Installation hangs at "Configuring devices."

Solaris 10 6/06 Installation hangs at "Configuring devices." stage.
I have tried to:
1) boot with "pci-reprog=off"
2) disabled Core Duo in BIOS
and with combinations of these.
But nothings helps.
My system:
Intel Core Duo 6400 @2.13GHz,
Western Digital WD2500-KS,
NVIDIA GeForce 6200.
Does anyone know workaround for this issue?

i have exactly the same problem.
a blank screen after configuring devices.
this is just too different from:
"solaris 10, the most advanced OS"
aris
acer aspire 5102wlmi

Similar Messages

Solaris 10 hanging at Configuring Devices during installation

Hi All,
I am trying to install Solaris 10 via cd or net, but it hangs at Configuring Devices. This is an upgrade to the current Solaris 8 OS that is running on this system.
Does anyone have any insight to this problem?
Thanks in advance,
Brian

Having the same problem here. Hangs at "Configuring devices" right after the SunOS license message. Didn't have any luck with "pci-reprog=off", so I still can't get past this point, but this could be because of my specific hardware. Did manage to figure out the GRUB kernel boot argument syntax though, from this article:
GRUB and the Solaris 10 1/06 OS: The New Bootloader for x86 Platforms
http://www.sun.com/bigadmin/features/articles/grub_boot_solaris.html
"Properties other than boot-file can be specified on the GRUB kernel command line with this syntax:"kernel /platform/i86pc/multiboot -B prop1=val1[,prop2=val2...]Notice that commas are used between arguments. When I used spaces, only the first argument was understood. Found more info on booting from GRUB here:
x86: To Install or Upgrade With the Solaris Installation Program With GRUB
http://docs.sun.com/app/docs/doc/817-0544/6mgbagb1e?a=view
x86: GRUB Menu Commands for Installation
http://docs.sun.com/app/docs/doc/817-5504/6mkv4nh5e?a=view
I tried turning off dma for my cd & drives, and also tried turning off acpi, but nothing worked. Maybe somebody else here can make progress with this info though.
- Brett

Fresh install of solaris 10 x86 hangs after 'Configuring devices'

Hi All,
I just received a new SuperMicro server with an LSI MegaRAID SAS 9261-8i controller. While trying to install Solaris 10 it hangs after "Configuring devices". I checked the LSI page and Solaris 10 is supported according to them. Any ideas how to proceed?
Fairly new to Solaris on x86 hardware.
The system has a Xeon X5690 processor in an Intel Workstation Board S5520SC motherboard. The motherboard documents claim that not disabling usb 2.0 can hang an install. I have disabled the usb 2.0 in the bios but the system still hangs. Booting it with the -kd and -kv options don't give much information.
Any help is appreciated. I might be returning these machines if I can't get this worked out.
Cheers,
Steve
Edited by: 967729 on Oct 25, 2012 3:51 PM

See if you can add the verbose option "-v" to the kernel boot options. I think you can get to the GRUB menu off the Solaris 10 install disk. That should tell you what device is causing the hang, or at least the last device that worked.
Also, can you try Solaris 11 and see if it gets past that point? A few years ago I has a similar issue with Solaris 10 on a Dell server. Solaris 11/OpenSolaris worked fine, though. IIRC I could work around the issue if I disabled the 2nd CPU - Solaris 10 had a problem bringing up the 2nd CPU on that Dell's CPU/MB config.

Live Upgrade hangs at Configuring devices. on Sun V440

Hi all,
I am trying to upgrade a V440 which is running Solaris 8 2/04 to Solaris 10 8/07.
I have patched the V440 Solaris 8 build to the latest recommended patch cluster, and have also installed p7zip utility and followed the recommended patching procedures in Sun Doc 206844.
I have installed the Live Upgrade packages from the Solaris Media Kit (8/07) and successfully created the Solaris 10 Boot Environment based on the Solaris 8 boot environment, upgraded it and activated it.
However, on rebooting, the new Solaris10 boot environment hangs at configuring devices. and fails to proceed any further in the boot process.
Can anyone assist please?

Done it!
It seems the only way I could get the V440 to upgrade to Solaris 10 was to upgrade the alternate boot environment to Solaris 9 (which required a reinstallation of the SAN foundation kit - which might be where Solaris 10 was hanging), and then a further upgrade of the alternate boot environment to Solaris 10.
I might try uninstalling the SAN foundation kit, and then an upgrade from Solaris 8 to Solaris 10 and see if this confirms my theory. Will keep you posted.

ABAP Trial Installation Hanging at Configuring Login Information

I have a Windows Server 2003 machine that I want to install the SAP NetWeaver Java and ABAP Trial versions on (yes the same machine). I've downloaded everything I need and have successfully installed the Java version without a problem.
Everything seems to be running perfectly.
Now, when I try to install the ABAP version it gets passed creating the database with: "database NSP created successfully Tu, Jul 14, 2009 at 11:28:08"
Now it's onto step "Configuring login information..." @ 52% and it's just sitting here - it's now 1:17 so it's been here for about 2 hours now with no progress movement.
I tried looking for a logfile and I can't find one anywhere so I'm not sure what exactly the installer is doing. How do I proceed to debug this to find out where the hang up is?
Thank you!

I killed the kernel.exe process hosted the NSP database to force the installation to fail.
It looks like it's having problems with changing passwords?! I am using the same exact password for the J2E instance as this NSP instance (the password is similar to: Dhgy123#). I did read that "@" symbols were a problem - perhaps "!" is as well?!
The following is part of the end of the log file:
(Jul 14, 2009 2:35:22 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Jul 14, 2009 2:35:22 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="Tue Jul 14 14:35:22 EDT 2009 An Error happened during the Change of the MaxDB Database passwords. Check end of Logfile C:/DOCUME~1/possumm/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="Tue Jul 14 14:35:22 EDT 2009 An Error happened during the Change of the MaxDB Database passwords. Check end of Logfile C:/DOCUME~1/possumm/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:247)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
FROM MaxDBSAPNWPREV.log:
Tue Jul 14 11:28:08 EDT 2009 MaxDB: rc of x_server call = 32
Tue Jul 14 11:28:08 EDT 2009 MaxDB: Changing passwords for :NSP
Tue Jul 14 11:28:08 EDT 2009 MaxDB: Try to establish connection to nsp
Tue Jul 14 11:28:09 EDT 2009 MaxDB: Setting password for user CONTROL
Tue Jul 14 11:28:10 EDT 2009 done
Tue Jul 14 11:28:10 EDT 2009 MaxDB: Setting password for user SUPERDBA
Tue Jul 14 11:28:12 EDT 2009 done
Tue Jul 14 11:28:12 EDT 2009 MaxDB: Setting password for user sapnsp
Tue Jul 14 11:28:12 EDT 2009 done
Tue Jul 14 11:28:12 EDT 2009 MaxDB: Loading Systemtables
Tue Jul 14 11:28:26 EDT 2009 done 0,OK: everything works fine
0,"C:\sapdb\NSP\db\bin\sdbsysload" -R "C:\sapdb\NSP\db" -d NSP -u superdba,*"
Installing tables for instances
Removing obsolete objects
Installing Loader tables
Installing messages and help
Installing SYSDBA tables
Installing comments for SYSDBA tables
Installing ODBC tables
Installing tables for WebAgent
Installing tables for Repository (WebDAV)
Installing DOMAIN tables
Installing comments for DOMAIN tables
Installing Views as replacement for SHOWs
Installing Database Manager tables
Installing SYSINFO tables
Installing comments for SYSINFO tables
Installing support for UDE (User Defined Extensions)
Installing tables for JDBC Database Metadata
Installing tables for SQLDBC Database Metadata
Installing additional triggers
Installing tables for DBAnalyzer
==================================
Installation successfully finished
==================================
Tue Jul 14 14:35:22 EDT 2009 MaxDB: connection broken: com.sap.dbtech.rte.comm.RTEException: Data receive failed.
Tue Jul 14 14:35:22 EDT 2009 MaxDB: rc of changing passwords = 1
Tue Jul 14 14:35:23 EDT 2009 MaxDB: Start of CallSdbuninst
Tue Jul 14 14:35:23 EDT 2009 MaxDB: IndepProgPath: C:/sapdb/programs
Tue Jul 14 14:35:23 EDT 2009 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
Tue Jul 14 14:35:23 EDT 2009 MaxDB: Calling check for db_enum in case of an abort
Tue Jul 14 14:35:23 EDT 2009 MaxDB: Instroot for nsp is: c:\sapdb\nsp\db
Tue Jul 14 14:35:23 EDT 2009 MaxDB: Further MaxDB software is installed
Edited by: Michael Possumato on Jul 14, 2009 8:46 PM
Edited by: Michael Possumato on Jul 14, 2009 8:46 PM

7.01 ABAP Server Installation hanging at 'Configure login information..'

Hello,
I have installed the 7.01 Java engine first and then started with the ABAP engine. The ABAP installation process keeps hanging with the following data:
Configuring login information....
database NSP created successfully Fr, Dec 11, 2008 at 19:16:56
64%
Did anybody encounter a similiar problem?
Thanks and regards,
ulli

Hello Ulli,
could you solve this problem? Unfortunately, I encountered the same
Kind regards,
Lars

IPhone SDK 7 installation hangs on "configuring installation"

I'm running an iMac 20" Intel, 10.5.3, and a previous iPhone SDK. I've the installer all night, but to no avail.

I've got the same problem! Have you solved it yet?

10.5.3 hangs on "configuring installation" - any ideas please?

Have a MacBook Pro Core 2 Duo.
Downloaded the 10.5.3 upgrade to Leopard, restarted, (3 times now) and watch the installer hang at "configuring installation".
Any ideas please?

We had the same problem with updating one of our G5s. However, after selecting the install and quit button the computer froze up. Now, we can't get the computer to boot up AT ALL. It hangs at the grey screen with the apple and rotating gear. But nothing after that. I have been successful only once to get it to boot up in safe mode, but can't since then.
These are the things I have tried:
Replaced the internal battery
Tried to start up holding down shift key (safe mode)
Booted up on the eDrive that Tech Tools created and ran all the diagnostics (nothing)
Ran Disk Utility: When verifying permissions it came up with a few errors, but didn't fix any of them. Said that the disk (harddrive) couldn't be "unmounted" therefor couldn't fix anything.
G5, OSX Leopard 10.5.1

Solaris 10 installation hangs

Hello everybody! I have a HP Pavilion 6609 , 192 MB RAM with Windows 98SE installed in it i make room using Qparted for Solaris in disk of 40 Gb, I tried to installa SOlaris there but after i give the type the installation it hangs on : configuring devices ...I tried with the different options to install although i know the graphic is not right cause my lack of RAM memory, also i tried with the b -kv (debug installations) but i cann't isolate the problem tot ry to fix, first the screens go too fast and second it hangs on : pseudo - device: lof io
lof io is /pseudo/lof i@o
so i don't really know what is the problem..is someone has a clue of what is going on or how to work around to install Solaris i would much appreciate. Thanks in advance for all the help. Any ideas how to sort out my problem is welcome.
Javier030664

Hi javier!
I have similar problems and found this solution:
When booting press ESC at prompt, then choose 'device tasks' and disable some devices, e.g. USB controller or network adapter. Then go back to main menu and continue install.
Imants

AS10g installation hangs on SLES9

We are trying to install AS10g (9.0.4.0.0) infrastructure.
The problem is the installer hangs on:
Configuration Assistants -> Directory Integration Platform Configuration Assistant
Nothing happens, and the machine is COMPLETELY idle.
As we can see below, 5 **INACTIVE** connections has been made by user ODS:
SID SERIAL# USERNAME STATUS PROGRAM SERVER CONECTED_SINCE
1 1 ACTIVE oracle (PMON) DEDICATED 13/12/2004 13:32
2 1 ACTIVE oracle (DBW0) DEDICATED 13/12/2004 13:32
3 1 ACTIVE oracle (LGWR) DEDICATED 13/12/2004 13:32
4 1 ACTIVE oracle (CKPT) DEDICATED 13/12/2004 13:32
5 1 ACTIVE oracle (SMON) DEDICATED 13/12/2004 13:32
6 1 ACTIVE oracle (RECO) DEDICATED 13/12/2004 13:32
7 1 ACTIVE oracle (CJQ0) DEDICATED 13/12/2004 13:32
8 1 ACTIVE oracle (QMN0) DEDICATED 13/12/2004 13:32
10 217 ODS INACTIVE ? @mymachine DEDICATED 13/12/2004 13:37
21 5 ODS INACTIVE ? @mymachine DEDICATED 13/12/2004 13:37
23 9 ODS INACTIVE ? @mymachine DEDICATED 13/12/2004 13:37
27 12 ODS INACTIVE ? @mymachine DEDICATED 13/12/2004 13:37
28 20 ODS INACTIVE ? @mymachine DEDICATED 13/12/2004 13:37
On a fresh SLES9 installation, we followed instructions from:
http://ftp.novell.com/partners/oracle/docs/iAS10g_sles9_install.pdf
Also tried:
http://download-west.oracle.com/docs/cd/B12428_13/relnotes.904/relnotesln/toc.htm
PS: On the same machine, AS10g MIDTIER (J2EE) has been installed successfully.
Does someone has installed successfully AS10g (9.0.4.0.0) infrastructure on SLES9???

Any luck/progress since you posted this ?
Which HW platform are you on anyway ?
Thanks
Pete

10.5.4 won't install-hangs on Configuring Installation

10.5.4 won't install-hangs on Configuring Installation and I have to force quit the installer. I've tried to wait it out for over an hour, but the progress bar never moves. This is with the Combo Updater. I've also tried using Software Update, but the progress bar for checking for new software stops about 3/4 of the way, and hangs forever. Any advice? Thanks.

Welcome to Apple Discussions.
Unfortunately such problems do occur for some people, not necessarily through any fault on the part of the user. Interruption of an update can cause problems for which there are solutions.
Which update was it?
Go to the Apple icon and select Software Update and see what it recommends if anything. Don't actually instal, rather just quit SU and let us know what the result is.
Secondly, open Disk Utility from the Utilities folder in the Applications folder. Select your hard drive in the LH column then Repair permissions from the lower part on the RH side of the window. It will take about 10mins to complete its task. If there is a list of permissions finishing with a message permissions repaired rerun this to make sure there are no more. See whether the odd behaviour continues.
If it does, insert the original installation dvd and restart holding the C key until the Select your language window appears. Do this & on the next window Select Disk Utility from the Tools menu. Again select your hard drive but this time choose Repair Disk. If there are repairs indicated and they are completed rerun this too to check that no more are needed. When this is finished rerun Repair permissions as well if there were any repairs carried out. Restart the computer normally and see how it all goes.
Neville

Installation hang during internet configuration Assitant

I install Oracle infrastructure on a windows 2003 server. But during internet configuration Assistant, setup can not go on. Click the stop button will not stop the processs. I select identity Management and OracleAS Metadata Repository.
Has anyone met this problem? I tried to repeat the installation, but eveytime the installation hang at this point.

Hi,
3 things you will need to do;
1- Read the install. manual well
2- check if you have a full qualified host name ex. server. your domain.com
3- Check for firewall
Hear from you,
Cheers,
Hamdy

Configurator 1.4 hangs at Connect Devices in Prepare screen

The devices show up in the "Supervise screen" as connected. And they show up in Itunes. But when I go to the "Prepare screen" and hit the prepare button they just hang at "Connect Devices". Have tried through the cart (Bretford) and plugging in individually.
I have wiped all of them and started again. Same results.
Running 11.1 Itunes. 10.8.5 OSX. Configurator 1.4

I had a reply to my topic from NYLink with the advice to check the Supervise pane and unsupervise the devices so that you can prepare them again.
What happened in my case was half of my iPads needed a full restore to get iOS7.02 installed - Configurator still had them listed as being supervised, but would not apply any apps to them, and they would not show up in the Prepare pane. So they needed to be unsupervised first before anything else could be done to them.
What I did: I plugged in a single iPad at a time, so that there was no confusion as to which device was which in Configurator - for me, Configurator had decided that all my devices were iPad02. Once the iPad was connected, I was able to go to the Devices menu at the top, and select Unsupervise from the bottom of the menu. After going through one by one, all my devices are now visible from the Prepare pane again, and once prepare was completed they were visible in the Supervise pane again.
Good luck!

CRM 2015 installation hangs without errors on Windows Server 2012 installed in a VM

I have installed a Windows Server 2012 and SQL Server 2012 on a VM using VMware Player and then installed Dynamics CRM 2013, working out all the configuration problems.
The installation hanged once without errors and when I tried it again it was installed, no problems. Dynamics CRM 2013 works without issue.
Then I copied the machine, uninstalled the Dynamics CRM 2013 and started installing CRM 2015. However this time without errors the installation hangs even though I tried more than 5 times.
There are no errors, installation program is not unresponsive and task manager shows nothing out of the ordinary.
I have also tried this on multiple physical and virtual PCs to no avail.

Try to Delete the registry files of CRM before you start the installation : HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM

Oracle VM 3 Manager installation hangs Step 8 of 9 on Weblogic error

Hi all,
I am installing Oracle VM 3.0.3 Manager component for Oracle VM on RHEL 5.5 64 bit Linux OS platform.
1) The installation hangs on the following step
Step 6 of 9 : Oracle VM ...
Retrieving Oracle VM Manager Application ...
Extracting Oracle VM Manager Application ...
Installing Oracle VM Manager Core ...
Step 7 of 9 : Domain creation ...
Creating Oracle WebLogic Server domain ...
Starting Oracle WebLogic Server 11g ...
Configuring data source 'OVMDS' ...
Creating Oracle VM Manager user 'admin' ...
Step 8 of 9 : Deploy ...
Deploying Oracle VM Manager Core container ...
2) Reviewing the OVM 3.0.3 Manager installation logs shows the following errors:
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
Starting an edit session ...
Started edit session, please be sure to save and activate your
changes once you are done.
Saving all your changes ...
Saved all your changes successfully.
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
BUILD FAILED
weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application ovm_core on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.Exception: [DeploymentService:290051]The commit message for the deployment '1,331,919,570,897' could not be completed because the deployment timed out.
at weblogic.deploy.service.internal.adminserver.AdminRequestStatus.signalCommitFailed(AdminRequestStatus.java:1007)
at weblogic.deploy.service.internal.statemachines.adminserver.AwaitingCommitResponses.requestTimedOut(AwaitingCommitResponses.java:42)
at weblogic.deploy.service.internal.adminserver.AdminRequestImpl.requestTimedout(AdminRequestImpl.java:354)
at weblogic.deploy.service.internal.RequestImpl$TimeoutMonitor.timerExpired(RequestImpl.java:242)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
3) Previous weblogic errors that caused the OVM 3.0.3 Manager installation to hang and fail:
Your environment has been set.
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
user: weblogic
timeout: 300
Connecting to t3://localhost:7001 with userid weblogic ...
This Exception occurred at Fri Mar 16 10:33:13 PDT 2012.
Connecting to t3://localhost:7001 with userid weblogic ...
This Exception occurred at Fri Mar 16 10:34:27 PDT 2012.
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
For more help, use help(domainRuntime)
Current status is RUNNING
Disconnected from weblogic server: AdminServer
03-16 10:34 system.process DEBUG system.process.run stderr:
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:313)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any ideas how to resolve these issues so that I can successfully install OVM 3.0.3 Manager?

Issue resolved had to disable Linux firewall

Installation hangs at "Configuring devices."

Similar Messages

Maybe you are looking for