Installation instructions for Sattelite A200 needed

Recently have appeared the drivers for Sattelite A200 PSAEC. But there are no instructions for the installation order... Could somebody help me? So let's assume that I have a clean WIN XP SP2 installation on my laptop, without anything else... so what's next?
(I also noticed that there is a mistake in the Accesibility drivers description, it says:Description: The TOSHIBA Accelerometer Utilities are a set of hardware utilities that work with the motion sensors built into your machine. With the Accelerometer...) but this is not so important..
Thanks.

Hello Vetko
I know that this instructions document is a little bit confusing but I will try to clarify this. This list will be used by Toshiba to create recovery image. Because of that this list is so large and complicated.
Please do not be confused and install offered stuff from Toshiba download page in the order listed there. if you see something on the list but not on download page just install next driver, tool or utility. When you finish installation run Microsoft updates at first. After doing this you will be sure the Os is up-to-date.
Bye

Similar Messages

  • Need Dreamweaver code coloring scheme installation instructions (for Creative Cloud CS6)

    Need Dreamweaver code coloring scheme installation instructions (for Creative Cloud CS6)
    I'm on a mac os x 10.7.4

    Might check to see if you have an older version of Acrobat X installed previously under
    Mac HD > Applications > Utilities > Adobe Installers
    If you have an uninstaller for Acrobat X try uninstalling it then installing again like you did through Creative Cloud.
    -Dave

  • Re: Satellite A30: Need installation instructions for XP Pro

    Dear all,
    after a hd-crash i have to install XP on my A30. I cant find the recovery-cd so i bought a new version of XP pro.
    Unfortunately i'm not able to find any installation instructions for my modell :(
    Only drivers and utilities could be downloaded...
    Has anyone experience in insttalling in the right order...i know that toshiba only likes it in their right way ;)
    regards
    Claudia

    Well, the driver installation is very easy.
    After successful installation of the Win XP OS in this notebook download all available Toshiba drivers and MS QFEs and install it.
    The right installation order would be advisable but its not a bible. So you could try your own install order.
    I would recommend installing the chipset utility after the installation of all QFEs from Toshiba page.
    Best regards

  • Where can I find installation instructions for JDBC driver?

    Is any one here to help me out by pointing out where I can find the installation instructions for the downloaded oracle 8i jdbc driver?
    Thanks

    Hi,
    You will find the installation instructions for JDBC Driver in the JDBC Developer's Guide & Reference.
    Here is a direct link to it http://otn.oracle.com/docs/products/oracle9i/doc_library/901_doc/java.901/a90211/getsta.htm
    Hope this helps,
    OTN Team

  • Installation instructions for .tar.gz a weird fantasy?

    On Linux (Debian Lenny) the installation instructions for the *installer*.tar.gz download file say:
    Unpack file.
    Navigate into directory or folder created.
    Run install program.
    But no directory created; no install program - what the hell is going on??
    What you get is a single *.so file.  What do you do with it?
    I got it to work in the past, but perhaps by a different method.  So the system can do it.  Thanks any help.

    Worked it out:
    apt-get purge anon-proxy
    (this program seems to be the problem??)
    Then did, do not know if necessary:
    export HTTP_PROXY=
    export http_proxy=
    (To loose these environment variables if they are present, I assume.)
    wget -O - http://backports.org/debian/archive.key | apt-key add -
    (This is the step that would not work before.  It worked alright now.)
    apt-get install --reinstall --purge flashplugin-nonfree
    (Simply installs the adobe flash player into iceape, presumably.)
    Look - this is sinister:  Why do the install instructions bear no relation to any sort of reality?  Are the microsoft dirt up to something?

  • Are there any Installation instructions for adding an MCE internal Blu-Ray burner to a Mac Pro(2013) running OS X Montain Lion?

    Looking for any installation instructions or assistance in adding hardware (MCE internal blu-ray burner multi-drive14x) to my Mac Pro system running the latest version of OS X Mountain Lion.

    Ask the vendor if they provide installation instructions. Otherwise, do a Google search for links on installing optical devices in a Mac Pro.

  • Need RAM Installation Instructions for mac mini intel duo core

    I just purchased two gig of ram for my intel duo core mac mini and cannot figure out how to install. I was able to get the cover off - but where does the RAM go?
    I can't find any instructions on the apple support page for the mac mini.
    All of the links in discussion board that I found are for instructions on installing ram on single processor mac mini which uses different type of ram and is installed in diff location.
    Any help greatly appreciated.

    I found a video here at owc: http://eshop.macsales.com/tech_center/index.cfm?page=Video/mini/intel/high.html

  • FYI: Installation instructions for Oracle products

    Since there are still so many questions about installation:
    Please read: http://www.suse.de/en/support/oracle/
    Yes, these are (my) SuSE pages, and of course I'd like you to use SuSE Linux. However, the instructions and the patches and rpm's are generic, and have been proven (at Oracle HQ in Redwood City) to work perfectly well on Redhat. Of course, since Linux is Linux - we all use the same kernels, and the same libraries, distributions are about packaging and services, the Linux system is the same.
    Example our Oracle 8i instructions:
    The instructions are generic anyway, and the downloadable archive we provide includes
    - a patch for Oracle 8i, which includes the 8.1.5.0.2 patch from Oracle
    - some additional patches of annoying bugs
    - 3 rpm's: JRE 1.1.6v5 (also tested to work on Redhat - of course, see above), tcl75lib (the Agent needs Tcl 75; also works on Redhat, of course), and orarun.rpm, which are SysV startup scripts for automatic Oracle startup /shutdown at system boot/shutdown time. This last package is slightly SuSE specific, and will not work without changing a few lines of the script manually, but that's pretty easy to do.
    We also changed 'runInstaller' slightly to catch some of the most common errors that users encounter. We have had lots of very positive feedback from users - and we're waiting for yours. Some of our patches have made it into Oracle patches, and will be in Oracle 8.1.6 right from the start, since we're working closely with Oracle (SuSE was the first Linux distributor to have a full time engineer onsite at Oracle HQ).
    Oracle 8i has been certified by Oracle against SuSE Linux 6.2 and 6.3, of course.
    Have fun!
    PS:
    - SuSE Linux only recently won the 'Best Distribution' award at LinuxWorld Expo in New York (February, choosen by the visitors, not an anonymous committee).
    - SuSE has more than 300 employees worldwide (12 months ago: ~60)
    - SuSE has been in business since 1992, in the Linux business since 1993
    - Our investors include Intel, and our bottom line has always been positive
    Come and see us at CeBIT (starts 24 February in Hannover, Germany, and is the largest trade show on eart(!) with more than 7500 exhibitors and more than 700000 visitors)!
    PS^2:
    Feel free to ask me, if you still have installation troubles! We always welcome feedback, so that we can make the installation process even simpler. It will also flow back to Oracle, of course, and will improve the standard Oracle installation procedures (after all, we really don't want to make a living patching Oracle's installation bugs....).
    null

    maybe this will help
    http://docs.oracle.com/cd/E37097_01/doc/install.42/e35123/toc.htm
    http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-getting-started-1863613.html
    regards,
    drama9346

  • Where can I get installation instructions for older Sony electronics?

    I would like to have diagrams, wiring schematics, parts and accessaries lists for a CDX-GT40W cars stereo and a EXCD-3RF CD changer.

    We only have the CDX-GT40W operating instructions available. You can visit http://www.scosche.com/  for INSTALLATION ONLY. 
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • Setup instructions for airport extreme needed

    Can anyone please suggest some good instruction sites or downloadable files for the airport extreme?
    I tried to install one previously and it didn't work and I returned it, but I would like to try again.
    I have a 2008 mac pro on ethernet, an xbox on ethernet and a 2007 mbp and two 2009 mbps plus a 3g iphone and a windows xp pc that I can currently use on my Belkin pre-N router with Virgin internet.
    The pc has a Belkin usb N adapter for its connectivity.
    The system works pretty well but I was wondering if I would get better speed or coverage from an airport extreme.
    Two concerns that I have are that the airport extreme seems to be several years old now (2007?) and I am wondering if it is due for an update soon?
    Also, to get faster speeds or less interference, will I be able to set the airport extreme to the 5 ghz band and still have connections to all my current hardware?
    Thanks for any advice.

    Luis Ortega wrote:
    Can anyone please suggest some good instruction sites or downloadable files for the airport extreme?
    Try this:
    http://manuals.info.apple.com/enUS/AirPort_Extreme_Early2009Setup.pdf
    The system works pretty well but I was wondering if I would get better speed or coverage from an airport extreme.
    That's hard to say. Sometimes speed and/or coverage on the 5 GHz band can be worse than on the 2.4 GHz band, depending on several factors.
    Two concerns that I have are that the airport extreme seems to be several years old now (2007?) and I am wondering if it is due for an update soon?
    According to Mactracker version 5.2.1 (not the latest version), the newest AirPort Extreme was released in October 2009.
    Also, to get faster speeds or less interference, will I be able to set the airport extreme to the 5 ghz band and still have connections to all my current hardware?
    The newest AirPort Extreme can use the 5 GHz and 2.4 GHz bands at the same time.

  • Adobe Reader Installation Instructions for Mozilla Firefox problem

    hello. i am trying to finish installing adobe reader, however, i get this request: "Mozilla Firefox will not install Adobe Reader from web sites until you add them to the Allowed List. Please follow the steps below."
    and here is where the problem begins, the first thing i am told to do is to: "1. Look for a yellow bar at the top"
    http://www.adobe.com/products/reader/dlm/images/step1.gif
    and then to:
      Click on the “Edit Options…” button in the bar to continue with download"
    however, there is no yellow bar, [or any other colour], nore is there an "edit options" to select.
    they simply are not there!!!
    please help me!!!
    thank you !!

    Hi all,
    It seems that Adobe DLM does not like the new firefox version I have tried on two machines, Vista 32bit and Winxp SP3, it quits on both machines between 60 and 94% (DLM crashes and shuts down) Manual install works
    Is it just me ?
    BEFORE any one says, I only use Firefox, I do not use Internet Exploiter (if I could convince the manufacturers of the install software I use to make a *nix or mac version I would get rid of M$ OS's
    Regards,
    GG

  • Instructions for Installing Router Needed

    I accidently unplugged my Linksys Wireless G 2.4   (GHz),  and I'm now trying to reinstall it.  I put the CD rom in that came with it, but it doesn't show the screen that says, "Click here to start."  When I click the "Set upWizard" icon, all that pops up is a little icon with "Linksys" on it.  An icon with "autorun" is also on the screen.  When I click it, it tells me to choose and application, but I have no idea which to choose.  I've tried clicking going eeny, meeny, minee, mo, but have had no luck.
    I have a Mac OS X 10,2.  Can anyone help me? 
    Thanks!
    Lorraine
    [email protected]

    You do not need the CD to configure the router.You can configure the router manually.
    If your Internet Service Provider is Cable follow this link to configure the router.
    If your Internet Service Provider is DSL follow this link to configure the router.

  • Install instructions for CS6 upgrade for WIndows missing - in what order should files be run?

    After over 14 days of dealing with the idiots at Adobe Support, opening and closing of 2 cases multiple times, promised emails not being sent (and being blamed for having my email set up to filter out Adobe emails), attempts to charge me for the already approved "free" upgrade, and then having an order for a physical disk version of the CS6 upgrade cancelled by some bonehead, I finally was able to download the CS6 upgrade files.  Only to discover that there are no installation instructions for Windows if you did not use the Akamai download manager (which I did not).
    There are a total of 6 files in the download directory, all downloaded from the CS6 upgrade download page. 
    - In what order should the files be run?  Just run the .exe files, or do some files need to be extracted/unzipped first?
    A second question: my CS5.5 version was never installed, and never registered. 
    - Will the CS6 upgrade accept its serial number directly, or do I have to do something else through Adobe Support?
    --  WTW

    Which files: all of them on the CS6 Production Premium upgrade download page.
    ProductionPremium_CS6_LS7.7z
    ProductionPremium_CS6_LS7.exe
    PremierePro_6_Content_LS7.7z
    PremierePro_6_Content_LS7.exe
    Illustrator_16_Content_LS16.exe
    Download_and_Install_Instruction_all.pdf
    The last one is useless.
    The Speech Analyzer Models were downloaded separately, from another page.  I assume they should be installed after everything else is installed and working.

  • Instructions for Oracle Database Server Version 10.2.0.4 Patch 49

    Hi !
    Before trying to do anything on the database by applying the patch I received from Oracle, I want to be sure to fully understand the readme file that is with the patch.
    Oracle 10g.
    Dataguard configuration
    I need to do CPU patch. I follow the patch instructions, but I have some questions about these steps to do:
    1. Back up the current database that is installed, the %ORACLE_HOME% directory and Oracle inventory under c:\Program files\oracle directory.
    Question: I suppose I have to do a rman backup right?
    2. Perform a clean shutdown of all Oracle services (databases, Oracle listeners, Oracle agents, and so on.) that run from the Oracle Home where you install this patch. Shutdown all MTS/COM+/.Net applications that access Oracle databases.
    Question: All that is required for a clean shutdown is done with a shutdown immediate command, right?
    I know my database is not RAC, but it certainly has an Automatic Storage Management. Is it stopped with the shutdown command?
    3. Stop all Oracle services, Recovery catalog, ODBC applications, and other applications that use Oracle Client. This may include Web servers that load the Oracle client in the mid-tier environment.
    Explicitly stop the Distributed Transaction Coordinator service (which is not an Oracle service) if it is running.
    Question : I shall have a look at the Services and stop all the services that were not stopped after the shutdown immediate command, right?
    4. Make sure no application are using the driver sqora32.dll
    Question: How to check that no application are using this driver?
    There are in the following preinstallation instructions notes for bug 8292378, data guard bug fix 8227106, bug 6798650 and bug 8866013.
    I see that bug 6798650 is for RAC only, so as my database is not RAC, I don't have to take into account this note.
    5. I have this for the Pre-install steps for Data Guard bug fix 8227106:
    Disable Fast-Start Failover if it is enabled.
    Stop the Data Guard broker observer.
    Disable the configuration.
    Stop the broker on all databases by setting the DG_BROKER_START initialization parameter to FALSE.
    Question: how can I disable fast-start failover?
    Next I look at the Installation Instructions:
    I have in the readme:
    - patch installation instruction for single instance
    - patch installation instruction for RAC (won't use it, as my database is not RAC)
    - installation instruction for Oracle Instant client :
    - installation instruction ODP.NET 1.x or 2.x : I see ODP.NET on the Oracle directories.
    Which patch installation instruction should I follow, according to my database configuration, single instance?
    Appreciate any help.

    1. Back up the current database that is installed, the %ORACLE_HOME% directory and Oracle inventory under c:\Program files\oracle directory.
    Question: I suppose I have to do a rman backup right?No, but yes... I mean, in the documentation is refering at directory, not database. When you use the patch, some files will be change, so if you need rollbackup you need a copy of your ORACLE_HOME and c:\Program files\oracle. Just copy this directories in another place.
    I mean yes because it's recommended backup database too.
    2. Perform a clean shutdown of all Oracle services (databases, Oracle listeners, Oracle agents, and so on.) that run from the Oracle Home where you install this patch. Shutdown all MTS/COM+/.Net applications that access Oracle databases.
    Question: All that is required for a clean shutdown is done with a shutdown immediate command, right?
    I know my database is not RAC, but it certainly has an Automatic Storage Management. Is it stopped with the shutdown command?No, all services, if you only run "SQL>shutdown immediate" you are only stopping database, not ASM, not Listener,....
    3. Stop all Oracle services, Recovery catalog, ODBC applications, and other applications that use Oracle Client. This may include Web servers that load the Oracle client in the mid-tier environment.
    Explicitly stop the Distributed Transaction Coordinator service (which is not an Oracle service) if it is running.
    Question : I shall have a look at the Services and stop all the services that were not stopped after the shutdown immediate command, right?srvctl stop service -d <database name> -s <Configured workload management service> -i <instance name>
    srvctl stop instance -d <database name> -i <instance name>
    srvctl stop asm -n <nodename>
    4. Make sure no application are using the driver sqora32.dll
    Question: How to check that no application are using this driver?http://superuser.com/questions/399659/how-can-i-identify-what-application-is-using-a-given-file
    5. I have this for the Pre-install steps for Data Guard bug fix 8227106:
    Disable Fast-Start Failover if it is enabled.
    Stop the Data Guard broker observer.
    Disable the configuration.
    Stop the broker on all databases by setting the DG_BROKER_START initialization parameter to FALSE.
    Question: how can I disable fast-start failover?are you using Data Guard? if not skip this step, if Yes:
    http://docs.oracle.com/cd/B19306_01/server.102/b14230/sofo.htm#BCGJEGAF
    Next I look at the Installation Instructions:
    I have in the readme:
    - patch installation instruction for single instance
    - patch installation instruction for RAC (won't use it, as my database is not RAC)
    - installation instruction for Oracle Instant client :
    - installation instruction ODP.NET 1.x or 2.x : I see ODP.NET on the Oracle directories.
    Which patch installation instruction should I follow, according to my database configuration, single instance?Only you know what configuration do you have.
    Probably "patch installation instruction for single instance", but be sure that this patch will apply in a database and not in a RAC or in a Client or ODP.NET

  • Where to find installation documentation for 10gR2 to OEL?

    Where is the best installation instructions for Oracle 10gR2 to Oracle Enterprise Linux 5 (U6)?
    The current system environment is Oracle Enterprise Linux 5 U6 on VMware ESXi, 4.1.0, 260247.
    Now looking to install Oracle 10gR2 to the 64 bit OS.
    Should the "Oracle® Database Installation Guide 10g Release 2 (10.2) for Linux x86-64 Part Number B15667-03" be used?
    Or is there article?
    I question this as during the preinstallation tasks, I noticed that several of the packages were not install during installation.
    (Should this be posted under a Oracle Linux forum?)
    Thanks,
    (BLL)

    user10860953 wrote:
    Where is the best installation instructions for Oracle 10gR2 to Oracle Enterprise Linux 5 (U6)?
    The current system environment is Oracle Enterprise Linux 5 U6 on VMware ESXi, 4.1.0, 260247.
    Now looking to install Oracle 10gR2 to the 64 bit OS.
    Should the "Oracle® Database Installation Guide 10g Release 2 (10.2) for Linux x86-64 Part Number B15667-03" be used?
    Or is there article?
    I question this as during the preinstallation tasks, I noticed that several of the packages were not install during installation.
    What's to question? The installation guide is for installing the database product, not the OS. They simply state what is expected/required of the OS. Meeting those prerequisites is outside of the scope of the database installation guide.
    (Should this be posted under a Oracle Linux forum?)
    For correctly installing the OS, probably so. If it's just a matter of missing packages, you need to configure to use oracle's free public yum server (I don't have the url handy - google is your friend), and install the 'oracle-validated' package.
    Thanks,
    (BLL)

Maybe you are looking for