Installation log file error
I am attempting to reload Photoshop Elements 8 on a Dell Precision Workstation under Windows 7 64-bit Professional on a new hard drive. Immediately after I confirm English as the language, the following error pops up:
Error opening installation log file. Verify that the specified log file location exists and is writable.
I have attempted installation from the DVD and from a location on the hard drive, with the same result.
If I knew the location the installer is trying to use for the log file I could verify the existence and properties of that location.
Please help.
Thanks,
warleftd5
Try working through these troubleshooting tips to see if you can isolate the problem.
http://kb2.adobe.com/cps/515/cpsid_51562.html
Similar Messages
-
Error opening installation log file.
ProblemYou are unable to install BlackBerry Desktop Manager and the following error message is displayed when you open the installation log file:
Error opening installation log file verify that the specified log file exist and is writable.
ResolutionTo resolve this issue, edit the system environment variables by completing the following steps:
Warning: The following procedure requires modifying the computer environment variables. This can result in unexpected system behavior. Document the existing values prior to implementing any changes. To search for the Install.log file or files in the temp folder:
On the Start menu, click Run and type %temp%.
Click OK.
In the Temp folder, click Search and then All files and folders. In the All or part of the file name field, type Install.log and set the Look in field value to Temp.
Click Search.
If the Install.log file is found, delete it.
In Windows® Explorer, go to the C:\ drive and create a new folder called TEMP2.
Open the Control Panel and double-click the System icon.
On the Advanced tab, click Environment Variables.
In the User variables list, select TEMP and click Edit.
In the Variable value field, change the file path to C:\TEMP2 and click OK.
In the User variables list, select TMP and click Edit.
In the Variable value field, change the file path to C:\TEMP2 and click OK.
In the Environment Variables window, click OK.
In the System Properties window, click Apply and then OK.
Restart the computer for the changes to take effect.
Repeat the installation procedure for BlackBerry Desktop Manager.
I have 8330hello,
another solution is here :
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
"Error opening installation log file" when installing Photoshop Elements 10
I bought Photoshop Elements 10 , Premiere Elements 10 .... I got the Premiere to download no problem but i can't get the photoshop to download. This is the msg that I am getting when I try to dl it "Error opening installation log file. Verify that the specified log file location exsists and is writable". Not sure why I can download one and not the other since they are both on the same disc. Plus in the program that I purchased I has 5 DVD's. Any suggestions??
Thanks
Message title was edited by: Brett NInstall Premiere Elements, Photoshop Elements
Mylenium -
TRYING TO INSTALL adobe photoshop elements8 AND IM GETTING error opening installation log file. verify that the specified location exists and is writable
Error opening installation log file | Windows
-
SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.
Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com -
Log File Error when open MDS_Log from MDM Console
Hi Experts,
I am facing a problem when I tried to open MDS_Log file from MDM Console. The error message was showing as below:
Log File Error
Problems in the log file prevent Console from displaying its contents. To view log contents, open the log file in a seperate text editor.
Could any of you advise me how to open the log in a seperate text editor from MDM console ?
Thanks very much in advance
Regards,
Wei DonaHi ,
Just right click on record pane of log node and select save .it will sav to user defined location in .csv format.
Please try at yr end.
Thanks,
Sudhanshu -
(Forte-users) log file error
Hi,
We are getting this error in our log files, when we run our application.(We
are running interpreted)
Any help will be appreciated to solve this problem.
Thanks
Carole
Attached to manager for node FORTE_DEV.
aud Wed May 10 08:58:28 : Loading partition CSaver_cl169_Part1-router built
on 08-May-2000 16:32:42.
Attached to manager for node FORTE_DEV.
aud Wed May 10 10:01:12 : Shutting down partition as requested.
aud Wed May 10 10:01:13 : Unloaded partition CSaver_cl169_Part1-router.
aud Wed May 10 10:01:15 : Loading partition CSaver_cl169_Part1-router built
on 08-May-2000 16:32:42.
Attached to manager for node FORTE_DEV.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
SYSTEM ERROR: Failed to connect or lost connection to the environment
manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
installed at that location. If it is, then check to be sure that there
are
enough system resources available to support this partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed May 10 10:01:40
Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
=
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
SYSTEM ERROR: Attempt to send from a partition
(A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1) that no longer
exists.
Class: qqsp_DistAccessException
Error #: [601, 111]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Wed May 10 10:01:40
Distributed method called: qqdo_NsServerProxy.FindObject (object
name
Unnamed) from partition "CSaver_cl169_Part1-router", (partitionId
=
A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId =
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev
Exception occurred (locally) on partition
"CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1,
taskId
= [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
SYSTEM ERROR: Failed to connect or lost connection to the environment
manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
installed at that location. If it is, then check to be sure that there
are
enough system resources available to support this partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed May 10 10:01:40
Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
=
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
WARNING:
Any unauthorised use or interception of this email is illegal. If this email
is not intended for you, you may not copy, distribute nor disclose the
contents to anyone. Save for bona fide company matters, the BoE Group does
not accept any responsibility for the opinions expressed in this email.
For further details please see: http://www.nbs.co.za/emaildisclaim.htmOne thing to look at is this message: Check that the environment manager is
installed at that location. If it is, then check to be sure that there are
enough system resources available to support this partition.
Particularly the enough systems resources part of it. I've seen this message
before, but it's been awhile, & the problem was we didn't have enough
virtual memory on the server & also we needed more tcp/ip connections. If I
remember right our Unix guy had to change some of the configuration
parameters in the kernel on the server.
Hope this helps.
-----Original Message-----
From: MacDonald, Carole [mailto:CMacDonaldnbs.co.za]
Sent: Thursday, May 11, 2000 3:53 AM
To: forte-userslists.xpedior.com
Subject: (Forte-users) log file error
Hi,
We are getting this error in our log files, when we run our application.(We
are running interpreted)
Any help will be appreciated to solve this problem.
Thanks
Carole
Attached to manager for node FORTE_DEV.
aud Wed May 10 08:58:28 : Loading partition CSaver_cl169_Part1-router built
on 08-May-2000 16:32:42.
Attached to manager for node FORTE_DEV.
aud Wed May 10 10:01:12 : Shutting down partition as requested.
aud Wed May 10 10:01:13 : Unloaded partition CSaver_cl169_Part1-router.
aud Wed May 10 10:01:15 : Loading partition CSaver_cl169_Part1-router built
on 08-May-2000 16:32:42.
Attached to manager for node FORTE_DEV.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
SYSTEM ERROR: Failed to connect or lost connection to the environment
manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
installed at that location. If it is, then check to be sure that there
are
enough system resources available to support this partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed May 10 10:01:40
Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
=
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
SYSTEM ERROR: Attempt to send from a partition
(A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1) that no longer
exists.
Class: qqsp_DistAccessException
Error #: [601, 111]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Wed May 10 10:01:40
Distributed method called: qqdo_NsServerProxy.FindObject (object
name
Unnamed) from partition "CSaver_cl169_Part1-router", (partitionId
=
A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId =
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev
Exception occurred (locally) on partition
"CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1,
taskId
= [A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
LbRouter::FindMembers - CAUGHT EXCEPTION attaching members from
SYSTEM ERROR: Failed to connect or lost connection to the environment
manager
at FORTE_NS_ADDRESS = <Unknown>. Check that the environment manager is
installed at that location. If it is, then check to be sure that there
are
enough system resources available to support this partition.
Class: qqsp_SystemResourceException
Error #: [601, 201]
Detected at: qqdo_NsClient::FindObject at 1
Error Time: Wed May 10 10:01:40
Exception occurred (locally) on partition "CSaver_cl169_Part1-router",
(partitionId = A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696:0x1, taskId
=
[A37D7E70-0024-11D3-9C6C-522EAE7DAA77:0xa696.9]) in application
"CSaver_cl169", pid 698 on node FORTE_DEV in environment nbs_dev.
WARNING:
Any unauthorised use or interception of this email is illegal. If this email
is not intended for you, you may not copy, distribute nor disclose the
contents to anyone. Save for bona fide company matters, the BoE Group does
not accept any responsibility for the opinions expressed in this email.
For further details please see: http://www.nbs.co.za/emaildisclaim.htm
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
when i installed office, it seemed that an installer log file was created on the HD. i dragged it somewhere else, but later when i installed other programs (keyserver, acrobat, etc) other installer log files were again created on the HD. I got tried of dragging all these away, so i combined the files together and put them back onto HD. but why is the text file automatically changed into a unix executable file now? is it alright? and will other installer log files just add onto it later?
MacBook Mac OS X (10.4.8)You can delete them or put them into either /username/Library/Logs/ or /Library/Logs/. They're not essential unless you have installation issues and want to provide the data to the developer whose SW you installed.
-
WebLogic Installation Log File
Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation log file should
go? Where is it anyway?
I searched few directories do not see where it placed the installation lo file.No, not as I know of. If you are experiencing some problems and you really want to
find more information about a problematic installation, you may do the following to
generate the debug output and you can send that debug info to me:
Windows: pressing down control key at the beginning of the installation until a
debug console window pops up.
Unix Installer ( .bin files): set LAXDEBUG=true in your environment before starting
your installation. tee or script the output to a file:
export LAXDEBUG=true
sh weblogic610.bin -i console 2>&1 | tee buildlog
Pure java installer (.zip file):
touch ia_debug
$JAVA_HOME/java -cp weblogic610.zip -i console 2>&1 | tee buildlog
The upgrade installer should have a clear log to tell you what went wrong in a
installation or uninstallation process. And the installation/uninstallation process
would be rolled back if anything went wrong. The exception is that if you manually
stoped it in some way, which way may catch and process later.
-Dan
Ashique wrote:
Yes, I am trying to do a full installation (in silent mode).
Every software has an installation log. Is that not pretty much standard?
How come weblogic does not have log? If something goes wrong during silent
installation, I would like to see a log file.
Are you sure that there is absolutely no log file for a full installation?
Dan Bai <[email protected]> wrote:
There is no log file for a full installer installation.
The log file for an servicepack upgrade installation lives under $BEA_HOME/logs.
Look into the directory corresponding to that servicepack.
Are you experiencing any problems with the full installer?
-Dan
Ashique wrote:
Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation logfile should
go? Where is it anyway?
I searched few directories do not see where it placed the installationlo file. -
Exchange 2013 Window Backup failure - fails to clean up log files - error FFFFFFFC
Hello,
We currently have an Exchange 2013 - Exchange 2007 coexistence setup.
1x Windows Server 2008 R2 with Exchange 2007 CAS/HUB
1x Windows Server 2008 R2 with Exchange 2007 MBX
1x Windows Server 2008 R2 with Exchange 2013 CU 3 (all roles)
Since our current backup solution (Symantec Backup Exec 2010 R3) does not support backing up Exchange 2013 CU3 databases, we are using the builtin Windows Backup feature to backup the Exchange 2013 CU3 databases.
This has functioned for a while, until all of a sudden, the log files are not cleared anymore, causing our log disk to fill up.
Our Exchange 2013 server looks like this:
C: Windows + Exchange installation
D: Databases
E: Database Log Files
F: Archive Databases
G: Archive Database Log Files
S: Dedicated backup volume
The backup is scheduled to run every day at 21:00 hours, performing a full VSS backup of D:,E:,F: and G: to the volume S:
Windows backup log says the backup completed with exceptions, leaving the Exchange logs untouched and filling the drive.
The Windows Backup Command Line tools are NOT installed since they are not compatible with Exchange 2013.
In the eventvwr we can see the following error:
The Microsoft Exchange Replication service VSS Writer (Instance a33ec440-7f12-4c50-806b-1bc5ceaf8aad) failed with error FFFFFFFC when processing the backup completion event.
The command VSSADMIN LIST WRITERS displays the following:
Writer name: 'Microsoft Exchange Writer'
Writer Id: {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}
Writer Instance Id: {cf84a907-76dc-428c-90e0-c18a3f9db493}
State: [1] Stable
Last error: Retryable error
Restarting the Microsoft Exchange Replication (MSExchangeRepl) clears the writer error, same with a reboot, however the error comes backup after the next backup.
Any thoughts on how to resolve this issue?
Thanks.Hello,
Here is a blog for your reference.
http://blogs.technet.com/b/timmcmic/archive/2012/03/11/exchange-and-vss-my-exchange-writer-is-in-a-failed-retryable-state.aspx
If there is any useful information after you change the logging to expert, please free let me know.
Cara Chen
TechNet Community Support -
Deployment Utility - log file errors/warnings not clear
Hi,
I'm doing my first deployment and have few questions:
1) I tried to deploy ONLY the TS user directories. I checked the 'Deploy Files in TestStand User Directories' option and did not check 'Install TestStand Engine' since I deploy it into a system with TS3.0+CVI7.0 software(same as the source).
The process was successful by I get the following warnings in the log file.
Starting Log.
Building...
5:47 PM
An installer is being created.
The installer is finished
The build process is done.
5:48 PM
Warning: You may need to add any sequence files referenced by the following expressions:
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"reportgen_" + RunState.Root.Locals.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Single Pass', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\Program Files\National Instruments\TestStand 3.0\Components\User\Models\TELRAD_SequentialModel.seq'
+++++++++++++++++++++++++++++++++++++++
What does it mean? What to do about it?
2) The utility does not include the cfg/TypePalettes where I have a my own file.
Is there a reason to it? Do I need to include it manually?
3) When I included workspace in the utility I get the following errors:
Starting Log.
Processing Workspace...
Done processing workspace file
+++++++++++++++++++++++++++++++++++++++
Processing Workspace...
Done processing workspace file
Building...
6:08 PM
Error could not open LabVIEW
Distributing VIs requires the LabVIEW Development System
Class not registered
in TestStand - Get LV Reference.vi->TestStand - Package VIs.vi->TestStand - Build.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
An installer was not created due to an error
The build process is done.
6:08 PM
Error Code:-2147221164
Class not registered
in TestStand - Get LV Reference.vi->TestStand - Package VIs.vi->TestStand - Build.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
+++++++++++++++++++++++++++++++++++++++
In order to eliminate the problem source I un-checked the files presented by the 'Analyze Source Files' until all of them are un-checked. Even in that case I get the error message.
What does the message mean?
What to do about it?
I don't use any LV in my system!!!!!
Thanks and my apology for the long message
RafiHi Rafi,
On #1 the warnings appear whenever you have an expression that specifies a sequence file because many expressions are not valid until runtime, you can ignore it as long as ALL sequences that expression may evaluate to are included in the Workspace.
>2) The utility does not include the cfg/TypePalettes where I have a my own file.
>Is there a reason to it? Do I need to include it manually?
No it does not include it because it is not needed unless you plan to edit on the deployed sequence (generally not recommended). If you add a custom type to a sequence the sequence file will have a copy of the type. You can include the types palettes manually in the workspace if desired.
>3) When I included workspace in the utility I get the following errors:
>What does the message mean?
The deployment utility thinks you have a VI to deploy, it is trying to load LabVIEW and failing because LabVIEW is not installed.
>What to do about it? I don't use any LV in my system!!!!!
Somewhere there is a .vi or .llb in the system. Find the VI(s) and uncheck them. I did find a bug that the deployment utility caches the flag indicating if a VI is present, but it is easily worked around: Save a tsd file, Press the New button and then reload the tsd.
-Rick Francis -
Can't DPV, log file error
I keep getting:
Err no - 7091, DPV and LACSLink Required Parameter. THe Log File Directory must be writable when either DPV or LACSLink is enabled.
I am running Windows 7 64-bit. Initially at install the auto updates didn't work. I got that fixed but now I get this.
Has anyone run into this issue before? I set security on all postalsoft folders to allow all for all groups. I don't think SAP supports windows 7 yet.Alex,
This information can be found in our knowledge base...
Install the most current version of software again with Full Administrator Rights and make sure there are full read and write permissions to the C:\Postalsoft installation directory.
OR
Open Windows Explorer and go to C:\Postalsoft. Create a new directory "folder" under Postalsoft called ACE. Then create a new folder under ACE called Log. The path would be C:\Postalsoft\ACE\Log.
The directory tree would then look like this:
+ Local Disk (C):
+ Postalsoft
+ ACE
+ Log
If your Postalsoft program is installed elsewhere, make sure you create this ACE\Log path under Postalsoft.
For future reference you may want to check the knowledge base first... hopefully this will save you some time and trouble. To get to the knowledge base go to https://service.sap.com/bosap-support - click on the link that says "Search the knowledge base of known issues: SAP Notes". Then you can type in the error or phrase you are looking for information on.
Hope this helps!
Thanks,
Kendra -
Can't open Flash Builder - "See the log file" error.
I have been using Flash Builder 4.5 and for some reason it has stopped opening correctly - I get the following error then it just shuts down.... :
"An error has occured. See the log file."
and if i check the log file it refers to then i see the following text:
!SESSION 2011-06-22 13:53:43.658 -----------------------------------------------
eclipse.buildId=M20100909-0800
java.version=1.6.0_16
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.osgi 4 0 2011-06-22 13:53:59.598
!MESSAGE Application error
!STACK 1
org.eclipse.swt.SWTError: No more handles
at org.eclipse.swt.SWT.error(SWT.java:4109)
at org.eclipse.swt.SWT.error(SWT.java:3998)
at org.eclipse.swt.SWT.error(SWT.java:3969)
at org.eclipse.swt.widgets.Widget.error(Widget.java:468)
at org.eclipse.swt.widgets.Control.createHandle(Control.java:633)
at org.eclipse.swt.widgets.Composite.createHandle(Composite.java:305)
at org.eclipse.swt.widgets.Control.createWidget(Control.java:649)
at org.eclipse.swt.widgets.Scrollable.createWidget(Scrollable.java:134)
at org.eclipse.swt.widgets.Control.<init>(Control.java:110)
at org.eclipse.swt.widgets.Scrollable.<init>(Scrollable.java:75)
at org.eclipse.swt.widgets.Composite.<init>(Composite.java:95)
at org.eclipse.ui.splash.BasicSplashHandler.getBundleProgressMonitor(BasicSplashHandler.java :159)
at org.eclipse.ui.splash.BasicSplashHandler.getContent(BasicSplashHandler.java:265)
at org.eclipse.ui.internal.splash.EclipseSplashHandler.init(EclipseSplashHandler.java:86)
at org.eclipse.ui.internal.Workbench$8.run(Workbench.java:782)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.ui.internal.Workbench.createSplashWrapper(Workbench.java:798)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2467)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start(FlashBuilderApplication.ja va:108)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:619)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:574)
at org.eclipse.equinox.launcher.Main.run(Main.java:1407)
This is incredably frustrating as you can imagine as it effectively means i cant work anymore, it is clearly some kind of problem with eclipse but i have no idea what.
I have tried re-installing Flash Builder twice and no luck.
Can anyone help with this???
Thanks !!!!
Elliot.There is a similar thread with exact same stackstrace and problmes reported with earlier verison of FB. You can check it here http://forums.adobe.com/thread/832073. Thre is also representation of Adobe engineers on this thread. Aprarenlty there are certain updates(Eclipse / java) that FB doen't encourage, post FB is installed in stanadlone mode and workarounds are suggested on this thread to overcome this problem. If you are workign in plugin environment with FB, I guess updates are not affecting FB installtion. Please try out the solutions presented on this thread and let us know.
-
Log File Error - Is this my Responsibility?
Hi server admin people,
I'm a customer who is trying to kill an application hosted by
my ISP. I've removed and deleted all related directories and files
on my ISP's server and told them I don't need ColdFusion support
anymore. However, they want to continue charging me because their
server is getting bogged down by calls to a cfm page that no longer
exists. The error log file is below. I don't know how to fix the
problem. Should I have to? I guess my expectation would be that
this is some attack my ISP should know how to handle. Greatly
appreciate anyone taking the time to look and advise. Here are the
repeating lines in the server's log file my ISP provided me with:
"Error","jrpp-611","12/24/08","19:32:35",,"File not found:
/Intranet/processaskquestion.cfm The specific sequence of files
included or processed is:
F:\InetPub\Webhost\Testing\Intranet\processaskquestion.cfm "
coldfusion.runtime.TemplateNotFoundException: File not found:
/Intranet/processaskquestion.cfm
at coldfusion.filter.PathFilter.invoke(PathFilter.java:77)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:47)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:35)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:43)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:252)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:192)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:348)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:294)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Sincerely, Paul.If you make *any* request for *any* ColdFusion file {.cfm,
.cfc, .cfr,
etc} on *any* web site on a web server configured with
ColdFusion, you
will get a ColdFusion error by default.
The default behavior is for the Web Server to handle in such
request to
ColdFusion if the file exists or not. There are settings that
can
change this, but that can turn of some of ColdFusion's
functionality.
So, yes I think this is the ISP's issue. -
Database not starting,REDO log file error?
My DB was working fine uptill last evening, when i restarted it for some DB task it showed me an error ..
ORA-00333: redo log read error block 57346 count 8192
I studied the alert log file & related trace file .... but could not conclude what to do ?? Can any one suggest me what could be the solution...
ORACLE 10g R2
Windows 2003 Server
Database in NOARCHIVELOG mode.
I don't have the recent backup.The one i have is 20 days old.
Alert Log file contents : -
Wed Jun 02 20:22:19 2010
Aborting crash recovery due to error 333
Wed Jun 02 20:22:19 2010
Errors in file e:\oracle\product\10.2.0\admin\ora10g\udump\ora10g_ora_140.trc:
ORA-00333: redo log read error block 57346 count 8192
ORA-333 signalled during: ALTER DATABASE OPEN...
Wed Jun 02 20:37:15 2010
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Wed Jun 02 20:43:53 2010
Shutting down instance: further logons disabled
Wed Jun 02 20:43:53 2010
Stopping background process CJQ0
Wed Jun 02 20:43:54 2010
Stopping background process MMNL
Wed Jun 02 20:43:55 2010
Stopping background process MMON
Wed Jun 02 20:43:56 2010
Shutting down instance (immediate)
License high water mark = 3
Wed Jun 02 20:43:56 2010
Stopping Job queue slave processes
Wed Jun 02 20:43:56 2010
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Wed Jun 02 20:43:58 2010
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Wed Jun 02 20:43:58 2010
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Trace file to read ora10g_ora_140.trc:-
Dump file e:\oracle\product\10.2.0\admin\ora10g\udump\ora10g_ora_140.trc
Wed Jun 02 20:22:18 2010
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 2 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:3527M/4094M, Ph+PgF:4386M/5973M, VA:800M/2047M
Instance name: ora10g
Redo thread mounted by this instance: 1
Oracle process number: 15
Windows thread id: 140, image: ORACLE.EXE (SHAD)
*** SERVICE NAME:() 2010-06-02 20:22:18.406
*** SESSION ID:(159.3) 2010-06-02 20:22:18.406
Successfully allocated 2 recovery slaves
Using 545 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 14261, block 2, scn 86974094
cache-low rba: logseq 14260, block 4023
on-disk rba: logseq 14262, block 3758, scn 86978396
start recovery at logseq 14261, block 2, scn 86974094
ORA-00333: redo log read error block 57346 count 8192
ORA-00312: online log 2 thread 1: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORA10G\REDO02.LOG'
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00333: redo log read error block 57346 count 8192
ORA-00312: online log 2 thread 1: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORA10G\REDO02.LOG'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00333: redo log read error block 57346 count 8192
*** 2010-06-02 20:43:58.812
*** 2010-06-02 20:43:58.812 60680 kcrr.c
ARCH: Archival disabled due to shutdown: 1089
*** 2010-06-02 20:43:59.812 60680 kcrr.c
ARCH: Archival disabled due to shutdown: 1089Hi,Aman this(following) may is not good way for opening database,but OP can try and open own database:
@ DBA4 you will see from following example how you can open your database.In your online log files was corrupted,therefore you have to do following step by step then you database will open.
SQL> alter database clear unarchived logfile group 2;
alter database clear unarchived logfile group 2
ERROR at line 1:
ORA-01624: log 2 needed for crash recovery of instance p (thread 1)
ORA-00312: online log 2 thread 1:
'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO02.LOG'
SQL> alter database backup controlfile to trace as 'D:\oracle\product\10.2.0\ora
data\P\c.txt';
Database altered.
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 125829120 bytes
Fixed Size 1288100 bytes
Variable Size 75499612 bytes
Database Buffers 41943040 bytes
Redo Buffers 7098368 bytes
SQL> CREATE CONTROLFILE REUSE DATABASE "P" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO01.LOG' SIZE 50M,
9 GROUP 2 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO02.LOG' SIZE 50M,
10 GROUP 3 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\REDO03.LOG' SIZE 50M
11 DATAFILE
12 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF',
13 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\UNDOTBS01.DBF',
14 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSAUX01.DBF',
15 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\USERS01.DBF',
16 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TS_TEST.ORA',
17 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TEST.ORA',
18 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\TEST1.ORA'
19 CHARACTER SET WE8MSWIN1252;
Control file created.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 2032832 generated at 06/03/2010 12:42:29 needed for thread 1
ORA-00289: suggestion :
D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\P\ARCHIVELOG\2010_06_03\O1_MF_1_87_
%U_.ARC
ORA-00280: change 2032832 for thread 1 is in sequence #87
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
ORA-01112: media recovery not started
then add *_allow_resetlogs_corruption=true* in pfile then startup database with pfile as
SQL> startup mount pfile=D:\oracle\product\10.2.0\admin\P\pfile\init.ora.pr
ORACLE instance started.
Total System Global Area 125829120 bytes
Fixed Size 1288100 bytes
Variable Size 62916700 bytes
Database Buffers 54525952 bytes
Redo Buffers 7098368 bytes
Database mounted.
SQL> recover;
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 2032832 generated at 06/03/2010 12:42:29 needed for thread 1
ORA-00289: suggestion :
D:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\P\ARCHIVELOG\2010_06_03\O1_MF_1_87_
%U_.ARC
ORA-00280: change 2032832 for thread 1 is in sequence #87
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
cancel
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'D:\ORACLE\PRODUCT\10.2.0\ORADATA\P\SYSTEM01.DBF'
ORA-01112: media recovery not started
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
Database altered.
SQL>finally remove allowresetlogs_corruption=true parameter from pfile.
Maybe you are looking for
-
DBMS_LOB.CONVERTTOBLOB invalid LOB locator specified: ORA-22275
Hi all, the following code has been working great on 11g (and apex.oracle.com) now when I try to use this function under 10g XE I get following error : ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275 ORA-06512: at
-
Looking to install patch 11.1.1.2.22 to correct bug 9480056
My client is looking to install this patch to address an issue with substitution variables not displaying in the Studio report writer. There is an issue when a substitution variable is set to a member that reuires " i.e. "Forecast One". This client h
-
I have this Java program, in command line, i want to print a hard copy of the output, is it possible?
-
CS3 Upgrade demands two qualifying products?
I'm installing CS3 for a co-worker, it worked on their old computer I just replaced. We have a copy of CS2 Premium and the CS3 upgrade. At the upgrade check, it asks for a serial from either CS2 or CS2.3. I put in the CS2 serial, it validates it, th
-
Easy Question did/does the free SDK 3 have/had AVDG
Did the free SDK 3 have the AdvancedDataGrid component? I'm on a contract project that is not using the production version of the SDK ( its a startup trying to get funding ). They are using SDK 3 and I want to use the ADVDG the but its not there. I k