Installation of 9iAS Release 1 on a P-4 - Problem

Hi Friends,
I am trying to install 9iAS Release 1 on a P-4 2.4GHz W2K server with sp 4, 1GB RAM.
When iSetup.exe is invoked, the mouse pointer changes to hour glass for some time but nothing happens (no welcome screen, no wizard).
Inoking exe the second time displays a message that the setup configuration was not proper and setup should be run again.
The same exe when invoked on a P-III 650, W2K Prof. with SP4 it displays the welcome screen and continues.
I will appreciate any help on this.
Regards, Imran

This is a bug with the P4 chip and the Symantec JIT (symcjit.dll). You can probably get around this by copying the software CDs to a local disk and renaming all instances of symcjit.dll to symcjit.old and running the install from the local disk.

Similar Messages

After successful installation of 9ias release 2 version 9.0.2.0.1

Hi
After successful installation of 9ias release 2 version 9.0.2.0.1 in the service following services are missing (oracle_home9ias122http_server , form server and reportserver ) which has to be present as per old version installation but in new version(9.0.2.0.1) it is not there is anyone has any idea regarding this what one should do to get those sevices ready.
regards
nasar zia

Since you don't mention operating system, we assume you use Microsoft Windows something-or-other.
In which case, you open a command prompt, enter
sqlplus /nolog
connect / as sysdba
startup
exit
and post the entire console session.
(Replacing the 'something-or-other' with 'version and service pack' in our public knowledge base would be very useful as well.)

9ias release 2 in HP-UX cluster in HA mode configuration

Hi all,
We have configured 9ias release 2 Business intelligence .
Both Infrastructure, Report server, and database on the same HP-UX 9000 server.
Its been critical application, we want to configure the same in the HP-UX for High availability of the application server. So if this node fails the second node will take over & application server will b available for the users with minimal down time.
Can anybody help me in regards to this or give any i/p for How tos?
Thanks,
Dhanashree

We have had lots of issues with 9i AS on linux. May this tip might help you to reduce time each iteration of installation.
I have tried atleast 15 iterations before a succful installation. After few attemts infrastructure was succeful, what I did was to take a file level backup of the dirctory structure. So keep trying the mid tier only every time. For every attemp you can restore from the file leval backup and try only the mid tier part. It is impotranat that you clean everything for each attempt. Well this may not exactly the answer to your questions, but i would like to share my experience. i kow the pain.

9ias Release 2 accounts

In the name of security Which accounts/database schemas are not needed/can be deleted/locked post installation ?
Thanks
Neil

Mike,
Unfortunatley, no. 9iAS release 2 is not certifed on Windows XP. It is only certified on Windows NT 4 and Windows 2000.
-Todd

9iAS release 2 for Windows?

I see from the certification matrix that there is a 9iAS release 2 for Windows (NT/2000/XP/whatever flavour, presumably). However, when I look at the download/documentation areas, I can't find any reference to it. There's release 1 for everything in sight and release 2 for all flavours of Unix, but no Release 2 for Windows.
If it's not available, and not likely to be available for a while, can someone please tell me? It will save me looking any further. I am about to go out and buy a server, and need to choose the OS for it (and specify the hardware, so I need installation guide and release notes). If I can get 9iAS release 2 for Windows, I might get Win2K, but if I can't then I'll have Linux on there.

The release date has slipped. We've found some issues which must be fixed before we can release on Windows. Hopefully we will have it soon.
I understand that there is a high level of anticipation. I appreciate everyone's patience.
Thanks,
Ashesh Parekh
Oracle9iAS Product Management.

Deploying Webservice from JDev 9.0.3 to 9iAS Release 2

Hello,
i have written a webservice with JDeveloper 9.0.3 and on my local OC4J Installation the webservice is working fine.
I can also connect from JDev to that OC4J-Instance and deploy it. I installed that standalone OC4J also on other machines
and had also no problems connecting and deploying to them from JDev 9.0.3.
No I tried to connect to a 9iAS Release 2 (Linux) but everytime I connect I get following errors (see below)
What am I doing wrong ? Workarounds?
Many thanx !!
Greetings from Germany
Marc Teufel
Here are the JDEV-Messages:
C:\JDev903\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\JDev903\jdev\lib\oc4j_remote_deploy.jar http://LIN1.hama.de:1810/Oc4jDcmServletAPI/ ias_admin XXX listApplications /home/oracle/ias902
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command listApplications /home/oracle/ias902 UNDEFINED UNDEFINED UNDEFINED
Command = LISTAPPLICATIONS
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 404, HTTP response msg = Not Found
#### HTTP response is NOT ok
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (404)
#### Invalid servlet path

You need to install DCM Servlet on 9iAS (902x) before you can deploy to 9iAS .
If you have already done that, Make sure the binding name is correct (it is case sensitive).
Check out the following thread for details
Re: SQL query to fetch approximately 9000 rows
raghu
JDev Team

Error on deploying a Web Service on 9iAS release 2

Hi, somebody could help me on deploying a Web Service on 9iAS release 2?, I have applied the UDDI patch through the orauddi.zip file downloaded from otn web site. But on the J2EE Web Service Deploying Wizard (OEM Web Site), at the Web Service configuration stage, a message is displayed telling me that a Web Service must be deployed if the 9iAS instance which has an infrastructure connection, and this is not my case (I don't want to install the infrastructure. The UDDISYS schema was installed on a simple 9i DB release 2 successfully and for the orauddi application deployed I had created a Data Source for this user).
On trying to do the same task from JDeveloper 9.0.3, an error ADM is displayed advincing the searching of errors in the log.xml file located on IAS_HOME/dcm/logs directory. Below I have copy the last part of this file, corresponding to the error day.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2003-07-22T00:27:55.182-03:00</TSTZ_ORIGINATING>
<COMPONENT_ID>iAS_dcm</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>n/a</MSG_GROUP>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>preventas-ntbk</HOST_ID>
<HOST_NWADDR>192.168.1.78</HOST_NWADDR>
<MODULE_ID>oracle/defaultLogger/ExceptionLogger</MODULE_ID>
<PROCESS_ID>null-Thread[main,5,main]</PROCESS_ID>
<USER_ID>administrator</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>[TM] Config/LoadEdit/ImportExport Adapter resync error</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.NullPointerException
     at oracle.ias.sysmgmt.repository.datastore.DataStore.getOutOfSyncPluginConfigData(Unknown Source)
     at oracle.ias.sysmgmt.repository.RepositoryImpl.syncUpFromPersistence(Unknown Source)
     at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.syncUp(Unknown Source)
     at oracle.ias.sysmgmt.task.ConfigAdapter.resync(Unknown Source)
     at oracle.ias.sysmgmt.task.TaskMaster.resync(Unknown Source)
     at oracle.ias.sysmgmt.task.TaskMaster.resync(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2003-07-22T00:27:56.644-03:00</TSTZ_ORIGINATING>
<COMPONENT_ID>iAS_dcm</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>n/a</MSG_GROUP>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>preventas-ntbk</HOST_ID>
<HOST_NWADDR>192.168.1.78</HOST_NWADDR>
<MODULE_ID>oracle/defaultLogger/ExceptionLogger</MODULE_ID>
<PROCESS_ID>null-Thread[main,5,main]</PROCESS_ID>
<USER_ID>administrator</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>[ RM ] Exception in repository API getDBConnect()</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[oracle.ias.repository.schema.SchemaException: Unable to connect to Directory Server:javax.naming.CommunicationException: localhost:389 [Root exception is java.net.ConnectException: Connection refused: connect]
     at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:104)
     at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:331)
     at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:416)
     at oracle.ias.repository.SchemaManager.getDBConnect(SchemaManager.java:197)
     at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDBConnect(Unknown Source)
     at oracle.ias.sysmgmt.persistence.PersistenceManager.getSeedInfo(Unknown Source)
     at oracle.ias.sysmgmt.persistence.PersistenceManager.isDBConfigured(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
     at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
     at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
But, I can deploy this Web Service in the OC4J embedded on JDeveloper, successfully (from JDeveloper). Any idea?
Thanks a lot in advance,
Pablo.

Because you do not have an infrastructure database, you will not be able to deploy your web service from OEM as one of its steps is to register the service in the UDDI registy - the Web service deployment and UDDI registration are tied tightly together in OEM right now.
All is not lost, however. You have two routes to deploy the Web Service on Oracle9iAS:
1. Use DCM, which is the command line interface to deploy applications/webservices/wars/ears on Oracle9iAS. It does not have the dependency on UDDI.
To deploy a Web service using DCM, say your Web service ear file were named test.ear your deployment command would look something like:
c:\oracle\ora903\dcm\bin\dcmctl deployApplication -file test.ear
See the doc for much more detail to let you tailor DCM to do all the stuff that is available through EM or specific to your application:
http://download-west.oracle.com/docs/cd/A97329_03/core.902/a92171/dcm.htm#643834
2. In JDeveloper 9.0.3, there is a DCM Servlet that lets you do remote deployment to Oracle9iAS:
http://otn.oracle.com/products/jdev/htdocs/readme_9031.html#viadcm
I suspect your deployment problem from Oracle9i JDeveloper may be (this may be an incorrect assumption) due to trying to use a connection that is setup as if Oracle9iAS is a standalone OC4J.
Mike.

9iAS Release 2 Problem with IE

I have been warned that there is a problem with the IE browser against 9iAS release 2, and that there may be an IE
patch required. Has anyone encountered this problem? Any information would be much appreciated!
Thanks, Jane

Hi,
we are using IE 5.0.x, 5.5.x and 6.x and there are no problems.
HJ.Alles

Basic Search not working in 9iAS release 2

gurus,
the basic search is not working in 9iAS Release 2.
i created few items in the portal and searched for values in basic search ... it did not return any search results ... i checked the search settings and found the Drop Index button ... thus i assumed that the indexes are created .... is there something wrong here ...?
also, the client wants the search to return in a custom page .... how would i achieve that .... is there an api that i could call in form action and render the search output in my custom page ....?
any help would be appreciated ...
thanx

Have you run the job to update the indexes? Please refer to the Configuration Guide for instructions on synchronizing the indexes with your content.
The default Search Results page is defined in the Global Settings, under the Administration tab on the Builder page. Any page can be used for search results, as long as it contains the Custom Search portlet.

Mod_oc4j in 9iAS Release 2.0, Does anybody know when will it be released??

hi, does anybody know
1) When will 9iAS Release 2 be out for production which has mod_oc4j.
2) Configuring Apache in the current release of 9iAS 1.0.2.2.x with OC4J for performance issues, instead of using OC4J as a standalone server.
thank you,

I have had the same problem getting any dates from Oracle as well but after talking to Oracle and bugging them about it here is the response I received:
Sun Solaris before May 31
MS Windows - Solaris date + 8 weeks
Red Hat 7.1 - Solaris date + 1 week
SuSe SLES7 - Solaris date + 1 day
True64 - Solaris date + 4 weeks
I don't know how reliable these dates are but I thought I would pass on what I have been told, since some information is better than none.

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM   VSZ RSS TTY      S STARTED         TIME COMMAND
oracle     1353 0.6 27.2 601M 555M pts/2    S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root       3033 0.0 0.4 10.4M 7.7M pts/0    R + 10:59:44 0:00.06 ps aux
oracle     1351 0.0 0.0 2.46M 320K pts/2    I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle     1277 0.0 0.0 2.48M 312K pts/2    I + 09:02:44 0:00.04 -ksh (ksh)
root       1269 0.0 0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
root       1268 0.0 0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL   08:45:31     0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31     0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

Calling EJB from an applet in 9iAS Release 2?

Hello!
In 9iAS Release 1 it is not so easy to call an EJB from an applet. First the applet needs special privileges and then the applet starts only once. The cause of problem is the implementation of ormi.
Will 9iAS Rel. 2 support Applets calling EJBs?

Jeff,
I am also trying to make an applet client for an EJB deployed to OC4J.
I modified the java2.policy file as you suggested, but when I tried to run my applet, I
got the following error:
java.lang.ExceptionInInitializerError: java.security.AccessControlException: access denied (java.util.PropertyPermission tunneling.shortcut read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at java.lang.Boolean.getBoolean(Unknown Source)
     at com.evermind.server.rmi.RMIInitialContextFactory.<clinit>(RMIInitialContextFactory.java:34)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at com.sun.naming.internal.VersionHelper12.loadClass(Unknown Source)
     at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
     at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
     at javax.naming.InitialContext.init(Unknown Source)
     at javax.naming.InitialContext.<init>(Unknown Source)
     at its.fnd.ejb.EJBHomeFinder.getHomeObject(Unknown Source)
     at its.fnd.flight.ejb.EJBFlightFactory.<init>(Unknown Source)
     at its.fnd.flight.FlightFactory.<init>(FlightFactory.java:97)
     at EJBApplet.jbInit(EJBApplet.java:47)
     at EJBApplet.init(EJBApplet.java:36)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I am using OC4J (stand-alone) version 9.0.2.0.0 on Solaris 7 and Microsoft Internet Explorer
5.0 with the java 1.3.1 plug-in.
Here is the applet code that I use to lookup the EJB home interface:
Properties props = new Properties();
props.put(Context.INITIAL_CONTEXT_FACTORY,"com.evermind.server.rmi.RMIInitialContextFactory");
props.put(Context.PROVIDER_URL,"ormi://host:6666/app");
props.put(Context.SECURITY_PRINCIPAL,"admin");
props.put(Context.SECURITY_CREDENTIALS,"password");
Context ctxt = new InitialContext(props);
Object homeObj = ctxt.lookup("my_bean");
MyBeanHome home = PortableRemoteObject.narrow(homeObj, MyBeanHome.class);
The HTML page with the <applet> tag is a static HTML page that is part of OC4J's default
web application. The applet class file is located in a subdirectory of the default-web-app
directory. Here is the HTML page...
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=windows-1252">
<TITLE>
HTML Test Page
</TITLE>
</HEAD>
<BODY>
<object classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" width="580" height="450" name="EJBApplet" align="middle" alt="Loading EJBApplet ...">
<param name="java_code" value="EJBApplet">
<param name="java_codebase" value="/tests">
<param name="java_archive" value="xerces.jar,ejb.jar,oc4j.jar,jaas.jar"/>
<param name="java_type" value="application/x-java-applet;version=1.3">
<param name="java_scriptable" value="true">
<table cellpadding="1" bgcolor="#FFFFFF" width="580" height="450">
<tr><td>
This is a place for an APPLET.<br>Your browser doesn't support the correct applet java plug-in.<br><br>You can install the correct plug-in from here.<br><a target='_blank' onClick='javascript:self.window.close()' href="/classes/3rdparty/j2re-win-plug-in.exe">Click here to install plug-in.</a><br><br>Or if you have an Internet connection you can install the correct plug-in from here.<br><a target='_blank' onClick='javascript:self.window.close()' href="http://java.sun.com/products/plugin/1.3/plugin-install.html">Click here to install plug-in from Internet.</a><br><br>You can call your System Administrator for assistance.</td></tr>
</table>
</object>
</BODY>
</HTML>
I have searched the Internet, and the documentation, and tried several, different things,
but I can't get it to work.
Any and all help will be greatly appreciated.
Thanks,
Sofia.

"Oracle 9iAS Release 2" Link not working

hi
I want to download Oracle 9iAS Release 2(9.0.2.0.1), but the problem is the link is not working
"http://www.oracle.com/technology/products/ias/9ias_index.html"
this is link which directed to "Oracle 9i Application Server Relase 2".
I need the 9iAS on urgent basis but ............
please solve my problem

I think you will have better luck on the 9iAS forum:
Oracle Application Server - General
Personally, I had a lot of difficulties getting the full install going on 512M (it is fine if you are running JDev and OC4J and DB) but a full 9iAS, even turning off services is tough. Given you are trying 392, I think it is even more problematic.
Mike.

Difference between 9iAS Release 1 version 1.0.2.2.1 and Oracle 10gR2

Everyone,
We are facing very critical issue while upgrading from Oracle form 6i to Oracle 10g. Earlier the forms were deployed on web using 9iAS Release 1 version 1.0.2.2.1 which now migrated to Oracle 10gR2 Suite (Forms - 9.0.4.0.19 and Application Server is 10.1.2.0.2 and database is moved to Rack). We were not having issue during testing but as soon as we migrated in Production we are having issues starting from Stale connections to Http 500 errors, FRM-92000 and droped or lost network connectivity errors. Still unable to pin point the root cause. We increased the Memeory, JVMs, heap size, connection etc as per Oracle Support recomendations. Recently by looking in one of the article refered by Oracle and found that there are some recomendation for form upgrade from 6i to 10g. All of the recomendations are mainly to avoid network traffic. Now I have been assigned the case study to address this issue in the light of our current application system, which is mainly front end oracle forms, Userexit (C and Perl C for business logic) and Oracle database. This Userexit is residing at the application Server and used mainly for lots of business functionalities.
My question here is what makes this new upgrade different than previous application server. Is there any documentation available that refers how the calls are being received, routed and transmitted from Oracle Application Servers to client, database. I would really appreciate the inputs from all of you. Please feel free to ask if there is any question. Thanks.

Can you show the apache logs, oc4j_bi_forms_defaultisland log form opmn/logs, and other logs with the exact string of error?
This could be related to a lot of things.
Regards.

Is 9iAS Release 2 available

Can anybody tell me if 9iAS relase 2.0 is available now for SUN
SPARC Solaris OS?. If not when it is scheduled?.
Thanks

we are in the final stage of 9iAS release 2.0 (9iAS 9.0.2)
Solaris, will be out soon, stay tune to http://otn.oracle.com/

Installation of 9iAS Release 1 on a P-4 - Problem

Similar Messages

Maybe you are looking for