Installation of APS with automatic deployment

Hello, I try to install APS with Mysql in automatic deployment. but on the windows where the box should be notched: To install Mysql automatically, I do not have but because it is grayed. I do not have the hand because it is grayed. I do not know what occurs because I cannot continue if I do not install the database Mysql. thank you for the assistance

Hi
I don't know if the software estimates free space before or after that box but you should check if you have the default 5GB free space.
What OS are you using? If you are using a windows server then be sure it it is a 2003 server. You can't install it on a 2000 server, the older documentation is wrong about that.
Regard
Michael

Similar Messages

  • Error when BOE 3.1 installer automatically deploys apps on websphere

    Hi,
    I am trying to install BOE 3.1 on AIX 5.3 using websphere 6.1. I created the websphere profile with no admin secure. In the installation i chose to automatically deploy the web apps on websphere. I provided the details of my websphere profile and specified no 'n' for the option admin is secure. I did not provide any details for the admin user and password.
    The installation goes on fine however all the deployments fail. This is one of the entries in BusinessObjects.12.1.log.summary:
    [error] Errcode 1: /home/<user>/BOE/BOEAIX/deployment/wdeploy.sh websphere6 -DAPP=AdminTools -Das_admin_password="*****" -Dlanglist="en" deploy
    Note that it is providing a password even though I haven't specified any.
    I tried manually deploying them using wdeploy. The details in config.websphere6 were all fine.
    I did not provide any special arguments:
    ./wdeploy.sh websphere6 deployall
    This successfully deployed all the applications.
    I would like the web app deployments to occur at the time of installation itself, please let me know if anybody has faced this problem or has any ideas to fix this.
    Thanks,
    Jithin
    Edited by: Jithin George on May 4, 2009 8:02 AM

    Hi Denis,
    Yes, I was surprised too that it worked with wdeploy.
    1. Yes I made use of the same user for both installation and wdeploy.
    2. I looked up BusinessObjects.12.1.log for more details and found this:
    [info] /home/<user>/BOE/BOEAIX/deployment/wcommon.xml:167: The following error
    occurred while executing this line:
    [info] /home/<user>/BOE/BOEAIX/deployment/websphere6.xml:237: Unable to connec
    t to websphere, please check the administrative user name and password, and the
    administration port, if specified.
    [info]
    [info] Total time: 4 seconds
    [error] Errcode 1: /home/<user>/BOE/BOEAIX/deployment/wdeploy.sh websphere6 -D
    APP=AdminTools -Das_admin_password="*****" -Dlanglist="en" deploy
    As I mentioned in my previous post, I did not provide any password or user(no admin security), yet it seems to provide it in the arguments to wdeploy.
    3. I made no change to WAS between the two actions. The only difference being that I did not provide any password to wdeploy. In the config.websphere6 file, the password line is commented out by default.
    4. I am using websphere 6.1.0.9
    Thanks,
    Jithin

  • Do the SP (i.e. dbo.CdrErrorList) and Views (i.e. CDRReportsConferenceSessionDetailsSummaryView) come with report deployment or Lync installation?

    I'm working on a Lync system and found there is no SP like CdrErrorList or View like CDRReportsConferenceSessionDetailsSummaryView on the CDR database. Do they come with report deployment or Lync installation?
    This question had already been asked, but no 100% sure answer yet. Anyone can confirm this?
    thanks

    Hi,
    Please make sure you have latest CU installed and check it again.
    Kent Huang
    TechNet Community Support

  • SCEP definition update through Automate Deployment Rule

    Hi all.  Got a question on deploying SCEP 2012 definition updates to client PC through SCCM2012 R2 by using Automate Deployment Rule.  It looks like the client PC is not receiving the definition updates immediately.  The ADR seems working
    fine, it completed the synchronization successfully, no error on "PatchDownloader.log" and "ruleengine.log"; deployment folder got filled up with new definition updates.  However, the client is not receiving the new SCEP definition
    updates immediately, although I've configured ADR to install the update as soon as possible, yet nothing happens for the past 2 hours.  I ended up launch the SCEP console on the client PC and then click the "update" button manually, and this
    launch the update process.  I just wondering how much time we need to wait for the SCEP definition update to apply onto the client PC.  Microsoft seems release 3 - 4 definition update per day, I am afraid we might not using the latest definition
    update due to the time waiting issue.  Thank you.

    I've configured the polling interval to take place every 3 hours.  I guess this contribute to the waiting time.  I will keep an eye on it to see if the definition in deed installs automatically. 
    Yes that's one of the delay which is the major Contribution also there would be some delay for the updates when they are downloading and getting updated to the distribution points. You can check the 'Content Status' for that package to verify if it got updated.
    Umair Khan
    Microsoft Support Escalation Engineer
    Blog: http://blogs.technet.com/umairkhan 
      Facebook:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Automatic Deployment between SharePoint 2013 systems

    Hello,
    I would like to ask about the possibility of an automated deployment between a local (development) SharePoint, a test server and a productive server. Is there such a tool or do I have to do all customizations and installations separately on each of the systems?
    Thank you very much for your hints.
    Regards,
    Radek

    Hi,
    According to your post, my understanding is that you wanted to automatic Deployment between SharePoint 2013 systems.
    Per my knowledge, you can move content between environments. Please refer to:
    Moving content between SharePoint environments
    Copy SharePoint production data to a test environment
    In addition, if you want to Automatic Deploy SharePoint, you can refer to:
    Automating SharePoint Deployments in Windows Azure using PowerShell
    Automated Deployment of SharePoint 2013 with Windows Azure PowerShell
    Automated Deployment of SharePoint 2013 in Windows Azure
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • System Center 2012 Error on Automatic Deployment Rule

    Good day,
    I have created and Automatic Deployment Rule to deploy my EndPoint Protection updates. So far, I have been able to deploy the agents, and the Antivirus to all my network computers. The problem I have is when the update rule runs. I have checked the SMSProv.log
    file, and this I what I get:
    Execute SQL =select  all SMS_AutoDeployment.AutoDeploymentEnabled,SMS_AutoDeployment.AutoDeploymentID,SMS_AutoDeployment.SecurityKey,SMS_AutoDeployment.Description,SMS_AutoDeployment.LastErrorCode,SMS_AutoDeployment.LastErrorTime,SMS_AutoDeployment.LastRunTime,SMS_AutoDeployment.LocaleID,SMS_AutoDeployment.Name,SMS_AutoDeployment.Schedule
    from vSMS_AutoDeployments AS SMS_AutoDeployment  where SMS_AutoDeployment.AutoDeploymentID = 1
    I am running System Center 2012 R2 on Windows Server 2012 R2. With this, I run SQL Server 2012 Sp1.
    Thanks
    Chris

    Hi,
    UpdatesHandler.log on the client records about the download and installation of software updates on the client.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • No automatic deployment for Portal Application Standalone DC?

    Hi Experts,
         I created a Portal Application Standalone  DC under NWDI track.
         I checked in the code and activate my request, the log showed that this DC had beed sucessfully built. BUT, I can not find this portal application had beed deployed.  it seems that EP DC can not be deployed automatically
        I searched SDN and there are some topics about this problem, it seems that EP DC can not be deployed automatically, we need to deploy the DC manually, is it right?
       Thanks!
    segement of my build log:
    [pppacker] WARNING: Could not determine correct package of package folder for entity  (portalapplication-api/Class, src.api/)
      [pppacker] Packed   0 files for entity  (portalapplication-api/Class, src.api/)
      [pppacker] Packed   3 files for entity  (portalapplication-core/Class, src.core/)
         [timer] Portal Application libraries packaging finished in 0.389 seconds
    createApplication:
          [echo] create PAR..
           [jar] Building jar: /usr/sap/EP1/JC00/j2ee/cluster/server0/temp/CBS/5/.B/3501/t/80B8A4CDC19F36C272AD330774CF8FF0/com.hcm.isr.newtemplate.par
    createPublicParts:
          [echo] Public Part: API
      [pppacker] Packing public part 'API'
      [pppacker] Packed   0 files for entity Portal API (Portal API)
      [pppacker] Packed 1 entity for public part 'API'
         [timer] Public part packaging finished in 0.114 seconds
    createDeployArchive:
          [echo] Creating portalapp-dd.xml
           [cda] Preparing archive for deploy unit "default"
           [cda]   deployment type: "J2EE"
           [cda]   explicit modules:
           [cda]     /usr/sap/EP1/JC00/j2ee/cluster/server0/temp/CBS/5/.B/3501/t/80B8A4CDC19F36C272AD330774CF8FF0/com.hcm.isr.newtemplate.par
           [cda]
           [cda] Creating Ant build file: /usr/sap/EP1/JC00/j2ee/cluster/server0/temp/CBS/5/.B/3501/DCs/test/isrformtemp/_comp/gen/default/logs/buildDeployArchive.xml
           [cda]
           [cda] 
           [cda] Creating descriptor META-INF/application.xml ...
           [cda] 
           [cda] Creating descriptor META-INF/application-j2ee-engine.xml ...
           [cda] Adding module "com.hcm.isr.newtemplate.par" with container type "PortalRuntimeContainer".
           [cda] 
           [cda] Collecting modules...
           [cda] Adding module 'com.hcm.isr.newtemplate.par' from current development component
           [cda] Ant build file creation finished in 0.119 seconds
    packDeployArchive:
    [srcpacker] Creating source archive
    [srcpacker] No sources available for packing, no archive will be created.
         [timer] Source archive creation finished in 0.008 seconds
        [dcinfo] Creating deploy archive info
        [jarsap] Info: JarSAP version 20060908.1630
        [jarsap] Info: JarSAPProcessing version 20070423.1630 / JarSL version 20070906.1830
        [jarsap] Building: /usr/sap/EP1/JC00/j2ee/cluster/server0/temp/CBS/5/.B/3501/DCs/test/isrformtemp/_comp/gen/default/deploy/test~isrformtemp.sda with compression
         [timer] JarSAP finished in 0.461 seconds

    The Standalone DC has a deployable result (opposed to the Module DC) and should thus be deployed when an activity is successfully activated. Is automatic deployment perhaps disabled?

  • I am getting the error Installation came back with 17002 when installing Office 365 ProPlus from a network share

    I have gotten this error several times, but It works fine on most machines
    Here is the most recent example of the log file:
    Timestamp Process TID Area Category EventID Level Message Correlation
    08/08/2014 11:28:29.131 SETUP (0xef8) 0x1964  Click-To-Run amaxp Medium BaseConfigure::TryGetConfiguration: EULA's have been accepted. 
    08/08/2014 11:28:29.134 SETUP (0xef8) 0x1964  Click-To-Run aoh85 Medium AdminConfigure::HandleStateAction: Configuring an install/crosssell scenario. 
    08/08/2014 11:28:29.136 SETUP (0xef8) 0x1964  Click-To-Run aqdco Monitorable TryCheckNetworkCost::HandleStateAction: Failed to initialize NetworkCostManager for http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675.
    Assuming low cost and proceeding. 
    08/08/2014 11:28:29.136 SETUP (0xef8) 0x1964  Click-To-Run aoh9i Medium TryGetVersionDescriptor::HandleStateAction: Getting Cab: v64_15.0.4631.1002.cab 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run anwv6 Medium Descriptor::Load: Reading Available value from descriptor: 15.0.4631.1002 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run amawt Medium Descriptor::Load: Prereq Node exists. Being parsing it. 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run anwv7 Medium Descriptor::Load: Reading Bootstrapper value from descriptor: 15.0 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run amax8 Medium TryGetVersionDescriptor::HandleStateAction: Descriptor contains Prereqs. Run them now. 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed. 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run anwwb Medium IsNativeValidator::CheckPreReq: returning: 1. 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed. 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run an8w1 Medium O15BetaValidator::CheckPreReq: Validator has version descriptor 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run an8w6 Medium O15BetaValidator::CheckPreReq: No Office 15 installation detected. Prereq check passes. 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run an8xa Medium O15BetaValidator::CheckPreReq: returning: 1. 
    08/08/2014 11:28:30.131 SETUP (0xef8) 0x1964  Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed. 
    08/08/2014 11:28:30.146 SETUP (0xef8) 0x1964  Click-To-Run anwwn Medium SXSValidator::CheckPreReq: Cross bitness test passed. 
    08/08/2014 11:28:30.146 SETUP (0xef8) 0x1964  Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run anwwp Medium BootstrapperValidator::CheckPreReq: returning: 1. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run an8w0 Medium ClientValidator::CheckPreReq: returning: 1. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run anwwe Medium DiskSpaceValidator::CheckPreReq: Free disk space is sufficient. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run anhmm Medium Prereq::PrereqsFailed: No prereqs have failed. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run aoh9n Medium TryGetClient::HandleStateAction: Installation path is: C:\Program Files\Microsoft Office 15 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run amaya Medium TryGetClient::HandleStateAction: Looking for existing client. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run amayd Medium TryGetClient::HandleStateAction: Did not find an existing client. Downloading a new one. 
    08/08/2014 11:28:30.147 SETUP (0xef8) 0x1964  Click-To-Run aon8l Medium TryGetClient::HandleStateAction: Getting Cab: i641033.cab 
    08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964  Click-To-Run Telemetry amawv Medium MonitoredScope::ExecuteUnderStopWatch: TryGetClient::HandleStateAction: Getting Cab. Approximate duration: 499 milliseconds. 
    08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964  Click-To-Run amaye Medium TryGetClient::HandleStateAction: Found C2R Client in extracted cab. 
    08/08/2014 11:28:30.643 SETUP (0xef8) 0x1964  Click-To-Run aoh9t Medium TryLaunchClient::HandleStateAction: Launching OfficeClickToRun.exe with parameters: scenario=unknown acceptalleulas="True" cdnbaseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675"
    productreleaseid="none" culture="en-us" baseurl="http://officecdn.microsoft.com/pr/39168D7E-077B-48E7-872C-B232C3E72675" lcid="1033" platform="x64" version="15.0.4631.1002" updatebaseurl="\\server\share\Office365"
    updatesenabled="True" productstoadd="O365ProPlusRetail_en-us_x-none" trackedduration=499 
    08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964  Click-To-Run apx75 Monitorable TryLaunchClient::HandleStateAction: C2R Client returned failing error code 17002 
    08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964  Click-To-Run aoh72 Medium ExitBootStateMachine::HandleStateAction: Bootstrapper workflow exiting with result: 0x0 
    08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964  Click-To-Run aoh9z Medium AdminBootstrapper::Main: Installation came back with 17002. 
    08/08/2014 11:41:30.450 SETUP (0xef8) 0x1964  Logging Liblet aqc99 Medium Logging liblet uninitializing. 
    Anyone have any ideas what is causing it?
    I don't think it is permissions as I have seen on some forums because the share has read/execute permissions for domain users and domain computers

    Hi,
    Are you deploying Office 365 with the latest Office Deployment Tool? Try to download the latest version of ODT from below link, then try again:
    http://www.microsoft.com/en-us/download/details.aspx?id=36778
    A similar issue was resolved here, you might want to have a look:
    http://social.technet.microsoft.com/Forums/en-US/eeb7b577-7868-487a-851d-a6d8c1c6bbda/office-c2r-installation-error-17002?forum=officeitpro
    BTW, Microsoft Office 365 Community > Forums > Deploy Office 365
    is a better source for this kind of problem and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Bulk upload bug in ODAC 11.2 Release 5 (11.2.0.3.20) with Xcopy Deployment

    There is a bug in ODP.NET (ODAC 11.2 Release 5 (11.2.0.3.20) with Xcopy Deployment)
    When large amount of data is uploaded using OracleBulkCopy the following exception is thrown
    System.EntryPointNotFoundException: Unable to find an entry point named 'OpsBulkCopyFreeDataPointers' in DLL 'OraOps11w.dll'.
    at Oracle.DataAccess.Client.OpsBC.FreeDataPointers(OPOBulkCopyValCtx* pOPOBulkCopyValCtx)
    at Oracle.DataAccess.Client.OracleBulkCopy.PerformBulkCopy()
    at Oracle.DataAccess.Client.OracleBulkCopy.WriteDataSourceToServer()
    at Oracle.DataAccess.Client.OracleBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
    at Oracle.DataAccess.Client.OracleBulkCopy.WriteToServer(DataTable table)
    at OracleBulkUploadBug.Program.UploadData(OracleConnection connection)
    at OracleBulkUploadBug.Program.Main(String[] args)
    Steps to reproduce.+
    *1) Create a temp table*
    CREATE TABLE "RAM"."BLKUPLOADBUG"
    "COLUMN1" VARCHAR2(1000 BYTE),
    "COLUMN2" VARCHAR2(1000 BYTE),
    "COLUMN3" VARCHAR2(1000 BYTE),
    "COLUMN4" VARCHAR2(1000 BYTE),
    "COLUMN5" VARCHAR2(1000 BYTE)
    SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT
    TABLESPACE "USERS" ;
    *2) Run the following c# code*
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using Oracle.DataAccess.Client;
    using System.Data;
    namespace OracleBulkUploadBug
    class Program
    private const string TABLE_NAME = "BlkUploadBug";
    private const int ROWS_TO_INSERT = 10000;
    static void Main(string[] args)
    string ConnString = @"Data source=localhost/xexdb;User ID=ram; password=ram";
    try
    using (OracleConnection connection = new OracleConnection(ConnString))
    connection.Open();
    using (OracleCommand cmd = connection.CreateCommand())
    cmd.CommandText = string.Format("TRUNCATE TABLE {0}", TABLE_NAME);
    cmd.ExecuteNonQuery();
    Console.Write("Uploading data...");
    UploadData(connection);
    Console.WriteLine("done.");
    //ShowData(connection);
    catch (Exception ex)
    Console.WriteLine(ex);
    static void UploadData(OracleConnection connection)
    DataTable table = new DataTable(TABLE_NAME);
    table.Columns.Add("Column1", typeof(string));
    table.Columns.Add("Column2", typeof(string));
    table.Columns.Add("Column3", typeof(string));
    table.Columns.Add("Column4", typeof(string));
    table.Columns.Add("Column5", typeof(string));
    for (int i = 0; i < ROWS_TO_INSERT; i++)
    table.Rows.Add("aaa", "bbb", "ccc", "ddd", "eee");
    using (OracleBulkCopy oracleBulkCopy = new OracleBulkCopy(connection))
    oracleBulkCopy.DestinationTableName = table.TableName;
    oracleBulkCopy.WriteToServer(table);
    static void ShowData(OracleConnection connection)
    using (OracleCommand cmd = connection.CreateCommand())
    cmd.CommandText = string.Format("SELECT * FROM {0}", TABLE_NAME);
    using (OracleDataReader reader = cmd.ExecuteReader())
    while (reader.Read())
    Console.WriteLine("{0}\t{1}\t{2}\t{3}\t{4}",
    reader.GetString(0), reader.GetString(1), reader.GetString(2),
    reader.GetString(3), reader.GetString(4));
    }

    Hi Greg,
    Thanks for the detailed explanation. Let me start off by describing our current scenario.
    We deploy our application with its own set of Oracle driver files (ODP.NET). The driver files were picked from Xcopy deployment package ODAC 11.2 Release 4 (11.2.0.3.0). This works fine for users (50% of our 1000+ user base) who do not have any other installation of Oracle drivers. For the rest of the users who may have another version of ODP.NET (ODAC 11.2 Release 5 (11.2.0.3.20)), installed via Oracle Universal Installer (OUI) we have a problem.
    Since Oracle.DataAccess.dll and OraOps11w.dll files have the same version numbers in different packages it is making things very difficult for us. The application picks up Oracle.DataAccess.dll version 11.2.0.3.20 as it is present in the GAC and uses the local OraOps11w.dll 11.2.0.3.0 present in the application folder. This causes the missmatch and the exception gets thrown. Please do note that the exception pops up only when uploading large amounts of data using Oracle bulk upload.
    You can use my demo code and try it out for yourself. Install 11.2.0.3.20 using OUI and copy OraOps11w.dll from 11.2.0.3.0 to the local application folder, next to the EXE file. The exception is reproducible always when ROWS_TO_INSERT >= 10000. Reduce the ROWS_TO_INSERT to < 1000 or 100 and it will work flawlessly. I think the error message Unable to find an entry point named 'OpsBulkCopyFreeDataPointers' in DLL 'OraOps11w.dll' is incorrect.
    It is true that there are multiple versions of OraOps11w of differing patch levels that all show the same version number.+ Any particular reason to do this? How do you keep track of which fixes are present in which file if the version number never changes?
    Regards,
    Ram

  • How to force OSX to connect to a specific Access Point i.e. manually choosing beetween different APs with the same SSID?

    My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
    But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
    (I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
    Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
    Any idea how to force Mac to join a specific AP?
    Thanks,
    adso

    My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
    But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
    (I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
    Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
    Any idea how to force Mac to join a specific AP?
    Thanks,
    adso

  • SCCM 202 R2 - Automatic Deployment Rules

    Hi all,
    just got a question about the way in which the Automatic Deployment Rules work in SCCM 2012 R2. I've got a number of patching collections configured with different types of machines in (Pilot Group, Desktops, Test Servers, Prod Servers etc...) and was
    hoping to set up a corresponding ADR for each of these collections.
    Having had a quick test of the ADR, it seems to work well. When the Evaluation Schedule deadline hits, I see the updates are downloaded (watching RuleEngine.log) and then a new Software Update Group is created and is deployed to the machines
    in the collection.
    My question is, what's the best way to set up the ADRs to patch these collections? Does each patching collection need it's own ADR? If so, does this mean I will end up downloading the same updates multiple times since most of the ADRs will have the
    same Products/Classifications selected?
    Realise this is probably a fairly simple question but can't quite get my head round it so any help/info would be much appreciated!
    Cheers

    There really are three possible strategies here:
    - Use an ADR for each collection. This will of course cause duplicate update groups but will be fully automated.
    - Use a single ADR for each OS type; e.g., one for workstations and one for servers. Then manually add deployments to the appropriate ADR for each collection. This requires a bit of manual intervention but its not much and offers a QA checkpoint.
    - Use a single ADR targeting a master collection and then use maintenance windows to control deployment times to "sub-collections". This is fully automated as well but does require some manipulation of the maintenance windows on a month to month
    basis.
    I often do a combination of the above depending upon the exact needs of the environment.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • SCCM Automatic Deployment Rule Schedule

    Dear All,
    I have SCCM 2012 R2 running on Win2008 R2 Sp1. When I create an automatic rule, and later on I decide to change the Deployment Schedule, it wont save the changes.
    I wonder if this is some sort of bug.
    Thank yoiu

    Hi,
    Could you reproduce this situation on the same site?(create a new Automatic deployment rule, then edit it)
    How about on the another site with the same infrastructures?
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Automatic Deployment Rule - Error 5

    Hello,
    I'm experiencing an odd issue with setting up an automatic deployment rules. Everything looks like it's fine, but it's running into a permissions error on the location of the package. I enabled auditing and gave EVERYONE full access to the share and everything
    runs fine and verify that my admin account is the one writing. When I remove EVERYONE and designate the admin account with full share and full security permissions it gives back error 5 for permissions. Any ideas?

    An ADR runs with SYSTEM credentials and not with your admin credentials.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Automatic Deployment Performance (How long should it take?)

    I began an automatic deployment this morning. How long should it normally take?
    I setup the BC4J directories and libraries on the server in accordance with the bc4j2oc4j.sh script and made sure the admin.jar for both JDeveloper and OC4J are version compatible.
    What would slow down the process?

    Be sure you have performed the following:
    Unzip, in Solaris, the current release of JDev on same root as OC4J.
    Edit appropriately and run the <JDEV_HOME>\BC4J\bin\bc4j2oc4j.sh script in the OC4J_HOME on Solaris. Be careful! JDEV_HOME and OC4J_HOME should be on equal levels. Do not unzip JDev within OC4J.
    Ensure both 9iAS and JDev's (latest release) oc4j.jar and admin.jar are version compatible. Check the sizes and dates. Copy the OC4J's (latest release) oc4j.jar file to your <JDEV_HOME>\j2ee\home directory on the client not the server copy.
    Edit your .profile (Sun OS) setup PATH, JDK_HOME = my jdk1.3.1 from the "soft link", OC4J_HOME, and JDEV_HOME on the server.
    Be sure you have a "soft link" to JDK1.3 on Sun. Try typing java -version at the $ prompt on Solaris. It should say 1.3.1. If it does not work, most likely its Paths or Permissions to another JDK1.2, etc. Chown something... Find out how to do a "soft link" in Solaris. Its a default setting I think.
    Restart the OC4J and begin auto deploy.
    Thanks to all the Forum experts for your contributions to my success.
    Arnold Angel
    [email protected]

  • Abobe CCP installer packages failing with DW040 errors

    At my company, we are running into problems with some Creative Cloud installer packages for Mac created with CCP, some of the time.
    When installing the package locally from the desktop, the Installer.app fails with this message:
    'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'
    An example of the Adobe Setup Error.log is attached. It includes:
    ERROR: DW040: The product "{C3409B0A-ACE8-11E2-9ED3-A79B9175A9A8}" is not installed. Cannot proceed with the uninstall
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    Exit Code: 33 - The product is not installed, cannot uninstall.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...
    Similar messages with other product IDs occur appear in the log.
    The package that I’m having this issue with was built with the following components:
    Bridge CC
    InCopy CC
    InDesign CC
    Illustrator CC
    Photoshop CC
    Is anyone familiar with this error and is there a way to resolve?
    Thanks,
    M.K.

    Moving this discussion to the Enterprise Deployment for Creative Cloud, Creative Suite forum.

Maybe you are looking for