Installation hangs on a Asus P8P67 board

Hi,
I am using ARCH_201108 image and install from a USB stick. However after booting and select to install, the installation hangs at the same place every time:
:: Mounted archiso volume successfully.
:: Mounting /cowspace (tmpfs) filesystem, size=75%...done.
please help... thanks!

Welcome zhangxiao,
I'm far from an expert - hopefully the experts will chime in soon. But as a first check, did you do a checksum on the iso before installation?
I've installed arch on a half a dozen machines or so, and I've had a couple installer hangs - in each case it was due to a faulty iso image. I felt quite foolish after staying up all night struggling only to find that a freshly downloaded iso installed perfectly.

Similar Messages

[SOLVED] Asus P8P67 Pro motherboard missing eth0

Hey everyone
I'm setting up my new box and haven't got very far, this has to be the first time Arch hasn't automatically loaded the network driver on one of my boxes.
As the title suggests, I have an Asus P8P67 Pro (Sandybridge) which has some intel gbit interface.
I had read issues relating to a realtek interface that has issues with Wake-On-Lan so I just burnt a Ubuntu Live cd and eth0 was successfully found, so it appears that arch isn't loading the nessasary driver.
Running ifconfig -a & ls /sys/class/net on the arch installer (or even after an install) only indicate that lo is present.
Can I use the ubuntu Live CD to workout which driver / module I should be using to get the Network working?
UPDATE:
Okay I've manages to get the interface up, using e1000e driver : http://sourceforge.net/projects/e1000/f … le/1.2.20/
I was kinda luckly I install base-devel, I also included the 2.6 kernel-headers package, although I'm not sure if that was needed.
Copied it to a usb key and make, make install.
tar -xvzf e1000e-1.2.2.tar.gz
cd e1000e-1.2.2
make
make install
I tried to issue modprobe e1000e but it still didn't show the interface in ifconfig -a. Maybe I should have tried to restart the network service via /etc/rc.d/network restart
Restarting the box brought up the interface.
However, this then killed all my USB ports, stuck in a PS/2 keyboard / mouse and they were fine.
Just running -Syu atm to get the latest and greatest and install sshd so I can access it easily then see if I can get both working together.
What be be the cause of loosing USB aftering install a module for the ethernet?
UPDATE 2 :
After updating the system both the NIC and the USB have failed to be detected correctly.
And trying to re-build the e1000e driver fails complaining that I don't have the kernel Development package installed, although I do have the 26 headers package installed.
As I was installing from the archlinux-2010.05-core-x86_64.iso it might have been too old of my hardware, I'm now trying with the latest netinstall testiso to see if the installer can find the NIC correctally.
UPDATE 3 :
Using the latest testiso sucessfully found my eth0 in /sys/class/net and so too is are the USB devices. Yay!
Last edited by hokapoka (2011-05-18 11:14:53)

Just for the record, testing isos can be found http://releng.archlinux.org/isos/

BI 7.0 Java Add-on installation hangs

Hi Guru's
While doing upgrade of BW 3.5 (Netweaver 2004) to BI 7.0 (Netweaver 2004s) during Java Add-on installation at "Database Instance Java Add-in" phase the installation hang on "Import Java dump" phase.
I have tried to kill and restart the installation 2-3 times and restarting the complete installation once again it stops at the same phase. Kindly let me know what can be the reason because we have not face this issue in DEV and QA environment. It is my production server.
The environment is HP-UX IA64 with oracle 10g.
Thanks in advance.

Hi Rajesh,
What stage is the installation hanging at ?
Please provide any error info from sapinst_dev.log
Check if java engine is installed and is up and running or not.. You could check the j2ee work directory under which you find j2ee stack related traces.
e.g. check std_server0 to see if the server is up or not
Please send more details
Regards,
Snehal

CRM 2015 installation hangs without errors on Windows Server 2012 installed in a VM

I have installed a Windows Server 2012 and SQL Server 2012 on a VM using VMware Player and then installed Dynamics CRM 2013, working out all the configuration problems.
The installation hanged once without errors and when I tried it again it was installed, no problems. Dynamics CRM 2013 works without issue.
Then I copied the machine, uninstalled the Dynamics CRM 2013 and started installing CRM 2015. However this time without errors the installation hangs even though I tried more than 5 times.
There are no errors, installation program is not unresponsive and task manager shows nothing out of the ordinary.
I have also tried this on multiple physical and virtual PCs to no avail.

Try to Delete the registry files of CRM before you start the installation : HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM

Oracle VM 3 Manager installation hangs Step 8 of 9 on Weblogic error

Hi all,
I am installing Oracle VM 3.0.3 Manager component for Oracle VM on RHEL 5.5 64 bit Linux OS platform.
1) The installation hangs on the following step
Step 6 of 9 : Oracle VM ...
Retrieving Oracle VM Manager Application ...
Extracting Oracle VM Manager Application ...
Installing Oracle VM Manager Core ...
Step 7 of 9 : Domain creation ...
Creating Oracle WebLogic Server domain ...
Starting Oracle WebLogic Server 11g ...
Configuring data source 'OVMDS' ...
Creating Oracle VM Manager user 'admin' ...
Step 8 of 9 : Deploy ...
Deploying Oracle VM Manager Core container ...
2) Reviewing the OVM 3.0.3 Manager installation logs shows the following errors:
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
Starting an edit session ...
Started edit session, please be sure to save and activate your
changes once you are done.
Saving all your changes ...
Saved all your changes successfully.
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
BUILD FAILED
weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application ovm_core on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.Exception: [DeploymentService:290051]The commit message for the deployment '1,331,919,570,897' could not be completed because the deployment timed out.
at weblogic.deploy.service.internal.adminserver.AdminRequestStatus.signalCommitFailed(AdminRequestStatus.java:1007)
at weblogic.deploy.service.internal.statemachines.adminserver.AwaitingCommitResponses.requestTimedOut(AwaitingCommitResponses.java:42)
at weblogic.deploy.service.internal.adminserver.AdminRequestImpl.requestTimedout(AdminRequestImpl.java:354)
at weblogic.deploy.service.internal.RequestImpl$TimeoutMonitor.timerExpired(RequestImpl.java:242)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
3) Previous weblogic errors that caused the OVM 3.0.3 Manager installation to hang and fail:
Your environment has been set.
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
user: weblogic
timeout: 300
Connecting to t3://localhost:7001 with userid weblogic ...
This Exception occurred at Fri Mar 16 10:33:13 PDT 2012.
Connecting to t3://localhost:7001 with userid weblogic ...
This Exception occurred at Fri Mar 16 10:34:27 PDT 2012.
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
For more help, use help(domainRuntime)
Current status is RUNNING
Disconnected from weblogic server: AdminServer
03-16 10:34 system.process DEBUG system.process.run stderr:
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:313)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any ideas how to resolve these issues so that I can successfully install OVM 3.0.3 Manager?

Issue resolved had to disable Linux firewall

Windows 7 installation hangs on 'completing installation' in boot camp

hi
i am trying to install windows 7 ultimate 32 bit using boot camp and each time i have tried (except on one occasion) the installation has hanged on the 'completing installation' stage. i initially had this problem, then one time it worked, but then i had to wipe my boot camp partition and start again, and since then no joy in installing windows 7 again.
when the installation hangs it sounds like the install DVD is making a whirring sound as though there is an issue reading the DVD. but i have tried two different windows 7 install DVDs in both drives on my Mac Pro and i keep getting the same problem.
i have tried installing without any peripherals plugged in, including my cinema display, but still no joy, except for that one occasion, when i am not aware of having done anything different.
the boot camp partition is 32GB, and i have the same issue whether starting the installation using the boot camp assistant, or just booting from the Windows DVD and formatting the boot camp partition during the install.
can anyone help me troubleshoot this?
thanks
nick

On a Mac Pro with four hard disks, you would be better off devoting an entire HDD to Windows. You do not even need to start the Boot Camp Assistant application.
However, that does not appear to be the problem. Perhaps the size of your Windows partition is a bit on the smallish side. Why so small? Have you tried a larger partition? Going larger would be a good experiment to help drill down to the installation problem.
Try to eliminate anything under your control that could be part of the problem.
At 32GB that's the borderline between being permitted to use FAT32 formatting and being required to employ NTFS. Presumably, you allowed the installer to use NTFS. In fact I think Win7 requires NTFS. Switch the partition size a little down or a little up to eliminate that as a possible glitch point. Just a thought and probably a stupid one but you never know...
An afterthought: Can you get hold of a FireWire DVD optical drive. Maybe the internal drive is faulty.

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fix

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.

run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.

Installation hangs with Third Party Source component

Hi,
The installation hangs when it is installing Third Party Source (57%) in my environment.
This is my environment:
1. Solaris 10 x86 5/08
2. SunStudio12ml-solaris-x86-200709-pkg.tar
3. Installation method: single user, graphical user interface
4. Hardware: VMware Workstation 6.0.2, CPU 1.5G, memory 400M
I searched in SunStudio12ml-solaris-x86-200709-pkg.tar, and I could not find SPROrdbks package which belongs to Third Party Source component.
I suspect this is the root cause of my installation problem. I restart the installation, and I do not select to install Third Party Source component. But the installation process now hangs when it is installing Performance Library (56%). I don't what is the root cause :P
Can anyone help me?
Thank you very much!
Regards,
O2Cabin

Hi,
You could find log in the /var/sadm/install/logs directory. Probably it helps you.
(for example: /var/sadm/install/logs/Sun_Studio_Ceres_software_install.B09161643)
Unfortunately the SunStudio12 installer could have problems with virtual environments.
The Sun Studio is distributed as tar.bz2 archive (for latest Express it is wrapped into sh script).
You could just unpack it. The only difference is that there no packages are created.
Could this helps you?
Also if you use OpenSolaris you could install Sun Studio from IPS.
Thank you

B1DIEvent Service on Windows Server 2008 x64 - installation hanging

I'm trying to install the B1DIEvent Service on a Windows 2008 x64 Server but the installation is not completing. It does create the directories in the SAP folder but the installer hangs at roughly 95%.
It seems to not be able to register the service on the server.
Does anyone know if there would be compatability issues with Wondows 2008 Server x64? Or are there any speciffic steps that I can take to install this?
I have installed MSMQ on the server.
Any help would be appreaciated.
Best wishes
Edu van Zyl

Hi Edu,
Did you followed the instructions compiled in the other threads showing how to recompile the dll???
Just follow step by step what is described there, it should work.
DI EVENT SERVICE ON 64 SERVER
1. Change compilation option to x64
2. You have to replace the following 2 lines modified marked with:
char msg[ 398 ]; // Old was mgs[378]
sock, msg, 398, 0, (const struct sockaddr*)&sAddr, sizeof(struct
sockaddr_in));
3. Replace the old dll by the new one compiled
4. Don't forget to register the dll (after compiling and copying in the right folder):
C:\WINDOWS\SysWOW64>regsvr32.exe "C:\Program Files (x86)\SAP\SAP Business
One DI Event Service\SAP Business One DI Event Server\SBO_SP_TransactionNotification\B1DIEventsSender.dll"
Both Ad and Andres succeeded to do it.
Hope it helps
Trinidad.

Photoshop Elements 11 Installer hangs.

Photoshop Elements 11 Installer hangs at;
Status: Installing Elements 11 Organizer
Shortcut: ARPPRODUCTICON.exe
and will proceed no further........
Ran Adobe Support Advisor while it is hung and it just keeps running, Cancel install with task manager, run Adobe Support Advisor and nothing is found.
Trying to install on Laptop - MS Windows 7 Home Premium, 64-bit SP1, AMD Turion II Dual-Core Mobile M520, 4.0 GB Raam, ATI Mobility Radeon HD 4650 Series, 2.30 Ghz

Hi Mesmoid,
Right click on setup and run as admin. If still the same issue then perform selective startup and try installing again: http://windows.microsoft.com/en-in/windows-vista/run-selective-startup-using-system-config uration .
Regards,
Romit Sinha

Adobe Installer Hangs Up on MacBook Pro running OSx 10.7.5

I can get the Audition CS6 disk image onto my mac via Download assistant or directly. But when I try to install the Adobe Installer hangs up during "Initializing Installer" and forces me to do a hard reboot.
The same procedure works just fine on my mac running OSx 10.6.8
Any remedies?

OK. I didn't find anything useful in the Troubleshoot section. Here's the PDApp.log in it's entirety for the latest installation attempt:
Fri Dec 28 14:38:20 2012
[INFO] Setup - Build Version - 6.0.335.0
Fri Dec 28 14:38:20 2012
[INFO] Setup - Logging Level verbosity Set to 4
Fri Dec 28 14:38:20 2012
[INFO] Setup - TimeLog: Bootstrapper Start
Fri Dec 28 14:38:20 2012
[INFO] Setup - TimeLog: Start initial checks
Fri Dec 28 14:38:20 2012
[INFO] Setup - Launch Path set to /Volumes/Adobe Audition CS6/Adobe Audition CS6
Fri Dec 28 14:38:20 2012
[INFO] Setup - Found 6 packages in setup manifest
Fri Dec 28 14:38:20 2012
[INFO] PIM - Build Version - 6.0.335.0
Fri Dec 28 14:38:20 2012
[INFO] PIM - Logging Level verbosity Set to 4
Fri Dec 28 14:38:20 2012
[WARN] PIM - Detected Old content in USF trying to delete it...
Fri Dec 28 14:38:21 2012
[WARN] PIM - Successfully deleted old content...
Fri Dec 28 14:38:21 2012
[INFO] PIM - Build Version - 6.0.335.0
Fri Dec 28 14:38:21 2012
[INFO] PIM - Logging Level verbosity Set to 4
Fri Dec 28 14:38:21 2012
[INFO] PIM - CREATE PIM Instance ...
Fri Dec 28 14:38:21 2012
[INFO] PIM - trying to createOrUpdatePIMDbSchema.
Fri Dec 28 14:38:21 2012
[INFO] PIM - SUCCESS Created Tables.
Fri Dec 28 14:38:21 2012
[INFO] PIM - PIM Database is Up To Date.
Fri Dec 28 14:38:21 2012
[INFO] PIM - Updater Inventory location:/Volumes/Adobe Audition CS6/Adobe Audition CS6/Install.app/Contents/Frameworks/UpdaterInventory.framework/UpdaterInventory
Fri Dec 28 14:38:21 2012
[INFO] PIM - PackageCheck: Package id DF1EA1EE-7B19-4CC4-8950-BEB6D7F70191 not installed on the system. Size required: 49365843
Fri Dec 28 14:38:21 2012
[INFO] PIM - PackageCheck: Package id 36C746D4-D32C-422A-9B0F-F3719DAA3DF8 not installed on the system. Size required: 2889421
Fri Dec 28 14:38:21 2012
[INFO] PIM - PackageCheck: Package id 5C2E838A-E0AD-4727-B8FD-54DA0C7A6FBB not installed on the system. Size required: 15633430
Fri Dec 28 14:38:21 2012
[INFO] PIM - PackageCheck: Package id B5032FD8-3CFB-4FA1-9051-811EB16A189B not installed on the system. Size required: 4237309
Fri Dec 28 14:38:21 2012
[INFO] PIM - PackageCheck: Package id 59792158-B2AE-4670-8F68-EB7DE9535F3D not installed on the system. Size required: 13952220
Fri Dec 28 14:38:21 2012
[INFO] PIM - PackageCheck: Package id 7EF4FA31-DD11-4D7E-A9D0-7C1526746C65 not installed on the system. Size required: 16135843
Fri Dec 28 14:38:21 2012
[INFO] PIM - PackageCheck: Package id F07FC360-0D5A-46FA-97FE-D317850ECBFF not installed on the system. Size required: 22302498
Fri Dec 28 14:38:21 2012
[INFO] PIM - pim_haveEnoughDiskSpaceToInstallPackages reqSize ... 136968220
Fri Dec 28 14:38:21 2012
[INFO] PIM - freeDiskSpace ... 551884427264
Fri Dec 28 14:38:21 2012
[INFO] Setup - TimeLog: End initial checks
Fri Dec 28 14:38:21 2012
[INFO] Setup - TimeLog: Begin Installing
Fri Dec 28 14:38:21 2012
[INFO] PIM - START installPackage at file /Volumes/Adobe Audition CS6/Adobe Audition CS6/packages/core/PDApp.pimx
Fri Dec 28 14:38:21 2012
[INFO] PIM - Validating package file: '/Volumes/Adobe Audition CS6/Adobe Audition CS6/packages/core/PDApp.pimx'
Fri Dec 28 14:38:21 2012
[INFO] PIM - Validating package file: '/Volumes/Adobe Audition CS6/Adobe Audition CS6/packages/core/PDApp.pima'
Fri Dec 28 14:38:21 2012
[INFO] PIM - SUCCESS insertPackageUpdateList.
Fri Dec 28 14:38:21 2012
[INFO] PIM - SUCCESS insertAppletRegInfoList.
Fri Dec 28 14:38:26 2012
[INFO] PIM - SUCCESS installPackage at file /Volumes/Adobe Audition CS6/Adobe Audition CS6/packages/core/PDApp.pimx.
Fri Dec 28 14:38:26 2012
[INFO] PIM - START installPackage at file /Volumes/Adobe Audition CS6/Adobe Audition CS6/packages/D6/D6.pimx
An "ls -l of /Volumes/Adobe Audition CS6/Adobe Audition CS6/packages/D6 shows:
total 3704
-r--r--r--@ 1 pa23771 MITLL\Domain Users 1864625 Apr 6 2012 D6.pima
-r--r--r--@ 1 pa23771 MITLL\Domain Users 25197 Apr 6 2012 D6.pimx
-r--r--r--@ 1 pa23771 MITLL\Domain Users 1832 Apr 6 2012 D6.sig

Oracle Installer hangs at 18% on a file naeet.o

Oracle Installer hangs at 18% on a file naeet.o
installer also show.. link pending..
machine is 64 bit. with OEL4 64 bit
i have oracle 9i R2 64 bit...which i am trying to install...
i've installed all the required rpms as described in Oracle-base .
Plz help.

Step by Step Installation 9.2.0.4 on EL5.5.
1. Make sure Java libraries are up to date.. (sysad side..)
2. Do not start installation from the 9204 base installation- Oracle Universal Installer has problem
2.1 Install first the OUI "only" from the 9206 patchset (p3948480_9206_Linux-x86-64.zip)
using the Oracle_Home youve just decided. While running runinstaller from 9206, choose second option thats for OUI Installation. Once installation is done check under Oracle 9i Home you would see /product/9204/oui/oraparam.ini and /product/9204/oui/bin/runInstaller. If you dont find /product/9204/oui/bin/runInstaller. You may have to rerun the runinstaller from 9206.
2.2 In ../Disk1/install/oraparam.ini edit the Linux value under [Certified Versions]
Linux=redhat-2.1AS,redhat-2.1,redhat-3,redhat-4,redhat-5,UnitedLinux-1.0,SuSE-9,SuSE-
* value must include redhat-5 inorder to suppress the error message for OS version incompat.
2.3 After completion of OUI install, edit again ../product/9204/oui/oraparam.ini as instructed
in step 2.2
2.4 Now install the 9204 base using the OUI from 9206. Run ../product/9204/oui/bin/runInstaller BUT
this time, select the "products.jar" from 9204 base installation set.
(ex: /u01/app/oracle/Disk1/stage/products.jar)
2.5 From here u should be able to install the SOFTWARE ONLY option. DO NOT create a database yet.
3. Patch the 9204 base with the 9207 patchset (p4163445_92070_Linux-x86-64.zip)
3.1 After decompressing contents, repeat step 2.2 again to suppress OS version incompat.
3.2 Now proceed with the patch application
4. You can now create a database using the "dbca" utility.

SAP installation hangs while installation EHP4 ready on Solaris-Oracle

Hi,
I am in a process of installing EHP4 READY on Solaris , with ORacle database.
at 13 Phase CREATE DATABASE, the installation hangs up
when i check the log ora_sql_results.log it says
SP2-0310: unable to open file "ora_scr_tmp.sql"
not getting any clue i have added group sapinst to user orasid, and also gave full permission to the file
"ora_scr_tmp.sql "
still no luck,
please advise.
Regards,
Irfan..

Hello Irfan,
SP2-0310: unable to open file "ora_scr_tmp.sql"
There are 3 possibilities...
1. Users and there Group membership is incorrect.
2. ORACLE_HOME directory permissions are not set or incorrect.
3. Profile parameters are not set..
Check this as below:
1. Check the Users and Group membership as below:
Users -----------> Primary Groups
<SID>adm ------> sapsys,oper,dba,sapinst
ora<SID> -------> dba,oper,sapinst
2. Check that ORACLE_HOME has 755 permissions and ora<sid>:dba should be the user and owner. You can set it with below command:
# chmod 755 -R /oracle
# chown ora<SID>:dba -R /oracle
3. Check if you defined ORACLE_HOME and ORACLE_SID environment variable for user ora<SID>.
Regards.
Rajesh Narkhede

Oracle 9i installation hangs

Oracle 9i installation hangs at the "oracle Databas Configuration Assistant".
I'm tryin to install Oracle 9i "first Time" and I get down to the last CD, and it hangs @ 50% "oracle Databas Configuration Assistant". Any Ideas???
Mark Lewis
Nortel Networks
[email protected]

Clear out your CLASSPATH envirnment variables and the install should work.
Regards,
Suraj Amin
Homepage: http://www.geocities.com/suraj_amin/
/* May the source be with you */
* Microsoft: Where do you want to go today?
* Linux: Where do you want to go tomorrow?
* BSD: Are you guys coming, or what?
*/

Oracle 11g R1 Installation hangs at Cloning Database .

When I installing Oracle 11g R1 on RHEL 5.4, the installation hangs in Cloning Database step. I have stopped the installation and then executed the scripts mentioned during installation :
"Run below as root user
/opt1/Oracle/OracleDB/oraInventory/orainstRoot.sh
/opt1/Oracle/OracleDB/product/11.1.0/db_2/root.sh
After I run the sqlplus and tried to logon:
SJP2VM0140:work2}-/home/work2# sqlplus
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jul 21 20:17:31 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Enter user-name: scott
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Any help in this regard is greatly appreciated.
Edited by: Durga Pulipati on Jul 22, 2010 12:13 AM

# sqlplus /nolog
SQL> connect / as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1269366784 bytes
Fixed Size 2144024 bytes
Variable Size 738199784 bytes
Database Buffers 520093696 bytes
Redo Buffers 8929280 bytes
ORA-00205: error in identifying control file, check alert log for more info
The alert log :
<txt>ORA-00210: cannot open the specified control file
ORA-00202: control file: '/opt1/Oracle/OracleDB/oradata/orcl/control03.ctl'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/opt1/Oracle/OracleDB/oradata/orcl/control02.ctl'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/opt1/Oracle/OracleDB/oradata/orcl/control01.ctl'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
Could you please help me with this?

Installation hangs on a Asus P8P67 board

Similar Messages

Maybe you are looking for