Installation not complete

I am trying to install Solaris 10 on AMD XP processor.
My problem is the installation is not complete. Means, after booting from CD 1 everthing works well, installation program reboots and after rebooting prompts for CD 2. First time it was thorough with CD 2 and in CD 3 after finishing 36% the system hangs. I had to switch of the machine. After rebooting, it prompts for CD 3 again, I say SKIP., then it goes for CD 4 but again it hangs after 55 % of CD 4.
I just don't understand why this happens. I had allocated about 30 GB for solaris partition. I have 1GB RAM.
Kiran

Thanks for letting me know Hkitty .
I don't believe it would be a issue with the PDF, since you can't print from Word either.
You can always restore your computer back to a earlier time when everything was working properly.
System Restore for Windows 7.
Here are a couple more things you can check first, if you like.
Print a configuration page to get the printer's IPv4 address.
Printing a Configuration Report.
If you have a valid IP address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Check the port assigned to the printer on the computer.
Go to Start, Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
It should be checked on TCP/IP.
Then click on Configure Port to view the IP address.
If the IP address doesn't match the printer's IPv4, then create a new port with the new IPv4 address.
Close the configure port window.
Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
Type in the proper IP address for the printer.
Make sure the printer is online.
Try printing again.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Installation not completed - error at step# 10

I was not able to get past step #10 to establish a passcode because it came up with an "error in configuration" and would not let me proceed. Yet, even though I just had to exit without completing installation, now all of my family is able to connect wirelessly with our laptops and all seems fine, but did I miss any important steps after #10 that will cause problems in use later? This router is installed in a vacation rental a long distance from our home so I want to make sure it is correct before we leave.
Product #WRT54G version#8
Cayman

hi...
actually sometimes it does happen.....
but to make sure that the router has properly connected get in to the interface go to the status and check if yOu can get an IPaddress and DNS from there...

Installation not completed

Around 6 months ago Verizon came to my apartment building and cut holes in the walls, wired and set up jacks, (over 100 units) I recently received word our area is good for the installation, so I called and set up an appointment, the tech arrived and about 2 hours into the install tells me he cannot finish the job because my apartment is not grounded, he then called Verizon and explained the problem, a few minutes later I received a call from Verizon stating this has to be taken care of by the landlord, when I notified the landlord he told me no way is he going to rewire the building.
Verizon I am a little upset and I think you dropped the ball on this, if before you spent the time and money cutting holes installing jacks you should have mentioned there was specifications that needed to be met first, now you do this work and expect the landlord to meet your specifications to finish the job, that doesn't seem right. You have lost the business, lost time and money, the technician lost the install, I lost a days work. And I still have no fios.
This should not have happened, There must be something that can be done to resolve this. This will be a problem in the future and needs to be addressed.
Thank you for your time.
Dennis Harris
{edited for privacy}

Recently several states have changed the electrical codes with some very strict requirements regarding grounding. Especially NY. And even though Verizon installed all of the phone jacks and such, they dont do electrical, so they may not have even known at the time. If during the ONT installation, there is not the new required ground available, they are not allowed to continue until the building is brought up to code. Now quite honestly, this is a complete guess as we dont know what happened in your specific case but as this has been a fairly common issue since the grounding requirements change in some states, its a fair guess.
====================================================================================
Error exists between keyboard and chair.

Behavior of silent installer not completely specified

On page 3 of the "Adobe AIR 1.5 Runtime Redistribution Instructions" under "Silent installation" states in part:
The AIR application installer installs the correct version of Adobe AIR on the target computer, as required by the AIR application to be installed. For example, if the AIR application to be installed requires the AIR 1.1 runtime, and the end users computer has only AIR 1.0 installed (or no version of AIR installed), the installation process installs the AIR 1.1 runtime along with the AIR application.
and then:
To install or update the runtime only, use the -silent option without specifying a path or any other options.
However, the instruction do not specify what happens in the following case:
+ The -silent option is used to update the runtime only.
+ The user already has a newer version of AIR on his/her computer than what is about to be installed.
What happens in this case? Does the installer:
A) Do nothing and exit successfully?
B) Downgrade the user's installed AIR version?
C) Exit with an error code, message, or dialog?
D) Something else??

When a newer version of the runtime is already installed, the installer (running in silent mode) does nothing and exits.
Note that to install Adobe AIR silently, you must contact Adobe and request an Adobe AIR runtime redistribution license. It sounds like you have already done this, Paul, but I just want others to know. Here are details:
http://www.adobe.com/products/air/runtime_distribution1.html

Lion installer not completing

After downloading the Lion installer from the App Store, I tried to install over 10.6.8. Several attempts have failed. After maybe 3 minutes of running, the installer leaves me in the disk utility screen, with no way out except to choose one of 4 options, none of which are useful. If I quit the disk utility, I wind up booting in 10.6.8. My only guess is that the App Store download is flawed, but I see no way to repeat the download. Any ideas?

Update: I contacted Apple Support through the Express Lane option and was called by a rep. After listening to my problem he bounced me to a senior advisor. I have so far spent over 2 hours on the phone and much more on my own trying everything under the sun. The most recent was to do a clean installation of Snow Leopard on an unused disk partition, upgrade to 10.6.8, and try to install Lion. In every case it fails in exactly the same way. So far the installation log has been no help to the guy. What I was calling Disk Utilities is actually Os X Utilities, with 4 options other than quitting. The only option worth trying is to re-install OS X, which simply loops around to the same failure. I have sent him a dump from Profiler, but so far he sees nothing wrong with anything.

HP Solution Center device installation not complete

I have a PhotoSmart C7280 all-in-one printer running as an Ethernet networked printer. My personal PC is an HP Pavilion Slimline s5280t running Windows 7 Pro 64 bit. I've had the printer for longer than I've had the Pavilion. I use HP Solution Center at least once a month to copy documents to PDF for a volunteer job I have. Yesterday I tried to use it, and got the "device installation not complete" error. Uninstalling and reinstalling HP Solution Center didn't work. I did some research on the forums, and found the discussion of "the folders that start with 7Z."
I ran the Uninstall_L3.bat last night. It uninstalled everything. I then downloaded the drivers from the HP site, again. When I ran the install, it failed because "a file is missing." It didn't say what file. It created a "solution" for me, basically of going through all the steps to make sure that the printer and router were working (they are) and the printer was on the network (it is). I then downloaded the drivers AGAIN and AGAIN got a "file missing" error on the install. And my printer has been uninstalled. And I have a NEW suggestion from HP that I should reinstall after turning off all my startup tasks and rebooting.
If the driver package for the C7280 is defective, and right now I'd bet money that it is, telling me to turn off my startup list, which hasn't changed in months, is not going to help. Because my printer is out of warranty (hey, my PC is out of warranty), I don't expect any help from HP. I'm hoping that some other user will be able to suggest something that will work. I'm about ready to go back to the CD that came with the printer and install from that. Help?
This question was solved.
View Solution.

Sorry you have had such a difficult time getting Solution Center to work. You have certainly done all the basic and advanced steps to get this to work. I always keep a forum post stored on my computer that takes troubleshooting Solution Center to a different level of advanced.
--Problems Installing HP Solution Center - SOLUTION FOUND!--
I recommend reading this post thoroughly to review the comments and see how the steps play out and how certain problems are exposed. It certainly discusses the missing files you referenced.
I usually just scan using Paint or Windows Fax and Scan once I can print as it is just a little easier than working in the registry of an HP computer. So please do be careful if you choose to go into the registry.
First thing's first, I recommend creating another User Account in the Control panel with admin rights, then running the installation disk in the second user account before attempting anything in the above forum post. This will eliminate any conflicts from previous attempts on the main User Account.
I really hope this works for you! Let me know of any error messages you may get during the installation with the disk.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Installation of adobe air is not completing on windows 7

I am trying to install adobe air version 15 on my Toshiba laptop with Windows 7. When installation starts the Adobe AIR Setup screen freezes and installation does not complete. I cancelled the install, but the Adobe AIR Setup screen persists and just says "Cancelling". Trying to upgrade AIR as have been having issues with Windows 7 after installing th 2014 Jaqui Lawson Advent calendar. (Windows will not shut down using Shutdown button, and Ctrl-Alt-Del does not bring up task manager anymore). Here is my Adobe Air Install Log:
[2014-10-16:18:48:33] Clearing unused background update directory
[2014-10-16:18:48:34] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-10-16:18:48:34] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-10-16:18:48:34] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-10-16:18:48:34] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-10-16:18:49:13] Unpackaging complete
[2014-10-16:18:49:15] Unpackaging complete
[2014-10-16:18:49:18] Download success
[2014-10-16:18:49:18] Runtime updated downloaded
[2014-10-16:18:49:18] Download success
[2014-10-16:18:49:18] Runtime updated downloaded
[2014-10-25:08:58:35] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-10-25:08:58:36] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-10-25:08:58:36] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-10-25:08:58:36] Commandline is: -updatecheck
[2014-10-25:08:58:36] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-10-25:08:58:36] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-10-25:08:58:36] Commandline is: -updatecheck
[2014-10-25:08:58:36] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-10-25:08:58:36] Performing pingback request
[2014-10-25:08:58:37] Starting runtime background update check
[2014-10-25:08:58:37] Clearing unused background update directory
[2014-10-25:08:58:37] Performing pingback request
[2014-10-25:08:58:37] Starting runtime background update check
[2014-10-25:08:58:37] Clearing unused background update directory
[2014-10-25:08:58:37] Runtime background update check failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: could not clear background update directory" errorID=0]
[2014-10-25:08:58:37] Runtime Installer end with exit code 0
[2014-10-25:08:58:37] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-10-25:08:58:37] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-10-25:08:58:41] Unpackaging complete
[2014-10-25:08:58:42] Download success
[2014-10-25:08:58:42] Runtime updated downloaded
[2014-10-25:08:58:55] User had deferred installing the update
[2014-10-25:08:58:55] Runtime Installer end with exit code 0
[2014-10-25:14:06:33] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-10-25:14:06:33] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-10-25:14:06:33] Commandline is: -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-10-25:14:06:33] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-10-25:14:06:33] Installed app (JLCircus) located at c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-10-25:14:06:38] Starting runtime background update installation
[2014-10-25:14:06:38] Background updates not installed due to running applications
[2014-10-25:14:06:38] Launching subprocess with commandline c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-10-25:14:06:38] Runtime Installer end with exit code 0
[2014-11-01:16:39:59] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-11-01:16:40:00] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-11-01:16:40:01] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-01:16:40:01] Commandline is: -updatecheck
[2014-11-01:16:40:01] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-01:16:40:01] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-01:16:40:01] Commandline is: -updatecheck
[2014-11-01:16:40:01] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-01:16:40:02] Performing pingback request
[2014-11-01:16:40:03] Performing pingback request
[2014-11-01:16:40:03] Starting runtime background update check
[2014-11-01:16:40:03] Starting runtime background update check
[2014-11-01:16:40:03] Clearing unused background update directory
[2014-11-01:16:40:03] Clearing unused background update directory
[2014-11-01:16:40:03] Runtime background update check failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: could not clear background update directory" errorID=0]
[2014-11-01:16:40:03] Runtime Installer end with exit code 0
[2014-11-01:16:40:03] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-11-01:16:40:03] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-11-01:16:40:10] Unpackaging complete
[2014-11-01:16:40:11] Download success
[2014-11-01:16:40:11] Runtime updated downloaded
[2014-11-01:17:40:16] User had deferred installing the update
[2014-11-01:17:40:16] Runtime Installer end with exit code 0
[2014-11-01:18:10:41] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -applyupdates "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-01:18:10:42] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-01:18:10:42] Commandline is: -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-11-01:18:10:42] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-01:18:10:42] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-01:18:10:42] Commandline is: -applyupdates "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-01:18:10:42] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-01:18:10:43] Installed app (JLAdventCalendarEdwardian2013) located at c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-01:18:10:43] Installed app (JLCircus) located at c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-11-01:18:10:44] Starting runtime background update installation
[2014-11-01:18:10:44] Starting runtime background update installation
[2014-11-01:18:10:44] Launching subprocess with commandline C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-01:18:10:44] No background updates pending
[2014-11-01:18:10:44] Launching subprocess with commandline c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-11-01:18:10:44] Runtime Installer end with exit code 0
[2014-11-01:18:10:51] Runtime updater successfully launched
[2014-11-01:18:10:51] Runtime Installer end with exit code 0
[2014-11-01:18:11:08] Runtime Installer begin with version 15.0.0.293 on Windows 7 x86
[2014-11-01:18:11:08] Commandline is: -update "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-01:18:11:08] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-01:18:11:08] Installed app (JLAdventCalendarEdwardian2013) located at c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-09:13:10:56] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-11-09:13:10:57] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-09:13:10:57] Commandline is: -updatecheck
[2014-11-09:13:10:57] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-09:13:10:57] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-11-09:13:10:57] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-09:13:10:57] Commandline is: -updatecheck
[2014-11-09:13:10:57] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-09:13:10:58] Performing pingback request
[2014-11-09:13:10:58] Starting runtime background update check
[2014-11-09:13:10:58] Clearing unused background update directory
[2014-11-09:13:10:59] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-11-09:13:10:59] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-11-09:13:10:59] Performing pingback request
[2014-11-09:13:10:59] Starting runtime background update check
[2014-11-09:13:10:59] Clearing unused background update directory
[2014-11-09:13:10:59] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-11-09:13:10:59] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-11-09:13:11:00] Runtime background update check failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Error #3013" errorID=3013]
[2014-11-09:13:11:00] Runtime Installer end with exit code 0
[2014-11-09:13:11:10] Unpackaging complete
[2014-11-09:13:11:13] Download success
[2014-11-09:13:11:13] Runtime updated downloaded
[2014-11-09:13:11:23] User had deferred installing the update
[2014-11-09:13:11:23] Runtime Installer end with exit code 0
[2014-11-11:20:45:34] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-11-11:20:45:34] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-11:20:45:34] Commandline is: -applyupdates "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-11:20:45:34] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-11:20:45:35] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-11:20:45:35] Commandline is: -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-11-11:20:45:35] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-11:20:45:35] Installed app (JLAdventCalendarEdwardian2013) located at c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-11:20:45:35] Installed app (JLCircus) located at c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-11-11:20:45:36] Starting runtime background update installation
[2014-11-11:20:45:36] Launching subprocess with commandline C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-11:20:45:36] Starting runtime background update installation
[2014-11-11:20:45:36] No background updates pending
[2014-11-11:20:45:36] Launching subprocess with commandline c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-11-11:20:45:36] Runtime Installer end with exit code 0
[2014-11-11:20:45:39] Runtime updater successfully launched
[2014-11-11:20:45:39] Runtime Installer end with exit code 0
[2014-11-11:20:46:01] Runtime Installer begin with version 15.0.0.293 on Windows 7 x86
[2014-11-11:20:46:01] Commandline is: -update "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-11:20:46:01] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-11:20:46:01] Installed app (JLAdventCalendarEdwardian2013) located at c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-11:20:46:09] Launching subprocess with commandline c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-11:20:46:09] Runtime Installer end with exit code 6
[2014-11-16:13:37:08] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-11-16:13:37:09] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-16:13:37:09] Commandline is: -updatecheck
[2014-11-16:13:37:09] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-16:13:37:10] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-16:13:37:10] Commandline is: -updatecheck
[2014-11-16:13:37:10] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-16:13:37:11] Performing pingback request
[2014-11-16:13:37:11] Performing pingback request
[2014-11-16:13:37:11] Starting runtime background update check
[2014-11-16:13:37:11] Starting runtime background update check
[2014-11-16:13:37:11] Clearing unused background update directory
[2014-11-16:13:37:12] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-11-16:13:37:12] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-11-16:13:37:12] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-11-16:13:37:12] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-11-16:13:37:45] Unpackaging complete
[2014-11-16:13:37:47] Download success
[2014-11-16:13:37:47] Runtime updated downloaded
[2014-11-16:13:37:55] Unpackaging complete
[2014-11-16:13:37:55] Download success
[2014-11-16:13:37:55] Runtime updated downloaded
[2014-11-16:14:23:22] User had deferred installing the update
[2014-11-16:14:23:22] Runtime Installer end with exit code 0
[2014-11-16:14:31:30] User had deferred installing the update
[2014-11-16:14:31:30] Runtime Installer end with exit code 0
[2014-11-16:19:10:47] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -applyupdates "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-16:19:10:49] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-16:19:10:49] Commandline is: -applyupdates "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-16:19:10:49] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-16:19:10:49] Installed app (JLAdventCalendarEdwardian2013) located at c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-16:19:10:51] Starting runtime background update installation
[2014-11-16:19:10:51] Background updates not installed due to running applications
[2014-11-16:19:10:51] Launching subprocess with commandline c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-16:19:10:51] Runtime Installer end with exit code 0
[2014-11-24:08:24:51] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-11-24:08:24:51] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-24:08:24:51] Commandline is: -updatecheck
[2014-11-24:08:24:51] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-24:08:24:51] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-24:08:24:51] Commandline is: -updatecheck
[2014-11-24:08:24:51] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-24:08:24:52] Performing pingback request
[2014-11-24:08:24:52] Performing pingback request
[2014-11-24:08:24:52] Starting runtime background update check
[2014-11-24:08:24:52] Starting runtime background update check
[2014-11-24:08:24:52] Clearing unused background update directory
[2014-11-24:08:24:52] Clearing unused background update directory
[2014-11-24:08:24:52] Runtime background update check failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: could not clear background update directory" errorID=0]
[2014-11-24:08:24:52] Runtime Installer end with exit code 0
[2014-11-24:08:24:52] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-11-24:08:24:52] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-11-24:08:24:55] Unpackaging complete
[2014-11-24:08:24:55] Download success
[2014-11-24:08:24:55] Runtime updated downloaded
[2014-11-24:08:25:16] User had deferred installing the update
[2014-11-24:08:25:16] Runtime Installer end with exit code 0
[2014-11-24:08:35:22] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-11-24:08:35:29] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-24:08:35:29] Commandline is: -applyupdates "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-24:08:35:29] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-24:08:35:29] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-24:08:35:29] Commandline is: -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-11-24:08:35:29] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-24:08:35:30] Installed app (JLAdventCalendarEdwardian2013) located at c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-24:08:35:30] Installed app (JLCircus) located at c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-11-24:08:35:31] Starting runtime background update installation
[2014-11-24:08:35:31] Starting runtime background update installation
[2014-11-24:08:35:31] Launching subprocess with commandline C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background\updater -update "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-11-24:08:35:35] Runtime updater successfully launched
[2014-11-24:08:35:35] Runtime Installer end with exit code 0
[2014-11-24:08:35:50] Runtime Installer begin with version 15.0.0.356 on Windows 7 x86
[2014-11-24:08:35:50] Commandline is: -update "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-11-24:08:35:50] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-24:08:35:50] Installed app (JLCircus) located at c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-11-24:08:35:50] Runtime Installer begin with version 15.0.0.356 on Windows 7 x86
[2014-11-24:08:35:50] Commandline is: -update "c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe"
[2014-11-24:08:35:50] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-24:08:35:50] Installed app (JLAdventCalendarEdwardian2013) located at c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-24:08:36:43] Launching subprocess with commandline c:\program files (x86)\jl edwardian advent calendar\jl edwardian advent calendar.exe
[2014-11-24:08:36:43] Runtime Installer end with exit code 6
[2014-11-24:08:36:45] Launching subprocess with commandline c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-11-24:08:36:45] Runtime Installer end with exit code 6
[2014-11-24:18:01:27] Application Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-24:18:01:27] Commandline is: C:\Users\chris\Downloads\jlchristmasmarket.air
[2014-11-24:18:01:27] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-24:18:01:28] Unpackaging file:///C:/Users/chris/Downloads/jlchristmasmarket.air to C:\Users\chris\AppData\Local\Temp\fla863.tmp
[2014-11-24:18:01:43] Application signature verified
[2014-11-24:18:01:43] Unpackaging/validation complete
[2014-11-24:18:01:43] No app located for appID 'com.jacquielawson.marketadventcalendar2014' and pubID ''
[2014-11-24:18:01:53] Converting unpackaged application to a native installation package in C:\Users\chris\AppData\Local\Temp\fla68CB.tmp
[2014-11-24:18:01:56] Native installation package creation succeeded
[2014-11-24:18:01:56] Starting app installation to C:\Program Files (x86). Installing app com.jacquielawson.marketadventcalendar2014 version 1.0.1 using the source file at file:///C:/Users/chris/Downloads/jlchristmasmarket.air
[2014-11-24:18:01:56] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Unhandled exception Error: Directory can't be written to" errorID=5006]
[2014-11-24:18:01:56] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/chris/Downloads/jlchristmasmarket.air
[2014-11-24:18:01:56] Relaunching with elevation
[2014-11-24:18:02:06] Application Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-11-24:18:02:06] Commandline is: -stdio \\.\pipe\AIR_20968_0 -runtime "c:\Program Files (x86)\Common Files" -silent -logToStdout -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/chris/Downloads/jlchristmasmarket.air
[2014-11-24:18:02:06] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-11-24:18:02:07] Unpackaging file:///C:/Users/chris/Downloads/jlchristmasmarket.air to C:\Users\chris\AppData\Local\Temp\fla9DAF.tmp
[2014-11-24:18:02:44] Application signature verified
[2014-11-24:18:02:44] Unpackaging/validation complete
[2014-11-24:18:02:44] No app located for appID 'com.jacquielawson.marketadventcalendar2014' and pubID ''
[2014-11-24:18:02:44] Converting unpackaged application to a native installation package in C:\Users\chris\AppData\Local\Temp\fla307D.tmp
[2014-11-24:18:02:46] Native installation package creation succeeded
[2014-11-24:18:02:46] Starting silent app installation to C:\Program Files (x86). Installing app com.jacquielawson.marketadventcalendar2014 version 1.0.1 using the source file at file:///C:/Users/chris/Downloads/jlchristmasmarket.air
[2014-11-24:18:02:46] Installing msi at C:\Users\chris\AppData\Local\Temp\fla307D.tmp\setup.msi with guid {B995C6BE-D74C-4E8F-3C2F-B6E2B374A664}
[2014-11-24:18:03:05] Application Installer end with exit code 0
[2014-11-24:18:03:08] Elevated install completed
[2014-11-24:18:03:08] Launching subprocess with commandline C:\Program Files (x86)\JL Christmas Market\JL Christmas Market.exe
[2014-11-24:18:03:22] Application Installer end with exit code 0
[2014-12-01:17:33:53] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-12-01:17:33:54] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-12-01:17:33:54] Commandline is: -updatecheck
[2014-12-01:17:33:54] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-12-01:17:33:55] Performing pingback request
[2014-12-01:17:33:55] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -updatecheck
[2014-12-01:17:33:55] Starting runtime background update check
[2014-12-01:17:33:55] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-12-01:17:33:55] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-12-01:17:33:55] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-12-01:17:33:55] Commandline is: -updatecheck
[2014-12-01:17:33:55] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-12-01:17:33:56] Performing pingback request
[2014-12-01:17:33:56] Starting runtime background update check
[2014-12-01:17:33:56] Clearing unused background update directory
[2014-12-01:17:33:58] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update
[2014-12-01:17:33:58] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/3.6.0.6090/update to C:\Users\chris\AppData\Roaming\Adobe\AIR\Updater\Background
[2014-12-01:17:34:04] Runtime background update check failed: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="Error #3013" errorID=3013]
[2014-12-01:17:34:04] Runtime Installer end with exit code 0
[2014-12-01:17:34:07] Unpackaging complete
[2014-12-01:17:34:07] Download success
[2014-12-01:17:34:07] Runtime updated downloaded
[2014-12-01:18:24:30] User had deferred installing the update
[2014-12-01:18:24:30] Runtime Installer end with exit code 0
[2014-12-01:20:01:12] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-12-01:20:01:14] Runtime Installer begin with version 3.6.0.6090 on Windows 7 x86
[2014-12-01:20:01:14] Commandline is: -applyupdates "c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe"
[2014-12-01:20:01:14] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-12-01:20:01:14] Installed app (JLCircus) located at c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-12-01:20:01:15] Starting runtime background update installation
[2014-12-01:20:01:15] Background updates not installed due to running applications
[2014-12-01:20:01:15] Launching subprocess with commandline c:\program files (x86)\jacquie lawson circus\jacquie lawson circus.exe
[2014-12-01:20:01:15] Runtime Installer end with exit code 0
[2014-12-06:16:27:54] Runtime Installer begin with version 15.0.0.356 on Windows 7 x86
[2014-12-06:16:27:54] Commandline is:
[2014-12-06:16:27:54] Installed runtime (3.6.0.6090) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2014-12-06:16:28:04] Relaunching with elevation
[2014-12-06:16:28:04] Launching subprocess with commandline c:\users\chris\appdata\local\temp\airfd41.tmp\adobe air installer.exe -ei
[2014-12-06:16:33:44] Cancelling elevated install

IGiveUponAdobe wrote:
Have a look through the pages of pages of requests for help on installing Adobe Air apps on Windows 7 machines. What you'll find is that Adobe has duped a lot of people into doing basic testing on a vehicle that it should have tested thoroughly itself before release. So you'll find lengthy, highly technical and apparently idiosyncratic install logs posted, and then every once in a while Chris Campbell, Adobe's rep, comes online and says something like "Ho Hum. It doesn't seem to work. What you need to do is stand on your head while drinking a gallon of gasoline and singing through your ears. Why don't you spend another 20 hours trying that?"
Amazing. Could you imagine a supposedly legitimate company jerking people like this 50 years ago?
Don't waste your time. Air doesn't work. Find an alternative to Adobe products instead.
I wonder how long this will stay posted before somebody removes it.
Hello,
I understand the frustration, believe me, I really do. Unfortunately, while we do thoroughly test installers we do run into system specific issues from time to time. I do my best to help users, going out of my way to do desktop sharing sessions (at all times of the day and night to accomidate our global user base), creating repair scripts, etc. But you are correct, sometimes it does get technical and we do require the installer log to figure out what might be failing. I apologize if I wasn't able to solve your problem in the past, if you can point me to a post where I didn't follow through I'd be happy to re-read it and see if we can make progress.
I promise I won't remove your post, I just ask that you keep the responses polite and try not to get personal.
Thanks,
Chris

I'm trying to install iTunes on my computer running Windows 7 Home Premium.. I'm not sure if iTunes is compatible with it because when I try to install it, it says the installation is complete but it says there was an error so I can't get it! Please help!

Hellooo Apple Community!
I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
Thankyou thankyou thankyou!
Natalie.

I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

Adobe Flashplayer not responding even after the download says the installation is complete

I have tried to go on several websites and view content - Youtube, Slacker, and some websites that I need for educational purposes. When I try to view contact or upload a song, I get a message stating that I need the latest version of the Adobe Flash Player to do so. I have been through this process several times today, but each time that I download the Adobe Flash Player, it tells me that the installation is complete; however, I am still unable to view content or listen to the songs. I have restarted my computer several times and that hasn't worked. I can see that the Flashplay is listed on my add or remove programs in the control panel, but it is not responding when I enter into these websites. I have called technical support a couple of times today with no resolution to my problem. PLEASE HELP!!!! What can I do? Thanks

Hi td, So glad that worked for you. That is always the first thing to look for as the SWO must be there and be the correct version, it is an absolute! Without that, FP will not work and you can take that to the bank:-) A lot of users get in trouble by trying every suggestion and dig a deeper hole and then it takes a lot of time and effort to recover.
The process of a successful uninstall of the old FP and the install of the latest version, if followed is really easy. Most problems occur because some steps aren't followed.
Adobe has the next FP update in Beta now, when it will come out I don't know, but post back if you like if you have any questions at that time. Preventive action is always easier than the cure, believe me. But with yours it appears you did a
good job of installing the FP update.
Thanks for marking this thread answered, it helps those looking for similar issues.
Regards,
eidnolb

Windows could not complete the installation recovery error message with HP recovery discs

While doing a system recovery on an HP G72-b50US notebook using HP purchased recovery DVD's, the reboot "Welcome" screen always (tried 5 recovery attempts from scratch) generates the error message "Windows could not complete the installation. To install Windows on theis compuiter, restart the installation". any attempt at a reboot, even into safe mode, regenerates this same error message. How does this get fixed to allow completion of the installation process?

I wish I could tell you.
I also used the HP factory recovery disks on an 8200 Elite CMT. I used them once before with no problem.
The second time was a show-stopper. The recovery process would ask for all 4 disks, then the recovery installation would begin, reboot continue on, everything normal.
Then on the last reboot, when the recovery program stated it was configuring windows, it just quit and stated Windows could not complete the installation.
I made sure that I had absolutely nothing connected to the PC except the keyboard, mouse and monitor.
The only thing I can possibly think of was that I installed a Radeon HD 6570 video card which I replaced the Radeon HD 6350 card with. However, both cards are supported in the PC, and I cannot remember if I did the restore with the 6350 the last time or the 6570.
Now, the reason the ISO file will work is because this is a plain and simple Microsoft Windows 7 ISO file--the very same one that you download when you purchase W7 online from the very same download site.
It is not PC-specific and will install on any PC in the world.
A recovery disk is PC-specific, and is a very complicated mish-mash of programs, drivers, operating system, all customized for your specific model PC. Even something like installing a new hard drive or memory can foul up the works.
The downside of using the plain MS disk is the only programs and drivers you can install are the ones found on your notebook's support and driver page.
The upside of using the plain W7 installation, is you normally end up with a better performing PC, free of bloatware and unnecessary running processes.
For someone like me, it is a non-issue, but for others, they may miss some of the included software.
But that is better than having a computer that is of no value with no operating system installed, wouldn't you agree?
Paul

When douwnloading adobe premier pro fails. Writes that the installation is complete, some optional components are not installed correctly. What to do?

When downloading Adobe Premier pro fails, write that the installation is complete, some optional components are not installed correctly. What to do?

check your install logs for the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

How do you change the language to English in Photoshop CS5 after installation is completed? When I installed the program, English was not one of the language options so now everything reads in spanish. I can not read in spanish. Please help!!

Hi mujabee1111,
Please uninstall the application from your machine and then use the link below to download the installer for the CS5 download in English language:
Download CS5 products
Regards,
Sheena

I have iphone4. I tried 2 update some applicaStions when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way other application ?

I have iphone4. I tried 2 update some applications when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way 2 complete installation other than deleting the application that contains important data?

I have iphone4. I tried 2 update some applications when I was in USA, updates installation were not complete. Coming back 2 my country Egypt, I am unable to complete the installation of the update; it is still waiting. Is there a way 2 complete installation other than deleting the application that contains important data?

"HP Solution Center cannot run because your device installation is not complete"

I cannot use HP Solution Center because I only get this message when I start it: "HP Solution Center cannot run because your device installation is not complete". I am running Windows XP with an HP PhotoSmart Premium. I can print just fine and the printer is recognized by the PC and the network. I get the same problem whether connected wirelessly or through USB. I have re-installed all software multiple times. Please advise on how to get Solution Center up and running.

I had to do a total uninstall and reinstall of the driver. However, as you will see from this and other Support Forum threads there seem to be multiple stumbling blocks to the uninstall/reinstall process. Seems very glitchy. After nearly two days of unsuccessful tries I finally got it done. I did find three different official HP scenarios for the process, including one automatically sent to my desktop by HP upon one of the earlier failures. That sequence did not work work for me, but it was close--I got a partial install. But on another HP help file titled "Product Software Installation stalls or stops in Windows 7 with a USB connected product HP..." I found a six step process (with details for each), and it worked for me on the second try. Here are the six steps, plus extra things I did or discovered that could have helped make it work. I did step 5b. first: downloading and saving the HP driver file on my computer before starting other steps, since I elected not be be on the internet as I did the installation. 1. Uninstall the HP printer software. See my note below about four ways HP lists do to this. I used two of them.2. Turn off the 'terminate and stay resident programs (has to do with system configuration). See HP details.3. Clear temporary files and folders through Windows accessories.4. Disable firewalls (see my note below about this)5a. Disconned the cable from BOTH the printer itself and from the computer, BUT TURN ON the printer.5b. Get the lastest version driver for you printer from the HP site and save it where you can find it. (I did this first, before other steps, so I could install off-line)5c. Install the driver software that you saved. (see my note below about an optional step that helped me with this, so the install will complete, and not hang up)6. Enable the start up software that was turned off with step 2. (See HP details) Notes: there are versions of HP instructions that skip steps 2 and 6 and or 3 and 4, but that would not work in my case. I describe the steps that finally worked in case they can help someone else--this has been so frustrating. This uninstall/install process seems to be very touchy and perhaps changes depending on your printer or other configuration of your computer: Note about step 1: I found an HP document that listed four ways to uninstall. On my final and successful attempt I actually used two of the techniques. First I used the HP uninstaller program from the start menu program list on my computer stored with other HP stuff there. When I rebooted it did not appear that any HP programs were removed, but who knows, perhaps this got rid of some hidden file somewhere that had been causing all of the problems. Then I used the regular uninstall process from the control panel, and that worked. All HP programs were gone upon reboot. Note about step 3: I counld not believe this would help, but did it, and again, who knows, perhaps this is critical. Note about step 4: I assumed that step two 'terminate and stay resident programs' turned off my McAfee firewall and antivirus, so I did not turn it off. And I elected to be off the internet during install because I am always fearful about turning off those programs. However, and this may be the source of problems for many people, the HP list was very specific to turn off the Windows 7 firewall. I checked it and it was running, even though I thought McAfee was in charge. So I did turn off the Windows 7 firewall. Subsequently I learned that many people who have upgraded from earlier Windows operating systems to Windows 7 have the Windows firewall operating along with their other firewall, without knowing it. Apparently this does not happen if you did a clean install of Windows 7 rather than an upgrade install. Note about step 5c: On many of my tries the installation program would not terminate or complete, and I would get a partial install that allow some functions of the printer to work, but not Solutions Center. The only way I found to prevent this was at the step near the end, where you hook up the printer, select the box that says it's okay to connect it later. The installer program dumps an icon on you desktop that allows you to connect the printer after the installation shows complete and terminates by itself. By clicking the icon and plugging the cable into computer and the powered-on-printer when directed, the device installs perfectly. That was the only way I could get a full install, or get the installation to terminate. During the two days of trying to make this work I also reinstalled the latest version of Flash player since I read that HP Solutions Center needs it to show screens on your computer about printer functions. Of course downloading Flash onto a 64-bit version of Windows 7 is a little tricky too, but not that difficult. I do not know whether that was important, but it is one more thing to try if you can't make your Solutions Center part of the printer program work. I learned way more about the unintall/install process than I ever wanted to know. Sorry to be so wordy, but after two days of frustrating work on this I thought I should share this, in case any of these ideas could help someone else who is hung up on this. Perhaps there is an easier fix somewhere. The six-step process was on an HP help site and was not even for my specific printer, but the similar list from my model did not work. Wish I knew what the secret to success might have been.

Adobe CS6 re-installation does not complete

Hi! After os update my Adobe CS6 re-installation does not complete. What do I need to do? Br. Heidi

uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Installation not complete

Similar Messages

Maybe you are looking for