Installation of additional DI in HP-UX server connecting to DB6 AIX
Hi,
I would like to ask to anyone who has experience in installing additional dialog instance in HP-UX server and connecting this DI to an existing Central Instance on DB6 AIX. Are there any watchouts that I need to consider to be able to implement this smoothly?
Thanks.
Regards,
Sameysha
Hi Frank,
Thanks for your inputs.
Is there any recommendations in installation of additional DI in the production systems? As DB/CI should be up and running while installing the DI - is it ok to do the installation during productive hours? My worry is that after the DI installation - it will be already visible in SM51 and can be used by the system to accomodate other loads and may have impact to the user's activities. Are there any best practices recommended for this scenario?
Regards,
Sameysha
Similar Messages
-
HA Installation of ERP 6 With SQL 2005 Server Problem.
hi ,
i have two blade server with windows 2003 Enterprise and cluster configure on them as prescribe by the note of Microsoft.
now i have installed MS Sql 2005 Server as said by the SAP Documentation on first node and it was sucessfull . after that i installed ABAP (ASCS) SCS on first node and it was installed too . now i am stuck at the process of FIRST MSCS NODE step
the installation note says :-
7.4.5Configuring the First MSCS Node
To configure the first MSCS node so that it functions properly in MSCS, you have to run the cluster configuration option offered by the SAPinst tool. When you run this option it:
Creates the SAP cluster group
Copies tools to the SAPCluster directory
Sets the SAPService to manual
Makes sure that the SAPOsCol service starts from the SAPCluster directory
this says cluster configuration option but i can't find it any where and i don't know how the %windows%/sapcluster dir creates do i have to create it manually if so then how, the sap document says as follows :-
SapCluster Directory
In an SAP cluster installation, an additional directory u2013 %WINDIR%\SapCluster u2013 is created under the system directory.
This contains all the SAP files required by all MSCS cluster nodes, independently of the MSCS node the SAP instance is running on. The files are database tools and program files (executables) used by the operating system monitor (SAPOsCol).
The directory is added to the path variable of the user <sapsid>adm.
can any one help me in this .
thanks in advancedthanks for response , at the phase FIRST MSCS NODE it stuck
the R3CLUS.LOG file is as follows :-
24.8.2010, 13:14:26, ntclsapclus.cpp, 213, Entry: InstallSAPResourceType
24.8.2010, 13:14:26, ntclsclinst.cpp, 58, Entry: Sclinstsrct::Create
24.8.2010, 13:14:26, ntclsclinst.cpp, 79, CreateClusterResourceType RC= 183
Cannot create a file when that file already exists.
24.8.2010, 13:14:26, ntclsclinst.cpp, 91, DllRegisterCluAdminExtension RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 102, DllRegisterServer RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 116, Exit: Sclinstsrct::Create RC= 0
24.8.2010, 13:14:26, ntclsapclus.cpp, 215, Exit: InstallSAPResourceType RC= 0
and SAPINST.LOG file say's in last lines:-
INFO 2010-08-24 13:15:26.655
Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0
WARNING[E] 2010-08-24 13:15:26.670
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
ERROR 2010-08-24 13:15:26.824
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
and SAPINST_DEV.LOG say's in last lines :-
WARNING[E] 2010-08-24 13:15:26.670
CJSlibModule::writeError_impl()
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
TRACE 2010-08-24 13:15:26.793 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-08-24 13:15:26.824 [sixxcstepexecute.cpp:950]
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > MS SQL Server > High-Availability System > First MSCS Node. You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/HA/MSCS-A.
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
help needed........
Edited by: Eric Brunelle to fix HTML tags on Aug 24, 2010 9:15 AM -
Un installation of 11.5.8 on windows server 2000
HI,
I tried to Un install and cleanup the installation of 11.5.8 on windows 2000 server. I used doc. given on metalink. Afterwards I couldn't start the Rapidwiz. I could only reinstall 11.5.8 after reinstalling win2k server. If anybody has does the successful un installation of 11.5.8 on win2k server, Pl. provide to me the information.
Thanks
RajeevKashif,
Do you have a proper entry in the hosts file? Verify by running the following:
C:\> ping <hostname>
C:\> ping <hostname.domainname>
In addition, please check the installation log file for more details about the error. -
Installation guide for 9ias on RedHat Advanced Server 3
Hi
Does anyone has the installation guide for 9ias on RedHat Advanced Server 3 please? Thank you!there is an installation guide for oracle applic server 9 and above on red hat advanced server 3 in pdf format on the linux technology center page on oracle. here is the file link.
"Install Guide: Oracle Application Server on Red Hat Enterprise Linux AS (PDF) May 2003"
you may wanna check the following link for that page.
http://otn.oracle.com/tech/linux/index.html
is this what you are looking for?
asif
-
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Error in the installation of additional components
Hi,
we've got this problem: we tried to install the creative suite cs3 on different computers in our studio, but we haven't been able:because it shows the message "error in the installation of additional components"...
what we can do???
thank you very much for your helpYou can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html -
SAP installation guiengine:No GUI server connected;waiting for connection
Hi All,
I need one help
I am trying to install SAP ECC 6 in Redhat Linux 5 and database oracle
I have installed java 1.4.2_16, I have set the environmental variables also.
But if I start the SAP installation by executing SAPINST , I am facing the below error
guiengine: No GUI server connected; waiting for a connection on host welcome, port 21200 to continue with the installation
I have tried to execute xclock to check it, but its gives the below error
ERROR: canu2019t open display: welcome:0.0
I found that before setting the below display environmental variable, xclock worked good, but after setting the below display environmental variable, I am facing this error
export DISPLAY=hostname:0.0
I searched for this error, some people posted that we have to change the display environmental variable like export DISPLAY=:0, set DISPLAY=:0.0,
I tried it but still facing the same No GUI server connected error.
I hope it will be a problem with display environmental variable and I have no other clues, please help me, Thanks.
Thanks,
Senthil.Hi,
We are trying in my personal laptop, so I have not set any ip addess. Is there any other way like our loop back adapter settings in windows, to configure ip address in Redhat linux 5 in individual machines.
Also I searched in forums few other people who has already faced the same error. They have set the display environment variable export DISPLAY=ipaddress:0.0 with ip address but they also has faced the same error and itu2019s not resolved.
Please help me if there will be any other reason for this error, Thanks.
Thanks,
Senthil. -
we formatted Database server and restored all the databases from the backup. but the sharepoint site is giving below error when i access the home page.
we have 3 application servers in that two are working fine, but only one server getting the below error.
SQL database login for 'SharePoint_Config_2010' on instance 'db server' failed. Additional error information from SQL Server is included below.
Login failed for user 'domain\user'.
could you help what is the issue?Hi,
According to your post, my understanding is that you failed to access sharepoint site with one application server.
It was due to the MOM/SCOM Agent that has a SharePoint management pack installed, the agents Windows Service runs as ‘Local System’ and thus causes this.
The workaround is to either kill the SCOM agent service, or set it to run as a dedicated service account.
In addtion, I recommend to add the logon account of the SharePoint Timer service as a user of the SharePoint_Config database. Give role membership to the account db_owner.
You also need to add the SharePoint accounts back into sql server.
There are some similar articles for you to take a look at:
http://blog.blksthl.com/2012/04/26/login-for-sharepoint_config-login-failed-for-user-domaincomputername-scom-agent/
http://msdn.microsoft.com/en-us/library/jj551781(v=nav.70).aspx
http://sharepoint.stackexchange.com/questions/51623/moved-sql-databases-for-sharepoint-2010-and-now-have-a-3351-error
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
category-database
event id-3351
source-sharepoint foundation
SQL database login for 'DB_Config' on instance 'DB\instance' failed. Additional error information from SQL Server is included below:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
I have been getting this error every hour on only 1 application server of the 2.
My farm consists of 2 app servers, 2 wfes & 2 sql nodes.
My public site is working fine. Authentication is NTLM.
SharePoint VSS Writer is disabled.None of my appPool accounts are running under local system.
I have read many forums/blogs, but couldnt find a solution for this.
Any help would be appreciated!Hi,
As I understand, you found event id 3351 in event log. Please collect more information as below:
Check if the error also occurs on other servers in your farm.
Check if backup job is scheduled at the time when the event id occurs.
Please run Config Wizard or psconfig.exe -cmd secureresources on all servers and test the issue again.
Regards,
Rebecca Tu
TechNet Community Support -
Best practice for installation oracle 11g rac on windows 2008 server x64
hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christianHi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira -
Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server
im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
Nitin Gaurav
[email protected]Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
the new AD functionality available in 2008.
Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
AD and upgrade the functionality levels yourself. -
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: DOMAIN\SA account
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
This is the error, if often find in my WFE's. I googled for the error and granted DB owner roles for the service account as specified in TechNet, but no luck.
Even same error logs generated on SharePoint logs.
SqlError: 'The target principal name is incorrect. Cannot generate SSPI context.'
Source: '.Net SqlClient Data Provider' Number: 0 State: 0 Class: 11 Procedure: 'GenClientContext' LineNumber: 0 Server: 'servername\SHAREPOINT,4101'
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
System.Data.SqlClient.SqlException (0x80131904): The target principal name is incorrect.
Cannot generate SSPI context. at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions
userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnecti...
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Thanks.
BadriFor SharePoint to recognize the SQL server name we provide its name and instance while installing SharePoint. When we are using SQL alias to connect to SQL, we need to configure the same alias on SharePoint server so that SharePoint recognize alias over
the network.
Having SharePoint connect to a SQL Alias instead of the NetBIOS name is always a good idea. The main benefit is, if you ever have to switch the SQL Server or connect to a SQL Cluster VIP address, you just change the Alias to point to the SQL Cluster name
on the SharePoint Server and restart the SharePoint Timer Service and you are good to go.
Please check this blog.
http://blogs.msdn.com/b/priyo/archive/2013/09/13/sql-alias-for-sharepoint.aspx
http://technet.microsoft.com/en-us/library/hh292622(v=office.15).aspx
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered. -
Hi Gurus,
I am lookign for SAP 4.7 installtion guide with 2000 and 2003 server can any one help me to get the same please...
NO SAP COPY RIGHTED MATERIAL PLEASE ......
please email the same : [email protected]
with regardsHi Hari,
Please can you send me the installation guide of IDES on Windows 2003 Server.
My email is [email protected]
Thanx
SALEH. -
Error message 441 'server connection'
Hi, I have an HP Photsmart 5520 and the following comes up when i try to scan to an email 'Server connection Error 411' could you please help me.
Thanks
Nuriyentufa,
Welcome to the HP Forum.
Install the Full Feature Software for the printer.
HP Photosmart 5520 e-All-in-One Printer Drivers
General Instructions to install the Printer Software
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Photosmart 5520 e-All-in-One Printer Drivers
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Next:
If available, you may wish to download the Print and Scan Doctor and / or other programs from Category – Utilities
HINT:
Install the Utilities / Tools first; the little installation packages are smaller in size
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
On the bottom half of the main webpage for your printer, you can find helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: If the printer supports Ethernet, you may connect the printer to the network (and assign the printer an IP address at the router, if you like). Once the printer is connected to the network, be sure the printer is turned on and then install the printer software.
After the initial installation is complete and working, be sure to check for and install any relevant updates - check Category - Update
There is valuable information at the printer’s website, including manuals, how-to pages, Troubleshooting and SOLUTIONS for problems, and alerts for your printer. Be sure to take an extended look at what’s available. Bookmark the page.
============================================================================
You might consider the following solution.
The solution assumes you have the necessary email set up and functional AND that the printer is set up and ready to use that address.
Once the Full Feature Software is installed, Open the Printer Assistant icon on your Desktop.
Have the printer switched ON and connected.
Select the Printer Home Page (EWS)
This should open your browser and the Embedded Webpage Service -- your printer's online webpage.
You can elect to provide a Static IP for your printer - this sometimes helps.
In addition, you can tell the printer the IP address of your ISP (Internet Provider). In doing so, there is no ambiquity about where the printer is looking for the "path to the internet"
You do need to know your ISP information -- it will DIFFER from the example shown below.
Example - Static IP and DNS Server Configuration for Printer
If you do not know your ISP address, you can temporarily use the Google Public server information, although this is not recommended as a long term solution:
Manual Preferred DNS should read 8.8.8.8
Alternate DNS Server should read. 8.8.4.4
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur -
Server Connections Interrupted - Mountain Lion, latest client and server upgrade
Hello,
I have seen several errors of a similar kind with no definite fix anywhere on here, so I thought I would post this.
We are running a network with a Mountain Lion Server on a Mac Mini, connected to a router for internet access and connected to a local network for client computers. All the clients are running the latest version of Mac OS X Mountain Lion and are connecting to remote home directories on the server. They also use several group directories.
As of late, they have been getting the message: "Server Connections Interrupted. Ignore / Disconnect all" concerning their group volumes.
I haven't been able to find anything in the logs indicating why this happens, or how to fix it, or why it started appearing.
What have people experienced out there? It appears on all sorts of user accounts, on different computers in different areas of the workplace.
/ Z.Additional data:
There is no WIFI enabled on the network, all is networked using ethernet.
There's a Time Capsule on the Server, which backs up the server data regularly. This seems to be connected one way or another from the threads I've read, but those are from aprox. two years ago while this started happening recently.
Maybe you are looking for
-
My bookmarks toolbar in Firefox 10.0.2 Mac OSX 10.6.8 suddenly disappeared. View>Toolbars>Bookmarks Toolbar is checked. Dragging URL's to the bookmarks toolbar area no longer works. The gray area appears and disappears when checking/unchecking under
-
Why does my photobooth unexpectedly quit?
When I start a video, it only records for 1 to 3 seconds and shuts the photobooth window right away. Then it asks to send an error report or restart it. I have no idea why it does this because I have a brand new macbook pro so it shouldn't have issue
-
Hi all, We are a helpdesk for our customers who use the Oracle Purchasing Apps to do all their procurement. As part of the helpdesk activity we perform functional and technical support. One of the requirements we get from our client is to run "report
-
USB ports not working at all - C655D-5048
Please help me. This is driving me nuts! OS: Windows 7 Home Premium (x64) Model: Toshiba Satellite C655D-0548 Actions already taken: - System restore (twice) - Uninstalling all USB ports via Device Manager - Resetting the BIOS to its original setting
-
hi all my client requirement is" confirmed employee who have completed 1 year of service r eligible for Privilege leave.of 12 days per calender year. and employee can accumulate up to 30 days of privilege" for which i have defined base entitlement