Installation of Additional Application Server

Dear Gurus,
We are running on ECC6 SR2, Oracle 10g and AIX 5.3 and our HW (IBM) was desgined for 60 users and since 3 months now we have increased our user strenght to 115 users for which our server is not able to take the load.
So we have decided for a Dialog instance and our new server is as follows
HP GL380 series server ,
6GB RAM,
2 x 146 gb HDD,
Windows 2003 Server with SP2
Now my question is that can we have our Dialog instance on Windows while our Central Instance is running on AIX?
How can i divert 30-40 users to the new dialog instance?
And is there any easy install document for this procedure?
Kindly help me as this is my first time activity.
Thanks and regards
Hari Haran.V

Hi,
>you can't have central and dialog instances on different platforms
This is wrong : it is possible !
It is perfectly possible to have the CI on AIX and the dialog instances on Windows.
You just need a shared directory between them which means, usually, SAMBA on AIX.
The specific programs (especially interface programs) have to be aware of this. For exemple, it is need to define logical paths with transaction FILE, with physical paths both for windows and Unix.
Regards,
Olivier

Similar Messages

Error on installing Additional Application Server Instance on HA system

Dear All,
We're installing NW 7.3 High Availability System in our landscape, sucessfully we installed First Cluster Node, Database Instance, Additional Cluster Node and Primary Application Server Instance. But during the Additional Application Server instance installation we're facing some issue. Could you any help us on the below issue.
server0 was unable to start, fails due "2150(core service start fails on initial startup)"
developer trace log:
Cannot connect to cluster node [15567050] host [/169.254.1.108:50120] for [0] millis
[EXCEPTION]
java.io.IOException: Connection closed because handshake timeout. p2p.connect.handshake.timeout = 10000
     at com.sap.engine.core.cluster.impl6.p2pnio.HandShaker$TimeoutRunner.transferred(HandShaker.java:454)
     at com.sap.engine.core.cluster.impl6.p2pnio.HandShaker$TimeoutRunner.access$200(HandShaker.java:421)
     at com.sap.engine.core.cluster.impl6.p2pnio.HandShaker.connect(HandShaker.java:209)
     at com.sap.engine.core.cluster.impl6.p2pnio.ConnectionHolder.connect(ConnectionHolder.java:125)
     at com.sap.engine.core.cluster.impl6.p2pnio.ConnectionHolder.access$100(ConnectionHolder.java:41)
     at com.sap.engine.core.cluster.impl6.p2pnio.ConnectionHolder$1.run(ConnectionHolder.java:92)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
#2.0 #2011 09 03 15:11:43:268#+0300#Warning#com.sap.engine.core.cluster.impl6.p2pnio.ConnectionHolder#
com.sap.ASJ.krn_clu.000105#BC-JAS-COR-CLS#kernel.sda#C000A9FE025B00030000000100003338#
15566950000000021##com.sap.engine.core.cluster.impl6.p2pnio.ConnectionHolder#####d646643ad62511e083abf6ed20524153##0#ClusterP2P#Plain##
Cannot connect to cluster node [15567050] host [/169.254.1.108:50120] for [1000] millis
[EXCEPTION]
java.io.IOException: Connection closed because handshake timeout. p2p.connect.handshake.timeout = 10000
     at com.sap.engine.core.cluster.impl6.p2pnio.HandShaker$TimeoutRunner.transferred(HandShaker.java:454)
     at com.sap.engine.core.cluster.impl6.p2pnio.HandShaker$TimeoutRunner.access$200(HandShaker.java:421)
     at com.sap.engine.core.cluster.impl6.p2pnio.HandShaker.connect(HandShaker.java:209)
     at com.sap.engine.core.cluster.impl6.p2pnio.ConnectionHolder.connect(ConnectionHolder.java:125)
     at com.sap.engine.core.cluster.impl6.p2pnio.ConnectionHolder.access$100(ConnectionHolder.java:41)
     at com.sap.engine.core.cluster.impl6.p2pnio.ConnectionHolder$1.run(ConnectionHolder.java:92)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
Could anyone help us.
regards,
Guna

HI,
Thanks for your reply.
You're right, if the installation unable to create the user and folder in the node2 means... your suggestion is applicable but I crossed those phase... I'm in the phase of "Install Instance basics of J01".
Do you need to do the copy and paste method, eventhough we're in Install Instance basics of J01 phase.
suggest...
regards,
Guna

Install additional application server for existing CE7.11 system

Hello Gurus,
We have an existing CE 7.11 system installed. After installation, we have updated the SPS level to 04 recently. The CE 7.11 system is already part of a NWDI track configuration since many months and developers are already using since then.
Now, we need to install an additional application server (dialog instance) for the same system.
I want to know: Do I need to carry out any further post-installation steps after installation of the new app server?
Does it matter that the system is already at a certain SPS level including an updated kernel? Will there be any issues at all?
Basically, what else should I do after the installation of the app server is completed?
Thanks and Regards,
Shitij

Question got repeated by mistake.

Install additional application server for existing CE 7.11 system

Hello Gurus,
We have an existing CE 7.11 system installed. After installation, we have updated the SPS level to 04 recently. The CE 7.11 system is already part of a NWDI track configuration since many months and developers are already using since then.
Now, we need to install an additional application server (dialog instance) for the same system.
I want to know: Do I need to carry out any further post-installation steps after installation of the new app server?
Does it matter that the system is already at a certain SPS level including an updated kernel? Will there be any issues at all?
Basically, what else should I do after the installation of the app server is completed?
Thanks and Regards,
Shitij

Question got repeated by mistake.

Hyperion planning installation(Problem with application server deployment)

Hi There:
I am new to hyperion planning.I am trying to install planning.I got problem with Hyperion Configuration utility while configuring application server deployment.Its show message failed.Please guide me how to fix this.If it is possible can you please send me any personal documentation on installation.I am trying this for past 4 day's.Below is the error its showing in configtool
     ... 10 more
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, INFO, Validating dependencies...
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel$5, DEBUG, Product: Planning; Dependencies: []
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: HspDBPropertyLocation
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: applicationServerDeployment
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.PanelEventDispatcher, DEBUG, constructor
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryEnter
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebLogic 8.1; deployment type = both
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebSphere 5.1; deployment type = both
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5.0.28; deployment type = both
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryExit
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, DEBUG, AppServer selected: WebLogic 8.1
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.ProductCustomInputPanel, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryEnter(ProductCustomInputPanel.java:88)
     at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.Wizard$RunThread.run(Unknown Source)
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Starting WebLogic 8.1 deployment...
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, pre-Deploy: Planning
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Deploy: Planning
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.cis.config.AppServerDeployer.initContexts(AppServerDeployer.java:628)
     at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:548)
     at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:526)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:251)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Mar 09, 2008, 08:26:13 PM), com.hyperion.cis.config.wizard.CustomSummaryPanel, DEBUG, CustomSummaryPanel in queryExit
Please help me.Email id:[email protected]
Thanks
Harsha.
Message was edited by:
user603943

I think the installation of planning on Vista is difficult. As some of the files doesn't support even i am tired of doing that.
But tell me one thing have you installed all other products , I mean Essbase, (server, client) , AAS and Shared services.
Are they working good .
I have formatted my system to XP and installed everything , but the problem is when i install planning it prompts me that IIS 5 should be greater other wise EPM will not install...
there are lot of things with planning 1) i can't datasource as it is not highlighting when we configure with Shared services
2) It does not create product instance .
If any one can fix this thing by giving me a suggestions.
Advance Thanks

BPEL Server installation on JBOSS application Server on SUN SOLARIS

I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?

Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected]

Error on the installation of Web Application Server Java 6.40 SP9 on my PC

Hi, All,
I got the following error when I try to install Web Application Server Java 6.40 SP9 on my laptop using the CD that comes with the Book 'Java Programming with the SAP Web Application Server'. I'm currently using window XP.
The installation failed on the 3rd step 'SAP System Installation'.
I logged on my laptop as my own userid, but I should have the administrator's rights.
ERROR 2007-05-15 15:43:10
FSL-00001 System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'LoadUserProfile' with parameter (thread token for IT-899\j2eadm, j2eadm), line (616) in file (synxccuren.cpp).
Do you have any ideas what it means? Any inputs would be greatly appreciated.
Joanna

Thank you all for your replies. I downloaded the newest version of Netweaver from the SAP website and got it installed successuflly. Points rewarded...Thanks.
Joanna

Installation of Oracle Application Server and Oracle forms 10g

I am currently using form 6i and Oracle 10g in my home. but i want to
Install and setup Forms 10g on my Pentium IV PC with oracle Application server 10g.
I need the issues in this installation and I want Proper steps and Software and hardware Requirement for Implement my oracle forms on web.

You can download the documentation from otn.oracle.com or if u have dvd/cd
then installation guide will be there inside the dvd/cd
Rajesh

Problems in Installation of 9iAS Application Server

I've downloaded 9iAS Application Server & trying to load on Microsoft Windows 2000 Professional Edition, Intel Pentium III processor, with 256MB RAM.
After clicking to the Setup.Exe, Oracle Universal Installer appears on the screen. Then when I press NEXT, it gets hanged & is not responding.
When I am trying to load another Oracle Universal Installer, it gives
following error message alert:
jrew.exe - Application Error
The instruction at "0x6ee33c57 referenced memory at "0x00000000". The memory
could not be "read".
Click on OK to terminate the program.
Click on CANCEL to debug the program.
Awaiting an early favourable responce.
null

Bidhin,
Abandon any thoughts of installing 1.0.2.2 version from download. Oracle will not support it anyway. I just found this out this morning. The install is suspect anyway as I have had numerous problems, an install of 1.0.2.0.0 works fine.
Hopefully Oracle will pull the 1.0.2.2 version from release as it will not work.
null

Additional Application Server on SAP R/3 4.7

Hello Guru's,
We are running on SAP R/3 4.7 ext 2.0 with Oracle 9.2.0.4 on Solaris 5.9 OS. We are having separate Application Server and DB server installed. Now I want to add one more application server on Windows Server which will communicate with my existing DB Server. Will it be possible to implement this scenario. Can anyone provide me kind help to proceed further?
Thanks in Advance,
Kshitiz Goyal
BASIS Administrator

Hi Kshitiz,
It is supported.
Check the following notes:
80266 - Installing NT Applicn. Servers in UNIX Environment.
680617 - INST: Appl.Server in Heterogeneous SAP System
You also need to use SAMBA in order to share the transport and profile directories between Unix and Windows - SAP notes 28781 & 97993
Regards,
Nahum

Oracle AS adapter 10g R3 installation on clusters Application server

Hi,
I want documentations or steps for installing oracle AS adpater 10R3 on oc4j application server(clustered).
Existing components:
Oracle AS server in clustered mode
Oracle SOA Suite 10.1.3.5
Over this I want to install oracle AS adapter.I have few queries
1.Do I have to install AS adapter separately on each node of the cluster?
2. Is there any specific steps that need to be followed why installing AS adapter in clustered environment.
Thanks in advance
Regards,
Tharanath

1.Do I have to install AS adapter separately on each node of the cluster?
Ans:Yes
2. Is there any specific steps that need to be followed why installing AS adapter in clustered environment.
Ans:No

How to install Additional Application Server for EP (ESS/MSS functionality)

Is it the path SAP application Server Java->Oracle->High-Availability System->Dialog instance

Hi,
And what else could it be ?
Olivier

Additional Application Server

Hello All!
I'd like to open a new discussion about adding a new application server to enhance the performance of my production system.
At the implementation, we had only two company codes, but nowadays we have added a new business unit in our SAP system as a new company code. This caused an increase of response time only at closing period (about the 2nd to 3rd business day for CO users) and casually at another time.
This is causing an increase of response time from 600-700ms to 2100ms at the more critical period of day, and consequently dissatisfaction from all users.
On July, we're implementing a new business unit, a new company code, then, a new CO closing procedures. I think it will increase more the response time.
What are your opinion about this case? May I really think about installing an application server to provide more CPU power, even for a short period of the month?
All opinion are very important for me! Thanks in advance for all help!
Best Regards,
André Koji Honma
Support Analyst

Hi André,
if your CPU is often 100%, you have to do something !
There is a very interesting part in WRKSYSSTS - the DB-capacity !
How high is that while the CPU is at 95%+ ?
If this is low, the appl server will help, if not, the SQL is the issue as you are in fear of ...
Why is the DB-time high, even when an appl server might help ?
The db time ALWAYS becomes high, when the CPU is at 100%, because then it just takes long to process each statement ...
But, as said above, it could even be, that the resources are eaten by SQL ...
=> we need the following figure (not on a second base, but several minutes:
WRKSYSSTS:
% CPU benutzt . . . . . :       41,3
% DB-Kapazität . . . . . :        4,8
Abgelaufene Zeit . . . . :   00:13:57
How is this on your site typically, when you do have the issues ?
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Fatal Error during Installation of Weblogic Application Server 11g (10.3.4)

Hi,
I have installed Weblogic server 10.3.4 in the first attempt but when I was deploying an ear, Server gets crashed (JDK was crashed) and after that I was unable to start the server because it was giving an error for JDK.
Then I uninstalled existing Weblogic server and tried installing server (same version using same setup) once again but it is not allowing. It is asking me for directory (WLS Home Directory), Complete/Custom and when installing finally, it is flagging an error (when 39% installation is complete) "Fatal Error encountered during file installation, the installer will now cleanup and exit! C:\<Home Directory>\wlserver_10.3\common\bin\consol.exe (Access is denied)".
Can any one please help me in resolving this error. Thanks in advance
Regards,
Priya

Hello,
You need to check the permissions on the middleware home directory. Give permissions and then try to install weblogic server, it will work.
Are you trying to do first time weblogic server installations. If you have already domain created then from there also you can create a seperate domain
Regards

OIM Installation over Weblogic application server - Login Exception

Hello there,
I installed OIM 9.1.0.1 on Weblogic 10.3 with DB 10.2.0.1. I am not able to login into the Administrator web console. And I am getting this following error as stated by the logs below with DEBUG level. I have used sun jdk provided in the weblogic installation itself and in Production mode - Non clustured, non SSO.
ERROR,14 Jun 2009 23:30:02,906,[XELLERATE.SERVER],Class/Method: QuartzWrapper/ex
ecute encounter some problems: javax.security.auth.login.LoginException: javax.s
ecurity.auth.login.LoginException: java.lang.SecurityException: [Security:090304
]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginExce
ption: [Security:090302]Authentication Failed: User xelsysadm denied
Thor.API.Exceptions.tcAPIException: javax.security.auth.login.LoginException: ja
vax.security.auth.login.LoginException: java.lang.SecurityException: [Security:0
90304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLogi
nException: [Security:090302]Authentication Failed: User xelsysadm denied
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:477)
DEBUG,14 Jun 2009 23:30:02,953,[XELLERATE.SCHEDULER],Loading Scheduled task clas
s com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,14 Jun 2009 23:30:02,953,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoad
er/getClassLoader entered.
DEBUG,14 Jun 2009 23:30:02,953,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoad
er/getClassLoader left.
DEBUG,14 Jun 2009 23:30:02,968,[XELLERATE.SCHEDULER],Loading Scheduled task clas
s com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,14 Jun 2009 23:30:02,968,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoad
er/getClassLoader entered.
DEBUG,14 Jun 2009 23:30:02,968,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoad
er/getClassLoader left.
DEBUG,14 Jun 2009 23:30:02,968,[XELLERATE.SERVER],Class/Method: QuartzWrapper/ex
ecute entered.
INFO,14 Jun 2009 23:30:02,968,[XELLERATE.SERVER],Quartz Executing Scheduled tas
k : Scheduled Provisioning Task
DEBUG,14 Jun 2009 23:30:03,015,[XELLERATE.SCHEDULER],Class/Method: SchedulerUtil
/eventPreInsert entered.
DEBUG,14 Jun 2009 23:30:03,015,[XELLERATE.SCHEDULER],Class/Method: SchedulerUtil
/getSchedulerInstanc left.
ERROR,14 Jun 2009 23:30:03,015,[XELLERATE.ACCOUNTMANAGEMENT],Class/Method: tcUti
lityFactory/tcUtilityFactory(Hashtable env, tcSignatureMessage poUserIDMessage)
encounter some problems: javax.security.auth.login.LoginException: java.lang.Sec
urityException: [Security:090304]Authentication Failed: User xelsysadm javax.sec
urity.auth.login.FailedLoginException: [Security:090302]Authentication Failed: U
ser xelsysadm denied
javax.security.auth.login.LoginException: javax.security.auth.login.LoginExcepti
on: java.lang.SecurityException: [Security:090304]Authentication Failed: User xe
lsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authent
ication Failed: User xelsysadm denied
at weblogic.security.auth.login.UsernamePasswordLoginModule.login(Userna
mePasswordLoginModule.java:199)
at sun.reflect.GeneratedMethodAccessor131.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:1
86)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:6
80)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at Thor.API.Security.LoginHandler.weblogicLoginHandler.login(Unknown Sou
rce)
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:477)
ERROR,14 Jun 2009 23:30:03,015,[XELLERATE.SERVER],Class/Method: QuartzWrapper/ex
ecute encounter some problems: javax.security.auth.login.LoginException: javax.s
ecurity.auth.login.LoginException: java.lang.SecurityException: [Security:090304
]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLoginExce
ption: [Security:090302]Authentication Failed: User xelsysadm denied
Thor.API.Exceptions.tcAPIException: javax.security.auth.login.LoginException: ja
vax.security.auth.login.LoginException: java.lang.SecurityException: [Security:0
90304]Authentication Failed: User xelsysadm javax.security.auth.login.FailedLogi
nException: [Security:090302]Authentication Failed: User xelsysadm denied
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown S
ource)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
ava:477)
DEBUG,14 Jun 2009 23:30:03,125,[XELLERATE.SCHEDULER],Loading Scheduled task clas
s com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,14 Jun 2009 23:30:03,140,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoad
er/getClassLoader entered.
DEBUG,14 Jun 2009 23:30:03,140,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoad
er/getClassLoader left.
DEBUG,14 Jun 2009 23:30:03,140,[XELLERATE.SCHEDULER],Loading Scheduled task clas
s com.thortech.xl.scheduler.core.quartz.QuartzWrapperusing ADP classloader
DEBUG,14 Jun 2009 23:30:03,140,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoad
er/getClassLoader entered.
DEBUG,14 Jun 2009 23:30:03,140,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoad
er/getClassLoader left.
DEBUG,14 Jun 2009 23:30:03,156,[XELLERATE.SERVER],Class/Method: QuartzWrapper/ex
ecute entered.
INFO,14 Jun 2009 23:30:03,156,[XELLERATE.SERVER],Quartz Executing Scheduled tas
k : Issue Audit Messages Task
DEBUG,14 Jun 2009 23:30:03,156,[XELLERATE.SCHEDULER],Class/Method: SchedulerUtil
/eventPreInsert entered.
DEBUG,14 Jun 2009 23:30:03,156,[XELLERATE.SCHEDULER],Class/Method: SchedulerUtil
/getSchedulerInstanc left.
ERROR,14 Jun 2009 23:30:03,156,[XELLERATE.ACCOUNTMANAGEMENT],Class/Method: tcUti
lityFactory/tcUtilityFactory(Hashtable env, tcSignatureMessage poUserIDMessage)
encounter some problems: javax.security.auth.login.LoginException: java.lang.Sec
urityException: [Security:090304]Authentication Failed: User xelsysadm javax.sec
urity.auth.login.FailedLoginException: [Security:090302]Authentication Failed: U
ser xelsysadm denied
javax.security.auth.login.LoginException: javax.security.auth.login.LoginExcepti
on: java.lang.SecurityException: [Security:090304]Authentication Failed: User xe
lsysadm javax.security.auth.login.FailedLoginException: [Security:090302]Authent
Does anybody have any clues ?
Thanks in advance.

I faced similar issue sometime back with Weblogic.
Here's how I resolved that -
Using weblogic admin console verify that OIMAuthenticator is present in weblogic Authentication Providers under Security Realms - >myrealms->Providers
Also check that Control Flag in DefaultAuthenticator is set to "SUFFICIENT". In my case after the installation it was still set to "REQUIRED".

Installation of Additional Application Server

Similar Messages

Maybe you are looking for