Installation in solaris Problem

I have completed to install Oracle in solaris and
created database, when I use sqlplus login to new created database
The following error is displayed:
"ora-07217 : sltln : environment variable cannot be evaluated"
The following is the environment variable for oracle user
HOME=/oracle_data1/oracle/product/8.1.7
HZ=100
IFS=
LD_LIBRARY=/oracle_data1/oracle/product/8.1.7/lib:/usr/openwin/lib:/usr/db/lib
LD_LIBRARY_PATH=/oracle_data1/oracle/product/8.1.7/lib:/usr/openwin/lib:/usr/db/lib
LOGNAME=eprc817
MAILCHECK=600
OPTIND=1
ORACLE_BASE=/oracle_data1/oracle
ORACLE_HOME=/oracle_data1/oracle/product/8.1.7
ORACLE_SID=eprc
PATH=/usr/bin:/usr/ucb:/etc:/oracle_data1/oracle/product/8.1.7/bin:/usr/ccs/bin:/usr/openwin/bin:.
PS1=$
PS2=>
SHELL=/bin/sh
TERM=ansi
TZ=Hongkong
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=400
set shmsys:shminfo_shmseg=50
set shmsys:seminfo_semmni=100
set semsys:seminfo_semmsl=1024
set semsys:seminfo_semmns=1024
set semsys:seminfo_semopm=100
set semsys:seminfo_semvmx=32767

You might try setting ORACLE_SID=EPRC.

Similar Messages

Problem with ana 3.6 Installation on solaris 10

Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advance

I've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521

Solaris installation related questions/problems

I've recently purchased Sun's Solaris 8 OE media kit 2/02.
I tried installing them on two computers and experienced the following problems:
On my Pentium 3, I get the following messages when during the first steps of installation:
Determining bus types and gathering hardware configuration data...
Warning:Resource Conflict - both devices are added
NON-ACPI device: PNP0C01
Memory: 9FC00-9FFFF, FFE0000-FFF7FFF,FFF8000-FFFFFFFF,
FFC0000-FFDFFFF,FFF00000-FFFFFFFF
ACPI device: PNP0C01
Memory: 9FC00-9FFFF,E0000-EFFFF,40FFC00-FFFFFFF
Warning: Resource Conflict - both devices are added
NON-ACPI device: ISY0050
Port: 3F0-3F5,3F7,IRQ:6;DMA:2
ACPI device: ISY0050
Port: 3F0-3F1,3F2-3F3,3F4-3F5;IRQ:6;6JDMA:2
Most surprisingly, the installation worked!!!
However, if anyone understands what the above means, its implications or other important information, I'd like to hear it and its workarounds if any.
On my newly purchased Pentium 4, I had to first remove my Ethernet card to prevent system boots during installation. My problem is that I have some hardware conflicts.
I have a "15 LCD monitor from LG.
Display adapters: ASUS vn179 DDR v28.32
GeForce 4 MX 440 64 MB BV17 Internal (MV)
I think that these two are causing the problem.
As a result, I cannot install Solaris with the windowing system.
I cannot see these types when choosing hardware devices.
Please advise on this matter.
I tried choosing some other hardware from the configuration list but the installation halted.
Am I doomed with this computer not having Solaris on it?
Last is a matter of Solaris residing on a single harddisk with other OS.
I want to have Solaris, Redhat Linux 7.3 and Windows XP Professional.
In what order should I install the OSs?
Is it recommended to make partitions before any of the above installations take place?
Which OS should go into each partition if it makes a difference?
P.S.
I'm a total newbie to Solaris and plan doing some Java programming on it.
So using a GUI is absolutely essential to me.

Hi TH,
You can install UPK server with WS 2008 R2 SP1 without any issues(may it be standard or enterprise edn.). Oracle database 11.2.0.4 can be used as well.
You can refer the installation guide for version 12.1 incase you have any queries.
You would only need to open the database port(eg 1527) or so on the subject server. There are no other specific port opening requirement on the firewall (port 80 must be open as well, but mostly it is not blocked on servers).
Let us know if you have any further queries or if you have any issues.
regards,
SD

Installation error Solaris 10-u6-ga1

I must be missing something really obvious on the installation of Solaris 10 U6. I've come up against the error message upon manually partitioning, and using UFS. After the install the error is:
Solaris 10 10 software installation partially failed
Solaris 10 packages partially installed
SUNWlur
Then at reboot it loops and loops
If I install using ZFS no problem. Unfortunately I have to use UFS for this install.
I pulled down the sol-10-u6-x86-ga1 dvd and installed on an Vmware to see what I'd get. If I manually setup the drive, it fails to with the same error.
Here is my drive layout both sparc server and vmware(x86)
/ = 10 Gb
swap = 10 Gb
/etc = 10 Gb
/usr = 10 Gb
/var = 10 Gb
/export=remaining drive space.
I'm I missing something obvious?
thanks
bill

There should be more information in the install log about why the one package failed. If you search for the package name in the log you should be able find it. Then that might help determine whether the package can be installed on its own, possibly fixing your reboot issue.
-- Alan

1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk? 2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?

FYI....boot from SAN is required for physical server (T4-1) (not OVM).
1) How to Boot from SAN for T4-1 Server with Solaris 11.1 OS on the disk?
The SAN disks allocated are visible in ok prompt. below is the output.
(0) ok show—disks
a) /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0, 2/hub@2/hub@3/storage@2/disk
b) /pci@400/pci@2/pci@0/pci€a/SUNW, ezalxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk
d) /pci@400/pci@2/pci@0/pci@8/SUNW, emlxs@0, l/fp@0, 0/disk
e) /pci@400/pci@2/pci@0/pci@8/SUNW,enlxs@0/fp@0,0/disk
f) /pci@400/pci@2/pci@0/pci@4/scsi@0/disk
g) /pci@400/pci@1/pci@0/pci@4/scsi@0/disk
h) /iscsi—hba/disk
q) NO SELECTION
valid choice: a. . .h, q to quit c
/pci@400/pci@2/pci@0/pci@a/SUNW, ealxs@0/fp@0, 0/disk has been selected.
Type “Y ( Control—Y ) to insert it in the command line.
e.g. ok nvalias mydev “Y
for creating devalias mydev for /pci@400/pci@2/pci@0/pci@a/SUNW,emlxs@0/fp@0,0/disk
(0) ok set—sfs—boot
set—sfs—boot ?
We tried selecting a disk and applying sfs-boot at ok prompt.
Can you please help me providing detailed pre-requesites/steps/procedure to implement this and to start boot from SAN.
2) How to SMI Label/Format a disk while OS Installation in Solaris 11.1?
As we know that ZFS is the default filesystem in Solaris 11.
We have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.
I have seen the solution that using format -e, we change the labelling but all the data will be lost, whats the way to apply a SMI Label/Format on a rpool disks while OS Installation itself.
Please provide me the steps to SMI Label a disk while installaing Solaris 11.1 OS.

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

How to Add a Physical Interface After Installation in Solaris 10

How to Add a Physical Interface After Installation in Solaris 10
Hi Java Specialist,
I am trying to setup a network interface with the following steps on a new fresh Solaris 10 installation using the instruction titled How to Add a Physical Interface After Installation in Solaris 10 3/05 ONLY from http://docs.oracle.com/cd/E19253-01/816-4554/esxhb/index.html:
1. # ifconfig lo0 plumb up
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment prior to installing Solaris
10 on top of it.
3. # Added saturn to /etc/hostname.lo0.
4. # Added 10.56.8.101 to /etc/inet/hosts
5. # Added 10.56.0.0 255.255.240.0 to /etc/inet/netmasks
6.# reboot
However, the following errors kept recurring:
svcs –xv …. unable to qualify my own domain name,
failed with exit status 69.
Any idea on what other steps have I missed? I was hoping to only do step 3 – 6 for the change to apply permanently.
Many thanks,
Jack

Hi Java Specialist,... in a Solaris forum?
1. # ifconfig lo0 plumb upThe loopback connection (your lo0)is NOT a physical interface. There are no hardware components for it. Nor can I think of any reason why it should ever be anything other than the default 127.0.0.1
Use your favorite Internet search site (such as Google, Bing, Yahoo) to learn more about it.
2. # ifconfig lo0 10.56.8.101 netmask 255.255.240.0. This was the working Windows DHCP environment ...I have no idea how a nonexistent software construct gets a DHCP address in a MS Operating System, unless you are confusing this with the "Microsoft Loopback Adapter" which is an utterly different concept. Again, go see what Google tells you.
<br>
<br>
<br>
... completely unrelated to configuring an IP...
unable to qualify my own domain nameAgain, search the Internet or even search these forums with that string of words.
Go back through your two most recent posts and read the responses again.
They seem to both be on the same topic as this new one -- configuring an IP on something.
How to initialize new IP address on secondary interface permanently
How to change IP address permanently on Solaris 10
When you've done all that, then come back and tell us what you are actually trying to do.

Installation of Solaris 9 Intel Version in Windows XP PC

I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.

Try on HCL BigAdmins website to know if your hardware is supported

Installation of Solaris 9 intel version in windows XP

I am very much interested in installation of Solaris 9 intel version in my PC which is windows XP version.
My PC Processor : AMD Athlon
I am not able to install solaris 9 in my PC.
Sun boot version is Sun OS secondary boot version 3.0.
During installation,i am going untill selection of type of installation. After selecting the Interactive type,the system is rebooting again without installing.
Select the type of installation you want to perform
(1) Solaris Interactive
(2) Custom Jumpstart
After selecting from above,the system is rebooting again without installing.
Please help me with the installation.

Are you trying to install Solaris 9 onto a server that is already running Windows XP and to keep Windows XP too?
You'll need to create a partition on which to install Solaris, - search for Solaris Windows Dual Boot on docs.sun.com for more information.

Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Access manager installation on solaris zone

Hi
I have installed the Access manager 7.0, Sun java system app server 8.1, Sun sirectory server 5.2 through JES installer on solaris 10 zone AM55-zone. Installer summarry is below, which shows installtion complete without error, but I am not able to launch the amserver login page.
Any suggestion, what I did wrong? any thoughts?
Sid
Installation Complete
Software installation has completed successfully. You can view the installation
summary and log by using the choices below. Summary and log files are available
in /var/sadm/install/logs/.
Your next step is to perform the postinstallation configuration and
verification tasks documented in the Postinstallation Configuration and Startup
Chapter of the Sun Java(TM) Enterprise System Installation Guide. See: http:
//docs.sun.com/doc/819-2328.
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} 1
Installation Summary Report
Install Summary
Java Enterprise System : Installed
Sun Java(TM) System Message Queue 3 2005Q4 Enterprise Edition : Installed
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 : Installed
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server 5 2005Q4 : Installed
Sun Java(TM) System Access Manager 7 2005Q4 : Installed
Configuration Data
Sun Java(TM) System Application Server Enterprise Edition 8.1 2005Q4 :
Domains and Instance Configuration Directory : /var/opt/SUNWappserver
Application Server Installation Directory : /opt/SUNWappserver
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server 5 2005Q4 :
Directory Server Admin User : admin
Directory Server Manager : cn=Directory Manager
Directory Server Identifier : AM55-zone
Directory Server Port : 389
Directory Server Root Suffix : dc=ipsolutionshowcase,dc=com
<--[33%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Directory Server Administration Domain : ipsolutionshowcase.com
System User : root
System Group : root
Existing Configuration Directory : 0
Configuration Directory Host : AM55-zone.ipsolutionshowcase.com
Configuration Directory Port : 389
Configuration Directory Admin User : admin
Existing User Directory : 0
User Directory Host : AM55-zone.ipsolutionshowcase.com
User Directory Port : 389
User Directory Admin User : admin
User Directory Suffix : dc=ipsolutionshowcase,dc=com
Disable Schema Checking : 0
Add Sample Entries : 0
Populate Database : 1
Sun Java(TM) System Access Manager 7 2005Q4 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 8080
LDAP User ID : amldapuser
<--[66%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Administrator User ID : amAdmin
Web Container : AppServer
Access Manager Application Server Installation Directory :
/opt/SUNWappserver/appserver
Document Root : /var/opt/SUNWappserver/domains/domain1/docroot
Access Manager Console Host (for Existing console) : AM55-zone.
ipsolutionshowcase.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : AM55-zone.ipsolutionshowcase.com
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .ipsolutionshowcase.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : AM55-zone
Access Manager Directory Server Host : AM55-zone.ipsolutionshowcase.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : dc=ipsolutionshowcase,dc=com
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
<--[100%]--[ENTER To Continue]--[n To Finish]--> {"!" exits}
Enter 1 to view installation summary and Enter 2 to view installation logs
[1] {"!" exits} !
You have new mail in /var/mail/root
bash-3.00#
bash-3.00# cd /var/opt/mps/serverroot/slapd-AM55-zone
bash-3.00# ./start-slapd

Thanks samk,
After the installation, I have started the Directory server,admin,and console with following commands:
bash-3.00# directoryserver start
bash-3.00# directoryserver start-admin
SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
warning: daemon is running as super-user
[LS ls1] http://AM55-zone.ipsolutionshowcase.com <http://AM55-zone.ipsolutionshowcase.com> , port 390 ready to accept requests
startup: server started successfully
bash-3.00# directoryserver startconsole
Recieved the Login console window,logged in and got the ipsolutionshowcase tree.
What are the next steps I need to folow in order to launch the Access Manager page?
Ant thoughts?
Thanks for ye help
Sid

Unable to enter Agent name and port details while doing ODI (11.1.1.6) installation on Solaris

Unable to enter Agent name and port details while doing installation on Solaris, Installation wizard is moving slowly and at 'Specify Agent Details' page it is not allowing me to enter the details and now I am not able to continue installation.
Please let me know if I am missing anything and there is any solution.

just in case cross verify the certiication matrix for 11.1.1.6
http://www.oracle.com/technetwork/middleware/data-integrator/odi-11gr1certmatrix-163773.xls
Thanks,
Saichand

11gR2 installation on Solaris failed with prereuisite 124861-15

The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.

Hi,
The 11gR2 installation on Solaris 10 sparc failed with prereuisite 124861-15.
When I tried to install the patch 124861-20, it failed with the following(see below):
I have Sun Studio 12-2 installed on the system.
It was complaining that some packages (SPROmrcom, SPROlangx, SPROlang,SPROsunms ) are not installed.
Where can I get these packages? Should not it be included in the Sun Studio 12-2 installation?
Thanks.
Zhigang
# patchadd 124861-20
Validating patches...
Loading patches installed on the system...
Cannot find package name, arch or version in pkginfo file /var/sadm/pkg/IR/pkginfo.
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SPROmrcom from directory SPROmrcom in patch 124861-20 is not installed on the system. Changes for package SPROmrcom will not be applied to the system.
Package SPROlangx from directory SPROlangx in patch 124861-20 is not installed on the system. Changes for package SPROlangx will not be applied to the system.
Package SPROlang from directory SPROlang in patch 124861-20 is not installed on the system. Changes for package SPROlang will not be applied to the system.
Package SPROsunms from directory SPROsunms in patch 124861-20 is not installed on the system. Changes for package SPROsunms will not be applied to the system.
Checking patches that you specified for installation.
Done!
The following requested patches will not be installed because
the packages they patch are not installed on this system.
0 No Packages from patch 124861-20 are installed on the system.
Refer my post *11gR2 Installation Error with patch 124861-15 as pre Req*
http://appsdbaworkshop.blogspot.com/2010/11/11gr2-installation-error-with-patch.html
thanks,
X A H E E R

Wu-ftpd installable for solaris 10 and solaris 9

Hi,
I could see only "proftpd" is available http://www.sun.com/software/solaris/freeware
But I am looking for the "wu-ftpd" server which is compatable with Solaris 9 and Solaris 10.
Any one help me from where I can get the "wu-ftpd" installable for solaris 9 and solaris 10 sparc server.
thanks,
Amudha

Hi Robert,
Thanks for your reply.
I too saw that the ftp version used in solaris 10 by default is wu-ftpd, but I am not sure about it, because when I tried to ftp to my solaris box the version it is started is not "FTP server (Version wu-2.6.2(5)".
I have got the wu-ftpd installable. But I could not get the proper document for configuring the same.
Question1: How to stop existing ftp service and start newly instlaled wu-ftpd in Solaris 9 and Solaris 10 servers?
Earlier solaris 8 version I change the ftpd version in /etc/inetd.conf file and give HUP signal to inetd then this new wu-ftpd version will be used.
Question 2: It always starts the system inbuilt ftp server and also I am getting ftp log in failure for any user which I add newly or even existing users.
could any one help to resolve these issues? Thanks in advance for your help.
Amdudha

Installer/Software Update problems

I am having problems with installing or updating some software. When I try to start the installer, it acts as though it is going to work: the icons in the dock move to make room for another icon but then move right back and close the gap. The installer never runs long enough to generate or change the display. This has happened with three different software packages: iMacEFIUpdate1.3; Kodak EasyShare v 6.0.2; and Parallels-Desktop-5582-Mac-en-ND.
I talked to Kodak about the problem. All they wanted to do at first was help me download the installer. After I convinced them I had a good download, they sent me a CD containing the software. Same result - no installation.
The problem with the iMacEFIUpdate1.3 happened today. It was part of a group of six updates and I was not at the computer while the updates were being downloaded and installed.
Other software updates and installations have worked with no problems.
I have repaired permissions, but did not start from the installation disk. Could this be the problem?
I am at a loss as to what to try next. Does anyone have a solution?

Easyshare 6.0.2 when downloaded from Kodak is a standalone installer Application, not an installer package ....it can't be opened directly by "Installer" but should simply run on its own when double-clicked. I imagine that the Kodak supplied CD version is exactly the same.....
ctrl-click on the easyshare installer, choose 'get info' , in the 'Kind' section it will likely say "Application - Universal" If so, then that explains why 1: Installer won't open it, and 2: why there's no 'open with' dialogue for it.
The previous system should be ( just as your Console message said...) in HD/Previous Systems.localized/Previous System 1/ It's not normally invisible.
http://docs.info.apple.com/article.html?artnum=107120 explains how the Archive and Install works, I don't know offhand why some people get Previous Systems.localized rather than plain 'Previous Systems' but it doesn't seem uncommon.
Apple say "Don't install older versions of Mac OS than what comes with your computer" so I wonder if that might cause you problems later? Certainly something seems off here ( the default application for anything shouldn't be pointing at something in the Previous System )
Anyway, assuming you're gonna soldier on for now with Tiger on a Leopard-shipped Mac.... I guess that leaves the Easyshare installer not working? If you've double-clicked the Easyshare installer, it bounced in the Dock, and nothing more happened; there might be something in the Console log explaining why.... or a crash log for it in /Users/BigBob/Library/Logs/CrashReporter/
try the Easyshare installer app again - & look at the console log for clues while you do it.

Wenn ich auf meinem winxp itunes 10.5 installieren will kommt folgendes: Es liegt ein dieses Windows Installer Paket betreffendes Problem vor. Ein für den Abschluss der Installation erforderliches Programm konnte nicht ausgeführt werden. Wenden sie sich

wenn ich auf meinem winxp itunes 10.5 installieren will kommt folgendes:
Es liegt ein dieses Windows Installer Paket betreffendes Problem vor. Ein für den Abschluss der Installation erforderliches Programm konnte nicht ausgeführt werden. Wenden sie sich an das supportpersonal oder den hersteller des paketes.
Kann jemand helfen ???

Es liegt ein dieses Windows Installer Paket betreffendes Problem vor. Ein für den Abschluss der Installation erforderliches Programm konnte nicht ausgeführt werden. Wenden sie sich an das supportpersonal oder den hersteller des paketes.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Installation in solaris Problem

Similar Messages

Maybe you are looking for