Installation hangs / Cable Drivers

Hi ,
i just cannot install the PC-Suite 6.83. Every time i start the installer it hangs at 65% / 21% when it says its installing the "Nokia Connectivity Cable Driver".
I already tried to install the Cable Driver - but that installation hangs too. There is a file called "setupext.exe" which seems to cause the problem.
Does anyone can help me ?
regards

No dice here also.
Installation hangs at either 7, 79 or so % of "Nokia connectivity cable driver".
Can't pass over it. An installation starts in the background, but never finishes, I left it like 2 hours there. I also tried killing it (complains a part of the setup never ended gracefully and aborts).
Installing NCCD by itself doesn't help. Nothing else I could think of worked. I'm puzzled.
Another thing is, it works at work (XP), but hangs here (2k SP4) - on a side note, the work version says no updates are available. This version just hangs checking for updates until I stop it. Odd thing is, I'm optical fibered in both locations, I'm 17 ms away from Nokia.com and over a 3 MB dedicated connection. I have a 10 MB dedicated OF link at work.
How can it not work? The Setup hogs the CPU for like 5 secs, then cools down and just sits there.
Can't I just pass a /nocable to it or something? Just pass the NCCD, I can do that myself. Or afterwards. Or something.
I have no Roxio or any other similar products, like an AV program. Clues?

Similar Messages

Ovi Suite Installer Hangs on Windows XP SP3

Hi,
I'm getting really frustrated trying to Install the Ovi Suite Installer 2.2.0.241 on my Thinkpad T400. I still have about 8G free, but the installer hangs at about 50%. I have tried to install numerous times, with and without restarting the machine., but get the same unsuccessful results. For now I have to do with the Nokia PC Suite which was successfully installed, but I really look forward to using the OVI.
I just purchased a Nokia N97 mini after having spent 5 years on Windows Mobile due to hardward and software issues. I hope I did not make another mistake by moving back to Symbian! Even when I cancel the installation, it still hangs. Help please.
Thanks.
Attachments:
Ovi Intall hang.JPG ‏22 KB

HI WM2Symbian
I am not sure whether this will solve your problem but if have not followed this can try it once.
1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove
2. Delete the files from here:
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
C:\Documents and Settings\user\Local Settings\Application Data\Nokia
C:\Documents and Settings\All Users\Application Data\OviInstallerCache
3. Restart your PC
4. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Vista installation of P1505n drivers

Hello, i am having problem with installation of drivers , on to Vista Business. The installation,starts but when the printer is connected to the machine, nothing happens (the Vista recognises the printer as "unknown device" ), and installation hangs.... I tried all possible ways of installation,whit all drivers.Printer is 100% working, because i tested it, on other Vista machines, it just wont recognise on this particular one.

bump for eventual awesome replies

Nokia 6210 Nav, PC Connectivity Cable Drivers

When trying to connect my 6210 to my PC it takes about an hour or more and it says it is installing the PC Connectivity Drive. After all this it seems to only stay connected for a short time and then drops out. Can anyone offer help? Thanks

if you're on vista then it's common for this OS to take very long time to install drivers. but that should happen the first time you connect the phone only, after installation the phone should connect without problems after that.
anyway,1- try to remove your version of nokia pc suite
2- run a registery cleaner if you have one
3- download the latest version of nokia pc suite
4- install the app, wait for it complete and ask for a reboot.
5- reboot the pc, connect the device.
if you experiance any problems with driver installation again, stop automatic search of drivers , and direct the search to (c:\program files\nokia\connectivity cable drivers) that should speed the installation.
i hope that will help
Fear not those who argue but those who dodge

Installation hangs - OSX upgrade on MacBook Air

I am attempting to upgrade OSX on my MacBook Air. The installation hangs at "Time remaining: Less than a minute" and eventually cycles off. The error log indicates "missing CoreServices." This has been going on for > 24 hours. Any advice?

Tried to upgrade a Macbook Air with 10.6.8 Snow Leopard to Mavericks from the Apple store. Nothing seemed to happen when clicking on the dowload button and the request APPEARED to hang. The download button changed to a light grey for a few seconds, then came back as a clickable download button. There was no progress bar in the downloads section. This problem is known to Apple but was not solved as of November 1, 2014.
In fact, the upgrade download button did trigger the download. The only indication one gets is in the dock, where the OS X icon will show only "Download... ". There is a minuscule progress bar under the icon and it will take 30 minutes or so before progress starts to show in blue!
If you use an internet wire connection with a router (without other computers connected), rapidly blinking lights on the router will confirm high traffic to the MacBook Air.
The complete download took over 3 hours, via the USB/ethernet port. I also made sure the computer had power supplied by the wall charger. For some reason, the download caused the light on the magnetic plug of the charger cable not to show red or green, and the battery remaining time was not operational on the computer screen.
Installation took more than double the time shown as remaining. You just have to be patient.
After rebooting, the fan was constantly on and the battery remaining time was still not functional on the header bar. It took about an hour for Spotlight to re-index the computer.
All upgrade activities completed, after restarting the computer, the fan was running loudly and the battery remaining time was not working.
I tried the following as recommended for a similar problem reported after installation of Mountain Lion. By pressing Control-Shift-Option and the power button all at once for a second, the computer switched off. Pressing the power button to restart the computer showed everything was back to normal: no fan noise, and the battery remaining time percentage works again. Plugging in the charger also brought again the red charging light.

ISE Webpack, Cable Drivers not installing for Debian Wheezy

Trying to install ISE Webpack with cable drivers yield the following error during installation:
Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
Since drivers are not installed, attempting to launch iMPACT later on gives:
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
WARNING:iMPACT:923 - Can not find cable, check cable setup !
The entire install.log can be found here:
--Install log = /tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log
--Installing cable drivers.
--Driver versions in this package: windrvr=1301, xpc4drvr=1041
--Script name = /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers
--HostName = invidia
--Current working dir = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
--Script location = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
--Script argument=/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE.
Digilent Cable Drivers Installer
Checking for prerequisite: libusb-1.0
libusb-1.0.so.0 is present
Installing component: Digilent Adept Runtime
Adept Runtime Installer
64-bit operating system detected
Installing runtime libraries.....
Checking to see if libdabs.so is already installed....
Existing installation of libdabs.so found. Checking to see if this version should be installed.
Version 2.11.1 is currently installed. Version libdabs.so.2.11.1 will not be installed.
Checking to see if libdaci.so is already installed....
Existing installation of libdaci.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdaci.so.2.7.2 will not be installed.
Checking to see if libdaio.so is already installed....
Existing installation of libdaio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdaio.so.2.7.2 will not be installed.
Checking to see if libdemc.so is already installed....
Existing installation of libdemc.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdemc.so.2.7.2 will not be installed.
Checking to see if libdepp.so is already installed....
Existing installation of libdepp.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdepp.so.2.7.2 will not be installed.
Checking to see if libdftd2xx.so is already installed....
Existing installation of libdftd2xx.so found. Checking to see if this version should be installed.
Version 1.0.1 is currently installed. Version libdftd2xx.so.1.0.1 will not be installed.
Checking to see if libdgio.so is already installed....
Existing installation of libdgio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdgio.so.2.7.2 will not be installed.
Checking to see if libdjtg.so is already installed....
Existing installation of libdjtg.so found. Checking to see if this version should be installed.
Version 2.10.1 is currently installed. Version libdjtg.so.2.10.1 will not be installed.
Checking to see if libdmgr.so is already installed....
Existing installation of libdmgr.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdmgr.so.2.7.2 will not be installed.
Checking to see if libdmgt.so is already installed....
Existing installation of libdmgt.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdmgt.so.2.7.2 will not be installed.
Checking to see if libdpcomm.so is already installed....
Existing installation of libdpcomm.so found. Checking to see if this version should be installed.
Version 2.10.1 is currently installed. Version libdpcomm.so.2.10.1 will not be installed.
Checking to see if libdpcutil.so is already installed....
Existing installation of libdpcutil.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdpcutil.so.2.7.2 will not be installed.
Checking to see if libdpio.so is already installed....
Existing installation of libdpio.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdpio.so.2.7.2 will not be installed.
Checking to see if libdpti.so is already installed....
Existing installation of libdpti.so found. Checking to see if this version should be installed.
Version 2.8.2 is currently installed. Version libdpti.so.2.8.2 will not be installed.
Checking to see if libdspi.so is already installed....
Existing installation of libdspi.so found. Checking to see if this version should be installed.
Version 2.8.2 is currently installed. Version libdspi.so.2.8.2 will not be installed.
Checking to see if libdstm.so is already installed....
Existing installation of libdstm.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdstm.so.2.7.2 will not be installed.
Checking to see if libdtwi.so is already installed....
Existing installation of libdtwi.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libdtwi.so.2.7.2 will not be installed.
Checking to see if libjtsc.so is already installed....
Existing installation of libjtsc.so found. Checking to see if this version should be installed.
Version 2.7.2 is currently installed. Version libjtsc.so.2.7.2 will not be installed.
Successfully installed runtime libraries.
Installing system binaries.....
installed "/usr/local/sbin/dftdrvdtch"
Successfully installed system binaries in "/usr/local/sbin".
Installing firmware images.....
Successfully installed firmware images in "/usr/local/share/digilent/data/firmware".
Installing JTSC device list.....
Successfully installed JTSC device list "/usr/local/share/digilent/data/jtscdvclist.txt".
Installing CoolRunner support files.....
Successfully installed CoolRunner support files in "/usr/local/share/digilent/data/xpla3".
Installing CoolRunner 2 support files.....
Successfully installed CoolRunner 2 support files in "/usr/local/share/digilent/data/xbr".
Installing Adept Runtime configuration.....
Successfully installed Adept Runtime configuration "/etc/digilent-adept.conf".
Installing USB UDEV rules.....
Successfully installed USB UDEV rules "/etc/udev/rules.d/52-digilent-usb.rules".
Successfully reloaded UDEV rules.
Successfully updated dynamic loader cache.
Successfully installed Adept Runtime.
Successfully installed component: Digilent Adept Runtime
Installing component: FTDI Drivers (libftd2xx)
FTDI Driver Installer
64-bit operating system detected
Checking to see if libftd2xx.so is already installed....
Existing installation of libftd2xx.so found. Checking to see if this version should be installed.
Version 1.0.4 is currently installed. Version libftd2xx.so.1.0.4 will not be installed.
Successfully updated dynamic loader cache
Successfully installed FTDI Driver
Successfully installed component: FTDI Drivers (libftd2xx)
Installing component: libCseDigilent
Installer for Plugins for Xilinx Tools
Plugins will be installed in the following directory: "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
Found plugin "libCseDigilent" version "14.1" by "Digilent".
Successfully installed plugin in "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/lib/lin64/plugins/Digilent/libCseDigilent".
Successfully installed 1 plugin(s) for Xilinx Tools.
Successfully installed component: libCseDigilent
Successfully installed Digilent Cable Drivers
--Kernel version = 3.2.0-4-amd64.
--Arch = x86_64.
--Installer version = 1100
--Unsetting ARCH environment variable.
--File /lib/modules/misc/install_windrvr6 does not exist.
--Installing USB drivers------------------------------------------
--File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex version = 1030
--File xusbdfwu.hex exists.
--File xusbdfwu.hex version = 1030
--File xusbdfwu.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex version = 1028
--File xusb_xlp.hex exists.
--File xusb_xlp.hex version = 1028
--File xusb_xlp.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex version = 1028
--File xusb_emb.hex exists.
--File xusb_emb.hex version = 1028
--File xusb_emb.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex version = 2004
--File xusb_xpr.hex exists.
--File xusb_xpr.hex version = 2004
--File xusb_xpr.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex version = 1030
--File xusb_xup.hex exists.
--File xusb_xup.hex version = 1030
--File xusb_xup.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex version = 2300
--File xusb_xp2.hex exists.
--File xusb_xp2.hex version = 2300
--File xusb_xp2.hex is already updated.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex exists.
--File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex version = 2006
--File xusb_xse.hex exists.
--File xusb_xse.hex version = 2006
--File xusb_xse.hex is already updated.
--Product ID 0007 is already in the usermap.
--Product ID 0009 is already in the usermap.
--Product ID 000d is already in the usermap.
--Product ID 000f is already in the usermap.
--Product ID 0013 is already in the usermap.
--Product ID 0015 is already in the usermap.
--Product ID 0008 is already in the usermap.
--Installing windrvr6---------------------------------------------
--Checking version.
--File /lib/modules/3.2.0-4-amd64/kernel/drivers/misc/windrvr6.ko does not exist.
--File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko does not exist.
--Setting source version to 1301.
--File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko is newer than the destination file.
USE_KBUILD = no
checking for cpu architecture... x86_64
checking for WinDriver root directory... /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64
checking for linux kernel source... found at /lib/modules/3.2.0-4-amd64/build
checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so
checking which directories to include... -I/lib/modules/3.2.0-4-amd64/source/include
checking linux kernel version... not found
make -f makefile.wd clean
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make -f makefile.wd
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make -f makefile.wd
make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
--make windrvr install rc= 2
--install_windrvr6 rc = 2
--Module windrvr6 is not running.
--Module xpc4drvr is not running.
--Note: By default, the file permission of /dev/windrvr6 is enabled for the root user only
and must be changed to allow access to other users.
--real rc=2
--Driver installation failed.
--Digilent Return code = 0
--Xilinx Return code = 1
--Return code = 1
INFO ::Mon Dec 02 10:59:01 TZ 2013:: Console message preference has been changed to INFO
INFO ::Mon Dec 02 10:59:01 TZ 2013:: Xilinx Installer/Updater launched.
INFO ::Mon Dec 02 10:59:05 TZ 2013:: Proxy choice: IE
INFO ::Mon Dec 02 10:59:05 TZ 2013:: install version: 14.7
INFO ::Mon Dec 02 10:59:05 TZ 2013:: dat file URL: www.xilinx.com/direct/swhelp/14_wiclient.dat
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: /tmp/xilinx_ise_webpack/14.7/ISE_DS
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Acquire or Manage a License Key
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Edition : ISE WebPACK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE DS Common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: ISE DS Common
INFO ::Mon Dec 02 11:03:14 TZ 2013:: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: EDK
INFO ::Mon Dec 02 11:03:14 TZ 2013:: PlanAhead Analysis Tool
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: PlanAhead
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: PlanAhead Files
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: setupEnv.sh
INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: ISE
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: Design Environment Tools
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: WebPACK Devices
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Linux System Generator Info XML
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Ensure Linux System Generator Symlinks
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Enable WebTalk to send software, IP and device usage statistics to Xilinx (Always enabled for WebPACK license)
INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Cable Drivers
INFO ::Mon Dec 02 11:08:59 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:08:59 TZ 2013:: Migrating registry and creating file association
WARN ::Mon Dec 02 11:08:59 TZ 2013:: Unable to copy "/home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1/common/idata/.pref.bin" to "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/.xinstall/idata/.pref.bin" source does not exist.
INFO ::Mon Dec 02 11:09:00 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:11:41 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:11:41 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:11:42 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:13:23 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:13:23 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:13:24 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:19:00 TZ 2013:: fileset.txt written.
INFO ::Mon Dec 02 11:19:00 TZ 2013:: Migrating registry and creating file association
INFO ::Mon Dec 02 11:19:01 TZ 2013:: Post-GUI updates completed.
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: setupEnv.sh
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: Install Linux System Generator Info XML
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen/util/ensure_symlinks.sh /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen lin64
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/PlanAhead/data/webtalk/webtalk_install.sh on
INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /bin/sh -c "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers >>/tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
INFO ::Mon Dec 02 11:19:14 TZ 2013:: Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
INFO ::Mon Dec 02 11:19:36 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/xlcm
INFO ::Mon Dec 02 11:20:14 TZ 2013:: Xilinx Installer/Updater exited with return status "0".
INFO ::Mon Dec 02 11:20:14 TZ 2013:: ################################################################
What are the steps required to fix the drivers on Debian Wheezy?
Thanks in advance
Andreas Frisch

I'm a bit surprised that the only supported Linux distros are commercial (costing money) distros!
What's the point in providing Linux support for your tools then. The overwhelming majority of Linux users use free distros like Mint, Ubuntu, Debian, Fedora etc.
I had exactly the same problem and now I'm forced to BUY a Linux distro in order to build PetaLinux?
Anyway, a) are there any plans to support these tools on the more popular (free) distros? and b) Does anyone know if we can use CentOS 6, since that's supposed to be a community (free) clone of the supported (but not free) RHEL 6 distro?
Anyone know of an 'unsuported' Linux distro that 'works' anyway (especially for the cable drivers)?
It LOOKS as if that one cable driver install issue is the only thing preventing us from using a boat load of other distros. Can't this be fixed?

USB Cable drivers expired certificates

Trying to create an msi for a silent unattend install of Vivado 15.2 on Win 7x64 and I'm having a problem installing the USB cable drivers in that after installing a "Progam compatibility Assistant" window appears that states "Windows requires a digitally signed driver". Having checked the certificates installed I can see that both certificates from Jungo and Xilinx expired on 2011 and 2008 respectively. How do I go about resolving this?

Hi
I suggest you to try the steps mentioned in the section "Batch Mode Installation Flow" to install Vivado 2015.2 from the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_2/ug973-vivado-release-notes-install-license.pdf
Thanks,
Vinay

Installs hang on G3 B&W

Hi fellow Mac-lovers,
This Smurf was handed down to me. It had very little memory, a 300Mhz CPU, a small hard drive, and was running 10.1. Piece by peace, I mustered a gig of memory, a 40GB HDD, a Radeon 7000 PCI I had lying around, and finally a Sonnet 500MHZ G4 upgrade, and installed Xubuntu Hardy in it.
Everthing was going well, but I wanted to make sure that the Sonnet CPU was what the seller said it was, and I didn't know how to get that information under Xubuntu, so I erased the HDD and installed 9.2.2. Curiously enough, the CPU was listed as a G3 300Mhz.
I decided to install OS X to make sure, but installing Tiger in the HDD and putting it back didn't work; it would stop halfway during booting and hang there forever. Went back to OS 9, worked fine, still detecting the CPU as a 300Mhz.
Then I decided to install Panther. No go. At the end of the installation of CD 1, it just hangs forever. Tried several times, same luck, or lack thereof. The base OS 9 continued to work, and I checked the HDD using the Disk Utility in the install. Everything looks fine.
Frustrated, I tried Erase and Install with Panther, with the same result, the installer hanging and going nowhere. Tried reinstalling Xubuntu, but the installer also hangs now.
I'm at the end of my wit here. What's going on with this Smurf?
Any feedback will be very appreciated.
Thanks in advance.
P.S. It also has a Sonnet Harmoni PCI card that worked very well in Xubuntu, and should work with the Airport Extreme drivers in Panther, if I ever get to install it...
P.P.S. Now even the OS 9 install hangs...

If you cannot Boot to an OS 9 System/install CD, you have a Hardware Problem. Those CDs serve as an incorruptible source of known-good software, eliminating the Hard Drive and the software on it as a source of problems.
If you have multiple RAM modules, shift each module down one slot and bring the last one around to the first position. If no change, do it again until you have gone through the whole set of possibilities. If no change try removing one module at a time. Above all else, be methodical -- and only change one thing at a time.
If you CAN Boot to the OS 9 System/Install CD, stop right there -- don't Install anything.
Find the copy of Gauge Pro on the Hard Drive and double click on it.
Choose something like "Test Memory" off its Menus.
Message was edited by: Grant Bennet-Alder

BI 7.0 Java Add-on installation hangs

Hi Guru's
While doing upgrade of BW 3.5 (Netweaver 2004) to BI 7.0 (Netweaver 2004s) during Java Add-on installation at "Database Instance Java Add-in" phase the installation hang on "Import Java dump" phase.
I have tried to kill and restart the installation 2-3 times and restarting the complete installation once again it stops at the same phase. Kindly let me know what can be the reason because we have not face this issue in DEV and QA environment. It is my production server.
The environment is HP-UX IA64 with oracle 10g.
Thanks in advance.

Hi Rajesh,
What stage is the installation hanging at ?
Please provide any error info from sapinst_dev.log
Check if java engine is installed and is up and running or not.. You could check the j2ee work directory under which you find j2ee stack related traces.
e.g. check std_server0 to see if the server is up or not
Please send more details
Regards,
Snehal

CRM 2015 installation hangs without errors on Windows Server 2012 installed in a VM

I have installed a Windows Server 2012 and SQL Server 2012 on a VM using VMware Player and then installed Dynamics CRM 2013, working out all the configuration problems.
The installation hanged once without errors and when I tried it again it was installed, no problems. Dynamics CRM 2013 works without issue.
Then I copied the machine, uninstalled the Dynamics CRM 2013 and started installing CRM 2015. However this time without errors the installation hangs even though I tried more than 5 times.
There are no errors, installation program is not unresponsive and task manager shows nothing out of the ordinary.
I have also tried this on multiple physical and virtual PCs to no avail.

Try to Delete the registry files of CRM before you start the installation : HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM

Oracle VM 3 Manager installation hangs Step 8 of 9 on Weblogic error

Hi all,
I am installing Oracle VM 3.0.3 Manager component for Oracle VM on RHEL 5.5 64 bit Linux OS platform.
1) The installation hangs on the following step
Step 6 of 9 : Oracle VM ...
Retrieving Oracle VM Manager Application ...
Extracting Oracle VM Manager Application ...
Installing Oracle VM Manager Core ...
Step 7 of 9 : Domain creation ...
Creating Oracle WebLogic Server domain ...
Starting Oracle WebLogic Server 11g ...
Configuring data source 'OVMDS' ...
Creating Oracle VM Manager user 'admin' ...
Step 8 of 9 : Deploy ...
Deploying Oracle VM Manager Core container ...
2) Reviewing the OVM 3.0.3 Manager installation logs shows the following errors:
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
Starting an edit session ...
Started edit session, please be sure to save and activate your
changes once you are done.
Saving all your changes ...
Saved all your changes successfully.
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
BUILD FAILED
weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application ovm_core on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.Exception: [DeploymentService:290051]The commit message for the deployment '1,331,919,570,897' could not be completed because the deployment timed out.
at weblogic.deploy.service.internal.adminserver.AdminRequestStatus.signalCommitFailed(AdminRequestStatus.java:1007)
at weblogic.deploy.service.internal.statemachines.adminserver.AwaitingCommitResponses.requestTimedOut(AwaitingCommitResponses.java:42)
at weblogic.deploy.service.internal.adminserver.AdminRequestImpl.requestTimedout(AdminRequestImpl.java:354)
at weblogic.deploy.service.internal.RequestImpl$TimeoutMonitor.timerExpired(RequestImpl.java:242)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
3) Previous weblogic errors that caused the OVM 3.0.3 Manager installation to hang and fail:
Your environment has been set.
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
user: weblogic
timeout: 300
Connecting to t3://localhost:7001 with userid weblogic ...
This Exception occurred at Fri Mar 16 10:33:13 PDT 2012.
Connecting to t3://localhost:7001 with userid weblogic ...
This Exception occurred at Fri Mar 16 10:34:27 PDT 2012.
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
For more help, use help(domainRuntime)
Current status is RUNNING
Disconnected from weblogic server: AdminServer
03-16 10:34 system.process DEBUG system.process.run stderr:
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:313)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any ideas how to resolve these issues so that I can successfully install OVM 3.0.3 Manager?

Issue resolved had to disable Linux firewall

Windows 7 installation hangs on 'completing installation' in boot camp

hi
i am trying to install windows 7 ultimate 32 bit using boot camp and each time i have tried (except on one occasion) the installation has hanged on the 'completing installation' stage. i initially had this problem, then one time it worked, but then i had to wipe my boot camp partition and start again, and since then no joy in installing windows 7 again.
when the installation hangs it sounds like the install DVD is making a whirring sound as though there is an issue reading the DVD. but i have tried two different windows 7 install DVDs in both drives on my Mac Pro and i keep getting the same problem.
i have tried installing without any peripherals plugged in, including my cinema display, but still no joy, except for that one occasion, when i am not aware of having done anything different.
the boot camp partition is 32GB, and i have the same issue whether starting the installation using the boot camp assistant, or just booting from the Windows DVD and formatting the boot camp partition during the install.
can anyone help me troubleshoot this?
thanks
nick

On a Mac Pro with four hard disks, you would be better off devoting an entire HDD to Windows. You do not even need to start the Boot Camp Assistant application.
However, that does not appear to be the problem. Perhaps the size of your Windows partition is a bit on the smallish side. Why so small? Have you tried a larger partition? Going larger would be a good experiment to help drill down to the installation problem.
Try to eliminate anything under your control that could be part of the problem.
At 32GB that's the borderline between being permitted to use FAT32 formatting and being required to employ NTFS. Presumably, you allowed the installer to use NTFS. In fact I think Win7 requires NTFS. Switch the partition size a little down or a little up to eliminate that as a possible glitch point. Just a thought and probably a stupid one but you never know...
An afterthought: Can you get hold of a FireWire DVD optical drive. Maybe the internal drive is faulty.

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fix

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.

run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.

Installation hangs with Third Party Source component

Hi,
The installation hangs when it is installing Third Party Source (57%) in my environment.
This is my environment:
1. Solaris 10 x86 5/08
2. SunStudio12ml-solaris-x86-200709-pkg.tar
3. Installation method: single user, graphical user interface
4. Hardware: VMware Workstation 6.0.2, CPU 1.5G, memory 400M
I searched in SunStudio12ml-solaris-x86-200709-pkg.tar, and I could not find SPROrdbks package which belongs to Third Party Source component.
I suspect this is the root cause of my installation problem. I restart the installation, and I do not select to install Third Party Source component. But the installation process now hangs when it is installing Performance Library (56%). I don't what is the root cause :P
Can anyone help me?
Thank you very much!
Regards,
O2Cabin

Hi,
You could find log in the /var/sadm/install/logs directory. Probably it helps you.
(for example: /var/sadm/install/logs/Sun_Studio_Ceres_software_install.B09161643)
Unfortunately the SunStudio12 installer could have problems with virtual environments.
The Sun Studio is distributed as tar.bz2 archive (for latest Express it is wrapped into sh script).
You could just unpack it. The only difference is that there no packages are created.
Could this helps you?
Also if you use OpenSolaris you could install Sun Studio from IPS.
Thank you

B1DIEvent Service on Windows Server 2008 x64 - installation hanging

I'm trying to install the B1DIEvent Service on a Windows 2008 x64 Server but the installation is not completing. It does create the directories in the SAP folder but the installer hangs at roughly 95%.
It seems to not be able to register the service on the server.
Does anyone know if there would be compatability issues with Wondows 2008 Server x64? Or are there any speciffic steps that I can take to install this?
I have installed MSMQ on the server.
Any help would be appreaciated.
Best wishes
Edu van Zyl

Hi Edu,
Did you followed the instructions compiled in the other threads showing how to recompile the dll???
Just follow step by step what is described there, it should work.
DI EVENT SERVICE ON 64 SERVER
1. Change compilation option to x64
2. You have to replace the following 2 lines modified marked with:
char msg[ 398 ]; // Old was mgs[378]
sock, msg, 398, 0, (const struct sockaddr*)&sAddr, sizeof(struct
sockaddr_in));
3. Replace the old dll by the new one compiled
4. Don't forget to register the dll (after compiling and copying in the right folder):
C:\WINDOWS\SysWOW64>regsvr32.exe "C:\Program Files (x86)\SAP\SAP Business
One DI Event Service\SAP Business One DI Event Server\SBO_SP_TransactionNotification\B1DIEventsSender.dll"
Both Ad and Andres succeeded to do it.
Hope it helps
Trinidad.

Installation hangs / Cable Drivers

Similar Messages

Maybe you are looking for