Installation issues Adobe Pro X as a AAME package

Hi there,
We have some installation issues with a created Adobe Pro X package.
This is a new problem, the same package was installed 4 months ago on a similar system (Windows 7 enterprise edition x64) and even on a Windows Server 2008 (terminal server).
The symptoms of this problem are:
When starting the .msi (in the "build" directory) the installer starts and disappears after a couple of minutes without a warning or error. You can see in the task manager that the installation was going on but then it stops.
There is no new directory "Adobe Pro X" in the "C:\Program Files (x86)\Adobe" directory.
I tested this on a new installed "fresh" installation of the Windows environment.
Do you guys know what to do?
Thanks in advance!

Hi d.kieviet,
If the same package installed fine on another computer then we have to check the install logs to determine what might have gone wrong.
To collect the logs:
Please install Acrobat via following command line: msiexec /i AcroPRO.msi /L*v c:\logs\acrobat.log
make sure there is ‘logs’ folder created under C:/ drive
Regards,
Rave

Similar Messages

Disable install questions during remote installation of Adobe Pro 9

I am attempting to perform a remote installation of Adobe Pro 9 on various devices located at different sites. By using the Adobe Customization 9 I have configured the installation as I need. The one issue that I can not seem to find a resolution for is: how do I disable the installation questions popping up on the screen when I am conducting a silent installation? I'm assuming there is an option within the Direct Editor to perform this action. Where is it located?

Install rollback and Shared Technologies | Windows

Installation of Adobe Pro XI on desktop and laptop

We have Adobe Pro XI on our desktop (purchased in full 4/25/13) and we want to put a copy on our laptop. How do we do that?

If you have the disk and your laptop takes disks then use the disk to intsall it. You can also download the file(s) thru the page linked below and then install and activate using the serial number from your purchase.
Download Acrobat products | Standard, Pro | XI, X

Installation issues Adobe Air

trying to run an application that uses adobe air but comes up with a message sayin the installation of this application is damaged, try re-installing or contact the publisher for assisatance...i dont know if the problem is with the application im trying to run or adobe air...the application seems to work for others
can someone plz help me out
[2011-04-26:08:21:35] Runtime Installer begin with version 2.6.0.19140 on Windows Vista x86
[2011-04-26:08:21:35] Commandline is:
[2011-04-26:08:21:35] No installed runtime detected
[2011-04-26:08:21:39] Relaunching with elevation
[2011-04-26:08:21:39] Launching subprocess with commandline c:\users\xxxx\appdata\local\temp\air1d21.tmp\adobe air installer.exe -ei
[2011-04-26:08:21:39] Runtime Installer begin with version 2.6.0.19140 on Windows Vista x86
[2011-04-26:08:21:39] Commandline is: -stdio \\.\pipe\AIR_3260_0 -ei
[2011-04-26:08:21:39] No installed runtime detected
[2011-04-26:08:21:39] Starting silent runtime install. Installing runtime version 2.6.0.19140
[2011-04-26:08:21:39] Installing msi at c:\users\xxxx\appdata\local\temp\air1d21.tmp\setup.msi with guid {AFF7E080-1974-45BF-9310-10DE1A1F5ED0}
[2011-04-26:08:21:41] Runtime Installer end with exit code 0
[2011-04-26:08:21:41] Elevated install completed
[2011-04-26:08:21:47] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2011-04-26:08:21:47] Runtime Installer end with exit code 0
[2011-04-26:08:21:48] Runtime Installer begin with version 2.6.0.19140 on Windows Vista x86
[2011-04-26:08:21:48] Commandline is: -installupdatecheck
[2011-04-26:08:21:48] Installed runtime (2.6.0.19140) located at c:\Program Files\Common Files\Adobe AIR
[2011-04-26:08:21:48] Performing pingback request
[2011-04-26:08:21:49] Pingback request completed with HTTP status 200
[2011-04-26:08:21:49] Starting runtime background update check
[2011-04-26:08:21:49] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows6.0/x86/patch/2.6.0.19140/update
[2011-04-26:08:21:49] Unpackaging http://airdownload.adobe.com/air/3/background/windows6.0/x86/patch/2.6.0.19140/update to C:\Users\xxxx\AppData\Roaming\Adobe\AIR\Updater\Background
[2011-04-26:08:21:49] Runtime update not available
[2011-04-26:08:21:49] Unpackaging cancelled
[2011-04-26:08:21:49] Runtime Installer end with exit code 0

Hi,
It appears that your log looks ok. Could you try uninstalling your application, verifying that the folder was removed from Program Files, then reinstalling?
Thanks,
Chris

Typical or full installation differences for adobe pro x...

What is the difference between the typical and full installation for adobe pro X?

Hi raybhm,
Please refer the link: http://answers.acrobatusers.com/Complete-version-typical-version-q38971.aspx .
Regards,
Romit SInha

Need download installer for adobe acrobat 9 for mac

How do I find the installer for Adobe Pro 9 for a mac?

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Adobe Pro affecting Outlook printing

I recently installed Adobe Professional on a user's computer. This user needs to print all attachments in any multiple attachment Outlook email. Since installation of Adobe Pro, only one attachment prints when she tries to print all email attachments. How can I resolve this?

What happens when you try to open a different attachment and try to print? Outlook (what version on what OS). Any error messages?

I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

Hi Stacy ,
Please refer to the following link to get details and solutions about Adobe Download Assistant .Please see if that fixes the issue.
https://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
Regards
Sukrit Dhingra

Adobe Pro 9 Installation Replaces Windows Fonts

I could use some help with a font issue. We have an internally developed application that uses the Lucida Sans Regular font that's supplied with Windows. The font information lists it as version 1.67 and it's 64K in size. When we installed Adobe Pro 9, the Lucida Sans Regular font and several other Lucida fonts were removed from C:\Windows\Fonts. They were replaced with shortcuts to new Lucinda fonts in the D:\program files\adobe\Acrobat 9.0\Designer 8.2\jre\lib\fonts folder. The new Lucida fonts in the Acrobat fonts directory are a different version and different size. The new fonts installed by Adobe Pro are 682K in size and listed as version 1.20. Our internally developed app isn't working well with the Adobe installed fonts. The fonts no longer display correctly in our app, the window sizes have changed slightly and some buttons have shifted position and no longer work. If we revert back to the old, Windows supplied fonts, the app works normally. Our app is built off .Net 3.5.
Is there a reason the Adobe Pro 9 installation replaces the Windows fonts? Is there a place to review the differences between the fonts? They are both caleld Lucida Sans Regular.
I'd appreciate any insights.
Thanks.

check out the adobe customization wizard at http://www.adobe.com/support/downloads/detail.jsp?ftpID=3993
Enterprise Deployment: http://www.adobe.com/devnet/acrobat/enterprise_deployment.html
regards,
nik

Adobe Pro X silent install issue SCCM - Error Code 1602

Hi guys,
I've looked through some of the forums but was wondering if you could help out with an issue I'm having with Adobe Pro X silents installs on Windows 7 64bit machines though SCCM.
I have tested the install on my machine and its works fine so I know the packages are ok for both Adobe Pro and also the Design Standard package I created using the Deployment Tools. Although I did uninstall Adobe Pro 9 on my machine before running the package. Adobe Pro when run manually asked for Outlook and Internet Explorer to be closed down before it would install, but on the silent install it just fails. Is there any way to get round this issue?
The error message in SCCM on the machine in question in SCCM is
The program for advertisement "NWK20030" failed ("NWK00011" - "Adobe_Pro_X"). A failure exit code of 1602 was returned.
User context: NT AUTHORITY\SYSTEM
Possible cause: Systems Management Server (SMS) determines status for each program it executes. If SMS cannot find or correlate any installation status Management Information Format (MIF) files for the program, it uses the program's exit code to determine status. An exit code of 1602 is considered a failure.
Solution: For more information on the exit code, refer to the documentation for the program you are distributing.
The packages is rolled out to the users rather that the machines and we ideally need to keep it this way due to the set up we have. On the machine it hasnt been installed and just comes up with the 1602 error message. I will try some other machines / user accounts but I believe the same issues will come up.
Is there anything I could try to resolve this issue? I have tried a great deal of things but maybe I need a fresh mind and its a little fried!!
Thanks for your help in advance peeps...
Lara

Is this an MSI error or Acrobat error? Post a log.
Also, Per-user installs are not supported.
http://support.adminarsenal.com/entries/20468378-Error-1602-from-Adobe-causes-confusion-wi th-Windows-Installer-1602-originally-titled-How-does-a-user

I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

I need help with deactivation.
I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Adobe PDF Preview Handler Issue in WIndows 8 64 Bit Machine - After installing Adobe Pro 11.0.10

Hi Guys ,
We are facing a serious issue with Windows 8 and Adobe PDF Preview Handler . We are using the PDFPrevHndlr.dll from Adobe to show PDF Previews in our application. It is working fine in Windows 7 and Vista and for some reason it is not working in Windows 8.1 64 bit machines after upgrading to Adobe Pro 10.0.10 . Please help us figure out what is the root cause of this issue .
During a close analysis we have found that the PrevHost.exe( Windows component ) is failing soon after it is being invoked . Any help in this is much appreciated.
Regards
Sree

Hi Sree,
According to your description, your case related to Adobe PDF Preview Handler. This is third-party product. I am afraid this is out of our support. Please ask in their special forum
https://forums.adobe.com/community/adobe_reader_forums
By the way, after do some search, it seems not working for 64bit machine,
>> It is working fine in Windows 7 and Vista
Also work fine in win7/vista 64bit????
If your scenario is not working in 64bit machine, try to put "adobe pdf preview handler 64-bit fix" in search engine. Good luck.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

Hi Kashmore,
Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
Cheers,
Kartikay Sharma

I have an installation CD Adobe Acrobat 9 Pro with teh Serial No/key. Now I bought a tablet that has now CD drive. So I tried to download the Acrobat 9 Pro from the Adobe hoempage, but failed. I can only find the link to something like an extended version

I have an installation CD Adobe Acrobat 9 Pro with teh Serial No/key. Now I bought a tablet that has now CD drive. So I tried to download the Acrobat 9 Pro from the Adobe hoempage, but failed. I can only find the link to something like an extended version. So how do I have to proceed , where can I find the proper link. My system has W 8.1 32 Bit.

Try the download below...
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Form issues in Adobe Pro for Macs

Can someone tell me how to solve an issue regarding Adobe Pro 9 for Macs? I have developed forms in Adobe Pro 9 but they can not be viewed in Adobe but can be viewed in Preview. How can this issue be corrected?

This is interesting, because I've had the same thing happen to forms I've created. In a most recent example, the form was filled out by an external person (someone outside our agency) and returned. When I opened the file, on my Mac, i could see the data entered into the fields. When a co-worker opened the file, on a PC, she didn't see anything and mistakenly thought the form was blank. However you could click into the field and then see that data had indeed been entered into each field.
I opened the file to see if there was something wrong with the appearance properties -- making sure that text color was not blank, and also making sure that I hadn't selected an obscure font. The text color was black and the font was Helvetica. On a whim I changed the font to Times and all of a sudden the data in each field was viewable. However, i changed it back to Helvetica and it remained viewable. So, the act of changing the font made the data fields display; it didn't matter what font I chose. I just had to change it.
When I looked up file properties, i did notice that the PDF Producer is Mac OS X 10.6.7 Quartz PDFContext, and so does that mean it was opened and fields filled in using Preview?

Installation issues Adobe Pro X as a AAME package

Similar Messages

Maybe you are looking for