2008-05-13 13:35:27 24 20001 Trace Stop flush kernel trace
2008-05-13 13:35:27 24 12619 TASKING Releasing tracewriter
2008-05-13 13:35:27 1 12611 DBSTATE SERVERDB is being stopped
+++++++++++++++++++++++++++++++++++++++ Kernel Exit +++++++++++++++++++++++++++
+
2008-05-13 13:35:31 0 12845 DBSTATE Kernel exited normal
2008-05-13 13:35:31 0 12696 DBSTATE Change DbState to 'OFFLINE '(28)
--------------------------------------- current write position ----------------
knldiag.err file:
Date Time TID Typ MsgID Label Message-Text
2008-05-13 08:27:48 --- Starting GMT 2008-05-13 06:27:48 7.6.00 Build 035-123-139-084
2008-05-13 13:35:31 ___ Stopping GMT 2008-05-13 11:35:31 7.6.00 Build 035-123-139-084
Similar Messages
-
NW2004s Installation help!!!! " File sapdb.inf does exist."
Dear sir,
I am installing NW2004s SR1 Develper workplace now.
My OS is 2003 Server, and I choice MAXDB.
It is clean and new OS now.
I am already in process 14 more then one days.
The last message is "File sapdb.inf does exist. Will use the commands in file sapdb.inf.
I need your great help.
Best Regards,
MercyHi,
Please check this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f37d7e6a-0b01-0010-6690-8f4403b810cf
Regards -
CS6 Installer halts when installing Adobe Help
CS6 Creative Suite Design & Web Premium Trial downloads, extracts, but the installer halts when it hits "Currently Installing Adobe Help", and the install time keeps increasing indefinitely. I have tried over and over, re-downloading, using the direct download links, running the creative suite cleaner, the Adobe Support tool, restarting my computer, etc. etc. etc. It does this same thing when I have tried to install Dreamweaver CS6 on its own, but I was able to download & install Lightroom 4 with no problems whatsoever. What can I do at this point?
I too am having this problem, and killing InstallAdobeHelp.exe DOES seem to allow the installer to continue. Thank you for that tip, Dan!
For reference (Adobe or otherwise) here is some log and other useful information:
[ 3968] Mon Jul 16 23:43:03 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 0 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{152B1DA7-A342-4EAA-BD28-25DD7B74AB3C}] took 2948.64 milliseconds (2.94864 seconds) DTR = 165.5 KBPS (0.161621 MBPS)
User specified overrideFile:
[ 3968] Mon Jul 16 23:43:05 2012 INFO
Successfully updated the csu inventory for {152B1DA7-A342-4EAA-BD28-25DD7B74AB3C} Suite Shared Configuration CS5.5 2.5.0.0 return values 0:0
Calling the custom action code for post-repair for payload {152B1DA7-A342-4EAA-BD28-25DD7B74AB3C} Suite Shared Configuration CS5.5 2.5.0.0
Calling the custom action code for pre-install for payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0
::START TIMER:: [Payload Operation :{D38116C8-C472-4BB0-AD6F-0C1DD1320D1D}]
[ 7124] Mon Jul 16 23:43:05 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: InstallThirdPartyPayloadOperation
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installing third party payload
Third party application path:C:\Users\<USERNAME_REPLACED>\Desktop\CS6 Master Collection\Adobe CS6\payloads\AdobeHelp\InstallAdobeHelp.exe
CommandLine: appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=-programMenu installerArg4=AdobeHelp.air
[ 2068] Mon Jul 16 23:53:29 2012 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
-----I CANCEL INSTALL HERE AFTER LONG PERIOD OF TIME---------
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 6.0.98.0
Win OS version: 6.1.1.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
[ 2068] Mon Jul 16 23:53:30 2012 INFO
Supported RIBS version range: [0.0.66.0,6.0.98.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 2068] Mon Jul 16 23:53:38 2012 INFO
______ Verify Dependency Subscribers ______
BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
etc....
A couple notes:
I am installing CS6 Master Collection trial.
I am running Windows 7 Ultimate x64
I had CS4 & CS5 Master Collection installed (non-trial)
I tried removing both, with no luck.
I updated Download Manager and Adobe Air just previous to installing.
I have tried restarting, installing with and without internet access/activation (shouldn't really matter) - Attempted installation about 6 times.
Running InstallAdobeHelp from command line using the same call the installer does (InstallAdobeHelp.exe CommandLine: appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=-programMenu installerArg4=AdobeHelp.air) Gives the same result - an empty window appears and never goes away.
Canceling the installer doesn't kill InstallAdobeHelp.exe, it will keep running in the background until killed - even if the installer is forcefully stopped, and will even run 4 or 5 InstallAdobeHelp.exe processes at the same time, if you keep trying to install.
Big idea: I saw something in the log about already having AdobeHelp 1.0.0.0 installed (Probably from CS4/5?) I'm guessing this is causing the conflict:
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,6.0.98.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[ 9132] Tue Jul 17 23:59:43 2012 INFO
______ Verify Dependency Subscribers ______
[ 9132] Tue Jul 17 23:59:43 2012 WARN
DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it. -
Hello, I am trying to upgrade my macbook pro to yosemite, but I get the "disk cannot be used to startup your computer" error.
Resizing the partition does not work for me and I get the error "MediaKit reports no such partition" probably because I installed linux in dual boot and the disk manager is lost.
Anyway to tell the yosemite installer that it should not pay attention whether the disk is bootable or not ?
If I am doomed, any way to delete the installer and downloaded OS from my hard drive ?
Thanks for your helpAs usual, the Linux installer wrecked the partition table. You would have to boot from your OS X installation disc and repartition. Doing so will of course remove all data from the drive, so you must back up first if you haven't already done so.
-
I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks
Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa
Moved thread to Android development.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
I purchased an external CD drive for my MacBook,the internaldrive had died. When I tried using the new drive I got the following msg "The attempt to burn a disc failed. The device is not accessable, probably because it was removed" I contacted OWC and tried to work the issue with them, we gave up and OWC sent me a replacement. I connected the replacement and am getting the same message. Any thoughts?
Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all
Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility. -
I lost my iPad mini while traveling recently. I tried using the Find My iPhone App (which showed my iMac, my iPhones, my old iPad, and my macbook) but the mini didn't show up...probably because it was turned off or the battery ran down.
I still have the original receipt from when I purchased it, showing the article number and the serial number. Is there any way to locate it with that info?No, unless you had Find My iPad enabled on it then there isn't any way to try and locate it.
Have you reported it to the police in case somebody hands it in ? You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc., and if it was a cellular model also contact your carrier. -
I bought mountain lion en app stores and start download, but stops and mentioned is incomplete. and when start installation mentioned error because download is incomplete and send me to download again but the button is in "downloaded" what can i do?
Welcome to the support forums.
Please ask this question in the Mac App Store forum where they can better assist you. -
I've stuck with Entourage way too long. Now I don't dare install the Mavericks OS because all my Entourage files will go away. And my iMac won't open Mac Mail (probably because I've never opened it in the 5 - 6 years I've owned the Mac.) Any suggestions?
If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter -
Installation ended prematurely because of an error.
Hi There,
could need a bit of insight. I am trying to update my XI 3.1 installl with SP2.3. SP2 installed ok but installing FP1, 2, or 3 fails with the error message in the subject line.
Sometimes the install does not even start. After running the exe it unpacks everything and then the Language selection pops up and after that nothing more.
Any idea how I can get that to work? I had no issues with the CR FPs.
Thanks,
Stephani've found [a resolution related to a different product|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error], where the poster reported the exact same "Installation ended prematurely because of an error" dialog and event id!
from a command line, i ran:
+d:\downloads\tempro_setup_dir\TEMPRO_3.3.3.exe /passive+
and that installed tempro "silently". to quote [the thread where i found the resolution|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error]:
{quote:title=Countdmoney wrote:}{quote}
> This will run the installation without the dialog boxes of the installer being displayed. Of course you will be accepting all the defaults, but the 64-bit version installs in the "Program Files" directory.
phew! finally i can now resume all those annoying alerts ;) -
My ipad screen has got locked. This is probably because a teenager tried to use the device in my absence. The passcode screen appears when I restart the device. But, does not respond to typing. How can I revive the device?
The device was synced to icloud some time ago. The Laptop PC I normally use with the device is not with me now and is being formatted for a different reason.iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Why Tempro 3.3.3 "Installation ended prematurely because of an error"?
hello forum,
i have a Satellite L500-1XD running windows 7 64 bit. i _had_ tempro 3.0 preinstalled from when i first bought the satellite in mar '10. for months, i ignored tempro's demands to update to tempro 3.3.3; until today. so, i downloaded it from [here|http://eu.computers.toshiba-europe.com/tempro/ToshibaW7TEMPRO.zip|http://eu.computers.toshiba-europe.com/innovation/generic/TEMPRO_W7_RELEASE/].
when i ran the TEMPRO_3.3.3.exe file, i got the "Welcome to Toshiba TEMPRO Installation Wizard" window as expected. but then when i clicked the "Next" button, all i got was a "Fatal error" dialog that said "Installation ended prematurely because of an error".
I searched this forum for a solution and i found [this thread|http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=167329|Satellite P100 fails to instal TEMPRO 2.0.3] that advised the original poster to uninstall the previous version. so, that's what *i* did. i uninstalled the working version 3.0 of Tempro that came preinstalled. but when i tried to install 3.3.3 again, i got the same "Installation ended prematurely because of an error"! now, i don't have tempro at all!
please, can anybody help with advice on what to do to get this thing successfully installed? i found a related entry in the windows 7 event viewer (see below) if that's of any use.
thanks in advance for your help.
=================================
Event Properties
General Tab
Windows Installer installed the product. Product Name: Toshiba TEMPRO. Product Version: 3.33. Product Language: 1033. Manufacturer: Toshiba Europe GmbH. Installation success or error status: 1603.
=================================
Event Properties
Details Tab
- System
- Provider
[ Name] MsiInstaller
- EventID 1033
[ Qualifiers] 0
Level 4
Task 0
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2010-10-29T23:25:17.000000000Z
EventRecordID 67671
Channel Application
Computer ********
- Security
[ UserID] S-1-5-21-3117272653-2424292012-3940679202-1001
================================================== ==========
- EventData
Toshiba TEMPRO
3.33
1033
1603
Toshiba Europe GmbH
(NULL)
7B44424237303231412D333433372D343436462D414345352D 3732363136343441393732437D303030303135663933366262 66613039636634636236336531616535393861636632316330 30303030393034
Binary data:
In Words
0000: 4242447B 31323037 34332D41 342D3733
0008: 2D463634 35454341 3632372D 34343631
0010: 32373941 30307D43 35313030 36333966
0018: 61666262 66633930 36626334 61316533
0020: 38393565 32666361 30306331 39303030
0028: 3430
In Bytes
0000: 7B 44 42 42 37 30 32 31 {DBB7021
0008: 41 2D 33 34 33 37 2D 34 A-3437-4
0010: 34 36 46 2D 41 43 45 35 46F-ACE5
0018: 2D 37 32 36 31 36 34 34 -7261644
0020: 41 39 37 32 43 7D 30 30 A972C}00
0028: 30 30 31 35 66 39 33 36 0015f936
0030: 62 62 66 61 30 39 63 66 bbfa09cf
0038: 34 63 62 36 33 65 31 61 4cb63e1a
0040: 65 35 39 38 61 63 66 32 e598acf2
0048: 31 63 30 30 30 30 30 39 1c000009
0050: 30 34 04i've found [a resolution related to a different product|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error], where the poster reported the exact same "Installation ended prematurely because of an error" dialog and event id!
from a command line, i ran:
+d:\downloads\tempro_setup_dir\TEMPRO_3.3.3.exe /passive+
and that installed tempro "silently". to quote [the thread where i found the resolution|http://forum.ventrilo.com/showpost.php?p=134644&postcount=36| Vista x64 Ultimate - Installation ended prematurely because of an error]:
{quote:title=Countdmoney wrote:}{quote}
> This will run the installation without the dialog boxes of the installer being displayed. Of course you will be accepting all the defaults, but the 64-bit version installs in the "Program Files" directory.
phew! finally i can now resume all those annoying alerts ;) -
During a deployment from wds i get the following error with windows 8.1 "windows installation cannot continue because
a required driver could not be installed".
Hardware : Gigabyte GA-Q77M-D2H.
I got image from installation Disc.
When the error occors this is the event in the admin-log on server 2008R2
The following WDS Client has encountered Fatal Error:
SessionGuid: {01208fe1-bb0c-49d6-9e32-0000da4897af}
MAC: 000C29D627F6
IP: 192.168.208.86
ClientGuid: {2f904d56-a52b-3220-a351-79ecd5d627f6}
Arch: 9
ErrorMessage: Windows installation cannot continue because a required driver could not be installed.
What to do?
Thank you in advance.Hi,
The problem is a unsuccesful installation of driver in the driverstore, the first step would be to ensure that you are using the latest driver for the hardware and operating system or you’re experiencing
compatibility issues with a driver.
Then I suggest pressing shift+f10, and type diskpart then lisk disk, view whether all disks work fine.
Regards,
Yolanda
Yolanda
TechNet Community Support
Maybe you are looking for
-
No more details other than above . I have uninstalled and re-installed FIREFOX several times and still get this issue. Also, very slow in connecting to websites.
-
Acrobat X Pro with Outlook 2010 - Bookmarks & help!
Hi, I am a novice user of Acrobat, and use it to produce the most basic documents with good results. I have only ever used Acrobat 7, and one thing that I have pushed to our managers here, is the ability to output a folder of emails direct from outl
-
Give Discount/Surcharges to PR00
Hi Experts, Please can you explain how to give discount to PR00 base value? For example, currently the pricing logic is PR00 value * quantity = gross value. Any discount or surcharges will be based on this gross value. How to change it to give discou
-
Hi, I have a table containing around 0.25 million records. It has a time stamp column and its indexed. Now I am deleting records from this table older than one year. But this is taking more than 10 minutes. Since I am doing this thorough application
-
Keyboard Issue in Leopard for Powerbook G4
Since a fresh Leopard install, I have been having the following problems: the caps lock and num lock keys do not light up anymore, and the keyboard stops responding intermittently. The only fix I have found is to restart the computer. I have read abo