Installation of a 2nd version of FCP X

how do I download a second version of FCP X to MacBook? I bought and downloaded a version to a MacBook Pro 3 months ago, and need it on a small computer

See > https://discussions.apple.com/message/23979860#23979860

Similar Messages

  • Multiple versions of FCP on one system

    Hi guys just a quick question. I have FCP 5 installed on my mac. I am about to purchase Final Cut Studio 2, meaning FCP 6 will be installed on my system too.
    Does this mean I will have to uninstall FCP 5 first or will I basically have two FCP's on my system. My only worry is that installing FCP 6 will overwrite/destroy a project that I'm currently editing on FCP 5?
    Any suggestions or help on in?
    Also is Final Cut Studio 2 compatible with OSX 10.4.11?
    Thanks!!

    When you install FCS 2 the higher version of FCP 6 will replace your installation of FCP 5.
    You will not lose project files.
    Also is Final Cut Studio 2 compatible with OSX 10.4.11?
    Mac OS X 10.4.9 or later.

  • Is there a way to edit a project on two different versions of FCP?

    I am editing for a director who has a higher version of FCP. I don't want to upgrade because it will interfere with my work with other directors. But I'd like to be able to take the film that's now on 6.0.4 to my computer, which is running 6.0.1. I thought I'd heard somewhere about exporting an edl and being able to use that? I don't know anything about this, so if anyone can let me know if that's possible and and what the work flow is, it would be great!
    thanks

    See if there's a way with your current configuration to make this idea work:
    Clone your 2nd internal drive volume onto an external drive, then clone your boot drive volume onto the 2nd internal volume (erasing everything that's on the 2nd internal first.)
    Now you have two identical boot drives in your G5. With one of them booted, invoke Software Update, and update Final Cut to v6.0.4. Use that volume to work on this project, and when you have to work on a project that requires v6.0.1, boot to that drive volume.
    The downside is that your media files will now be on a firewire drive, but that's doable. Better yet, buy an eSATA PCI card and install it in your G5, and buy an eSATA external enclosure for your media drives. Perfect.

  • What earlier version of FCP will work with the intel-3processor?

    what earlier version of FCP will work with the intel-3 processor?

    The version of the CR designer that the reports were created in is really not that important. Though more on that below. What you need is Crystal Reports XI R2A (11.5.x). That is the last version of CR to ship the Report Designer Component  (RDC) that you are presumably using at this time. Note that this version is out of support thus no fixes, no phone support, though we welcome your queries on these forums. To obtain CR XI R2A you will have to contact sales; 866-681-3435. Do not get CR 2008 (12.x) as this version does not ship the RDC and only has the SDK for .NET and Java.
    Re. version of the reports. While the version of the designer the reports were created in should not be that important, the older the designer, the more potential problems you may run into. Updating the reports to CR XI R2A is highly advised. You can do this manually by simply opening the reports in the designer and saving them - making sure they still run once that is done. Alternatively, you can do this in code by simply using the .SaveAs method, or exporting to rpt file format. This may not however update the database connectivity correctly (the database engine was completely rewritten in CR 9) and testing will be needed to make sure these reports still work. This is particularly true of your version 8 reports. Version 9 reports and later should be OK.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Error during installation:"Invalid Eclipse platform version" (have 3.0RC3)

    I saw a new version of bpel designer on otn for download. As I hoped that it would solve my previous problem ('db schema not found') I downloaded and tried to install it.
    Unfortunately I get an error during installation: "Invalid Eclipse platform version". I know that at least version 3 has to be installed. The .eclipseproduct file tells me that it is version 3.0.0. I have downloaded and installed the Eclipse SDK 3.0RC3 version a couple days ago. So it looks like that the version is OK. But I can't get around this error message.
    Any ideas?

    I've downloaded the GA version of Eclipse and it works now.
    During the installations I saw some minor things that I'll share with you:
    - path to the bpel server can be left empty, however there is a '/' already. So you have to chose a directory or delete it before you can go further otherwise an error appears. Maybe it is easier to not have the '/'.
    - I wanted to have the designer and PM in the same directory. But choosing the same dir led to a warning for overwriting the dir. I didn't dare thus now I have 2 dir's. ( 1 for designer and 1 for PM).
    -After installation I don't have entries in 'Start''Programs''oracle' to start the PM. This was also the case with the previous version. I start PM via the 'bat'-files under the PM/bin dir.
    - starting the batch file: startOraBpel.bat starts with an error; "The system cannot find the file C:\WINNT\system32\cmd.exe /e:4096."
    - Last but not least: I hoped that this would solve my re-install problem 'cannot lookup db schema version' but unfortunately that's not the case.

  • Queries related to Redwood Installation / Upgrade to Full version

    Hi All,
    We Need some help.
    We have couple of question related to redwood installation, kindly help us.
    We have SAP Central Process for Scheduling (Redwood 6.0.2.7) basic version installed on our Unix server.
    We are now planning to migrate to the SAP CPS full version and have already procured the license. SAP added the installables at the marketplace under - Installation and upgrades - My Application components - SAP Partner products - SAP CPS Scheduler (Full) after the procurement. We have downloaded the installables now.
    My questions are:
    1. How do we now upgrade the Redwood OEM version to full version? Because, we had mailed to SAP with the OEM license to change it to full version, but then SAP replied to us asking us to send them the full version license. How do I get that? Does this file (register.txt) gets created once we start the installation of Redwood full version? Because we had assumed that by buying the full version license, we would just need to send the OEM license and it would be changed to a full version, but its not so. How do we go about from here. Do we do a new installation and uninstall the basic version?
    2. Also, if we are to do a new installation, how do we get the register.txt file which we need to send to SAP for key generation?
    We are very new to Redwood. Any pointers would be highly appreciated.
    Awaiting your response.
    Thanks in advance.
    Warm Regards
    Rajeet

    SCS stands for central services of SAP NetWeaver AS Java instance, with enqueue and message service.The Central Services run on one physical machine and constitute a Java instance.
    You could get a better response on an appropriate forum,I think.
    You have got quite a lot of threads open .Pls close them if u r fine with replies u have recieved .It would also be nice if you could  go through this
    Must read</b>
    Rgrds
    Vineeth

  • Working with different versions of FCP

    My apologies if this is answered somewhere else but is there any way to work on a newer version of FCP then take that project to an older version?
    We have 5.1 at home but the workplace has 5.0. I'd like to do some work at home and am not sure how take the project back on forth.
    Your help is greatly appreciated.

    Welcome to the forum!
    XML exports and imports will allow you to go back and forth with sequences. But since the crossgrade is so inexpensive, I'd suggest the office buy the latest software, so you don't waste time and effort doing this. I don't think every single aspect of what you do at home will translate completely with XML being the transfer technique.
    There's a fine article written by Philip Hodgetts on the subject here: http://www.kenstone.net/fcphomepage/xmlhodgetts.html
    Jerry

  • Is the latest version of FCP studio compatible with Radeon X1600 graphics..

    I read under the requirements that the latest version of FCP studio is not compatible with "integrated graphics cards"... what does that mean to me with an iMac that has a Radeon X1600 with 128MB and a bus type PCIe? Will it work?
    Thanks!

    Final Cut Studio 2 (with FCP 6) runs just fine on my 2.0 GHz 20" iMac CD, which has a 128 MB ATI Radeon X1600 with an external display (1280x1024) connected via DVI.

  • Academic vs. Retail versions of FCP Express

    Can anyone tell me the differences between the Academic version of FCP Express, and the full function version from retail? I work at a university with Final Cut Studio, and was considering FCP Express for home use.

    Functionally Final Cut Express retail and academic packages are identical.
    The differences are in the licensing. With the Academic Version you cannot:
    1 - upgrade to a new version (say, from FCE4 to a future FCE5) by purchasing a reduced-price Upgrade Package - you would have to purchase a whole new Academic Version
    2 - use the software for any commercial purpose
    But if your question is also the difference between Final Cut Studio and Final Cut Express, the Studio version has more capabiities (Color, Motion, etc). If you are planning to use FCS and FCE together, keep in mind that you can move an FCE Project to Studio but you cannot do the reverse.

  • Working between different versions of FCP

    Hi folks,
    I've seen some posts where this is addressed a bit, but not for the versions of FCP that I'm dealing with so I wanted to see if anyone had any insight.
    I have one of the final generation PowerPC G5s and I got FCP 5.0 (as part of FCS) when I bought the system. Somehow I missed the universal upgrade to 5.1 while it was offered (I know, I know, they offered it for like two years, I have no idea how I missed it) and so I'm maxed out at 5.0.4 because none of the newer version will run on my system.
    At the moment I have a short film I directed and cut in 5.0 and the last bit of work (color correction and dropping in the final auidio mix) was done in 5.1. I'm wondering if there is a way to open that 5.1 project in 5.0 so that I can make some additional changes.
    I've seen posts about exporting XMLs to move projects between 6.0 and 5.1, but I wasn't sure if that worked between only between those two versions
    Is there a similar method to go between 7.0 and early versions if I end up upgrading my machine?
    Any insight would be appreciated.
    Thanks in adavance,
    Avi

    You can use XML to make a version 7 project open as far back as version 4. All you need to do is choose the correct version of XML:
    FCP4 supports XML version 1 only
    FCP5 supports XML versions 1 and 2
    FCP5.1 supports XML versions 1, 2 and 3
    FCP6 supports XML versions 1, 2, 3 and 4
    FCP7 supports XML versions 1, 2, 3, 4 and 5.

  • Add-on installation failed because another version is already installed

    when desinstaler addon, and soon trying to install he himself addon but with a superior version, does not leave. Since it says that it must be a later version, when it is it. There is some site where cleans the registry of addones installed?
    the message is : "Add-on Ficheros de banco: Add-on installation failed because another version is already installed. Ensure that the version number is higher than the version previously installed."

    The best way is to go in Addon-Project Development and in its Bin directory change its exe name.  for example it its exe name is abc.exe then change it to abc1_0.exe
    It will work properly.
    Regards,
    Ganesh

  • I recently downloaded / installed FCP X before reading to NOT install it on a volume containing a previous version of FCP. I installed FCP X in the same Applications folder as FCP v6. I have moved FCP 6 to the trash, but now, should I reinstall FCP X?

    I recently downloaded / installed FCP X into the same folder as a previous version of FCP before reading to NOT do that. I've trashed the older version of FCP, but now what? Has there been damage done? Should I trash FCP X and reinstall it?

    Paulbernard wrote:
    Hi Andy, You say that when installing FCP X the old FCP should move to a new folder called Final Cut Studio. I have just installed FCP X Trial and checked in the applications folders and nothing has changed. Final Cut Pro is where it has always been.
    Hmm. I din't have experience of the trial version - maybe it doesn't move legacy FCP.
    Make a new folder (Final Cut Studio) in the Applications folder, and drag FCP there.
    I have also found that the sound effects in FCP X keep disappearing and I need to re start FCP X for them to appear again. This has happened several times today.
    This could be a case of a conflict with Final Cut Pro. What do you think?
    I doubt it, but FCP X is a fickle application.
    If moving FCP doesn't fix it, post a new topic to ask about this.
    Andy

  • Opening FCP file in an older version of FCP

    I'm trying to open an FCP file sent to me and I'm getting a "General Error (41)" message every time that prevents me from opening the file. I have a feeling it's because the FCP file was created in a newer version of FCP. I'm running FCP 5.0. Is there any way you can save a file in FCP 7.0 (for example) so it can open in FCP 5.0?

    The person who sent you the file has to instead send you an XML file of the project. 5.0 I believe needs an XML 2. When you ask them to do it, make sure that the browser window is selected, and NOTHING in the browser is selected (highlighted.) Otherwise you only get an xml of that one thing.
    If you type xml files into the search window of this forum, you'll find a little chart of the fcp versions and the applicable XML's for each.

  • Does anyone know where I can get a free trial or demo version of FCP

    Does anyone know where I can get a free trial or demo version of FCP?
    Thanks in Advance

    The closest you can get to a demo version is to go by an Apple Store and see if they have it loaded on one of the computers.  In reality, there is no demo or free trial version available from Apple.
    -DH

  • Every time I try to downlaod update to itunes. I receive an error message. any ideas? I want to update my iphone 4 and each time it requires the installation of newest itunes version?

    Every time I try to downlaod update to itunes. I receive an error message. any ideas? I want to update my iphone 4 and each time it requires the installation of newest itunes version?

    i am having the same problem, my error message is that basically it (connection) has timed out! i have tried all day to get it to go thur

Maybe you are looking for