Installation of a Dialog Instance (DI)
Hello,
I am currently installing a HA environment with an SAP ERP 6.0 SR3 System on Windows with MSSQL and MSCluster.
Everything went wll. I am using the SWPM 1.0. The system needs to be non-unicode.
I know that the newer installation are everytime Unicode. Regarding this, I have installed my First Cluster Node, Addition Cluster Node and Central instance as System copy. There, I could select, that I want to have non-unciode. These instances are all running fine.
The problem is now the dialog instance which I install on the second node. Everytime during the installation process, the SWPM is asking for a unicde kernel. I dont know why. Maybe someone from you could help here.
Thanks in advance and best regards,
Hi Steffen,
As per SAP note
860992 - Inst. SAP Systems Based on NW 7.0 incl. EHPs on Win:IBM i
Unicode and Non-Unicode Support
Every new installation of an SAP system is Unicode.
If you install a dialog instance to an existing non-Unicode system (that has been upgraded to the current release), then the dialog instance is installed automatically as a non-Unicode instance. SAPinst determines if a non-Unicode system exists and chooses the right executables for the system type
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
Installation of SAP Dialog Instance on Window for SAP R/3 46C
I am getting following error
Info: R3SAPSYSTEMSERVICE_NT_IND SyCoprocessCreate 2 1002
Creating coprocess E:\usr\sap\DQ1\D10\exe\SAPSTARTSRV.EXE ...
Info: R3SAPSYSTEMSERVICE_NT_IND ExecuteDo 2 1002
Test call to Service failed: 80070006
E_HANDLE: The handle is invalid.
Service not correctly installed.
Info: R3SAPSYSTEMSERVICE_NT_IND ExecuteDo 2 1002
RC code form SyCoprocessWait = -1 .
Error: R3SAPSYSTEMSERVICE_NT_IND ExecuteCheck 2 1002
Exit code from E:\usr\sap\DQ1\D10\exe\SAPSTARTSRV.EXE: -1.
Error: R3SAPSYSTEMSERVICE_NT_IND InternalInstallationDo 2 1002
Phase failed.
Error: R3SAPSYSTEMSERVICE_NT_IND InstallationDo 2 1002
Phase failed.
Error: Main {} 2 1002
Installation aborted.
I will appreciate you help, I have tried installing this with the domain administrator and <sid>adm user, it gave me the same error.
Thanks
Jagraj DhillonThis is as standard support question. An answer should be found in the <a href="http://service.sap.com/notes">SAP Notes</a> System.
please consult SAP Note 142100.
If you can not fix the problem with this note open a message at service.sap.com.
Thank you
Message was edited by: Peter Simon -
New Dialog Instance Installation steps for Solaris
Hi Basis Gurus,
I have doubt regarding installation of a Dialog Instance.
we are having 3 application servers with one DBCI (ECC 6.0 / Oracle 10.2 / Solaris 10). all application server & DBCI are running in Solaris OS in seperate box, now i want install additional new dialog instance in separate server, all the files systems are mounted NTFS under /sapcd.
Please tell how can i start the installation ? which exe file i want to run ?
Please guide me in this regard.
Thanks in Advanc
Kumarasamy.Read the installation guide available at SAP marketplace.
Regards
Juan -
SCM 2007 Dialog Instance Installation on MSCS
Hello everyone,
I have installed SCM 2007 server on MSCS. It is an ABAP stack unicode installation.
I have already fininshed with installations of ASCS, ERS, DB instance, CI as per the installation doc.
My system is up and running on one node. Now I am trying to install dialog instance on the second node. Input parameters,
Database independent programs - Drive G - local - empty on node 2
independent data - Drive M - Shared - already has files created at the time of CI installation.
However, I am getting following error in client s/w installation phase,
starting preparing phase of package Base 7.7.02.08 64 bit
getInstalledReleasesWin(): wrong version format
checking interferences to other packages... ok
collecting data finished:
independent data path: m:/sapdb/data
independent program path: g:/sapdb/programs
start extraction test run of "C:/Dumps/SAP_SCM_2007_liveCache_7_7_02_8_51032921_13/DATA_UNITS/LC_WINDOWS_X86_64/SDBBAS.TGZ"
package Base successfully checked
starting preparing phase of package SQLDBC 7.7.02.08 64 bit
same package already installed
checking consistence of package data in install registry...
check files... failed
G:\sapdb\programs\sdk\sqldbc\incl\SQLDBC.h not found
G:\sapdb\programs\sdk\sqldbc\incl\SQLDBC_C.h not found
G:\sapdb\programs\pgm\libSQLDBC.dll not found
G:\sapdb\programs\bin\sqldbc_cons.exe not found
G:\sapdb\programs\symbols\libSQLDBC_C.pdb not found
G:\sapdb\programs\sdk\sqldbc\lib\libSQLDBC.lib not found
G:\sapdb\programs\sdk\sqldbc\lib\libSQLDBC_C.lib not found
G:\sapdb\programs\sdk\sqldbc\incl\SQLDBC_Types.h not found
G:\sapdb\programs\pgm\libSQLDBC_C.dll not found
G:\sapdb\programs\symbols\libSQLDBC.pdb not found
installed package is corrupted and has to be installed again
cannot do update check - test file "g:/sapdb/programs/pgm/libSQLDBC.dll" not found
installation exited abnormally at Th, May 28, 2009 at 12:40:21
ERROR 2009-05-28 12:40:21.583 [iaxxinscbk.cpp:282]
abortInstallation
MDB-07020 The database installer reported an error. DIAGNOSIS: Some database applications might still be running. SOLUTION: Check the log file sdbinst.log.
Would highly appriciate any help on the above topic.
Regards,
Kiran
P.S: I have only installed SCM server. LC is yet to be installed. This error is encountered during the client installation phase of dialog instance installation.
Edited by: Kiran Pol on May 28, 2009 1:51 PM
Edited by: Kiran Pol on May 28, 2009 1:52 PMHi Ashley,
Thanks for your time.
Since i am installing app server, the SAP<SID> group will have to be online on this node. There is another group containing shared drives for components for livecache. This is also required to be online on node 2 for app server installation.
The only cluster resource I can move back to node 1 is ORACLE<SID>. Tried doing that, but no luck.
Any one here facing similar issue during SCM dialog instance installation in MSCS environment?
Regards,
Kiran -
Error installing Dialog Instance ABAP+JAVA
Hi,
We're having a little issue with installation of a ERP dialog instance. The problem is, when the initial
installation was made, it was a system copy but not in the traditional way, the partner performed a copy
in OS level (cp -rp .... , etc). Once it was finished, renaming of certain this happended.
As we can see, DEV was the initial installation (normal way) but QAS and PRD were copies of DEV ( oracle
schema in PRD is SAPDEV too) this apparently doesn't cause a problem. But now the installer of a dialog
instance stops with this error:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>
(DBConnectionPool.java:115)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>
(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>
(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init
(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>
(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:47)
at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:83)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: The encryption key
(usually in the key file) is not the key that is required to decrypt the data in the secure store file or
the system name (SID) is wrong..
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>
(DBConnectionPool.java:112)
... 11 more
Caused by: com.sap.security.core.server.secstorefs.WrongKeyException: The encryption key (usually in the
key file) is not the key that is required to decrypt the data in the secure store file or the system name
(SID) is wrong.
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:2017)
at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
... 13 more
Caused by: com.sap.security.core.server.secstorefs.InvalidStateException: Internal error during the
decryption process.
at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:850)
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1985)
... 16 more
Caused by: javax.crypto.BadPaddingException: Invalid PKCS#5 padding length: 176
at iaik.security.cipher.s.b(Unknown Source)
at iaik.security.cipher.w.a(Unknown Source)
at iaik.security.cipher.w.engineDoFinal(Unknown Source)
at javax.crypto.Cipher.doFinal(DashoA12275)
at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:825)
... 17 more
Error while connecting to DB.
The error occurs when the installer tries to connect to oracle via jdbc, but the files
SecStore.properties and SecStore.key are from DEV, and they were created with the values of DEV, so when
the installer tries with PRD as central instance name, it doesn't work, how can we recreate this files or
reconfigure the j2ee engine so the installer can connect and finish installation ?
Thanks in advanceExactly, the problem is when the installer tries to execute the following:
/usr/j2se/bin/java -classpath /tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/install/shar
edlib/launcher.jar -Xmx256m -d64 -d64 com.sap.engine.offline.OfflineToolStart co
m.sap.engine.configtool.batch.BatchConfig /usr/sap/PRD/SYS/global/security/lib/t
ools/iaik_jce.jar:/usr/sap/PRD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/
sap/PRD/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/PRD/SYS/global/sec
urity/lib/tools/iaik_ssl.jar:/usr/sap/PRD/SYS/global/security/lib/tools/w3c_http
.jar:/tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/install/lib:/tmp/sapinst_instdir/ERP/
LM/AS/ORA/DI/install/sharedlib:/oracle/client/10x_64/instantclient/ojdbc14.jar /
tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/BatchConfig.xml
The file /tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/BatchConfig.xml has this:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE config [
<!ELEMENT config (dbproperties, task*)>
<!ELEMENT dbproperties (property*)>
<!ELEMENT task (property*)>
<!ATTLIST task name CDATA #REQUIRED>
<!ELEMENT property (#PCDATA)>
<!ATTLIST property key CDATA #REQUIRED>
<!ATTLIST property value CDATA #REQUIRED>
]>
<config>
<dbproperties>
<property key="rdbms.maximum_connections" value="5"/>
<property key="system.name" value="PRD"/>
<property key="secstorefs.keyfile" value="/sapmnt/PRD/global/security/data/S
ecStore.key"/>
<property key="secstorefs.secfile" value="/sapmnt/PRD/global/security/data/S
ecStore.properties"/>
<property key="secstorefs.lib" value="/sapmnt/PRD/global/security/lib"/>
<property key="rdbms.driverLocation" value="/oracle/client/10x_64/instantcli
ent/ojdbc14.jar"/>
<property key="rdbms.connection" value="jdbc/pool/PRD"/>
<property key="rdbms.initial_connections" value="1"/>
As you can see the are values "system.name" with PRD. This cause an error:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:115)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:47)
at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:83)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: The encryption key (usually in the key file) is not the key that is required to decrypt the data in the secure store file or the system name (SID) is wrong..
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:112)
... 11 more
Caused by: com.sap.security.core.server.secstorefs.WrongKeyException: The encryption key (usually in the key file) is not the key that is required to decrypt the data in the secure store file or the system name (SID) is wrong.
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:2017)
at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
... 13 more
Caused by: com.sap.security.core.server.secstorefs.InvalidStateException: Internal error during the decryption process.
at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:850)
at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1985)
... 16 more
Caused by: javax.crypto.BadPaddingException: Invalid PKCS#5 padding length: 176
at iaik.security.cipher.s.b(Unknown Source)
at iaik.security.cipher.w.a(Unknown Source)
at iaik.security.cipher.w.engineDoFinal(Unknown Source)
at javax.crypto.Cipher.doFinal(DashoA12275)
at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:825)
... 17 more
The same as configtool with PRD value.
So can we change the system.name value to PRD and is there a posibility to change the encpytion key so it can be used with PRD value ??
My theory is: The SecStore.key file is used to decript the SecStore.properties but the system.name value plays an important role in decryption, am I right??
Can I regenerate the key with the system.name = PRD so the error solves??
Regards. -
SM51 - no connect to dialog instance
Hi,
we have an Netweaver 7.0 on AIX ( DB2 on z/os ) installation with several dialog instances.
Now we installed an additional dialog instance on Linux ( SLES10 ) for this sap system.
1)
But in TAC SM51 we can see the newly installed sap system on Linux, but we cannot
"jump" to this dialoginstance from SM51.
2) We also have another problem with the shared /sapmnt/SID/global where the db2passwd - file
is located.
We get the Linux instance only running to the AIX CI, when we have an own "db2passwd" for linux und one
for AIX.
Any ideas for this behaviour ?
Kind regards
Andreas LaaserHI,
For your first problem make sure host name and services are maintained properly in both the servers.
Regards, -
Problems in Dialog instance installation for ECC6.0(ABAP+JAVA)
Does anyone can help me what should be a procedure of installing Dialog instance for ECC 6.0 with both ABAP + Java Stacks.
When installing app server do we also choose ABAP and Java or just ABAP. Installation manual does not cover this and when we run the sapinst we have following problem:
<u>The following are the activities that I have done as pre-reqs on the standby on the server that is to host dialog instance</u>
I have mounted the following file systems on ddrsap02. Created the local filesystem /usr/sap/DSP/D00 and NFS mounted the others
/dev/appsaph 5505024 5503856 1% 5 1% /usr/sap/DSP/D00 <b>(is this required or SAPINST should create it itself)</b>
ddrsap00:/stage 419430400 149761708 65% 90835 1% /stage
dprsap01:/sapmnt/DSP 4718592 2888416 39% 12790 2% /sapmnt/DSP
ddrsap12:/usr/sap/trans 2752512 1084932 61% 5107 3% /usr/sap/trans
Then when I run the sapinst from ddrsap02 to install the DI I get the following error
ddrsap02[/tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI]#vi sapinst_dev.log
"sapinst_dev.log" 20516 lines, 641048 characters
TRACE
Running with toplevel file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/toplevel.xml
Running with dialog file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/dialog.xml
Running with keydb file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/keydb.xml
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaejs701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iacdlib701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaccdlib.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iapasswdman701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
This is SAPinst, version 701, make variant 700_REL, build 817256
compiled on Mar 14 2006, 23:39:26
TRACE [syxxsyshlp.cpp:175]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.397528.1170221882/sapinstexe
SAPINST_EXE_DIR = /tmp/sapinst_exe.397528.1170221882
LANG = en_US
LOGIN = root
PATH = /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
SAPINST_EXEDIR_CD = /stage/51031797/IM_AIX_PPC64/.
LC__FASTMSG = true
WINDOWID = 8388621
"sapinst_dev.log" 20516 lines, 641048 characters
EJS_Installer::writeTraceToLogBook()
2007-01-31 09:42:48.898 NWDB.getDBHost() done: undefined
<i><b>ERROR 2007-01-31 09:42:48 [iaxxinscbk.cpp:271]
abortInstallation
CJS-00030 Assertion failed: in getSidFromProfiles: Variable dbHost should be defined</b></i>
TRACE [iaxxejsbas.hpp:388]
handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2007-01-31 09:42:48
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-01-31 09:42:48
FCO-00011 The step assertDBInfo with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|assertDBInfo was executed with status ERROR .
<html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 1 > SAP Systems > Oracle > High-Availability System > Base
d on AS ABAP and AS Java > Dialog Instance</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button
to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/ERP/SYST
EM/ORA/HA/ABAPJAVA/DI</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
Am I missing some pre-reqs or variable definitions?
I was going through the documentation and it says that /sapmnt/DSP/exe should be a local filesystem for a DI on a separate server. Will this create a problem ?
Also they talk about starting sapinst with the variable SAPINST_USE_HOSTNAME set to ddrsap02. I have tried this also
We are also not 100% sure about the settings for parameters:
rdisp/mssserv
rdisp/mssserv_internal
Accorss Devault Instance and Services Instance profile.
When we define it as per installation GUIDE (Abap+Java page 64) we get the popup message in SAPINST:
<b><html>Profile parameter <em>rdisp/msserv_internal</em> is not set for instance DVEBMGS01/DSP on host dprsap01.<p>You have to set the parameter in the default profile and restart the instance.<p>For further information refer to SAP Note 821875.</html></b>
Other errors follow shortly.
Any help would be appreciatedHi ,
are you able to resolve this error :Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.
You have to set the parameter in the default profile and restart the instance.
For further information refer to SAP Note 821875.</html>
? if yes , pls let me know , I am stuck with same issue while installing dialog instance .
Thanks
Hamendra -
SAP Dialog Instance Installation.
Hi
Installation of ABAP System ECC6.0
I am trying to install another application server(Dialog Instance) on
different host. My both System Central(main server) and Dialog system in
same domain. I am installing SAP Server as a Local Installation.
I am able to installed Dialog Instance on same Host of Central System. But
when I was trying to installation it on different Host, I got error on
u201CStart Dialog Instanceu201D step that is last step it cant able to start Dialog
Instance.
Can you please tell me the Prerequisite for this type of setup as well as
any other Setting related to u201Chostsu201D and u201Cservicesu201Dfile ? and also central system
side settings.
Following Error is occurred :
u201CCopy Errors detected.................: 0
Sync Errors detected.................: 0
Warnings detected....................: 0
INFO 2008-11-21 13:14:39
Execute step createOsCol of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:40
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(SAPOsCol).
INFO 2008-11-21 13:14:41
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove SAPOsCol
is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove SAPOsCol" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:41
The 'SAPOsCol' service on the 'Local' machine was created successfully.
INFO 2008-11-21 13:14:45
The service 'SAPOsCol' started successfully on host 'Local'.
INFO 2008-11-21 13:14:46
Execute step createService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:14:46
Creating SAP start service of instance PT6/D02...
INFO 2008-11-21 13:14:47
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\sapstartsrv.exe.log.
INFO 2008-11-21 13:14:47
Output of D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm is written to the
logfile sapstartsrv.exe.log.
INFO 2008-11-21 13:14:53
Execution of the command "D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm" finished with return
code 0. Output:
Service succesfully installed.
INFO 2008-11-21 13:14:53
Execute step setServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO[E] 2008-11-21 13:14:58
FSL-01027 Account user="I3976vm2\SAP_PT6_LocalAdmin" does not exist.
INFO 2008-11-21 13:14:58
Successfully set '(S-1-5-21-134454618-3270849815-193169279-1011, NONE, + |
SERVICE_START | SERVICE_STOP)(S-1-5-18, NONE, +o | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL |
SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE
| WRITE_DAC | WRITE_OWNER)(S-1-5-4, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-6, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-11, NONE, + | SERVICE_USER_DEFINED_CONTROL)(S-
1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-21-134454618-3270849815-193169279-1009, NONE, +
| DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service
I3976vm2\SAPPT6_02' on computer 'I3976vm2'.
INFO 2008-11-21 13:14:58
Execute step createCCMSService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:58
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(sapccmsr.02).
INFO 2008-11-21 13:14:59
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove
sapccmsr.02 is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove sapccmsr.02" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:59
Execute step setCCMSServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:00
Execute step registerEventsDLL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step setICMBndPermissions of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step copyRFCExecSec of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:10
Copied file '
i3643vm/sapmnt/PT6/SYS/exe/uc/NTI386/rfcexec.sec' to
'D:/usr/sap/PT6/D02/work'.
INFO 2008-11-21 13:15:11
Execute step callSetDB4PWD of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step unpackJ2EEINSTALL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step runBatchconfig of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step removeTempDirectory of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Execute step start of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Starting instance PT6/DVEBMGS00...
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Starting instance PT6/D02...
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:35
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\stop_PT6_D02.log.
INFO 2008-11-21 13:15:35
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile stop_PT6_D02.log.
INFO 2008-11-21 13:15:43
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe
name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code 0. Output:
STOPSAP executed succesfully
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:48
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\start_PT6_D02.log.
INFO 2008-11-21 13:15:48
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\startsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile start_PT6_D02.log.
INFO 2008-11-21 13:16:21
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386
\startsap.exe name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code
0. Output:
STARTSAP continues...
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:22
State of instance PT6/D02 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:24
State of instance PT6/D02 changed from ABAP: STARTING to ABAP: STARTING.
ERROR 2008-11-21 13:17:24
CJS-30105 Instance PT6/D02 reached state UNKNOWN after having state
STARTING. Giving up.
ERROR 2008-11-21 13:17:24
FCO-00011 The step start with step key
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|start was
executed with status ERROR .
Thanks in advance.
Regards
ManojHi, I'm Josephine and I almost have the same scenario as this problem reported earlier but it's just that we are using SAP Netweaver 04 SR1.
However, I'm installing additional SAP Application server to our existing one.
Our existing main server is in MS cluster. SAPPRD1 (DB Server in node A) and SAPPRD2 (SAP App Server in node B). System ID is PRD and the CI Instance number is 00. The hostname where the USR folder is SAPPRD (hostname in the cluster environment but this is the SAPPRD2 server in node B).
Now I'm installing additional SAP App server into a new host (SAPPRD3 & SAPPRD4) they are all in the same domain.
But I would like to install the 2nd and 3rd SAP App server in a local host.
While installing there was an error "Output: Service not started" the process "Create or reregister services" during the installation stopped.
I used the installer under the folder InstMaster\IM01_NT_I386\SAPINST\NT\I386\sapinst.exe and run the Dialog Instance under the SAP Netweaver\ABAP System\MS SQL Server\Unicode\.
This is the part of the sapinst log where the error starts:
PHASE 2009-01-28 08:39:29
Preparing DBMS-specific profile parameters
INFO 2009-01-28 08:39:30
Adapt operation t_SAPComponent_Profiles_SHARED processed successfully.
PHASE 2009-01-28 08:39:31
Handle services
INFO 2009-01-28 08:39:32
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_MSS_UC\DI\sapstartsrv.exe.log.
INFO 2009-01-28 08:39:32
Output of C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm' is written to the logfile sapstartsrv.exe.log.
WARNING 2009-01-28 08:39:35
Execution of the command "C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm'" finished with return code -1. Output: Service not started.
ERROR 2009-01-28 08:39:35
MOS-01011 'C:\usr\sap\PRD\D02\exe/sapstartsrv.exe' returned with '-1'.
Please help me on this I can't successfully install another dialog instance to add to our existing one now.
Thank you and hoping for your reply.
Yours truly,
Josephine Dejolde -
Automatic shutdown of SAP Instance after installation of Dialog Instance
Hi all,
We've upgraded our system from SAP4.6C to ECC6.0 running on Win2003 64 bits Oracle 10g.
After upgrade, we installed Dialog instance (this dialog instance is running outside MS cluster) and it is running on Microsoft cluster. When we try to start up SAP dialog instance, the system is started but it automatically shuts down again.
Below are the trace for DEV_DISP
=============================
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid P02
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 3216
Wed Nov 22 12:32:40 2006
kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 3216) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Nov 22 12:32:51 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0091.qqq.nxst) took 11 seconds
Wed Nov 22 12:33:08 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >AP2_P02_03 <
DpShMCreate: sizeof(wp_adm) 5376 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007DA0050, size: 5314128)
DpShMCreate: allocated sys_adm at 0000000007DA0050
DpShMCreate: allocated wp_adm at 0000000007DA1AB0
DpShMCreate: allocated tm_adm_list at 0000000007DA2FB0
DpShMCreate: allocated tm_adm at 0000000007DA3010
DpShMCreate: allocated wp_ca_adm at 00000000082157B0
DpShMCreate: allocated appc_ca_adm at 0000000008219E00
DpShMCreate: allocated comm_adm at 000000000821B570
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000082A21F0
DpShMCreate: allocated gw_adm at 00000000082A2270
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000082A22A0
DpShMCreate: allocated wall_adm at 00000000082A22B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Wed Nov 22 12:33:09 2006
***LOG Q0K=> DpMsAttach, mscon ( SAPGRPP02) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >AP2_P02_03 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
Wed Nov 22 12:33:49 2006
ERROR => W0 (pid 1100) died [dpxxdisp.c 14241]
ERROR => W1 (pid 1112) died [dpxxdisp.c 14241]
ERROR => W2 (pid 1856) died [dpxxdisp.c 14241]
ERROR => W3 (pid 576) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x99 --> 0x98
ERROR => W4 (pid 1368) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W5 (pid 1108) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:33:59 2006
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Nov 22 04:33:59 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1100 Ended no 1 0 0
1 DIA 1112 Ended no 1 0 0
2 DIA 1856 Ended no 1 0 0
3 DIA 576 Ended no 1 0 0
4 BTC 1368 Ended no 1 0 0
5 SPO 1108 Ended no 1 0 0
Dispatcher Queue Statistics Wed Nov 22 04:33:59 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Nov 22 04:33:59 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Nov 22 04:33:59 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:04 2006
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >AP2_P02_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1096) (SOFT_KILL)
Stop icman
killing process (748) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1096 HANDLE:536)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:05 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1096 HANDLE:536)
wait for end of icman
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:06 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:07 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:08 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:09 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:10 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:11 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:12 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:13 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:14 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:15 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:16 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:748 HANDLE:544)
DpStartStopMsg: send stop message (myname is >AP2_P02_03 <)
NiIMyHostName: hostname = 'AP2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Nov 22 12:34:17 2006
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 548 (pos=2)
SiSelNRemove: removed sock 548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/6
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3216) [dpxxdisp.c 10259]
Good Bye .....
Below is the trace for DEV_W0
==========================
M patchno 75
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 1100
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1100) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 5376 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5314128)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA2FB0
M DpShMCreate: allocated tm_adm at 000000000DDA3010
M DpShMCreate: allocated wp_ca_adm at 000000000E2157B0
M DpShMCreate: allocated appc_ca_adm at 000000000E219E00
M DpShMCreate: allocated comm_adm at 000000000E21B570
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A21F0
M DpShMCreate: allocated gw_adm at 000000000E2A2270
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A22A0
M DpShMCreate: allocated wall_adm at 000000000E2A22B0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host AP2
M
M Wed Nov 22 12:33:10 2006
M calling db_connect ...
C Prepending E:\usr\sap\P02\D03\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c 432]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App : disp+work.EXE (pid=1100)
When : 11/22/2006 12:33:14.515
Threads : 2
Computer Name : AP2
User Name : SAPServiceP02
Number of Processors: 4
Processor Type: EM64T Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 440
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000678f720 00000000078488ca 0000000000000003 kernel32!PulseEvent
000000000678f7f0 0000000007847fe6 0000000007926000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
000000000678f860 00000000078136cd 000000000678f8b0 dboraslib!_tailMerge_OCI_dll
000000000678f8c0 000000000782f3d8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2766)]
000000000678fa90 0000000001182107 000000000678fd80 dboraslib!DbSlConnect [dbsloci.c (1835)]
000000000678fce0 000000000118251e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
000000000678fd50 00000000011856de 00000000ffffffff disp+work!supply_con [dbcon.c (3830)]
000000000678fd90 000000000117826c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
000000000678fdf0 00000000004ca16a 000000000755476c disp+work!db_connect [dblink.c (422)]
000000000678fe80 00000000004cf609 0000000006d6bdfd disp+work!ThInit [thxxhead.c (1404)]
000000000678feb0 000000000042c9e6 ffffffff00000002 disp+work!ThStart [thxxhead.c (1114)]
000000000678fee0 0000000000401097 ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1119)]
000000000678ff10 00000000018919c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (82)]
000000000678ff70 0000000078d5965c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
000000000678ffa0 0000000000000000 0000000001891850 kernel32!BaseProcessStart
State Dump for Thread Id c70
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000bd9fe40 0000000078d5f611 0000000006d31460 ntdll!NtFsControlFile
000000000bd9feb0 000000000178a99f 0000000000000000 kernel32!ConnectNamedPipe
000000000bd9ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (595)]
000000000bd9ff70 0000000078d6b66a 0000000078d6b630 msvcrt!endthreadex
000000000bd9ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Wed Nov 22 12:33:15 2006
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server AP2_P02_03 on host AP2 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Wed Nov 22 12:33:15 2006
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1100) [dpnttool.c 327]
M return from clean-up function ...
Does anybody has a solution for this problem?
Thank you.Hi all again,
I had the same problem and found a solution for it.
I made two steps to start the dialog instance successful. First I modified the NLS_LANG setting in the registry and enviroment (only if necessary). Second, I fetched the last Oracle Instant Client <b>OCL10264.sar</b> from SAP Net and extract the file to <b>E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64</b> (This directory was created through the Installer. The Kernel lies under <b>E:\usr\sap\PDV\D20\exe</b>)
Now I changed the variable <b>DIR_CLIENT_ORAHOME = $(DIR_EXECUTABLE)</b> to
<b>DIR_CLIENT_ORAHOME = E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64</b> in the Instance Profile of the new Dialog Instance. So the Kernel knows that he has to use the Oracle Instance Client and the profilevariable says where he found it.
After these modifications the Dialog Instance starts with success.
With kind regards
Thomas Espenhain -
SCM Dialog instance installation, post installation activity for livecache
Hi All,
We have installed SCM 7.0 Central instance with Livecache server. Now we have successfully installed additional application server (i.e. Dialog instance) for this SCM 7.0 system.
We need to know
After installation of SCM 7.0 Dialog instance what are the post installation activities?
How we should integrate the livecache server with the Dialog instance which is installed on different hardware.
We need to know how livecache server understand that the additonal application server ? Is there anything to do in LC10?
Please reply
ThanksHi Ashley,
Thanks for your time.
Since i am installing app server, the SAP<SID> group will have to be online on this node. There is another group containing shared drives for components for livecache. This is also required to be online on node 2 for app server installation.
The only cluster resource I can move back to node 1 is ORACLE<SID>. Tried doing that, but no luck.
Any one here facing similar issue during SCM dialog instance installation in MSCS environment?
Regards,
Kiran -
Dialog Instance installation error - rdisp/msserv_no not possible
Dear All,
While trying to install a DI I am getting the following error:
An error occurred while processing service SAP CRM 5.0 Support Release 3 > Software Life-Cycle Options > Application Server > MS SQL Server > Dialog Instance( Last error reported by the step :Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CRM05/LM/AS/MSS/DI.
The log says the following:
INFO 2009-07-20 05:21:54.298
Disconnect from message server (UT1VC7P01/3901) succeeded.
ERROR 2009-07-20 05:21:54.298
CJS-00030 Assertion failed: in getMsPort() rdisp/msserv_no not possible. You need a newer message server.
ERROR 2009-07-20 05:21:54.376
MUT-03025 Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..
ERROR 2009-07-20 05:21:54.470
FCO-00011 The step getMsPort with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_checkMsgServer|ind|ind|ind|ind|2|0|getMsPort was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..).
Please share your views on what could be missing here.
Thanks a lot for your help and time,
ShivalHi,
Interestingly enough the installation went through by restoring the original kernel files, i.e. kernel fils as soon as the CI installation was completed.
I have upgraded kernel on CI now and am facing another issue of "Dialong Queue info Unavailable".
Not sure if I should open up a new thread for it.
Please let me know your views/ideas on the above.
Thanks a lot for your help and time,
Shival -
Dialog Instance Installation - Error while connecting to DB
Hi All,
We have installed a WAS 640 SP15 and successfully running a Portal EP6.0 (SP15) on the same. Now, we wish to install a dialog instance on the same for load balancing the Portal on the same Hardware/Server.
During the DI installation in the phase "Configuring J2EE Engine", the installation fails with the error "Error while connecting to DB".
I tried to restart the installation by replacing the JDBC and OS_LIB of the new instance with the JDBC and OS_LIB of the already running CI instance but it didnt help either.
Any pointers in this direction will be appreciated.
Thank you!!
Regards,
AbhijeetWe have the same issue. We have a NW04 SP19 J2EE standalone WAS and are using the SP19 SAPINST to add a second dialog instance on the same host as the central instance.
We restarted the Oracle listener ... to no avail
The error in the Oracle batchconfig log is given below.
Thanks for any insight that you can provide.
Cheers .... Bart
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection
(DBConnectionPool.java:360)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>
(PersistenceHandler.java:38) -
Dialog Instance installation - Error u0093Service Not Started u0093
Hi All,
We are facing some issues while installing Dialog Instance on Windows 2003 server. Please help me on this...
Below are the Central Instance Details:
SAP Component Version: SAP NetWeaver 2004s
Basis Release: 700
Kernel Release : 700
Patch Level : 111
Operating System: AIX 5.2
Database : Oracle 10.2.0
Central Instance host: centralhost
SID : CID
Dialog Instance Details:
SAP Component Version: SAP NetWeaver 2004s
Operating System: Windows 2003 Server(SP2 32 Bit)
Dialog Instance host: dialoghost
Instance No: 02
In Step 8 of installation, we are getting error Service Not Started
sapinst.log file content :-
INFO 2008-02-18 03:46:44
Creating SAP start service of instance CID/D02...
INFO 2008-02-18 03:46:45
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\AS\ORA\DI\sapstartsrv.exe.log.
INFO 2008-02-18 03:46:45
Output of D:\usr\sap\CID\D02\exe\sapstartsrv.exe -r -q -p
centralhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST -s CID -n 02 -U DIALOGHOST\SAPServiceCID -P XXXXXX -e DIALOGHOST\cidadm is written to the logfile sapstartsrv.exe.log.
WARNING 2008-02-18 03:46:51
Execution of the command "D:\usr\sap\CID\D02\exe\sapstartsrv.exe -r -q -p
centralhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST -s CID -n 02 -U DIALOGHOST\SAPServiceCID -P XXXXXX -e DIALOGHOST\cidadm" finished with return code -1. Output:
Service not started.
ERROR 2008-02-18 03:46:52
MOS-01011 'D:/usr/sap/CID/D02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2008-02-18 03:46:52
MOS-01011 'D:/usr/sap/CID/D02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2008-02-18 03:46:52
FCO-00011 The step createService with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
Service User SAPSERVICECID is aligned to administrator group.
And when we tried to start the windows service (SAPCID_02) we got below message
"The SAPCID_02 service on Local computer Started and then stopped. Some Services stop automatoically,if they have no work to do, for example , the performane logs and Alert service"
Please help me on this..
Thanks..
PreethishHi Haynes,
From windows machine we can access the Dilaog instance profile.
Path to executable in SAPCID_02 service is "D:\usr\sap\CID\D02\exe\sapstartsrv.exe" pf="
centalhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST"
On Cental Instance( AIX machine) :-
CI profiles are in " /sapmnt/CID/profile " path
and DI profiles are in " /sapmnt/CID/SYS/profile " path
centralhost:cidadm 2> cd /sapmnt/CID/profile
centralhost:cidadm 3> ls -l
total 64
-rw-rr 1 CIDadm sapsys 4958 Feb 12 20:40 CID_DVEBMGS00_CENTRALHOST
-rw-rr 1 CIDadm sapsys 2272 Feb 12 18:39 DEFAULT.PFL
-rw-rr 1 CIDadm sapsys 3826 Nov 20 02:25 START_DVEBMGS00_CENTRALHOST
drwxr-xr-x 2 CIDadm sapsys 256 Nov 02 02:23 oracle
centralhost:cidadm 4> cd /sapmnt/CID/SYS/profile
centralhost:cidadm 5> ls -l
total 40
-rwxrr 1 CIDadm sapsys 303 Feb 17 19:40 CID_D02_DIALOGHOST
-rwxrr 1 CIDadm sapsys 2307 Feb 14 09:43 DEFAULT.PFL
-rwxrr 1 CIDadm sapsys 1013 Feb 17 19:40 START_D02_DIALOGHOST
drwxr-xr-x 2 CIDadm sapsys 256 Feb 14 14:06 oracle
centralhost:CIDadm 6> -
Hi,
At the time of SAP installation of Dialog instance at 1st step choose
service
after selecting option second, when we continue with it we are getting
following error.
"An error occurred while processing service
SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options >
Application Server > Oracle > Dialog Instance( Last error reported by
the step :The
subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kzwzinn'
does not exist on the 'localhost' host.)."
error log file has been attached with call for your refernce.
we are installing SAP Netweaver 7.0 support relase 3.
The sapinst log is as below :
INFO 2009-05-07 00:32:00.933
Execute step collect of component |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind|ind|ind|0|0
WARNING 2009-05-07 00:32:01.277
Error 5 (Access is denied.)
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\kzwzinn).
WARNING 2009-05-07 00:32:01.277
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kzwzinn' does not exist on the 'localhost' host.
ERROR 2009-05-07 00:32:01.324
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kzwzinn' does not exist on the 'localhost' host.
ERROR 2009-05-07 00:32:01.339
FCO-00011 The step collect with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind|ind|ind|0|0|collect was executed with status ERROR ( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kzwzinn' does not exist on the 'localhost' host.).
INFO 2009-05-07 00:35:29.628
An error occured and the user decide to stop.\n Current step "|NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind|ind|ind|0|0|collect"..
The permissions are properly set for the registery.
Kindly suggest.
Thanks in advance.
Regards,
Rahul.Then you use the Local or Domain installation ? I'm think second ...
First of all do not use <sapsid>adm for the installation,
second, if you use domain installation :
you need read the instguide more clearly :
Required User Authorization for the Installation
Domain Installation
and the
Performing a Domain Installation without being a Domain Administrator
try to read in installation guide.
Regards. -
Dialog instance installation on AIX
Hi,
I am palnning to install Dialog instance of ECC5.0 with oracle database on AIX5.3
OS.
I am having some queries.
1: what file system is requied for dialog instance on AIX ( both for oracle and application)
2: whether /sapmnt and /usr/sap/trans I have to make as NFS or not.
3: whether oracle client installation it will ask in between of dialog installation if not then when it will ask.
4: What about oracle patch installation.
Please reply its urgent.
Thanks
Manoj01. Yes
Only 3 Mounts you require ( assuming local Kernel Upgrade)
/usr/sap/trans
/sapmnt/<SID>/global
/sapmnt/<SID>/profile
02. Please check 1st Point answer
03. NW2004s demands for Oracle Client installation cd. check in NW2004.
04. Patch is for Oracle Server ( not for client)
Rgds
PR
Maybe you are looking for
-
I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f
-
My iPhone was stolen and I have lost all my photos as some were over 30 days old. Is there anyway I can get these back as they were on iCloud originally but i didn't put them onto my pc! :o( please can somebody help me get these back.
-
Import splitting into hundreds of .3 second clips!
We have a Panasonic PV-D400D, and iMovie's last few versions have erroneously imported all video as tons of little .3 second clips. The way we got around this was to import as one single clip, not using the auto clip thing in iMovie. However, it look
-
WSR not coming as per requirement
Hi gurus, i wish to create WSR as 0112233 say Weekly off 1st shift 2 nd shift and 3 rd shift in the pattern 0112233 when i am defninig the schedules it is creating but if i am assign to an employee then it will start the day with 2nd shift instead of
-
Hi Experts, I have two output types and the output type 2 should only trigger if the output type 1 has processed. we have coded in a routine in transation V/27 , and attached it to output type "ZWMA". As per the logic In the routine we are checkin