Installation OBIEE 11.1.1.5.0 failed at Configuration OCM
Hi,
I am installing OBIEE 11.1.1.5.0 on a Windows Server 2008 R2 with an Oracle Database 11g release 2, but I have a problem with the last step Configuration OCM.
Error : Error encountered in deploying OCM instance. Exit code =
Configuration Action 'Configuration COM' has failed.
Any ideas ?
Thanks
Edited by: 866321 on 17 juin 2011 06:28
Edited by: 866321 on 17 juin 2011 07:03
I also have the similar problem. I am installing OBIEE 11G(11.1.1.5.0) in the following
Linux atlopm02 2.6.18-194.el5xen #1 SMP Mon Mar 29 22:22:00 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
I am doing the Enterprise Install, and it failed at the last step
Configuring OCM
Given below is the error from the install log
*************** Executing Command **************
/u01/app/oracle/middleware/instances/instance1/bin/opmnctl startproc ias-component=coreapplication_obisch1
opmnctl startproc: starting opmn managed processes...
progress in calculate progress2
Executing Task: Modifying BI Configuration Files
progress in calculate progress2
Executing Task: Configuring OCM
oracle.as.config.ProvisionException: Error encountered in deploying OCM instance. Exit code = 11
at oracle.sysman.ccr.configCCR.OCMComponentImpl.onCreate(Unknown Source)
at oracle.as.config.impl.OracleASComponentBaseImpl.createComponent(OracleASComponentBaseImpl.java:596)
at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:105)
at oracle.as.install.bi.biconfig.standard.SystemComponentTask.doExecute(SystemComponentTask.java:66)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionMana
ger.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:8
1)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
I appreciate your suggestions/input to overcome this error.
Thanks
Bala
Similar Messages
-
OBIEE 11g Installing Failing on Configuring Domain
Lenovo Thinkpad T400
Windows XP SP3
8GB RAM
250GB
My installing of OBIEE 11.1.1.6.0 fails on Step 13 of 14 Configuring Domain. I have done the following steps before the installation.
Installed Microsoft Loopback Adapter
Set User Environment Variables to C:\TEMP
Set classpath to C:\Java\jdk1.7.0_05\bin (Made sure there were no spaces)
My log files reads as follows:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2012-08-12T21:55:18.265-06:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 26] [ecid: 0000J^TsEWp5yW^5xV_AiW1GA5kH00000H,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)Hi All,
Thanks for the response. Turns out I had to remove the underscore (_) from my computer name for the Configuring Domain process to work. Even though this worked, my OBIEE installation still failed at a later stage called PolicyStoreMerge. I have attached the log below.
C:\OBIHOME\Oracle_BI1\opmn\conf\opmn.xsd
[2012-08-13T16:50:38.046-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Updating opmn.xml at: C:\OBIHOME\instances\instance1\config\OPMN\opmn\opmn.xml
[2012-08-13T16:50:38.046-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Snippet:[[
<?xml version = '1.0' encoding = 'UTF-8'?>
<ias-component id="@BI_APPLICATION_NAME@_obiccs">
<environment>
<variable id="ORACLE_BI_OPMNMANAGED" value="true"/>
<variable id="ORACLE_BI_APPLICATION" value="coreapplication"/>
<variable id="ORA_NLS10" value="$ORACLE_HOME/nls/data"/>
<variable id="PATH" value="$ORACLE_HOME/common/ODBC/Merant/5.3/Drivers$:$ORACLE_HOME/bifoundation/server/bin$:$ORACLE_HOME/bifoundation/web/bin$:$ORACLE_INSTANCE$:$ORACLE_HOME/lib" append="true"/>
</environment>
<process-type id="OracleBIClusterControllerComponent" module-id="CUSTOM">
<module-data>
<category id="start-parameters">
<data id="start-executable" value="$ORACLE_HOME/bifoundation/server/bin/nqsclustercontroller.exe"/>
<data id="no-stdio" value="true"/>
</category>
<category id="stop-parameters">
<data id="stop-executable" value="integrator"/>
</category>
<category id="ping-parameters">
<data id="ping-type" value="integrator"/>
</category>
<category id="ready-parameters">
<data id="use-ping-for-ready" value="true"/>
</category>
</module-data>
<start timeout="600" retry="1"/>
<stop timeout="120"/>
<restart timeout="720" retry="1"/>
<process-set id="BIClusterController" numprocs="1"/>
</process-type>
</ias-component>
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.install.bi.util] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.install.bi.util.FilePermissions] [SRC_METHOD: setNormalFilePermissions] Setting Normal permissions on: C:\OBIHOME\instances\instance1\config\OracleBIClusterControllerComponent\coreapplication_obiccs1\component-logs.xml
[2012-08-13T16:50:38.078-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Post-config component: class oracle.bi.management.agentcore.impl.clustercontroller.BIClusterControllerManager
[2012-08-13T16:50:38.078-06:00] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Recording mbean em property: EMTargetType with value: oracle_bi_cluster_controller
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: onCreate] RETURN
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: registerComponent] Registering coreapplication_obiccs1 component
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: registerComponent] ENTRY
[2012-08-13T16:50:38.078-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnectionWLS] [SRC_METHOD: connect] Creating connection to hello there weblogic.management.mbeanservers.runtime
[2012-08-13T16:50:38.093-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.AbstractRuntimeServiceConnection] [SRC_METHOD: invokeMBean] Invoking RegisterMBean operation: registerComponent
[2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnectionWLS] [SRC_METHOD: disconnect] Breaking connection to mbean server
[2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: registerComponent] RETURN
[2012-08-13T16:50:38.125-06:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.utl.FileUtil] [SRC_METHOD: isWebsphereEnabled] Java property is not defined. isWebsphereEnabled=false
[2012-08-13T16:50:38.125-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: reloadOpmn] ENTRY
[2012-08-13T16:50:40.484-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: reloadOpmn] Invoking opmn reload...
[2012-08-13T16:50:56.171-06:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] [SRC_CLASS: oracle.bi.management.agent.api.install.ClusterControllerInstallHandler] [SRC_METHOD: reloadOpmn] RETURN
[2012-08-13T16:50:56.406-06:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Running script C:\OBIHOME\Oracle_BI1\common\bin\wlst.cmd
[2012-08-13T16:50:56.406-06:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J^Y8iMW5yW^5xV_AiW1GANBm00000F,0] Parameters : [C:\OBIHOME\oracle_common\modules\oracle.jps_11.1.1\common\wlstscripts\migrateSecurityStore.py][-type][policyStore][-configFile][C:\OBIHOME\user_projects\domains\bifoundation_domain\config\fmwconfig\bi-policystoremerge-jpscfg.xml][-src][XMLSourceContext][-dst][XMLDestinationContext] -
Siebel 8 installation on Sun Solaris 10 - Siebel server failed
Hi Expert,
I am currently installing Siebel 8.0.0.0 on Sun Solaris 10.
I had successfully configured a New Gateway Name Server, a New Enterpise in a Gateway Name Server and a New Siebel Web Server Extension Logical Profile.
Then, I tried to configure a Siebel Server, however the result of that is Execution Failed and popup the following error message:
Setup.product.install, Utility, err, unable to launch: "ksh export LD_LIBRARY_PATH=/siebel/siebelv8/siebsrvr/lib;PATH=${PATH}:.;/var/tmp/isjAAAC8aGVc/bin/java -Dtemp.dir=/var/tmp -cp /siebel/siebelv8/siebsrvr/bin/setup.jar run -args LANG=ENU REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebelv8/siebsrvr/admin/siebel_server_sia.scm" error code: "255"(SBL-STJ-00152)
I have tried to uninstall Siebel and re-install Siebel couple of times. I got the above same error all the time.
Searching on supportWeb, I don't find much information regarding "error code: "255"(SBL-STJ-00152)"
Does anyone know what does "error code: "255"" mean?
Does anyone have any ideas on how to resolve it?
Appreciate all your help.
Thanks in advance!!No....I don't find any port conflict.
However, in the log.txt I saw the following error at the beginning of the log:
(Apr 30, 2008 11:03:40 AM), Setup.product.install, Utility, msg1, Launching: hostname
(Apr 30, 2008 11:03:41 AM), Setup.product.install, Initialize, err, Unable to determine OS Service Level.(SBL-STJ-00176)
ServiceException: (error code = 305; severity = 0)
(Apr 30, 2008 11:03:55 AM), Setup.product.install, Utility, msg1, Launching: ksh -c env | grep SIEBEL
(Apr 30, 2008 11:04:18 AM), Setup.product.install, Utility, msg1, Launching: groups
(Apr 30, 2008 11:04:19 AM), Setup.product.install, Utility, msg1, Launching: groups
(Apr 30, 2008 11:06:03 AM), Setup.product.install, Utility, msg1, Launching: ksh -c uname -r
(Apr 30, 2008 11:06:03 AM), Setup.product.install, CheckPrerequisites, err, Solaris.Base.OS required version 5.9, version found: 5.10
(Apr 30, 2008 11:06:03 AM), Setup.product.install, CheckPrerequisites, wrn, Solaris.Base.OS is not installed. Sun Solaris 9 or above is required to install Siebel Applications
(Apr 30, 2008 11:06:05 AM), Setup.product.install, ConfigureBuildType, err, ServiceException: (error code = 315; message = "product bean Db\CONFIG does not exist"; severity = 0)
(Apr 30, 2008 11:06:05 AM), Setup.product.install, ConfigureBuildType, err, ServiceException: (error code = 315; message = "product bean Eai\CONFIG does not exist"; severity = 0)
Not sure if that is a problem but the installation went fine.
Just when I tried to configure Siebel Server, I got the execution failed with the error that I mentioned in my first posting. -
Installation of Adobe Premiere Elements 12 always fails
During the installation of my Adobe Premiere Elements 12, I always receive an error message (during the processing of linked components) which says:" During the installation an error has occured."
I have purchased Adobe Premiere Elements online and use the appropriate key provided by the retailer.
My Adobe Premiere Elements 10 works fine though but I would rather like to get my new program going.
I have tried all Adobe error correction proposels already but unfortunately in vain.
Any suggestions how to proceed?Thanks for your fast reply. I have already solved the problem and everything works fine.
Von: kglad [email protected]
Gesendet: Donnerstag, 28. November 2013 15:48
An: Weblogger
Betreff: Installation of Adobe Premiere Elements 12 always fails
Re: Installation of Adobe Premiere Elements 12 always fails
created by kglad <http://forums.adobe.com/people/kglad> in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5882899#5882899 -
Download and installation of update camera RAW 7.3 failed. How to solve this problem?
If the download failed, try using a different browser.
-
Installation of the new adobe muse version fails
Why does the installation of the new adobe muse version fail all the time? What is the problem?
Thanks for your help!
And have a great New Year...
Am 26.12.2012 um 18:00 schrieb Jeff A Wright:
Re: Installation of the new adobe muse version fails
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Please uninstall your current installation of Adobe Muse from Applications/Utilities/Adobe Installers. Once the software is removed please reinstall from https://creative.adobe.com/. You can find details on how to install the application at http://forums.adobe.com/message/4396277#4396277?tstart=0.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4945562#4945562
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4945562#4945562
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4945562#4945562. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Mit freundlichem Gruß.
Uta Guións
Basics of Communication | Uta Guións
Dipl. Kommunikationsdesignerin (FH)
Schälzigweg 77 | 68723 Schwetzingen
www.basicsof.com | Tl. +49 6202 16413
mobil +49 171 3860490
Der Inhalt der E-Mail ist nur rechtsverbindlich, wenn er unsererseits durch einen Brief entsprechend bestaetigt wird. Aussagen gegenueber dem Adressaten unterliegen den Regelungen des zugrunde liegenden Angebotes bzw. Auftrags, insbesondere den allgemeinen Auftragsbedingungen und der individuellen Haftungsvereinbarungen. Der Inhalt dieser E-Mail ist vertraulich und aussschliesslich fuer den bezeichneten Adressaten bestimmt. Wenn Sie nicht der vorgesehene Adressat dieser E-Mail oder dessen Vertreter sein sollten, so beachten Sie bitte, dass jede Form der Kenntnisnahme, Veroeffentlichung, Vervielfaeltigung oder Weitergabe des Inhalts dieser E-Mail unzulaessig ist. Wir bitten Sie, sich in diesem Fall mit dem Absender der E-Mail in Verbindung zusetzen. -
IDT (Beats) software installation fails during configuration phase
System: HP Pavilion dv7-6b70ed
OS: Windows 7 Ultimate 64 bits
I lost access to the Beats Audio Control Panel for reasons unknown and decided to reinstall the software. The installation seems to go fine, until I got the configuration screen one gets after restarting the system. The installation terminated with an "unknown error", after clicking the finish button.
It appears to be a problem, because my laptop sounds like having a severe cold. Anybody an idea?
thanks .... HHi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load,
Now use the Microsoft 'Fixit' on the link below to install the IDT Audio software.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Windows Azure Pack setup - 500 Internal Server Error - failed to configure databases and services
Hi,
I am trying to setup the Windows Azure pack to use the site to configure the Service bus 1.1 installation. When I try to configure the Windows Azure Pack I get the following error:
Admin Authentication Site
500 Internal Server Error - Failed to configure databases and services: Object reference not set to an instance of an object.
I'm not sure where the logs are to see what is causing this error. I have tried running as admin, running as a different user with no luck.
thanks,
Georgi
GeorgiHere's what I'm getting for this error:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite
Date: 3/27/2014 12:52:03 PM
Event ID: 103
Task Category: (65431)
Level: Error
Keywords: None
User: CLINICALSYSTEMS\Administrator
Computer: SERVER-PC.clinicalsystems.com
Description:
##### Application_Error: Exception=System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not
set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite" Guid="{1F742CC8-BDAA-56B6-A4B8-49F946D19CD1}" />
<EventID>103</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65431</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-03-27T16:52:03.223741300Z" />
<EventRecordID>111</EventRecordID>
<Correlation />
<Execution ProcessID="8068" ThreadID="7680" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational</Channel>
<Computer>SERVER-PC.clinicalsystems.com</Computer>
<Security UserID="S-1-5-21-3021050346-1670805799-1320812125-500" />
</System>
<EventData>
<Data Name="exceptionInfo">System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)</Data>
</EventData>
</Event>
Kori Francis Lead Software Developer Clinical Support Systems, Inc. -
Solaris 10connectivity to EMC: failed to configure ANY device on FCA port
I'm connecting a E2900 server with a EMC symmetrix storage with fiber channel.
But I'm getting the following errors, and I'm not able to see the external disks. Any help is really appreciated.
bash-3.00# cfgadm -al
c3 fc-fabric connected unconfigured unknown
c3::5006048c52a5b746 unavailable connected unconfigured failed
c4 fc-fabric connected unconfigured unknown
c4::5006048c52a5b749 unavailable connected unconfigured failed
bash-3.00# cfgadm -c configure c3
cfgadm: Library error: report LUNs failed: 5006048c52a5b746
failed to configure ANY device on FCA port
bash-3.00# tail -f /var/adm/messages
Nov 27 16:42:12 cosemm1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Nov 27 16:42:12 cosemm1 Unsupported LUN Addressing method 40 in response to REPORT_LUN
bash-3.00#
SO is Solaris 10 and I have installed recommended pathes:
118833-36 SunOS 5.10: Kernel patch
125100-10 SunOS 5.10: Kernel patch
120011-14 SunOS 5.10: Kernel patch
127111-01 SunOS 5.10: Kernel patch
119130-33 SunOS 5.10: Sun Fibre Channel Device Drivers (only necessary for Leadville Stack driver)
125184-04 SunOS 5.10: Sun Fibre Channel Device Drivers.
120222-21 SunOS 5.10: Emulex-Sun LightPulse fibre channel adapter driver v2.20k (only required for Emulex HBAs running Leadville)
125166-06 SunOS 5.10: Qlogic ISP fibre channel device driver v2.22 (only required for Qlogic HBAs running Leadville)
122640-05 SunOS 5.10: zfs genesis patch (require for zfs)
120473-12 SunOS 5.10: lib nss ldap PAM zfs patch (require for zfs)
119090-24 SunOS 5.10: iSCSI device driver and utilities
Also I have modified /etc/system adding those lines:
set ssd:ssd_max_throttle=20
forceload: drv/ssd
bash-3.00# modinfo |grep qlc
66 7ba7e000 ce1f8 282 1 qlc (SunFC Qlogic FCA v20070717-2.22)
bash-3.00# luxadm -e port
/devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
bash-3.00# luxadm qlgc
Found Path to 2 FC100/P, ISP2200, ISP23xx Devices
Opening Device: /devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl
Detected FCode Version: QLA2460 Host Adapter FCode(SPARC): 1.26 05/17/07
Opening Device: /devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl
Detected FCode Version: QLA2460 Host Adapter FCode(SPARC): 1.26 05/17/07
Complete
bash-3.00# luxadm -e port
/devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:devctl CONNECTED
bash-3.00# luxadm -e dump_map /devices/ssm@0,0/pci@18,600000/SUNW,qlc@1/fp@0,0:
devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 610f13 0 5006048c52a5b746 5006048c52a5b746 0x0 (Disk device)
1 617613 0 2100001b320122b7 2000001b320122b7 0x1f (Unknown Type,Host Bus Adapter)
bash-3.00# luxadm -e dump_map /devices/ssm@0,0/pci@19,600000/SUNW,qlc@2/fp@0,0:
devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 620f13 0 5006048c52a5b749 5006048c52a5b749 0x0 (Disk device)
1 627613 0 2100001b32014eb8 2000001b32014eb8 0x1f (Unknown Type,Host Bus Adapter)Check the configuration on the EMC side. This error message is the heart of the problem:
"Unsupported LUN Addressing method 40 in response to REPORT_LUN"
A quick Googling leads me to believe this means you're trying to assign a LUN ID higher than 255 to the host.
Best of luck! -
Failed to configure IPv6 interface(s): eri1 - how to debug?
I have a problem configuring the second network interface for IPv6 under Solaris 10. The first interface, eri0, is configured and works fine. The second one, eri1, has a link-local address but no global address. Both links are up and working, I can ping eri1 via IPv4 (10.0.1.9) from an external host.
netra / $ ifconfig -a6
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
lo0:1: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
zone wibble
inet6 ::1/128
lo0:2: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
zone foobar
inet6 ::1/128
eri0: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
inet6 fe80::203:baff:fe0b:fd4b/10
ether 0:3:ba:b:fd:4b
eri0:1: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
inet6 2001:0:0:1:203:baff:fe0b:fd4b/64
eri0:2: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
zone wibble
inet6 2001:0:0:1::4/64
eri0:3: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
zone wibble
inet6 fe80::213:a9ff:fe80:43c0/10
eri0:4: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
zone foobar
inet6 2001:0:0:1::3/64
eri0:5: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
zone foobar
inet6 fe80::213:a9ff:fe80:43bf/10
eri1: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 3
inet6 fe80::203:baff:fe0b:fd4b/10
ether 0:3:ba:b:fd:4bMy setup is the same for both interfaces:
- empty files /etc/hostname6.eri0 and /etc/hostname6.eri1
- both NICs connected to the same switch, with a L2-adjacent IPv6 router.
Last messages from the serial console are:
Failed to configure IPv6 interface(s): eri1
SUNW,eri0 : 100 Mbps full duplex link up
Hostname: netra
SUNW,eri1 : 100 Mbps full duplex link up
(at this point, I issued 'svcadm restart network/physical')
Failed to configure IPv6 interface(s): eri1
Aug 30 16:59:29 netra in.ndpd[259]: phyint_init_from_k: SIOCLIFGETND (interface eri1): No such process
Aug 30 16:59:29 netra last message repeated 1 time
Aug 30 16:59:29 netra in.ndpd[259]: Interface eri1 has been removed from kernel. in.ndpd will no longer use it
Do you have any ideas? Where to look?
Maciej
Edited by: automatthias on Aug 30, 2008 9:12 AM
Edited by: automatthias on Aug 30, 2008 9:12 AMThank you for the answer! I've found an option 'local-mac-address?' (the question mark is a part of the parameter name) in the 'ok' prompt.
More info for next generations:
1. Get to the 'ok prompt' (OpenBoot prom)
2. Type 'printenv' to see the current settings, look for 'local-mac-address?'
3. Set the parameter to 'true': 'setenv local-mac-address? true'
4. Type printenv again to see if the option was actually changed
This option is also described in Gentoo OBP reference:
http://www.gentoo.org/doc/en/gentoo-sparc-obpreference.xml
Thanks!
Maciej -
Windows Updates Failed to Configure in Windows 8 in Lenovo G500s
I am purchased my G500s in October 2013 and tried to install windows 8 updates first time. Before running updates I deleted all my data and switched laptop into default condition using One Key Recovery.
But while windows updates are being configured I am getting a message " Failed to Configure windows Updates, Reverting Changes" which is lasting for more than an hour and my laptop is restarting several time in this duration.
As I am running updates immediately after running One Key Recovery and there is no data on other drives, so this problem is not being caused by any Virus. My problem is similar as mentioned in this link Failure configuring Windows Updates - Windows 8 but I laptop came with Nitro 8, while this link is about problems caused by Nitro 7. Lenovo has not updated this article since 2012.
My laptop is pre installed with these important softwares:
Nitro Pdf 8, Mcafee Internet Security, CyberLink You Cam, Power Dvd.
If anyone can tell what is the cause of this problem I will be thankful to him.
Solved!
Go to Solution.Thanks for returning to provide your update.
I've marked your post as the solution. It may help other members in the community.
Cheers.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee. -
Failed to Configured Domain Services for Windows
Hi!
I am installing OES 2 SP3 with DSfW Pattern as a "New Domain Controller in an Existing Domain Services for Windows Domain" with Replication Configuration and Schema Partition.
During the "Perform eDirectory Configuration" at last task "Configure Domain Services for Windows " at 93% we encountered an error: "Failed to configure Domain Services for Windows".
Here's details of error ;
command : perl /opt/novell/xad/sbin/ndsdcinit.pl retry full-replica -d 'vec.apd.com.ph' -l 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'
-g 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph' -f 'apd.com.ph' -p 'apd.com.ph' -o 192.168.81.92 -t
Could not create gss directory /etc/opt/novell/xad/gss at /opt/novell/xad/sbin/ndsdcinit.pl line 463, line 652
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
LDAP Based utility [ndsConfigServerContext.sh] to retrieve server context for YaST
DomainName : vec.apd.com.ph
NdsAdminName : CN=Administrator,CN=Users,DC=vec,DC=apd,DC=com,DC= ph
ExistingServerIP : ANDROMEDA.vec.apd.com.ph
ExistingServerPort : 0
Add_DC : true
Returning server context->ou=OESSystemObjects.dc=vec.dc=apd.dc=com.dc=ph
SASL/GSS-SPNEGO authentication started
SASL SSF: 56
SASL installing layers
Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 503
at /opt/novell/xad/lib64/perl/Logger.pm line 119
Logger::_err('Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') called at /opt/novell/xad/lib64/perl/Logger.pm line 202
Logger::Log(0, 'Failed to fetch dNIPDNSZones from DNS_LOCATOR_OBJECT at /opt/...') at /opt/novell/xad/lib64/perl/Install/adc_install.pm line 532
adc_install::decide_domain_zones() called at /opt/novell/xad/lib64/perl/install/adc_install.pm line 150
adc_install::stage_domain('adc_install=HASH (0X8b9370)') called at /opt/novell/xad/sbin/ndsdcinit.pl line 1383
main::main(62, 'apd.com.ph', 'vvec.apd.com.ph', 'TRUE','ou=OESSystemObjects,dc=vec,dc=apd,dc=com,d c=ph','ADM_PASSWD_DOMAIN','ou=OESSystemObjects,dc= vec,dc=apd,dc=com,dc=ph','replops::DESTROY',
'APD.COM.PH',...) called at /opt/novell/xad/sbin/ndsdcinit.pl line 1301
main::main() called at /opt/novell/xad/sbin/ndsdcinit.pl line 1425
ENV PATH = /opt/novell/xad/sbin:/opt/novell/xad/bin:/opt/novell/xad/share/dcinit:/opt/novell/eDirectory/bin:
LIB=lib64
LD LIBRARY PATH =
/opt/novell/xad/lib64:/opt/novell/xad/lib64/nds-
modules:/opt/novell/eDirectory/lib64:/opt/novell/eDirectory/lib64/nds-modules
SASL PATH = /opt/novell/xad/lib64/sasl2
DCINIT CONFIG: /etc/opt/novell/xad/xad.ini
DOMAIN NAME: vec.apd.com.ph
PARENT NAME: apd.com.ph
FOREST NAME: apd.com.ph
NETBIOS NAME: VEC
Any ideas on this error ?
Regards. Thanks.
denzmoThanks for the reply.
I have some followup questions
2. Can you explain the DNS setting in your setup ?
Tree ---> Power--> apd.com.ph -- dlpc.apd.com.ph
-- vec.apd.com.ph -- Andromeda.vec.apd.com.ph (DNS)
-- Pictor.vec.apd.com.ph ( additional domain server ) -> "Failed to configure in DSFW"
1. apd.com.ph, dlpc.apd.com.ph, vec.apd.com.ph are DSfW domains or just DNS domains ?
2. Andromeda.vec.apd.com.ph (DNS) - is this the DC of a DSfW domain ?
3. You are adding the Additional domain controller to the vec.apd.com.ph domain right ?
The
# LDAPCONF=/etc/opt/novell/xad/openldap/ldap.conf /usr/bin/ldapsearch -Y EXTERNAL -s sub -b dc=ph "(objectclass=dniplocator)" dn
Heres the result ;
a.) running the command in the DNS server (child domain) ANDROMEDA;
SASL /EXTERNAL authentication started
SASL username: gidNumber=0+uidNumber=0, cn=peercred,cn=external,cn=auth
SASL SSF: 0
# extended LDIF
# LDAPv3
# base <dc=ph(objectclass=dniplocator) [email protected]> with scope subtree
# filter: (objectclass=*)
# requesting:ALL
# search result
search : 2
result : 32 No such object
text : NDS error : no such entry (-601)
# numResponses :1
This is strange. This ldapsearch is failing to find the locator object in the tree under dc=ph.
- Can you try this same command from your FRD DC too and find the result ?
- Is your server non-name mapped or your adding a DSfW server into an existing eDirectory tree (name mapped) ?
- If it is later can you try the same search with '-b' parameter replaced with container to which FRD is mapped to into the eDirectory Tree.
- Can you tell in your setup where are the locator object present for your first DSfW server which is acting as DNS server ?
- While installing this ADC server, you have given the remote dns server as 192.168.81.92. In the YaST DNS screen did you do retrieve (by clicking 'retrieve' button on the screen ) or you entered those inputs manually ?
- Another follow up question. The locator context provided to the ndsdcinit command in your first post, is 'ou=OESSystemObjects,dc=vec,dc=apd,dc=com,dc=ph'. Can you confirm your locator
context is correct ?
[/QUOTE]
b.) running the command in the ADC PICTOR;
SASL /EXTERNAL authentication started
ldap_sasl_interactive_bind_s: invalid credentials (49)
[/QUOTE]
This is expected as the server is not completely configured.
Please get it touch with our NTS for passing on more information about this setup. -
Shared services registration failing during configuration of EPMA 11.1.1.3
Hi All, I am currently woking on essbase and no knowledge of planning so trying to upgrade my knowledge. I installed epma 11.1.1.3 on windows 2003 VMware work station as I have windows 7 laptop. installed oracle 10g created a database (epma) created user/schemas (sm,ms) trying to configure foundation services, essbase, planning and reporting and analysis. the configure database and register with shared services failed. Am I doing anything wrong. I followed some documents for configuration which are well documented with screen shots still do not know what wrong I am doing. Please advice on how to avoid these failures.
Below is the validation results of the configuration.
Thanks in advance.
Srinivas
Oracle EPM System
Diagnostic Reports
Generated on 3/3/12 11:05 PM
Validation run on srinivas
Validation tool info: 11.1.1.3.0 drop 9-0 build 3129 on 07/16/2009 01:24 PM
OS name: Windows 2003
OS version: 5.2
Test Status Service Test Description Duration
Hyperion Foundation
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
relationalStorageConfiguration: Configuration Failed
Recommended Action: Try to configure mentioned tasks 0 s
FAILED OPN: OpenLDAP Check if global roles number no less than 16
Error: $item.exception.localizedMessage
Recommended Action: 0 s
FAILED OPN: OpenLDAP Connection to OpenLDAP
Error: srinivas:28089
Recommended Action: Start open LDAP 1 s
ERP Integrator
PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
Check whether all configuration tasks have been completed 0 s
Essbase / Client
PASSED WR: Windows Registry Check if EQD excel addin registered for Essbase Client 0 s
Essbase / Essbase
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Recommended Action: Try to configure mentioned tasks 0 s
FAILED EAS: Essbase server Essbase Server startup check using Maxl command
Error: Result: Unable to connect Essbase Server using MAXL command. Please check that essbase server is running.
Recommended Action: Check Essbase Server is started. 0 s
FAILED SVR: Essbase Java API Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** srinivas http://srinivas:13080/aps/JAPI
Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at srinivas. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
Recommended Action: Make sure external checker is working. 7 s
Essbase / Essbase Administration Services
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Some of suggested configuration tasks not completed yet.
Recommended Action: Try to configure mentioned tasks 0 s
Essbase / Provider Services
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Recommended Action: Try to configure mentioned tasks 0 s
Essbase / Smart Search
PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
Essbase / Studio
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Some of suggested configuration tasks not completed yet.
Recommended Action: Try to configure mentioned tasks 0 s
Financial Data Quality Management
PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
Check whether all configuration tasks have been completed 0 s
Foundation / Calculation Manager
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Some of suggested configuration tasks not completed yet.
Recommended Action: Try to configure mentioned tasks 0 s
Foundation / Performance Management Architect
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Some of suggested configuration tasks not completed yet.
Recommended Action: Try to configure mentioned tasks 0 s
Foundation / Workspace
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Some of suggested configuration tasks not completed yet.
Recommended Action: Try to configure mentioned tasks 0 s
PASSED HTTP: Http Is file [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] empty 0 s
PASSED HTTP: Http Check string [LoadModule jk_module modules/mod_jk] in file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
PASSED REG: Registry All links are present in registry. 0 s
Performance Scorecard
PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
Check whether all configuration tasks have been completed 0 s
Planning
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
applicationServerDeployment: Configuration Failed
Some of suggested configuration tasks not completed yet.
Recommended Action: Try to configure mentioned tasks 0 s
Profitability and Cost Management
PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
Check whether all configuration tasks have been completed 0 s
Strategic Finance
PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
Check whether all configuration tasks have been completed 0 s
Financial Management
PASSED CFG: Configuration WARNING: Some of suggested configuration tasks not completed yet.
Check whether all configuration tasks have been completed 0 s
Reporting and Analysis
PASSED CFG: Configuration Check whether all configuration tasks have been completed 0 s
FAILED SVR: Essbase Java API Launch external checker with next command: C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** srinivas http://srinivas:13080/aps/JAPI
Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server at srinivas. Timed out waiting to connect to the Essbase Agent/Server using TCP/IP. Check your network connections.
Recommended Action: Make sure external checker is working. 3 s
Test start time: 11:05:18 PM
Test end time: 11:05:40 PM
Total test duration: 21 sThanks to all for your suggestions. Below is the log I have checked at the first instance of failure after that resitering with shared services failed for every product. Is this something to do withis database connection? Please advise on how to resolve it.
Mar 6, 2012 10:48:54 AM org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-28080
Mar 6, 2012 10:48:54 AM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 3531 ms
Mar 6, 2012 10:48:54 AM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Mar 6, 2012 10:48:54 AM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Hyperion Embedded Java Container/1.0.0
Mar 6, 2012 10:48:55 AM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
log dir isC:\Hyperion\logs\SharedServices9
urlManifest jar:file:/C:/Hyperion/deployments/Tomcat5/SharedServices9/webapps/interop/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Attempting to verify the database configuration
Attempting to verify the database configuration
Database configuration test passed.
06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
06 Mar 2012 10:50:27 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=C:/Hyperion/deployments/Tomcat5/SharedServices9/config/Domain.xml}
configURL: file:///C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml
Done initialize: null
06 Mar 2012 10:50:35 - org.apache.slide.common.Domain - ERROR - Unable to migrate hub groups to css
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@9b2a51
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@2431b9
CMSOfflineServlet Initialized
2012-03-06 10:50:42,328 [main] ERROR com.hyperion.ces.utils.db.DBRegistryManager.<init>(DBRegistryManager.java:74) - Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-03-06 10:50:42,328 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-03-06 10:50:42,328 [main] ERROR com.hyperion.workflow.engine.server.repository.WfDomainStoreRdbms.initialize(WfDomainStoreRdbms.java:167) - java.lang.Exception: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-03-06 10:50:42,343 [main] ERROR com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:51) - com.hyperion.workflow.engine.api.base.WfException: Failed to get Registry Instance! DB Connection is not existing for SharedService. Check registry for SharedService.
2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot getUsers.
java.lang.NullPointerException
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:780)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2584) - Cannot signOn.
com.hyperion.workflow.engine.api.base.WfException: Cannot getUsers.null
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.wfx(WorkflowEngineServiceLocal.java:2593)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUsers(WorkflowEngineServiceLocal.java:782)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.getUserFromCES(WorkflowEngineServiceLocal.java:536)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.systemSignOn(WorkflowEngineServiceLocal.java:341)
at com.hyperion.workflow.engine.server.framework.WorkflowEngineServiceLocal.signOn(WorkflowEngineServiceLocal.java:387)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.signOn(WorkflowEngine.java:80)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:94)
at com.hyperion.workflow.engine.api.base.WorkflowEngine.trustedSignOn(WorkflowEngine.java:90)
at com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:34)
at javax.servlet.GenericServlet.init(GenericServlet.java:211)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1105)
at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:932)
at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3917)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4201)
at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:759)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:739)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:524)
at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:904)
at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:867)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:474)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1122)
at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:310)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1021)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:718)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1013)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:442)
at org.apache.catalina.core.StandardService.start(StandardService.java:450)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:709)
at org.apache.catalina.startup.Catalina.start(Catalina.java:551)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
2012-03-06 10:50:42,390 [main] ERROR com.hyperion.workflow.agent.TaskReceiver.init(TaskReceiver.java:39) - Error Getting the workflowEngine Cannot signOn.Cannot getUsers.null
Mar 6, 2012 10:50:42 AM org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-28080
Mar 6, 2012 10:50:43 AM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:28082
Mar 6, 2012 10:50:43 AM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/125 config=null
Mar 6, 2012 10:50:43 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 108250 ms -
Install Oracle BI 11g 11.1.1.5.0 Configuring OCM failed
Hi all,
I'm installing Oracle BI 11g on Window7 32 bit.
It's almost done. But I have an error at Configuration Progess / Configuring OCM failed. The message is: "Error encountered in deploying OCM instance. Exit code =1"
I check the install Log:
[2012-12-27T13:36:37.349+07:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] Checking for $ORACLE_HOME/ocm.rsp file existence
[2012-12-27T13:36:37.349+07:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] $ORACLE_HOME/ocm.rsp exists
[2012-12-27T13:36:37.349+07:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] Install handler params :-componentName ocm1 -componentType OCM -cfgHome C:\OracleBI11g\instances\instance1 -rspFilePath C:\OracleBI11g\Oracle_BI1\ocm.rsp -oracleInstance C:\OracleBI11g\instances\instance1
[2012-12-27T13:36:37.349+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: directoryIsPopulated] directoryIsPopulated found unexcluded file/dir: C:\OracleBI11g\instances\instance1\auditlogs
[2012-12-27T13:36:37.349+07:00] [as] [TRACE:32] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASInstanceProvisioner] [SRC_METHOD: calcDirectoryStatus] Oracle Instance directory status: INSTANCE
[2012-12-27T13:36:37.379+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: connect] Creating connection to weblogic.management.mbeanservers.runtime
[2012-12-27T13:36:37.379+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: getAttribute] Getting RegisterMBean attribute: RegisteredInstanceNames
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: disconnect] Breaking connection to mbean server
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: connect] Creating connection to weblogic.management.mbeanservers.runtime
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: invokeMBean] Invoking RegisterMBean operation: getRegisteredComponentNames
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.RuntimeServiceConnection] [SRC_METHOD: disconnect] Breaking connection to mbean server
[2012-12-27T13:36:37.389+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponent] Creating empty component directories...
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: createComponentDirs] ENTRY
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponentDirs] Confirming Oracle Instance exists: C:\OracleBI11g\instances\instance1
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponentDirs] Creating empty component directory: C:\OracleBI11g\instances\instance1\OCM\ocm1
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponentDirs] Creating empty component config directory: C:\OracleBI11g\instances\instance1\config\OCM\ocm1
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponentDirs] Creating empty component log directory: C:\OracleBI11g\instances\instance1\diagnostics\logs\OCM\ocm1
[2012-12-27T13:36:37.389+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: createComponentDirs] RETURN
[2012-12-27T13:36:37.389+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.OracleASComponentBaseImpl] [SRC_METHOD: createComponent] Provisioning OCM files for ocm1
[2012-12-27T13:36:37.399+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.as.config.impl.PortTracker] [SRC_METHOD: removePorts] Port tracker removing ports for component:
[2012-12-27T13:36:37.399+07:00] [as] [TRACE:16] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: onCreate] ENTRY
[2012-12-27T13:36:37.399+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: onCreate] Creating OCM instance directories in ORACLE_INSTANCE
[2012-12-27T13:36:37.399+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: onCreate] Deploying the OCM packages.
[2012-12-27T13:36:37.399+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 24] [ecid: 0000JjQystM2ZNYzLouHOA1GqxDq00000F,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl] [SRC_METHOD: onCreate] running cmd /c C:\OracleBI11g\Oracle_BI1\ccr\bin\setupCCR.exe -S OUI -V 10.3.0.3.0 -c -R C:\OracleBI11g\Oracle_BI1\ocm.rsp
[2012-12-27T13:36:39.621+07:00] [as] [TRACE] [] [oracle.as.config] [tid: 27] [ecid: 0000JjR4vD52ZNYzLouHOA1GqxDq00000I,0] [SRC_CLASS: oracle.sysman.ccr.configCCR.OCMComponentImpl$StreamBleeder] [SRC_METHOD: run] *Error : C:\PROGRA~1\Java\JDK17~1.0_0\bin does not contain java.[[*
JAVA_HOME does not contain a valid JDK/JRE.
Redefine JAVA_HOME to refer to a JDK/JRE 1.3.0 or greater.
when I check the System variables:
JAVA_HOME = C:\Program Files\Java\jdk1.7.0_05\bin\
Maybe I have problem in JDK version?
Can you plz help me fix?
Thank youOBIEE 11g is not certified with windows 7 32bit. Please see the certification matrix: http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.html
-
Upgrade Oracle Database in Oracle Fail Safe configuration.
Dear All,
I usually upgrade Oracle Database (10g, 10g r2, 11g, 11g r2) in stand alone configuration without problems.
Now, I will must upgrade one database from 11g to 11g r2 in Fail Safe configuration.
Please, is there some link to read before this operation ?
Many thx.Pl see if MOS Doc 223709.1 (How to upgrade or apply a patch to the RDBMS in an Oracle Fail Safe environment) can help
HTH
Srini
Maybe you are looking for
-
Not able to single space in dreamweaver CC
I am not able to single space in dreamweaver CC. i try hitting shift+enter like i have in the past n now it dont work. I am using the software on a mac.
-
Error while installing connector and printer drivers for MDSD
Hi experts, When installing printer drivers and connector on my handheld i am getting errors. I am usind MDSD21 application. here are the components i am installing. CONNECTOR_WM50_XSL_CRM_1_2_8 PIPRONEMF8I_WM50_XSL_CRM Also pasting the trace file..
-
What is the best way to render HDV at 1920x1080?
Hello, I am working with HDV footage in an HDV project in Premiere Pro CS3. I render it out at 1920x1080, square pixels, deinterlaced for the internet. My final product is an 1280x720 H.264 .mov file that I make in Quick Time Pro. My question is,
-
Why is the iPod so . . . . . basic?
I love both my green iPod mini and my iPod Video (love the video a little - no, a lot - more). I found a really cool alternate jukebox that you can load onto your iPod called Rockbox - and it has some GREAT features. It allows you to alter pretty muc
-
Qosmio G30 / G35 - differences in memory, sound, subwoofer, touchpad?
I would like to know which European models of G30 European series have LCD touchpad, where calendar is able to be showing, for example ? What is memory bus speed of it, 533 MHz or 667 MHz ? Why are there no subwoofwers in Qosmio series, in addition o