Installation not working from server

I used the CCpackager to prepare the install on Windows. I have the design tools suite (acrobat PS, Ill Indesign + some stuff) I have to make 2 directories, one for acrobat, and one for the rest. Well I didn't have to, the packager did ! And I have to start an exe with parameters on the server in order to install acrobat. So I made a batch file with the parameters . Then I launch the setup from the other directory to install the rest of the suite. The problem is my users are not in an active dir, and they mount a net drive, and they cannot launch the batch because MS does not allow launching a batch as admin from a network location. I even had someone making a script giving the user admin rights on the batch, but it's not working. Can ADOBE make a real setup.exe that launches everything in one time ?
Is it too hard to do ?
We just cannot install that CC, 2 times out of 3 the install stops.
I'm pissed
Simoncu

Moving the discussion to Enterprise Deployment for Creative Cloud, Creative Suite
Thanks,
Atul Saini

Similar Messages

Email notification not working from Server Monitor (for power outages etc.)

I have my email address entered in the notifications fields for power on Server Monitor. I tried pulling the plug (it's on a UPS), which it did notice but it never sent any emails. How do I debug this? Where is the SMTP settings or whatever is needed? Have people gotten the email notifications from Server Monitor to work?
Mike

tobias Eichner wrote:
Have you checked your mail filter, maybe the notification got mistakenly marked as spam ?
thank you for your reply! Is this working for you - are you getting notifications? My spam folder doesn't have any of these. Where did you set up the SMTP info for this? I don't see this anywhere. On the web, at
http://support.apple.com/kb/TA21298?viewlocale=en_US
it looks like you have to tell it how to send the emails in Message.framework:
The Message.framework looks in two places for a way to send email. The first
is that it looks for an SMTP server configured in the Email tab of Internet
preferences. The other way is to use an email account configured in Mail.
the question is, which user's .plist file for internet preferences or for Mail - which user's info is it using to send the notifications?
Mike

RichInputText setValue not working from server side

getting a reference to the backing bean that contains an inputTextbox
.. you are able to get the RichInputText box but calling setValue
has no affect on the UI... it sets it in memory but it doesn't update
on the GUI...
String deviceAssignTabStr = "#{backing_DeviceAssign}";
Object deviceAssignTabObj = ELUtil.get(deviceAssignTabStr);
DeviceAssign deviceAssignTab = (DeviceAssign) deviceAssignTabObj;
if (deviceAssignTab != null)
deviceAssignTab.getInputText6().setValue(rowOutput.toString());;

Hello,
You need to reset the local value, so use something like:
myInputComponent.resetValue();
myInputComponent.setValue(newValue);n
However, in your specific case, it seems very messy. You're just not using the good EL. It seems that you create a look of backing beans for bindings and none for values while it should be the opposite 99% of the times. "binding" attribute is unsafe and has many limitations, I don't know why people keep using it carelessly without any formal reason. As for defining many managed beans, you can add an ELResolver of your own instead and create them without defining them in any configuration file if that's what you dislike. About filling the session, I must disagree, it highly depends on the use case. The first scope to evaluate should ALWAYS be request as it's the most back/refresh button resistant scope. If the request scope doesn't fit, then most of the time the page flow one does, note that it fill the session memory footprint even more than the session scope, but it's also back resistant to some extends. Only when you need something really session scoped should you use it.
Finally, your way to access a managed bean seems either quite inefficient or inelegant. JSF provides two better means for that:
1. Injection, inject the backing bean in your action bean declaratively. That strategy doesn't always work though.
2. ELResolver. To access bean "backing_DeviceAssign", you can use the following which is, even if less sexy than a #{} delimited EL, much more efficient as it save some EL parsing time:
FacesContext context = FacesContext.getCurrentInstance();
ELContext elContext = context.getELContext();
boolean wasResolved = elContext.isPropertyResolved();
elContext.setPropertyResolved(false);
try
Object bean = context.getApplication().getELResolver().getValue(elContext, null, "backing_DeviceAssign");
if (elContext.isPropertyResolved())
return bean;
else
throw new FacesException("Could not find bean backing_DeviceAssign");
catch (Exception e)
throw new FacesException("Could not find bean backing_DeviceAssign", e);
finally
elContext.setPropertyResolved(wasResolved);
}Yes, it's ugly... Thanks to the really not so good ELResolver chain architecture that also prevent easy decorator...
Regards,
~ Simon

Preloader not working from server

Is there anything I should change about how I'm targeting
instances?
Here is my code on the same frame as the MC I'm
loading:

Use:
http://www.johnwolffmusic.com/johnWolffMusic.swf"

Me outgoing mail server not working from iPhone / Reply to email address

Hi, I have MM sent up on my iPhone and Mac, the SMTP outgoing mail server does not work from the iPhone but does from the Mac, to get around this I changed the outgoing server on the iPhone to my optusnet outgoing server, that has been working fine, the problem I have is if someone reply's to a email from the phone it gets bounced back becuase the reply to email address for me is @mac.com not from @me.com
I have tried to change the reply to email address in the phone but it only allows you to change the name not the @mac.com
I have only ever had a Me account not a .Mac account so I dont know why its locked to @mac

I deleted the MM account on the phone and reinstalled it again. Now it is working.

Dashboard link is not working from BI Publisher

Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.

Please somebody guide me.
Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
Thanks,
Vara

MSI installer not working MSI 5.0 Windows 7

Hello I am trying to get MSI installer to work and when I go to install anything that has the Windows Installer Package it opens Notepad in a scrambled message. I have tried numerous avenues to no avail (regedit,copy paste regedit, troubleshooters, sfc/scannow,
command prompt etc.) I tried to choose the file association of MSIexec in System32 and it just opens this
I have tried what is suggested in this forum
https://social.technet.microsoft.com/Forums/windows/en-US/f699e632-54ba-443b-85df-269a7fd6cf1a/windows-installer-not-working?forum=w7itprogeneral and regedit says:
I have tried this http://support.microsoft.com/kb/2438651#reso1 and didn't work
I have tried changing C :\Windows\System32\msiexec.exe /V in regedit and that didn't work
I have searched event viewer and all that's in there is a warning and information of successful installs and uninstalls.
I have tried %windir%\system32\msi.dll version in Command prompt and it says that the system cannot execute the specified program
I am thinking it is just a matter of finding the correct file association that the windows installer can use to install that program but I am unable to find that!
I did a system restore but the only good restore was from earlier today and it still just opens notepad. before I did the restore I went into services and the computer couldn't find the file (windows installer) so I did a restore and now it at least sees
the file and I can start the service.
Can I please get some help fixing this? would uninstalling MSI and re-installing it work? I have been searching forum after forum and nothing has yet worked.
I did a clean install of windows a couple of weeks ago
Microsoft answers gives me thee worst answers a person could come up with.
for a complete list of what my computer is check my bio

Hi ingenuities,
Try importing these reg file under Safe mode.
If you really need this work, I am supposing the only way is to try importing them manually, if any value key is using by process, use process monitor to filter out these processes and shut them down.I monitored values under MSI.package seems like no
value was using by system.
I exported msi.package and patch to text, it is from a clean Windows 7 intallation。
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Msi.Package]
@="Windows Installer Package"
"EditFlags"=hex:00,00,10,00
"FriendlyTypeName"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,\
00,6f,00,6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,\
32,00,5c,00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,\
00,2d,00,33,00,34,00,00,00
"InfoTip"="prop:System.ItemType;System.Author;System.Title;System.Subject;System.Comment;System.DateModified;System.Size"
"FullDetails"="prop:System.PropGroup.Description;System.Title;System.Subject;System.Category;System.Keywords;System.Comment;System.PropGroup.Origin;System.Author;System.Document.RevisionNumber;System.Document.DateCreated;System.ApplicationName;System.PropGroup.FileSystem;System.ItemNameDisplay;System.ItemType;System.ItemFolderPathDisplay;System.DateCreated;System.DateModified;System.Size;System.FileAttributes;System.OfflineAvailability;System.OfflineStatus;System.SharedWith;System.FileOwner;System.ComputerName"
[HKEY_CLASSES_ROOT\Msi.Package\DefaultIcon]
@="C:\\Windows\\system32\\msiexec.exe,0"
[HKEY_CLASSES_ROOT\Msi.Package\shell]
@="Open,Repair,Uninstall"
[HKEY_CLASSES_ROOT\Msi.Package\shell\Open]
@="&Install"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,36,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Open\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Repair]
@="Re&pair"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,37,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Repair\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,66,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\runasuser]
@="@shell32.dll,-50944"
"Extended"=""
"SuppressionPolicyEx"="{F211AA05-D4DF-4370-A2A0-9F19C09756A7}"
[HKEY_CLASSES_ROOT\Msi.Package\shell\runasuser\command]
"DelegateExecute"="{ea72d00e-4960-42fa-ba92-7792a7944c1d}"
[HKEY_CLASSES_ROOT\Msi.Package\shell\Uninstall]
@="&Uninstall"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,38,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shell\Uninstall\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,78,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
[HKEY_CLASSES_ROOT\Msi.Package\shellex]
[HKEY_CLASSES_ROOT\Msi.Package\shellex\ContextMenuHandlers]
@="Compatibility"
[HKEY_CLASSES_ROOT\Msi.Package\shellex\ContextMenuHandlers\Compatibility]
@="{1d27f844-3a1f-4410-85ac-14651078412d}"
[HKEY_CLASSES_ROOT\Msi.Package\shellex\PropertySheetHandlers]
[HKEY_CLASSES_ROOT\Msi.Package\shellex\PropertySheetHandlers\ShimLayer Property Page]
@="{513D916F-2A8E-4F51-AEAB-0CBC76FB1AF8}"
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Msi.Patch]
@="Windows Installer Patch"
"EditFlags"=hex:00,00,10,00
"FriendlyTypeName"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,\
00,6f,00,6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,\
32,00,5c,00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,\
00,2d,00,33,00,35,00,00,00
"InfoTip"="prop:System.ItemType;System.Author;System.Title;System.Subject;System.Comment;System.DateModified;System.Size"
"FullDetails"="prop:System.PropGroup.Description;System.Title;System.Subject;System.Category;System.Keywords;System.Comment;System.PropGroup.Origin;System.Author;System.Document.RevisionNumber;System.Document.DateCreated;System.ApplicationName;System.PropGroup.FileSystem;System.ItemNameDisplay;System.ItemType;System.ItemFolderPathDisplay;System.DateCreated;System.DateModified;System.Size;System.FileAttributes;System.OfflineAvailability;System.OfflineStatus;System.SharedWith;System.FileOwner;System.ComputerName"
[HKEY_CLASSES_ROOT\Msi.Patch\DefaultIcon]
@="C:\\Windows\\system32\\msiexec.exe,0"
[HKEY_CLASSES_ROOT\Msi.Patch\shell]
@="Open"
[HKEY_CLASSES_ROOT\Msi.Patch\shell\Open]
@="&Apply Patch"
"MUIVerb"=hex(2):40,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,\
6f,00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,\
00,6d,00,73,00,69,00,6d,00,73,00,67,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,\
33,00,39,00,00,00
[HKEY_CLASSES_ROOT\Msi.Patch\shell\Open\command]
@=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\
00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\
73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\
00,70,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
Regards
D. Wu

HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.

HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.

If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Some attachment buttons not working from external networks

Hi guys,
We have an eSourcing system that we access internally from server.internal.com . We also make this eSourcing system available to external vendors through www.external.com .
The external access is done using a Citrix AGEE system (reverse proxy, etc.). As part of this, the AGEE has the ability to change the hostname in the URL so the real server is hidden from external vendors. For example, when eSourcing generates a webpage, the AGEE searches through and replaces all http://server.internal.com references to http://www.external.com , and vice-versa for incoming calls.
This works for about 95% of the content, but there are a fer places where the links are not re-written correctly. One example is the File Attachment buttons when replying to a question. However, other file attachment buttons work correctly.
1. Does anyone else have a similar situation, using a Citrix or other product for external vendors?
2. Does anyone have a similar problem where certain links/buttons are not working from external networks?
3. Does anyone have any suggestions as to how to fix this problem?
4. Are there any settings that are specific to external access that may need to be set?
Thanks guys for any help/insight.
Michael.

SAP has re-written some of their code to help rectify the problem. We have also been working with Citrix to provide additional fixes. If anyone else has these problems, apply the latest patch of eSourcing and contact Citrix support to get the AGEE changes needed to make it work.
Michael

Mac Os X lion installation not working.

os x lion installation not working, when the installation bar comes to 99% a pop up widow tells me that the installation has failed and the file could be damaged or something. But i just downloaded it from appstore. Any ideas?

Here's an update on my problem:
Called Apple Support the other day. They basically told me that they can't help, because this is a problem of misconfiguration and that those kinda things weren't covered. Still the person on the line gave me a hint, I should look for leftovers of previously installed software in /Library/LaunchDaemons/ and /Library/LaunchAgents/ .
Well, that did the trick. In one of the folders I found "net.shrew.iked.plist". This file obvioulsy belongs to the ShrewSoft VPN client. I removed it and the built-in client works again.
I reinstalled ShrewSoft one more time to see if it works without the mentioned plist-file...needless to say it wouldn't connect anymore, but that's alright with me - for now.

Message "not downloaded from server. You need to take this account online

After upgrading to 10.4.9, when I click on any of the old emails in my inbox I get the message "this message not downloaded from server. You need to take this account online in order to download it."
I can still read all email in any other mailbox.
I can read all email received after upgrading.
I appreciate any help.
G4 17 inch Mac OS X (10.4.9) 1 gb ram

You upgraded to 10.4.9 from what?
If you upgraded from Mac OS X 10.3 or earlier, the problem is that the conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
1. Quit Mail if it’s running.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
8. Open Mail.
9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
Overstuffed mailbox is unexpectedly empty
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

External Task not working from job

Hi,
I am trying to call a batch file which copied fdr files from one folder to another and runs sarmanalyzer to generate csv files in the edq landing area.
The batch file is working fine when called from command prompt or double clicked in the edq server, but does not work as expected when called from project or job.
I generated a log file which confirms that the log file is being executed by the job to the last line, but the file copying and sarmanalyzer commands simply do not work.
Any pointers are greatly appreciated.
Thanks,
Sid

Hi Nick,
Thanks for help!
My bat file runs without any errors from external tasks in EDQ.
The account has full control on all the shared folders i am using.
My script:
    set ss_temp_dir=D:\Datanomic\dnDirector\config\landingarea\EDQ_Notification
echo s1 > log.txt
    set srm_analyzer_path=\\<appsrvr4>\d$\sba81\siebsrvr\BIN
echo s2 >>log.txt
COPY /Y \\<appsrvr1>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
COPY /Y \\<appsrvr2>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
COPY /Y \\<appsrvr3>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
:: The above copy is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
echo s3 >>log.txt
:: log s1-s2-s3 created in commandarea.
setLocal DisableDelayedExpansion
pushd \\<sharedloc>\siebfile\FDR\
setLocal EnableDelayedExpansion
echo s4 >>log.txt
for /f "tokens=* delims= " %%G in ('dir/b/od T*.fdr') do (set newest=%%G)
echo s5 >>log.txt
copy %newest% %ss_temp_dir%
echo s6 >>log.txt
:: log s4-s5-s6 created in   \\<sharedloc>\siebfile\FDR\
pushd %ss_temp_dir%
echo s7 >>log.txt
for %%F in (%ss_temp_dir%\*.fdr) do (
     ::set outfile=%ss_temp_dir%\%%~nF.csv &&
%srm_analyzer_path%\sarmanalyzer.exe -o %ss_temp_dir%\Snapshot_Working_CSV.csv -x -f %%F
:: The above saqrm_analyzer is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
echo s8 >>log.txt
MOVE /Y %ss_temp_dir%\*.fdr %ss_temp_dir%\BU\
echo s9 >>log.txt
:: The above move is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
::Log s7-s8-s9 created in %ss_temp_dir%
Thanks,
Sid

FOUND SOLUTION TO EMAIL ISSUE - "message not downloaded from server"

It took me 4 days to figure it out but there is a solution to the problem "the messsage has not been downloaded from server" and "the message has no content".
I do not have to set up "push" accounts from yahoo or gmail and it works with my corporate email.
Apple can reach me at <Message was edited by: Host> to discuss this issue.

I'm not a computer technician, and if you were to give me a few days looking at the problem, i'm sure I or anyone else could provide a solution. I'm not too bothered about the message appearing 50% of the time as i'm usually within easy reach of a Laptop or PC or can find another method to get access to my email.
So i'm not pi**ed off that you have found a solution. I'm just trying to obtain information for a post that says "FOUND SOLUTION TO EMAIL ISSUE - "message not downloaded from server" in the Apple HELP FORUMS...

My mail is not working from my ipod i looked it up it says it trouble shooting but its not giving me anything to fix it can someone help me?

My mail is not working from my iPod touch. I looked it up and it says it trouble shooting? But they are not giving me anything to fix it. I restored my iPod touch to see if that worked and it didnt. Can anyone help me?

Can you access the account from another device?
Without you telling use the email provider and type of account we can't really help you.

The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

Installation not working from server

Similar Messages

Maybe you are looking for