Installation of Application Server (Dialog Instance) R/3 4.6C

I am trying to install a Dialog instance for our test server and I am getting the following error
Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
checking host name lookup for 'CFSAP4'
Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
offical host name for 'CFSAP4' is 'CFSAP4.DAKAmericas.com'.
Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
host 'CFSAP4' has ip address '10.16.6.123'
Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
offical host name for '10.16.6.123' is 'cfsap4'.
Error: DIALOGINSTANCE_NT_MSS SubstituteVariables 2 326
The official name of hostname cfsap4 is CFSAP4. Please check your DNS configuration and insert an entry in etc\hosts.
Error: DIALOGINSTANCE_NT_MSS ColdKeyCheck 2 326
Phase failed.
Error: Main {} 2 326
Installation aborted.
I have checked the DNS setting and found some things, which I have deleted, but still this error, do I need to reboot or is their a some time which I have to wait for the DNS setting to take effect.
Thanks
Jagraj Dhillon
Message was edited by: Jagraj Dhillon

SAP Notes 83200 and 23538,
SAP treads hostnames case sensitive.
using \etc\hosts should be the last method to fix this because it will bypass DNS.
Example: Central instance corrects it's hostname using \etc\hosts - app-server uses DNS. this situation may result in different hostnames.
regards
Peter

Similar Messages

Oracle BIEE installation issue: Application Server default OC4J name error

Hi all,
I am installing OBIEE 10.1.3.3.2 windows 32bit version on windows 2003 sp2. Before the installation I have installed the JDK 5 and Application Server 10.1.3.1.0(J2EE Server and Web Server) on the same server according to the pre-install section in the OBIEE installation guide.
When I install OBIEE (advanced installation), I got the error when I specify the Oracle Application server location:
Please specify a valid Oracle Application Server 10g installation location. A valid Oracle Application Server 10g installation must have the default OC4J instance named home and that home OC4J instance must be enabled.
When I install the Application Server 10.1.3.1.0, I have change the default OC4J name to "oc4j-soa", I think this is the root reason I got the error. I have tried to create another OC4J instance named "home", but failed coz the name is used for another directory.
Then can I have another way to continue the installation? Why OBIEE installer have this strange constrain while not any words about this issue in the installation guide (coz I follow the each steps in the guild before I take action)? I have search some threads and the only information is to install a simple installation, but it would create another application server..... and the simple installation type is not what I want.
Can anybody give me some hint or information about this issue? otherwise I have to purge and reinstall the server...... Thanks
Scott

Reinstalling the App Server and naming oc4j instance to be called "home" resolves the issue but this is an odd requirement. I have an OC4J instance already running and it is named something else. Is there any other alternative to make this work?
Swapan.
PS. I can always create a new oc4j instance named "home" but this is wasting of server resources.

Installation of central or dialog instance?

Hello,
We are currently running an ABAP-System only. We want to install an AS JAVA in order to use Adobe Document Services. We only want to use Print Forms and no Interactive Forms.
My question is, if the JAVA installation has to be as a central instance or as a dialog instance? I read through all the guides I could find, but I'm not quite sure in this point. Is the dialog instance only usable if you are already using a JAVA distributed system?
What are your recommendations, is it enough to install a simple AS JAVA or would you recommend installing EP or EPC? As I said, the AS JAVA is only needed for Adobe Print Forms for now.
Thanks in advance

Hai,
Check SAP Note: 925741, point no:1.
For the scenario of print forms you can Install Adobe document services on a SAP Web AS 6.40 ABAP + J2EE system (J2EE Add-In).
Regards,
Yoganand.V

OpenSuse10.3 Installation of Application Server 10.1.3.1

Hi all,
today I have installed an Oracle Application Server 10.1.3.1 on OpenSuse10.3. Installation with the Oracle Installer was ok, just the last step when Oracle tried to configure Oracle Application Server components was not successful. I retried the step without success. I then quit the Oracle installer and tried to start the http-server with the opmn tool. I recieve the following falilure message: "HTTP: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directory"
The file is really not present on the system. After some time on google I think I need some packages and install them. I tried to download and install the package "gnome-libs-1.4.1.2.90-34.1.i386" but without success because of dependencies. Unfortunately I Cannot find the packages needed to install the gnome-libs.
Can anybody help me on this?

Hi Shail,
thanks for your answer. No, unfortunately I did not
take a look. But I am now able to start the
HTTP-Server. After hours spent on google I finally
found the right package and installed it. One
Question is left: When I run opmnctl status and the
HTTP-Server is "Alive", does this mean that I can
navigate to http://hostname.domainname:http_port and
see the welcome page? If this is the case, there is
something wrong, because I get an error screen
instead of the welcome page...
Regards
MarkusThat's right, if you are successfully able to start OHS, you should be able to see the welcome page. What error do you see, a 404 or 500?
But agree with Jacco that you might uncover more issues down the road so it is better to reinstall (after successfully meeting all prereqs) vs. spending time trying to diagnose and fix.
Thanks
Shail

Problem with installation oracle application server 10g on Solaris 10x86

Hello all.
Help me, please.
I'm trying to install Oracle aplication server 10.0.1.2.0.2 on solaris 10x86.
When i install oracle infrastructure(metadata repository and identify management),
i have a problem - on step "Configuration Assistants", where assistants will confugure and start the components, "Single-Sign On Configuration Assistant" -Failed
(Details:....
Finished executing the call.Child Process has exited.
SSO Configuration Assistant failed.
Configuration assistant "Single Sign-On Configuration Assistant" failed
Anybody know, how solve this problem?
Sorry for my english.

Hi.
Now
/etc/hosts
127.0.0.1 localhost
82.179.1.1 testoracle loghost
/etc/resolv.conf
domain kemsu.ru
nameserver 82.179.1.5
Or must be in /etc/hosts/
82.179.1.1 testoracle.kemsu.ru loghost
You about this?

Installation of Application Server SOA Suite on EL5

Is there a way to install the SOA Suite 10.1.3.1 on EL5 or a cookbook for that

The EL5 is not refer to in the SOA Suite Installation Guide.
May be some trouble.

Error in installation Oracle Application Server 10g

i am getting an error b4 i start the installtion error says that i have to modify kernel and set value to 65563, well i have checked the value and it is 65563? i am running Solaris 10. any ideas?

You mean when you run *./runInstaller.sh* you get this error in the pre-check?
If so, why dont you try *./runInstaller.sh -ignoresysprereqs*
Only if you are meet all requirements.
Greetings.

SAP Dialog Instance Installation.

Hi
Installation of ABAP System ECC6.0
I am trying to install another application server(Dialog Instance) on
different host. My both System Central(main server) and Dialog system in
same domain. I am installing SAP Server as a Local Installation.
I am able to installed Dialog Instance on same Host of Central System. But
when I was trying to installation it on different Host, I got error on
u201CStart Dialog Instanceu201D step that is last step it cant able to start Dialog
Instance.
Can you please tell me the Prerequisite for this type of setup as well as
any other Setting related to u201Chostsu201D and u201Cservicesu201Dfile ? and also central system
side settings.
Following Error is occurred :
u201CCopy Errors detected.................: 0
Sync Errors detected.................: 0
Warnings detected....................: 0
INFO 2008-11-21 13:14:39
Execute step createOsCol of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:40
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(SAPOsCol).
INFO 2008-11-21 13:14:41
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove SAPOsCol
is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove SAPOsCol" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:41
The 'SAPOsCol' service on the 'Local' machine was created successfully.
INFO 2008-11-21 13:14:45
The service 'SAPOsCol' started successfully on host 'Local'.
INFO 2008-11-21 13:14:46
Execute step createService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:14:46
Creating SAP start service of instance PT6/D02...
INFO 2008-11-21 13:14:47
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\sapstartsrv.exe.log.
INFO 2008-11-21 13:14:47
Output of D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm is written to the
logfile sapstartsrv.exe.log.
INFO 2008-11-21 13:14:53
Execution of the command "D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm" finished with return
code 0. Output:
Service succesfully installed.
INFO 2008-11-21 13:14:53
Execute step setServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO[E] 2008-11-21 13:14:58
FSL-01027 Account user="I3976vm2\SAP_PT6_LocalAdmin" does not exist.
INFO 2008-11-21 13:14:58
Successfully set '(S-1-5-21-134454618-3270849815-193169279-1011, NONE, + |
SERVICE_START | SERVICE_STOP)(S-1-5-18, NONE, +o | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL |
SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE
| WRITE_DAC | WRITE_OWNER)(S-1-5-4, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-6, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-11, NONE, + | SERVICE_USER_DEFINED_CONTROL)(S-
1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-21-134454618-3270849815-193169279-1009, NONE, +
| DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service
I3976vm2\SAPPT6_02' on computer 'I3976vm2'.
INFO 2008-11-21 13:14:58
Execute step createCCMSService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:58
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(sapccmsr.02).
INFO 2008-11-21 13:14:59
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove
sapccmsr.02 is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove sapccmsr.02" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:59
Execute step setCCMSServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:00
Execute step registerEventsDLL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step setICMBndPermissions of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step copyRFCExecSec of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:10
Copied file '
i3643vm/sapmnt/PT6/SYS/exe/uc/NTI386/rfcexec.sec' to
'D:/usr/sap/PT6/D02/work'.
INFO 2008-11-21 13:15:11
Execute step callSetDB4PWD of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step unpackJ2EEINSTALL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step runBatchconfig of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step removeTempDirectory of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Execute step start of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Starting instance PT6/DVEBMGS00...
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Starting instance PT6/D02...
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:35
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\stop_PT6_D02.log.
INFO 2008-11-21 13:15:35
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile stop_PT6_D02.log.
INFO 2008-11-21 13:15:43
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe
name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code 0. Output:
STOPSAP executed succesfully
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:48
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\start_PT6_D02.log.
INFO 2008-11-21 13:15:48
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\startsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile start_PT6_D02.log.
INFO 2008-11-21 13:16:21
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386
\startsap.exe name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code
0. Output:
STARTSAP continues...
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:22
State of instance PT6/D02 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:24
State of instance PT6/D02 changed from ABAP: STARTING to ABAP: STARTING.
ERROR 2008-11-21 13:17:24
CJS-30105 Instance PT6/D02 reached state UNKNOWN after having state
STARTING. Giving up.
ERROR 2008-11-21 13:17:24
FCO-00011 The step start with step key
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|start was
executed with status ERROR .
Thanks in advance.
Regards
Manoj

Hi, I'm Josephine and I almost have the same scenario as this problem reported earlier but it's just that we are using SAP Netweaver 04 SR1.
However, I'm installing additional SAP Application server to our existing one.
Our existing main server is in MS cluster. SAPPRD1 (DB Server in node A) and SAPPRD2 (SAP App Server in node B). System ID is PRD and the CI Instance number is 00. The hostname where the USR folder is SAPPRD (hostname in the cluster environment but this is the SAPPRD2 server in node B).
Now I'm installing additional SAP App server into a new host (SAPPRD3 & SAPPRD4) they are all in the same domain.
But I would like to install the 2nd and 3rd SAP App server in a local host.
While installing there was an error "Output: Service not started" the process "Create or reregister services" during the installation stopped.
I used the installer under the folder InstMaster\IM01_NT_I386\SAPINST\NT\I386\sapinst.exe and run the Dialog Instance under the SAP Netweaver\ABAP System\MS SQL Server\Unicode\.
This is the part of the sapinst log where the error starts:
PHASE 2009-01-28 08:39:29
Preparing DBMS-specific profile parameters
INFO 2009-01-28 08:39:30
Adapt operation t_SAPComponent_Profiles_SHARED processed successfully.
PHASE 2009-01-28 08:39:31
Handle services
INFO 2009-01-28 08:39:32
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_MSS_UC\DI\sapstartsrv.exe.log.
INFO 2009-01-28 08:39:32
Output of C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm' is written to the logfile sapstartsrv.exe.log.
WARNING 2009-01-28 08:39:35
Execution of the command "C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm'" finished with return code -1. Output: Service not started.
ERROR 2009-01-28 08:39:35
MOS-01011 'C:\usr\sap\PRD\D02\exe/sapstartsrv.exe' returned with '-1'.
Please help me on this I can't successfully install another dialog instance to add to our existing one now.
Thank you and hoping for your reply.
Yours truly,
Josephine Dejolde

How to install dialog instance?

hai
I installed sap 4.6c. I want to install additional application server (dialog instance) in another system. can u tell me the steps should i follow? Do i need to install oracle in that system?
with regards
venkatesh

Hi,
As you said you want to install dilog instance in diffrent system means you have to install oracle client,,java.And we have to set the environment variables
Then run the setup.cmd u will get three options
central instance
database instance
dilog instance
select diloginstance and run the installation ,same like as central installation.
In dilog instance will ask the censtall instance instance number,database host name..etc.
If u start once you can do it.
i hope it will help you.
kiran kumar.v

Install additional application server for existing CE7.11 system

Hello Gurus,
We have an existing CE 7.11 system installed. After installation, we have updated the SPS level to 04 recently. The CE 7.11 system is already part of a NWDI track configuration since many months and developers are already using since then.
Now, we need to install an additional application server (dialog instance) for the same system.
I want to know: Do I need to carry out any further post-installation steps after installation of the new app server?
Does it matter that the system is already at a certain SPS level including an updated kernel? Will there be any issues at all?
Basically, what else should I do after the installation of the app server is completed?
Thanks and Regards,
Shitij

Question got repeated by mistake.

Install additional application server for existing CE 7.11 system

Hello Gurus,
We have an existing CE 7.11 system installed. After installation, we have updated the SPS level to 04 recently. The CE 7.11 system is already part of a NWDI track configuration since many months and developers are already using since then.
Now, we need to install an additional application server (dialog instance) for the same system.
I want to know: Do I need to carry out any further post-installation steps after installation of the new app server?
Does it matter that the system is already at a certain SPS level including an updated kernel? Will there be any issues at all?
Basically, what else should I do after the installation of the app server is completed?
Thanks and Regards,
Shitij

Question got repeated by mistake.

Cannot print on LOCAL printer, but only from one application server

Hello guys,
we have a case of user being unable to print directly on their own LOCAL printer from a certain application server. The status of their spool requests is stuck on "Waiting"/"Waiting for output formatter."
If the print request is started either from the central instance or another application server, then everything works fine and a special window where you can choose your real local printer appears at the end and the request is printed. In the case of that "strange" application server this window doesn't appear at all. It seems that the printer daemon (SAPLPD) won't even execute in the background.
The question is what can disturb SAPLPD of being properly triggered when the user fires a print out.. May be a certain port is blocked on our linux machine, where this application server (dialog instance) is running?
Any other ideas?
Many thanks,
Polina

hello Polina
As you said its LOC print ,you need to install SAPSprint service on printer host ,this will try establish communication wit
app server .
Regards
Arun.H

Multiple Application server

Hi All
We have an new Application server/Dialog instance installed in our project recently. But once this is done all our Process chains are failing. we had to manually assign a server to the process chains for the process chains to be successful again.
Would there be a setting so that the the process chains would take one of the servers automatically.
Thanks for you help
Regards
D

Hi Guys
Can anyone please help.
regards
D

Dialog Instance installation error - rdisp/msserv_no not possible

Dear All,
While trying to install a DI I am getting the following error:
An error occurred while processing service SAP CRM 5.0 Support Release 3 > Software Life-Cycle Options > Application Server > MS SQL Server > Dialog Instance( Last error reported by the step :Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/CRM05/LM/AS/MSS/DI.
The log says the following:
INFO 2009-07-20 05:21:54.298
Disconnect from message server (UT1VC7P01/3901) succeeded.
ERROR 2009-07-20 05:21:54.298
CJS-00030 Assertion failed: in getMsPort() rdisp/msserv_no not possible. You need a newer message server.
ERROR 2009-07-20 05:21:54.376
MUT-03025 Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..
ERROR 2009-07-20 05:21:54.470
FCO-00011 The step getMsPort with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_checkMsgServer|ind|ind|ind|ind|2|0|getMsPort was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: in getMsPort() rdisp/msserv_no not possible. You need a newer message server..).
Please share your views on what could be missing here.
Thanks a lot for your help and time,
Shival

Hi,
Interestingly enough the installation went through by restoring the original kernel files, i.e. kernel fils as soon as the CI installation was completed.
I have upgraded kernel on CI now and am facing another issue of "Dialong Queue info Unavailable".
Not sure if I should open up a new thread for it.
Please let me know your views/ideas on the above.
Thanks a lot for your help and time,
Shival

Installation of Dialog Instance (DI) - Error during installation...

Hello gurus,
System: SAP ECC 6.0 SR3 (ABAP+JAVA) -- Central Instance (CI)
Database: MS SQL Server 2008
Operation System: Windows Server 2003 X64
I´m trying to install a Dialog Instance (DI) but during the SAPInst I´m faccing with an error!
First at all I made some things/requirements in this new server like:
- Install J2SDK;
- Set Swap space (20 Gb);
- Install SQL Server 2008 x64.
So, after that, I run SAPInst with the following option: "SAP ERP 6.0 Support Release 3 --> Software Life-Cycle Options --> Application Server --> MS SQL Server --> Dialog Instance"
The error is on the screen "MS SQL Server --> Database Connection Information" when I put in field "Database Instance" the value (in my case I write PTREPRDPRD which are the hostname of CI server and the sap instance PRD), after I typing the button "Next" it shown a message error which say:
"Cannot connect to PTREPRDPRD Error(s) returned: SQL Server does not exist or access denied. SOLUTION: Check that you specified the correct name for the database server, that the server is running and you are authorized to log on to it."
Can you help me how to resolve this problem!??
Kind regards,
Joao Dimas - Portugal

Hello Javed,
Here you have it, sapinst_dev log:
TRACE      2010-07-26 13:21:49.582 [iaxxgenimp.cpp:360]
           CGuiEngineImp::showDialogCalledByJs()
<dialog sid="diMssLoginWINOnly">
<title>MS SQL Server > Database Connection Information</title>
<field enabled="true" highlight="false" sid="iHost">
<caption>Database Instance</caption>
<helpitem id="Databases.MS SQL Server.DatabaseInstance"/>
<value type="string">PTRESAPPRD</value>
</field>
<dialog/>
TRACE      2010-07-26 13:21:49.582 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2010-07-26 13:21:57.379 [iaxxdlghnd.cpp:96]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      2010-07-26 13:21:57.379 [iaxxcdialogdoc.cpp:212]
           CDialogDocument::submit()
<dialog sid="diMssLoginWINOnly">
<field enabled="true" highlight="false" sid="iHost">
<caption>Database Instance</caption>
<helpitem id="Databases.MS SQL Server.DatabaseInstance"/>
<value type="string">PTRESAPPRD\PRD</value>
</field>
<dialog/>
TRACE      2010-07-26 13:21:57.395
Call block:MssLoginInfo_ind_ind_ind_ind
    function:MssLoginInfo_ind_ind_ind_ind_DialogPhase_dAskForConnectionValidator_default
is validator: true
TRACE      2010-07-26 13:21:57.395
t_MssLogin.remove(WHERE Key='std')
TRACE      2010-07-26 13:21:57.395
t_MssLogin.insertRow({
Key:std
Host:PTRESAPPRD\PRD
LoginType:WIN
}), inserting
TRACE      2010-07-26 13:21:57.395
MSSTRC: odbc driver is installed.
TRACE      2010-07-26 13:21:57.395
t_MssMessages.remove(WHERE 1=1)
TRACE      2010-07-26 13:22:13.426
Cannot connect to PTRESAPPRD\PRD
SQL Server does not exist or access denied.
TRACE      2010-07-26 13:22:13.457 [iaxxgenimp.cpp:752]
            CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Cannot connect to PTRESAPPRD\PRD<br>Error(s) returned:<br>SQL Server does not exist or access denied.
<br>SOLUTION: Check that you specified the correct name for the database server, that the server is running and you are authorized to log on to it. </body></html>
TRACE      2010-07-26 13:22:13.457 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2010-07-26 13:22:22.973 [iaxxdlghnd.cpp:204]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_ERROR received
TRACE      2010-07-26 13:22:22.973 [iaxxgenimp.cpp:1255]
           CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2010-07-26 13:22:42.410 [iaxxdlghnd.cpp:82]
           CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_PREV requested
TRACE      2010-07-26 13:22:42.410 [iaxxgenimp.cpp:368]
           CGuiEngineImp::showDialogCalledByJs()
<dialog sid="diMssLoginWINOnly">
<dialog/>
TRACE      2010-07-26 13:22:42.442
The step dAskForConnection with key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_MSS_DBINFO|ind|ind|ind|ind|3|0|MssLoginInfo|ind|ind|ind|ind|0|0 has been executed successfully.
WARNING    2010-07-26 13:22:13.426
           lib=iamodmssql module=CIaNtMssDmo
Cannot connect to the database server. Errors returned: [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).
Call your SAP Support.
INFO       2010-07-26 13:22:42.489 [sixxcstepexecute.cpp:781]
Execute step dCheckGivenServer of component |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_getDBInfo|ind|ind|ind|ind|4|0|NW_MSS_DBINFO|ind|ind|ind|ind|3|0|MssLoginInfo|ind|ind|ind|ind|0|0

Installation of Application Server (Dialog Instance) R/3 4.6C

Similar Messages

Maybe you are looking for