Installation of 2004s Doubt??

Hello All,
While Installing Netweaver 2004s we get Cental System,Distributed System & High Availability System??When we should use high availability system??Moreover while installing AS Java why we need SCS??

Hi
Standard System:
You can install a standard system on a single host.
In a standard system, all main instances run on a single host
1:Central services instance (SCS)
2:Database instance (DB)
3:Primary application server instance
Distributed system:
In a distributed system, every instance can run on a separate host
1:Central services instance (SCS)
2:Database instance (DB)
3:Primary application server instance
High- availability system:
In a high-availability system, you require besides the primary application server instance, at least one additional application server instance
Regards
Uday

Similar Messages

Creating add-on installer- v.2004

Hello There
I am trying to create an installer for add-on
I have used the sample from the SDK regarding this issue.
when I ran the installer, I get the error message" the installer must ran from SBO", although, I do ran it from there(by creating ard file, etc') - (when I register the add-on,it says that registration was successfully made, but, when I re-open the SAP, I see the error mentioned above).
Is there any suggestions for that Please???

Hi
I use this code added at end of addoninstaller extractfile
file = thisExe.GetManifestResourceStream("AddOnInstaller.Interop.SAPbouiCOM.dll")
        ' Create a tmp file first, after file is extracted change to exe
        AddonExeFile = IO.File.Create(path & "\temporal.tmp")
        ReDim buffer(file.Length)
        file.Read(buffer, 0, file.Length)
        AddonExeFile.Write(buffer, 0, file.Length)
        AddonExeFile.Close()
        ' Change file extension to exe
        IO.File.Move(path & "\temporal.tmp", path & "\Interop.SAPbouiCOM.dll")
        ' After renaming the file name the
        file.Close()
this code copies the dll to the same folder, you must add interop.sapbouicom.dll to the project in the same manner than your exe.
Kind Regards
Salvador Biot

Porblems Installation Netwaver 2004

(error code = 601; message="An Error happened during call of
MaxDB Tool sdbinst. Check end of Logfile
C:/DOKUME1/zuser/LOKALE1/Temp/MaxDBSAPNWPREV.log")
     at
com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown
Source)
     at
com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown
Source)
     at
com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown
Source)
     at
com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown
Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at
com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown
Source)
     at
com.installshield.wizard.service.AbstractService.invokeImpl(Unknown
Source)
     at
com.installshield.product.service.product.GenericProductService.installProduct(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown
Source)
     at
com.installshield.wizard.service.AsynchronousOperation.run(Unknown
Source)
     at java.lang.Thread.run(Unknown Source)
Ich bekomme immer die obige Fehlermeldung. Ich habe aber alles
gemacht, wie es in der sdn.comunity beschrieben ist. Die aktuelle
Trial Version heruntergeladen, mit WinRar entzippt. Dennoch immer
wieder die obige Meldung. Installiere wollte ich auf meine externe
Festplatte (über 250 GB Platz). Was mache ich nur falsch. Ich
haben Windows XP und SP2. Weiss jemand Rat? Oder har Hilfe? Ich
bitte um Hilfe.
Viele Grüsse an alle
Torsten Braun

Can you please write in English???
Greetings,
Blag.

RAC Installation ---- Hardware Requirment Doubt

Hi All,
I have to install 10g RAC at home for learning purpose. I have two PC's with same version of
linux (Oracle Enterprise Linux 32 bit each) installed, but having different hardware. One machine is laptop and
other is desktop. So, will it be possible to install RAC on these machines. Is it a pre-requestie to have same
hardwre at both machines.
Please give your valuable suggestions.

Hi,
You can istall RAC with the combination of Desktop and Labtop. You need NIC cards for both the Machines. You need shared storage. for that You can use either scsi disks or fireware disks. To use fireware you need fireware slots on both the machines. There are two ethernet cards you need one for Private interconnect between the nodes and one for Public. and you need switch, Then you have to connect the shared storage in fireware slots. You need to install the clusterware, before that you can use Openfiler to partition the disk or anything to partition the disk for ocr and votingdisk etc. Then you can install the ASM for Filesystem and Volumemanger for disk and Fra group. Then you can install enterprise agent if you want to use enterprise manager grid control. Then you can install software.

Help - installation error 2004s

Hi,
I am installing SAP Netweaver2004s(ERP)SR2 on (db2-9.5) the database instance(db2) failed with this error.
ERROR      2008-05-19 19:14:48 [iax6binstc.cpp:411]
           CDB6Instance::CreateInstance(const map<iastring,iastring>&)            lib=iamoddb6 module=CDB6InstanceMDB-01006 SQL1096N The command is not valid for this node type.
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall() JS Callback has thrown unknown exception. Rethrowing.
ERROR      2008-05-19 19:14:49 [iaxxgenimp.cpp:731]
           showDialog() FCO-00011 The step CreateInstance with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateDB2Instance|ind|ind|ind|ind|2|0|CreateInstance was executed with status ERROR .
TRACE      [iaxxgenimp.cpp:719]
           showDialog()
TRACE      [iaxxgenimp.cpp:1155]
           showDialog() waiting for an answer from gui

Did you manually catalog the database before?
Markus

Oracle Business INtelligence -installation, basic doubts

can i shoot oracle BI installation related basic doubts, and other issues that may arise in this forum ???

if it's enterprise edition.. you can post here..
Business Intelligence Suite Enterprise Edition

AddOn Installer for 2005

Hi Trinidad!
Is the "SAP Business One Development Environment Setup for SAP Business One SDK 2004 version" valid to generate addon installers for 2005 version?
Thanks,
vanesa

Hi Vanesa,
It is not valid for generating installers for 2005. There is a separate installer for version 2005. Version 2005 uses more functions in the installer than 2004, like EndUninstall, etc.
My suggestion would be to use the installer for B1DE 2005.
Hope it helps,
Adele

Template Installer for nwdi.

Hi,
I installed NWDI and in the documentaion I read about executing the DI template Installer as a pre-requisite.
I have never done this before and I checked the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
Is it necessary to do run this? For NWDI for ESS/MSS web dynpro customization, what scenario should I select?
can anyone please explain more about the template installer.
thanks
regards
sm

Hi,
DI template Installer:
NetWeaver 2004s Usage Type DI (NWDI) Installation
template installer
http://help.sap.com/saphelp_nw04s/helpdata/en/98/fa9b6ec510404dbcfebf35cb107c04/frameset.htm
ESS/MSS web dynpro customization
Customizing ESS Business Package using Web Dynpro
Regards,
Senthil K.

Installation of SOA Suite 11g for development purpose

Hello All,
I wanted to install SOA Suite 11g for development purpose on my laptop (OS Windows XP).
As per installtion prerequisite process in the download page of oracle.
I found the following pre requisite - installation of Oracle DB 11g EE(although i am having Oracle DB 10g R2 10.0.2.0 - now the problem is i am not able to run RCU in this data base, so i installed 11g)
Jdev 11g Download
Web Logic Server
RCU Utlilty run
then SOA Suite installation.
My doubt is , is there any SOA development installation available because 11g DB EE takes lot of space in my system.
if available please provide the link.
Thanks & regards
Aboothahir

Hello Anuj,
Thanks for your reply,
I am running RCU utility on the XE Database.
I am getting the following error:
RCU-6083:Failed - Check prerequisites requirement for selected component:OIM
Please refer to RCU log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Error: JVM is not installed on the Database.
RCU-6092:Component Selection validation failed. Please refer to log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Please provide a solution for this.
Thanks & Regards
Aboothahir M

Required useful links and suggestions for 2004s BI instalation.

Hi,
I am new to this area, We are planning to install BI7 system on Oracle10G, but we have already existing DB2 and SQL data bases..Can any one advice me how to connect with these data bases for get the existing old data.
Please send me the useful links if any on this. Full Points will be assigned*********
Thanks,
Raja Reddy.

Hi raja,
I think the following link will be help u to connect different databases....
http://www.selectorweb.com/informatica.html
its for installation guide (2004s BI)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1f6cc7d-0c01-0010-5a93-8def1fad5ea3
Regards
Harish

Livecache 7.5 installation

Hi All
We are planning to install a new Livecache 7.5 on AIX 5.1 server but we already have another SAPDB version 7.3.0 installed on same machine (It servs an XI installation). Our doubt is :
1. During the installation fase (for Livecache), our indep programs will be upgraded or do we need to do it before?
2. Is there any problem installing and working with this two softwares on same host?
Many Thanks
Daniela Godoi

Hello Daniela,
you should be able to run both on the same machine. Please make sure both instances are correctly configured and sized, so that you don't run into resource problems.
To answer your questions:
1. You have to do it before. In case you try to install a new liveCache/MaxDB 7.5 instance on a machine which already has a liveCache/SAP DB instance <= 7.4, then you need to upgrade the Client Installation first.
In other words: install the 7.5 client on your machine first (you can use sdbinst using the new 7.5 liveCache software to do that, as described in OSS note 649814).
!!! IMPORTANT:
Please be aware that with liveCache 7.5 there's a new Unix security concept. During the above client installation, you will be asked for a user & group, to whom the database will belong. The defaults are 'sdb' (user) and 'sdba' (group). If you have no objection against these, I suggest you take the defaults.
-> The user of the other instances (7.3) will then be placed in the 'sdba' group.
After installing the new 7.5 client software, you should be able to follow your 7.5 liveCache installation guide to install the complete liveCache 7.5 software.
2. As said in the beginning, there should be no problems, <i>if</i> everything is handled correctly.
Should you experience any problems at all, I'll probably ask you to open a OSS/CSS message on queue BC-DB-LVC.
Kind regards,
Roland

Silent installation from embedded kit

Hi,
I am getting the following error while exceuting the runSilentInstall script provided with the embedded tool kit for Oracle 9i database. I have made all the necessary changes in the scripts and am unable to locate the error.
Error! While cmd /c start /MIN /B /WAIT .\install\win32\setup.exe -silent -responseFile C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\responseFile.rsp executing command
(null)

Thanks. I found [this|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7b6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313339333833353331%7d.do]. I tried /qn, it doesn't work. Welcome, Prerequisite checking and License Agreement modal dialogs are visible and require user input.
Since we have several hundred users to upgrade I need to automate this process. Can you elaborate on your answer: "CR does support silent installs but I doubt the beta will". What makes Beta install different from any others?
Your help is very much appreciated.
Regards,
Jacob Seleznev

Unable to install SAP webAS on Windows 2003

Hi Everyone , I am trying to install SAP WebAS Java 6.4. We use an Oracle Database and i want to deploy
our web apps on the SAP WebAS . I get this error during installation :
ERROR 2004-11-09 15:00:39
CJS-00081 Assertion failed: in
function sapdb_sql_query(db_nm, sql_s, db_node) {
var ret_s = "";
var sdbInst = new sdbInstance();
sdbInst.dbName = db_nm;
sdbInst.dbHost = (db_node == undefined) ? installer.getHostName() : db_node;
var r_arr = sdb_sql_query(sql_s, sdbInst);
ASSERT(arguments.callee, r_arr != undefined, "ERROR EXECUTING DBMCLI COMMAND!");
if (r_arr[0] == "false") {
var err_msg = "ERROR EXECUTING SQL QUERY: ";
for (var i_cnt = 1; i_cnt < r_arr.length; i_cnt++) {
err_msg = err_msg + r_arr[i_cnt];
ASSERT(arguments.callee, false, err_msg);
} else {
end_l = new RegExp("END");
for (i_cnt = 0; i_cnt < r_arr.length; i_cnt++) {
if (end_l.test(r_arr[i_cnt])) {
ret_s = r_arr[i_cnt + 1];
break;
return ret_s;
ERROR EXECUTING SQL QUERY: OKERR-24988,ERR_SQL: sql error-5015,Missing keyword:USERGROUP,TIMEOUT,STANDARD,RESOURCE,REPLICATION,NOT,LIKE,EXCLUSIVE,DBA,COSTWARNING,COSTLIMIT,CACHELIMIT
How do i get over this problem ?
Thanks
Ravi

Hello Ravi,
this problem probably occurred when a SQL user was trying to be created using a password with special characters, but failed.
Could you please copy the last couple of lines of the protocol named 'XCMDOUT.log' into this thread?
Regards,
Roland

Unable to Install WebAs6.4 on Windows 2003

Hi Everyone , I am trying to install SAP WebAS Java 6.4. We use an Oracle Database and i want to deploy
our web apps on the SAP WebAS . I get this error during installation :
ERROR 2004-11-09 15:00:39
CJS-00081 Assertion failed: in
function sapdb_sql_query(db_nm, sql_s, db_node) {
    var ret_s = "";
    var sdbInst = new sdbInstance();
    sdbInst.dbName = db_nm;
    sdbInst.dbHost = (db_node == undefined) ? installer.getHostName() : db_node;
    var r_arr = sdb_sql_query(sql_s, sdbInst);
    ASSERT(arguments.callee, r_arr != undefined, "ERROR EXECUTING DBMCLI COMMAND!");
    if (r_arr[0] == "false") {
        var err_msg = "ERROR EXECUTING SQL QUERY: ";
        for (var i_cnt = 1; i_cnt < r_arr.length; i_cnt++) {
            err_msg = err_msg + r_arr[i_cnt];
        ASSERT(arguments.callee, false, err_msg);
    } else {
        end_l = new RegExp("END");
        for (i_cnt = 0; i_cnt < r_arr.length; i_cnt++) {
            if (end_l.test(r_arr[i_cnt])) {
                ret_s = r_arr[i_cnt + 1];
                break;
    return ret_s;
ERROR EXECUTING SQL QUERY: OKERR-24988,ERR_SQL: sql error-5015,Missing keyword:USERGROUP,TIMEOUT,STANDARD,RESOURCE,REPLICATION,NOT,LIKE,EXCLUSIVE,DBA,COSTWARNING,COSTLIMIT,CACHELIMIT
How do i get over this problem ?
Thanks
Ravi

Hi Stefan,
the users now have been created with the appropriate passwords. The installtion procedure now doesn't complain about missing users but the problem still remains. Here the some of the log messages:
WARNING[E] 2004-11-25 13:32:49
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
WARNING[E] 2004-11-25 13:32:49
Error converting from port number=3601/protocol=tcp to service names. SAPRETURN=12
INFO[E] 2004-11-25 13:32:52
Unable to get value for environment variable JAVA_HOME.
INFO 2004-11-25 13:32:53
Execution of the command "C:/j2sdk1.4.2_03/bin/java.exe '-version'" finished with return code 0. Output: 1.4.2_03
WARNING 2004-11-25 13:32:53
Directory C:/WINNT is not a valid JDK directory: the java executable is missing.
INFO 2004-11-25 13:32:53
Found valid JAVA_HOME directory C:\j2sdk1.4.2_03 with JDK version 1.4.2_03.
INFO 2004-11-25 13:32:54
Execution of the command "C:\j2sdk1.4.2_03/bin/java.exe '-version'" finished with return code 0. Output: 1.4.2_03
INFO[E] 2004-11-25 13:32:54
Unable to get value for environment variable SAPINST_DEBUG_TRACE.
INFO[E] 2004-11-25 13:35:48
File system export (share) saploc does not exist.
INFO[E] 2004-11-25 13:35:49
Unable to get value for environment variable SAPINST_DEBUG_TRACE.
INFO 2004-11-25 13:37:05
Execution of the command "C:\j2sdk1.4.2_03/bin/java.exe '-version'" finished with return code 0. Output: 1.4.2_03
INFO[E] 2004-11-25 13:37:07
File system export (share) saploc does not exist.
INFO 2004-11-25 13:37:15
Looking for WebAS instances installed on this host...
INFO 2004-11-25 13:37:15
No installed instances found!
ERROR 2004-11-25 13:37:24
CJS-00081 Assertion failed: in
function InstallationScript_64() {
Probably it is an environment problem ...
Who can help?
Thank you, Peter

HP Color LaserJet Problems with intel iMac

Can anyone give me advice on the following:-
When I try to print from my wife's new intel iMac 20" to our HP Color LaserJet 2550L, it doesn't work and print center gives me the following error message ... "The process "hppostprocessing" terminated unexpectedly on signal 5" .
The printer is connected directly to the iMac via USB. It's not on a network.
I ran the HP Color LaserJet installer from the original CD that came with the printer and when that didn't work I downloaded another (latest) Color LaserJet installer (dated 2004) from the HP website. Still getting the same error message from PrintCenter.
When I look at the HP installer log, it appears that the installer tried several times without success to install plugins into the PPD folder (HD->Library->Printers->PPD).
After trying installation and checking out my PPD folder (above) there is nothing in it.
This printer has been (still) working fine with our older 20inch iMac.
Any advice or suggestions would be appreciated.

Same happened with my photosnart. Here is part of the email from HP
Thank you for contacting HP Total Care.
I understand from your email that you are not able to print to your
photosmart 1218 printer from your new imac.
I believe you are correct when you mention the glitch between the new
Intel processor in the iMac.
I have checked the Apple website and noted the pre-installed printer
drivers that ship with this operating system, do NOT include drivers for
the Photosmart 1218 printer. There are Gimp print drivers available for
the Photosmart P1000 printer. They may work, but provide only basic
printer functionality. (see the Apple document listed below).
http://docs.info.apple.com/article.html?artnum=303057#hpdrivers
I understand that our engineers are investigating the driver issue with
the Intel-based Macs, however, I cannot provide you with an expected
date of resolution. Your printer was manufactured in 2000, and the most
recent drivers are from Aug 2005. These drivers were created before the
Intel based macs were available.

Installation of 2004s Doubt??

Similar Messages

Maybe you are looking for