Installation Issue with Dreamweaver. (Error 1935, Exit code 7)

Hey there,
So I've been googling my little heart away for 8 hours now and I haven't found any results.
I'm installing on a x64 Win 7 system. From my googling I found out that the relevant part of the installation log is:
Feature: Microsoft_VC80_ATL_x86_
Action 19:23:42: PublishProduct. Publishing product information
[ 808] Tue May 15 19:23:43 2012 INFO
Error 1935.An error occurred during the installation of assembly component {97F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRESULT: 0x800736CC.
Action ended 19:23:43: InstallFinalize. Return value 3.
Here is the in-installer error logs
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 19 error(s), 19 warning(s)
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: OS requirements not met for {A1BC7068-C1BA-410F-8B9A-DB807C803DE2}
WARNING: OS requirements not met for {C79312BD-3E76-4474-A10C-1435D1856A4B}
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: MsiConfigureProductEx failed with error: 1603
ERROR: The following payload errors were found during install:
ERROR: - Adobe Media Player: Install failed
ERROR: - SiteCatalyst NetAverages: Install failed
ERROR: - Microsoft_VC80_ATL_x86: Install failed
ERROR: - DeviceCentral_DeviceCentral3LP-en_US: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Adobe ReviewPanel CS5: Install failed
ERROR: - CSXS Story Extension: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: - Adobe CSXS Extensions CS5: Install failed
ERROR: - Creative Suite 5 Design Premium: Install failed
ERROR: - HIL Help Search: Install failed
ERROR: - Adobe Dreamweaver CS5: Failed due to Language Pack installation failure
ERROR: - Adobe Dreamweaver CS5_AdobeDreamweaver11en_USLanguagePack: Install failed
ERROR: - Adobe Extension Manager CS5: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: - Adobe AIR: Install failed
I've already tried installing it while in safe mode, repairing my .NET Framework, and sfc / scannow.
Anybody have any ideas?
Edit: added in-install log

Hi Vikas... can you help me with this error... i was trying to install dreamweaver w no success..
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Archivos de programa\Adobe Dreamweaver CS6\Adobe Dreamweaver CS6\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed

Similar Messages

BI Installer issue with message" Error: ABAP Backend doesn't exist in SLD

Dear All
Please help me to solve this issue, during the BI Installer the process get errors message
"Error: ABAP Backend doesn't exist in SLD"
Follwoing the oss Note 983156 - BI configuration w. Template Installer
1.Logon to the SLD: http://<host>:<port>/sld. (Your configured SLD (central or local SLD))
Please check in Home -> Technical Systems -> select type ABAP. This
should have configuration of your ABAP (BI) system. yes the system already there.
2, goto http://host:port/index.html ->Web Dynpro ->Content Administrator-> Check SLD Connection
the connection is running well.
Please any one can help me to solve this issue,
Thanks and Best Regards,
Chrisna

Hi
I found your question because I wanted the answer to it too. I'm trying to connect my Java-only stack portal to my ABAP-only stack BI system using the template in NWA. I get through all the steps up to the creation of the WebDynpro JCO RFC destinations then it fails saying "ABAP Backend doesn't exist in the SLD".
I've checked the SLD and the ABAP backend most definitely DOES exist in the SLD and the SLD is being updated by both the ABAP backend and the Java portal systems thus proving a valid connection exists between the SLD and both systems I'm trying to connect.
I think I've solved it however.
I always define a TCP alias equal to the SID for any SAP system I build and I try to make all connections to <sid>.<fully.qualified.domain.name>. This separates, to a degree, the physical server from the SAP instance.
I used this alias in the BI installation template but I noticed that the ABAP backend was listed as <SID> <hostname> in the SLD (not <SID> <sid alias>). When I used the real hostname in the template it ran to completion.
The other change I made, and it's possible that this was the real reason instead of the alias/hostname issue, was that I restarted the BI system before retrying. I only did this because I was getting error messages saying there were too many active CPIC conversations and I couldn't find them to kill them off.
Hope one or other of these things might help.
Murray

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I cannot install Creative Suite 5.5 on my Windows 7 Professional. I keep getting error message: "Exit Code: 15 - Media DB sync failed". I have disabled UAC and Startup items and Services with no luck. Can you please help?

I am sorry Erickkasner but there is no longer direct support provided for Creative Suite 5.5 installation issues.
You are welcome to post any specific errors you are able to discover within your installation log to this discussion. Since you are using Windows then Exit Code 15 could mean one of the following:
Installer database is corrupted
Update pending to your operating system
Improper permissions set for the Media.db
The installation log file should provide additional insight into the exact error you are experiencing. Please make sure to use the find command to look for the words 'ERROR' and 'FATAL' to locate the relevant error messages.

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshoo

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

Adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly compo

adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.

This did not resolve my issue, it actually made things worse. I did what
you had told me to do below, and it did not work. Tried to access the
internet to respond back to you and my computer was not able to reach the
internet. Tried reaching adobe support and not was able to, even tried
calling was on the phone for 20 minutes and no one answered. I was not able
to re install windows. Contacted Asus from another computer and they were
not able to help me reinstall windows They had asked me to ship my computer
back to them, due to them not being able to resolve the issue and help me
reinstall windows. I luckily had a backup on my external hard drive and was
able to reinstall windows 8. Spent over an hour and half trying to fix
that. Here I am still not able to install adobe reader. I was very unhappy
with what I was told to do and it gave me this issue.
· Open an Administrator command prompt: Right-click Start > All Programs >
Accessories > Command Prompt and select Run As Administrator. Click Allow
for the elevation prompt
· In the command prompt, type the command below:
fsutil resource setautoreset true C:\
The line above assumes that C: is the drive in which Vista is installed. If
it is installed on another drive like D:, change the drive letter
appropriately.
· Restart the system.
· Install Acrobat or Adobe Reader again.

*** ERROR = The Java VM terminated with a non-zero exit code.

DEAR MASTERS
          after configuring SLD on integerated ABAP+JAVA   server0 not starting
trc file: "D:\usr\sap\W55\DVEBMGS00\work\dev_server0", trc level: 1, release: "700"
node name   : ID9278150
pid         : 4140
system name : W55
system nr. : 00
started at : Sat Mar 21 08:45:23 2009
arguments       :
       arg[00] : D:\usr\sap\W55\DVEBMGS00\exe\jlaunch.exe
       arg[01] : pf=D:\usr\sap\W55\SYS\profile\W55_DVEBMGS00_wipro5
       arg[02] : -DSAPINFO=W55_00_server
       arg[03] : pf=D:\usr\sap\W55\SYS\profile\W55_DVEBMGS00_wipro5
       arg[04] : -DSAPSTART=1
       arg[05] : -DCONNECT_PORT=1060
       arg[06] : -DSAPSYSTEM=00
       arg[07] : -DSAPSYSTEMNAME=W55
       arg[08] : -DSAPMYNAME=wipro5_W55_00
       arg[09] : -DSAPPROFILE=D:\usr\sap\W55\SYS\profile\W55_DVEBMGS00_wipro5
       arg[10] : -DFRFC_FALLBACK=ON
       arg[11] : -DFRFC_FALLBACK_HOST=localhost
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 4668] Sat Mar 21 08:58:30 2009
[Thr 4668] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 4668] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4668] JLaunchISetClusterId: set cluster id 9278150
[Thr 4668] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4668] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 4428] Sat Mar 21 08:59:58 2009
[Thr 4428] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4428] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 4616] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 4616] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.

Hi,
Please find the link below for J2EE start up problem.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e09e4a5e-8280-2a10-ca98-a59dd47d396d]
Please refer to following note for VM settings.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=723909]
Please also check the license validity on this server.
Hope this helps.
Manoj Chintawar

Issue with Dreamweaver - Server Busy error message

Hi,
Whenever i open Dreamweaver, i see "Server Busy" error message. I am unable to use the application due to this. Can you please help resolve this right away?
Regards,
Raghu

I am using Dreamweaver CC. This problem started after a recent update I think.
Operating system - Windows 8.1 Professional
Basic system config in case you need it - 8 GB RAM, 2 TB HDD, Intel i7
Regards,
Raghu
Date: Fri, 20 Dec 2013 11:18:44 -0800
From: [email protected]
To: [email protected]
Subject: Issue with Dreamweaver - Server Busy error message
    Re: Issue with Dreamweaver - Server Busy error message
    created by Nancy O. in Dreamweaver support forum - View the full discussion
Which ver and build # of DW?
Which operating System?
Do you use a testing server?
If so, which one and is it running?
   Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5948026#5948026
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5948026#5948026
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5948026#5948026. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Adobe Acrobat XI installation fails when get Error 1935 "during installation of assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E} HRESULT: 0X8007054F

Adobe Acrobat XI installation fails when get Error 1935 "during installation of assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E} HRESULT: 0X8007054F

Hey Nicholas,
The following link might help in resolving your issue :
http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html
Please let me know if this helps with your issue.
Regards,
Rahul

Java VM terminated with a non-zero exit code (rc = -337)

Hi,
It seems that our portal (7.0) was unavailable for five minutes (all users experienced problems which after a few minutes solved itself). We had a look at the logs, and dev_server0 shows that the server node did shut down and start again:
[Thr 6688] Wed Aug 13 10:19:36 2014
[Thr 6688] JLaunchIExitJava: exit hook is called (rc = -337)
[Thr 6688] **********************************************************************
[Thr 6688] *** ERROR => The Java VM terminated with a non-zero exit code.
[Thr 6688] *** Please see SAP Note 943602 , section 'J2EE Engine exit codes'
[Thr 6688] *** for additional information and trouble shooting.
[Thr 6688] **********************************************************************
[Thr 6688] JLaunchCloseProgram: good bye (exitcode = -337)
The referenced note doesn't offer much help. I've tried to find more info about rc -337, and the only info I've found is that rc -337 is: "Exiting listener loop - restart the node (MSLib)."
Do you guys know what exiting listener loop means, or what the rc -377 is?
Thanks!
M.

Hi Moye,
Hope you are doing good.
Such issues can also be caused due to a network failure. Can you check the below notes along with the network administrator to ascertain that there are no network related issues presently:
#124562     Hostname resolution problems (DNS timeouts)
#500235     Network Diagnosis with NIPING
#413330     Network timeout
If you run the niping tool at the time the issue occurred, it should check the whole network and report the error.
It is also possible to optimize the j2ee server in the manner it interacts with the message server for better performance. As Divyanshu mentioned, the note 1658385 - J2EE System fails with "exitcode = -334" explains, you need to optimize the manner in which the message server reconnects with the Java instances.
This can happen sometimes if you have quite a few nodes in cluster. To make sure the issue does not happen again, you need to increase for each server node the timeout it waits for the confirmation,
that is the value of 'ms.confirmation.timeout' property of ClusterManager along with the other parameters mentioned in the note. Also add the below parameters to the SCS instance file:
<sid>_SCS01_<host> in folder /usr/sap/<sid>/SYS/profile
ms/max_clients = 600
ms/max_open_requests = 2000
ms/audit=1
and
jstartup/keep_old_logfiles=3
The latter 2 parameters will prevent overwritting log files in case of restart. Once the values are increased, the time for the timeout should increase enabling the server to connect to the message server.
Thank you!
Kind Regards,
Hemanth
SAP AGS

Installing onto a second computer? Getting this error message: Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW006 ... -------------------------------------- Summary -------------------------------------- - 0 fa

Hi there,
I have just installed creative cloud on my mac laptop and am trying to download lightroom and photoshop (as a second computer) and am getting this error message
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.4.0.0 Adobe Photoshop Lightroom 5.pkg_5.4 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

See:
Exit Code: 6, Exit Code: 7 Installation Errors -
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

The Java VM terminated with a non-zero exit code.

Hi,expert,
I have got this error when I am trying to restart the sap Instance use
command STARTSAP,
The error log as below:
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 940893 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
trc file: "/usr/sap/J2E/JC00/work/dev_jcontrol", trc level: 1,
release: "640"
ERROR => can't retrieve client list (rc=24) [jcntrms_mt.c960]
May 21, 2010 12:53:14... com.sap.engine.core.Framework [SAP
J2EE Engi
ne|MS Socket Listener] Fatal: Critical shutdown was invoked. Reason is:
Exiting
Listener Loop. This requires a restart of the node. Possible reason is
an interr
upted reconnect session to the message server.
Thanks and Best regards,
Michael

Hi Michael,
I am also facing the same issue, can you please let me know where to find the ms.hostname and enqu.hostname...It's very urgent.
Thanks in advance..
Regards,
Krishna.M

Itunes 5 and 5.0.1 installation quit with no error-message

when i start the installer (in version 5 and 5.0.1), itunes beginn to install. it all works fine, it create an desktop-shortcut, but then the installer quit with NO ERROR-MESSAGE (and the desktop-shortcut is deleted, too!)!
so now i have no itunes, can't hear my music with my airport express, can't sync my ipod or listen to my music from the itunes-music-store. thank you apple!
I have no norton-tool on my computer, i have the latest windows-installer, all necessary services are running and i tried all the tips from the board, but nothing work for me.
what else can i do to install itunes?

hi Tom!
please tell me your solution so i can use my itunes again.
sorry, i'm not sure exactly what toonz's easy solution is. but here are some harder-to-implement suggestions that seem to have been having success with the "vanishing installation" (or "the lady vanishes"):
b noir, "ITunes install issues (registry settings not installed)" #1, 10:16pm Sep 19, 2005 CDT
keep us posted.
love, b

Ssis execute process task error: process exit code was 1 while the expected was 0

Hi Sir,
in my SSIS Package(2012) i am using Execute Process Task which will call bat file. bat file is located on UNC Path.i am having the below script in the batch file.
del \\servername\foldername\name.txt
rcmd \\servername D:\name1.bat
del \\servername\foldername\name2.txt
xcopy \\servername\foldername\file.txt \\server\foldername\outfilefolder
i am getting the below error message:
ssis execute process task error: process exit code was 1 while the expected was 0
i want know at what cases error exit code was 1?
Thanks for your time.

Hi prasad.alm,
The error is generic and can be caused by various factors. Here are some suggestions for your reference:
Manually run the executable to execute the batch file so that we can check whether the command lines in the batch file are correct or not.
Check there are no duplicate/existing files in the destination folder.
Try to run the package in 32-bit or 64-bit runtime mode.
If the issue occurs when running a job, try to create a CmdExec type job step to call the excutable. If this job also fails, it might be an issue between executable and SQL Server Agent rather than the SSIS package itself.
If the issue persists, enable logging for the package, and check if we can obtain more detailed error message for further analysis.
Regards,
Mike Yin
TechNet Community Support

SFTP connection issue with Dreamweaver 2014

I have a very weird SFTP connection issue with Dreamweaver CC (2014). I am on a Mac running 10.9.4 and have no problem connecting to my server through SFTP with Dreamweaver CS 6. However, using the exact same settings on CC (2014), I get the following error: "An FTP error occurred - cannot make connection to host. Your login or password is incorrect. Please check your connection information".
I am truly at a loss here. Command line connection works without problems.
Any thoughts?

Hi there,
Try after rebooting your system or in a different user account on MAC.
Is there any limit with number of login sessions with your SFTP?
Could you check with Filezila or similar FTP client and connect to your site, see if you get any error there?
Thanks.

Installation Issues with Win XP

Hi, how are all of you? I am having installation issues with
Windows XP. Every time I double click the Adobe Air installer, it
says, "Installer encounters an error and need to be close"
I have tried on three different PC. All giving same error. I
downloaded the installer many time from adobe site but nothing
works.
Windows XP SP2
512MB RAM
Pentium IV 2.4 GHz Processor
Any suggestion or help will be greatly appreciated.
Thanks,
.:.WAHAB

Hello Tzeng, thank you for your reply. I could not get to the
log file you mentioned in your reply but here is file generated
when I get the error:
FILE LOCATION
F:\DOCUME~1\DUR-E-~1\LOCALS~1\Temp\c022_appcompat.txt
<?xml version="1.0" encoding="UTF-16"?>
<DATABASE>
<EXE NAME="Adobe AIR Installer.exe"
FILTER="GRABMI_FILTER_PRIVACY">
<MATCHING_FILE NAME="Adobe AIR Installer.exe"
SIZE="42304" CHECKSUM="0xAC3BF086" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR Installer" COMPANY_NAME="Adobe Systems
Inc." PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="setup.exe" INTERNAL_NAME="setup.exe"
LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x13891"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:35:52" UPTO_LINK_DATE="02/12/2009 19:35:52" />
<MATCHING_FILE NAME="AdobeAIRInstaller.exe"
SIZE="15739760" CHECKSUM="0xA9D06949" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR Installer" COMPANY_NAME="Adobe Systems
Inc." PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="Adobe AIR Installer.exe" INTERNAL_NAME="Adobe
AIR Installer.exe" LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems
Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0xF1128F"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:35:39" UPTO_LINK_DATE="02/12/2009 19:35:39" />
<MATCHING_FILE NAME="flashplayer_9_plugin_debug.exe"
SIZE="1786846" CHECKSUM="0x2FE8A8E1" BIN_FILE_VERSION="9.0.159.0"
BIN_PRODUCT_VERSION="9.0.159.0" PRODUCT_VERSION="9.0.159.0"
FILE_DESCRIPTION="Adobe® Flash® Player Plugin Installer"
COMPANY_NAME="Adobe Systems Incorporated" PRODUCT_NAME="Adobe®
Flash® Player Plugin" FILE_VERSION="1.0.20"
LEGAL_COPYRIGHT="Copyright © 1996-2009 Adobe Systems
Incorporated and its licensors. All Rights Reserved."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x18FD8B"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="9.0.159.0"
UPTO_BIN_PRODUCT_VERSION="9.0.159.0" LINK_DATE="01/13/2007
18:28:10" UPTO_LINK_DATE="01/13/2007 18:28:10"
VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="setup.msi" SIZE="30720"
CHECKSUM="0xF9521F1C" />
<MATCHING_FILE NAME="Adobe AIR\Versions\1.0\Adobe AIR
Application Installer.exe" SIZE="67392" CHECKSUM="0x78783101"
BIN_FILE_VERSION="1.5.1.8210" BIN_PRODUCT_VERSION="1.5.1.8210"
PRODUCT_VERSION="1.5.1" FILE_DESCRIPTION="Adobe AIR Application
Installer" COMPANY_NAME="Adobe Systems Inc." PRODUCT_NAME="Adobe
AIR 1.5.1" FILE_VERSION="1.5.1.8210" ORIGINAL_FILENAME="Adobe AIR
Application Installer.exe" INTERNAL_NAME="Adobe AIR Application
Installer.exe" LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x145F9"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:34:43" UPTO_LINK_DATE="02/12/2009 19:34:43" />
<MATCHING_FILE NAME="Adobe AIR\Versions\1.0\Adobe
AIR.dll" SIZE="7876928" CHECKSUM="0x7F6C1C4D"
BIN_FILE_VERSION="1.5.1.8210" BIN_PRODUCT_VERSION="1.5.1.8210"
PRODUCT_VERSION="1.5.1" FILE_DESCRIPTION="Adobe AIR"
COMPANY_NAME="Adobe Systems Inc." PRODUCT_NAME="Adobe AIR 1.5.1"
FILE_VERSION="1.5.1.8210" ORIGINAL_FILENAME="Adobe AIR.dll"
INTERNAL_NAME="Adobe AIR.dll" LEGAL_COPYRIGHT="Copyright 2009,
Adobe Systems Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0"
VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32"
PE_CHECKSUM="0x789021" LINKER_VERSION="0x0"
UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:33:38" UPTO_LINK_DATE="02/12/2009 19:33:38" />
<MATCHING_FILE NAME="Adobe CS3\Flash Professional\Adobe
CS3\Setup.exe" SIZE="2685104" CHECKSUM="0x7309F0C8"
BIN_FILE_VERSION="1.0.135.0" BIN_PRODUCT_VERSION="1.0.135.0"
PRODUCT_VERSION="1,0,135,0" FILE_DESCRIPTION="Adobe Setup"
COMPANY_NAME="Adobe Systems, Copyright 2005-2007"
PRODUCT_NAME="Adobe Setup" FILE_VERSION="1,0,135,0"
ORIGINAL_FILENAME="Setup.exe" INTERNAL_NAME="Setup.exe"
LEGAL_COPYRIGHT="Adobe Systems, Copyright 2005-2007. All rights
reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x298CDB"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.0.135.0"
UPTO_BIN_PRODUCT_VERSION="1.0.135.0" LINK_DATE="03/16/2007
23:30:15" UPTO_LINK_DATE="03/16/2007 23:30:15"
VER_LANGUAGE="English (United States) [0x409]" />
<MATCHING_FILE NAME="Adobe CS3\Flash Professional\Adobe
CS3\WinBootstrapper.msi" SIZE="1823744" CHECKSUM="0x88506662" />
</EXE>
<EXE NAME="Adobe AIR.dll"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="Adobe AIR.dll" SIZE="7876928"
CHECKSUM="0x7F6C1C4D" BIN_FILE_VERSION="1.5.1.8210"
BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
FILE_DESCRIPTION="Adobe AIR" COMPANY_NAME="Adobe Systems Inc."
PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
ORIGINAL_FILENAME="Adobe AIR.dll" INTERNAL_NAME="Adobe AIR.dll"
LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x789021"
LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
19:33:38" UPTO_LINK_DATE="02/12/2009 19:33:38" />
</EXE>
<EXE NAME="kernel32.dll"
FILTER="GRABMI_FILTER_THISFILEONLY">
<MATCHING_FILE NAME="kernel32.dll" SIZE="983552"
CHECKSUM="0x4CE79457" BIN_FILE_VERSION="5.1.2600.2180"
BIN_PRODUCT_VERSION="5.1.2600.2180" PRODUCT_VERSION="5.1.2600.2180"
FILE_DESCRIPTION="Windows NT BASE API Client DLL"
COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft®
Windows® Operating System" FILE_VERSION="5.1.2600.2180
(xpsp_sp2_rtm.040803-2158)" ORIGINAL_FILENAME="kernel32"
INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft
Corporation. All rights reserved." VERFILEDATEHI="0x0"
VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2"
MODULE_TYPE="WIN32" PE_CHECKSUM="0xFF848" LINKER_VERSION="0x50001"
UPTO_BIN_FILE_VERSION="5.1.2600.2180"
UPTO_BIN_PRODUCT_VERSION="5.1.2600.2180" LINK_DATE="08/04/2004
07:56:36" UPTO_LINK_DATE="08/04/2004 07:56:36"
VER_LANGUAGE="English (United States) [0x409]" />
</EXE>
</DATABASE>
Seems like an XML doc.
I tried by extracting all the file with WinRAR but nothing
worked
Please let me know if you need more information.
Thanks
.:.WAHAB

Installation Issue with Dreamweaver. (Error 1935, Exit code 7)

Similar Messages

Maybe you are looking for