Installation of AWE32 Software on Windows

Hi:
Can anyone advise me how to install the AWE32 Software on WIN-XP? I have been very successfully using this old AWE32 on Windows 98SE but I have problems in installing?it on WIN-XP: is there a driver which would allow to install the AWE32 on WIN-XP? Any advice and information how to resolve these installation problems would be greatly appreciated ...!
Thanks.

Thanks for your reply, Katman!
Could you be more specific what 'default Windows XP drivers for the Awe32'?I should use for installation of the AWE32 Software? When I checked through the Device Manager in WIN-XP (I'm running a DUAL-BOOT Config with WIN98SE in main Partitions C:?& D, and the WIN-XP is installed in a separate Partition), the Sound Blaster is listed correctly, and the Hardware does NOT?shows any conflict. However,?as I stated before the AWE32 Software (with all the additional 'Subprograms') is working perfectly in WIN98SE Partitions BUT WIN-XP does NOT allow me to install the AWE32 Software?which has some very needed features, e.g. the GS-Drums Patch Kit'swhich offers?the sound of Drum Brushes?which is NOT available in the Standard GM Midi Kit.
I would greatly appreciate any of your further advice. THANKS!?

Similar Messages

Once windows installed in partitioned disc and run the installer for support software only get BSOD when restart. Help!

I've tried reintstalling about 3 times, changing order of operations, still get blue screen.
When I install windows and follow all directions it works fine. Once I install the apple provided support drivers and the computer restarts it manages to stay on for about 15 seconds before blue screening.
MacPro Mid2010 2x2.4Ghz
16 gigs of ram
2 - 5770 Ati radeon 1024 MB video cards
I have latest lion updates and ran the updater
I have a brand new windows 7 installation disc, i have tried both 32 bit and 64.
boot camp that is in my OSX is 3.0.4 (322), but it does download the support software for windows which i save in a separete usb stick.
and I am doing the partition on a relatively new hard drive 500 gigs thats been partitioned.
Any Ideas?
I've attached of a photo of the blue screen message.
Cheers,
Paco

Pull all the other hard drives?
Upgraded to Boot Camp 3.3 already?
Have an Apple software RAID on other drives - AppleHFS and AppleMNT to mount and read HFS volumes - is buggy
you didn't burn the DVD from ISO etc right?
Safe Boot and rename AppleHFS.sys and MNT to .sys.old
Install MacDrive instead to access HFS
Who what or how did you partition the drive? normally I would just use Windows 7 DVD and not use BCA or share the drive with OS X.

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tri

Windows 7 crashed after Creative Suite 6 Design and Web Premium completed an update. The only Windows restore point that worked was pre-installation of CS6 software. Now when trying to reinstall I get the 'installer failed to initialize' message. Have tried using the CC Cleaner Tool but nothing works? Any solution please. Was new computer and newly purchased CS6 software downloaded 2 days prior to the upgrade.

make sure you follow all the steps here, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Failed to load DLL: HSAPI during Software Installation of Palm TX for Windows XP

I have been attempting to load Palm TX software for Windows XP and receive error number: 0x80040702 Failed to load DLL: HSAPI. I am able to download the zipped software from the Palm site. After unpacking and beginning installation, I receive the error mentioned above. Any ideas?
Thanks!
Post relates to: Palm TX

I have been trying to REinstall PalmOne (on to Windows XP) and getting precisely the
same message ie 'error no 0x80040702 - failed to load dll:HSAPI' ... nobody seems to be able to help.
Any suggestions please ???

Embed integrator software on Windows OEM installation CD.

I represent multinational company that installs a software product on a computer with Windows 7 OEM operating system.
I wonder if it is possible to generate a Windows installation CD that contains the installation of my software product embedded, and also some specific driver installations and any changes to the registry.

Hi,
You can use MDT to finish this job, here is an example using MDT deploy a Windows 8.1 image.
Deploy a Windows 8.1 Image Using MDT 2013:
ttps://technet.microsoft.com/en-us/library/dn744279.aspx?f=255&MSPPError=-2147217396
Another example:
http://blogs.technet.com/b/askpfeplat/archive/2014/08/04/mdt-2013-part-i-mdt-configuration-capture-a-windows-server-2012-r2-base-os-image.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error while installing itunes software on windows vista 32 bit operating system.

Hi friends,I am getting an itune installation error,Microsoft.VC80.CRT.version=8.0.50727.4053,The operating system in windows vista,i donwloaded itunes with IE as well as firefox,but always same error message is coming.Please help me out with this error.

I browsed this page earlier, and now im back to explain how i fixed my problem which is similar to yours.
All of the below must be followed manually: (that windows msgbox error is just confusing you) be reminded that:
%appdata% is not a network location. It is a systemwide variable used by Windows OS. %appdata% is a directory on your computer
I have win 7 OS, and i tweaked the below values so the Nokia_PC_Suite will install:
follow ALL of the following one by one:
-----first, the package----
first, go to the file which you downloaded from the net, (usually: Nokia_PC_Suite_eng_web.exe) right click the file and click properties, then click the compatibility tab and tick "Run this program in compatibility mode for:" then (select your OS on drop down box) then also click the lowermost button, "Run this program as administrator" then click OK. and close the properties box.
----second, the registry----(carefull a little mistake will render your machine unusable, so don't mess inside registry)
enter your registry by >> Start > Run > "type" regedit (without the word type) expand the following:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders, (on the right pane) you will see AppData, double click AppData and change the value to: %USERPROFILE%\AppData\Roaming
do the above to below location also: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion\Explorer\User Shell Folders
----third, Windows environment variables----
in your windows, right click the "My Computer", then click "Properties" then click the Advanced tab, on the lowermost of the window click the button [Environment Variables], click edit and change the value of "Temp" to variable value: %USERPROFILE%\AppData\Roaming.
Now double click (re-install) the Nokia package which you have downloaded from Nokia website and i hope it will install flawlessly this time

Problem with HP 6500-E709n Wireless software on Windows 7 64-bit

How do I, or should I, uninstall Microsoft xps printer before installing HP 6500-E709n software on Windows 7 64-bit?
I have tried installing, uninstalling & reinstalling the software twice now and am preparing for a third installation. I inadvertently left the wireless printer on during the first installation & eversince then, I've had to physically unplug the printer to get it to shut off. Now, the printer will only shut off with the power button if I hit it before the wireless light comes on. I cannot get the printer key pad keys to function at all, other than turning the power on & off as described above.
Up to now, I had been using a wireless network flawlessly with a NETGEAR router, untill I tried to install the HP software on my Windows 7 64-bit unit. Now my other computers no longer find the printer....I get the message the printer is off line.
I have currently unistalled all the HP software and rebooted for the third time. The Microsoft XPS printer now shows as the default printer...& I can't find it in the add-remove program list. Do I need to uninstall it before installing the HP software, or is my problem with the eprom firmware?

How do I, or should I, uninstall Microsoft xps printer before installing HP 6500-E709n software on Windows 7 64-bit?
I have tried installing, uninstalling & reinstalling the software twice now and am preparing for a third installation. I inadvertently left the wireless printer on during the first installation & eversince then, I've had to physically unplug the printer to get it to shut off. Now, the printer will only shut off with the power button if I hit it before the wireless light comes on. I cannot get the printer key pad keys to function at all, other than turning the power on & off as described above.
Up to now, I had been using a wireless network flawlessly with a NETGEAR router, untill I tried to install the HP software on my Windows 7 64-bit unit. Now my other computers no longer find the printer....I get the message the printer is off line.
I have currently unistalled all the HP software and rebooted for the third time. The Microsoft XPS printer now shows as the default printer...& I can't find it in the add-remove program list. Do I need to uninstall it before installing the HP software, or is my problem with the eprom firmware?

Oracle Installation or Uninstallation Solutions For Windows 95/98/2000/ME/NT/XP

You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY
Best Regards,
Beau Leo

Hi,Beau Leo, I am having problem installing Oracle9i Database Rel.2 on my pc.
I read the suggestion and solution you posted for fixing Oracle 8.1.x installation
probblem, and since my pc also hung at 48% while installing Oracle 9i software,
I wonder if the same problem in the Oracle8 Vs.Pentium4 also exists for Oracle9i.
I have Windows2000,256RAM, Pentium3 1Ghz, and 13.8 free diskspace. But the installation always
hangs at 48%, my computer will just shut down and restart automatically without
even showing an error message. I have tried installing the Enterprise edition for 3
times already but everytime encountered the same problem. I've also tried custom installation
by selecting not to create database, but it also hung.
Before I started each installation, I always made sure that my registry and environment
path are cleared and that all the partially-installed Oracle files are deleted.
I hope that you or anyone who has a solution for this problem could be so kindly to help me out.
Thank you in advance.
ailee

Having software problem, Windows 7 Home, how to format and reinstall

Having software problems, Windows 7. I have the HP P6510 desktop. I have backed up my data to ext. drive, and I have the Windows 7 Home CD which I purchased.
Most of the reading I've done to "format & reinstall" seem to say I don't need to format...just put the Windows 7 CD in and restart...is that all I have to do...I don't have to format the HD?
If I have to "format" the HD, how?
PS:(Last time Computer was in for repair, they replaced the Windows 7 program so product numbers may be different.)

Hi:
You may want to read this step by step tutorial to install W7.
http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-1.htm
However, to answer your question, you should not need to repartition or format the hard drive unless you want to.
Windows 7 will install on the current windows partition creating a windows.old folder, which you can delete after W7 is installed.
Having the windows.old folder is nice for folks like me who forgot to save a file or folder. You can just browse to the Windows.old folder and retrieve any file or folder you want and copy it to the new windows installation.
When you are sure you have gotten all of your files from the windows.old folder you can delete it by launching the disk cleanup utility and then click on the Cleanup System Files button in the disk cleanup window.
Then just check the windows.old folder on the list of files and it will be deleted once you hit the OK button.
If you delete partitions and reformat, you will lose the option of having the windows.old folder.
The tutorial at the link above will step you thru the process of formatting the drive.

Unable to install photoshop elements 13 on new computer. Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

Unable to install photoshop elements 13 on new computer (Windows 8.1 OS). Error message is: This installer does not support installation on a 64-Bit windows operating system. Please download the 64-Bit version of photoshop elements. How do I do this?

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Problems installation Photoshop Elements 8 on Windows 7

I tried to install Photoshop elements 8 on my Windows 7 computer, but the installation gives a failure after a certain time. A file "...cab" is not working and may be corrupt ( exact failure code I can give, if necesary). Is there any possibility to get this file or the program Photoshop Elements 8 as download file so that I can complete the installation? Thank you in advance for your answers.

Hello,
I just got the same problem already some time ago when I tried to install this programm in my computer. At that time (March 2012) the program crashed my computer, I had to reinstall all the Software completely including system software. The program I purchased in December 2011 from Amazon together with a Reflecta crystal Scan slide scanner as bundle, so I thought it will work.
I will try to install the program from the download link you gave me, in case it does not work, what can I do next without having to buy a newer version?
Regards
Franz-Josef Laven
Date: Tue, 6 Nov 2012 14:57:39 -0700
From: [email protected]
To: [email protected]
Subject: Problems installation Photoshop Elements 8 on Windows 7
Re: Problems installation Photoshop Elements 8 on Windows 7 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
You can download a fresh copy of the install files by following the directions listed at http://prodesigntools.com/direct-download-links-for-lightroom-3-and-ph otoshop-elements-8.html.
I am curious did you have this installed previously or did you just purchase a copy of Photoshop Elements 8?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4828039#4828039
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4828039#4828039
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4828039#4828039. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Issue while Installing Oracle Data Access Software for Windows

All,
Iam getting the following error while installing Oracle Data Access Software for windows. Iam installing in WindowsXP, with Oracle 9i release 9.2.0.7.0 DB and client in the same Box.
It shows
The Specified Key key was not found while trying to GetValue
* Stop installation of all Products
* Stop installtion of this componenent only.
Kindly let me know why this error is showing up.
Regards
Ramesh

Most probably you have hit this issue:
"If you have more than one Oracle Home installed on the same machine (e.g. Oracle8i client and Oracle9i Release 2 client), use the Oracle Home Selector to run your applications with Oracle9i Release 2 client. "
As documented on the Oracle Data Access Software for Windows. Release 9.2.0.4.0
~ Madrid.

Software update window never progresses

i saw similar topics in the 10.5 troubleshooting page (http://docs.info.apple.com/article.html?artnum=307005), but nothing exactly like mine.
i'm using OS 10.5.1 now. i've tried to install OS 10.5.2 several times, but every time i do it never progresses. The "software install" window gets stuck on "Installing 1 Item", and the progress bar never moves, and the words "Configuring Installation" appear under the progress bar. What I do?!

I have a similar issue. My Software Update never loads, it takes a very very long time and then times out. thanks.

Sync BB desktop software with Windows 7 64 bit

Dear Friends, I am rally stuck here. I just bought a new laptop with MS office 10 and windows 7, 64 bit. I was earleir using xp and was able to sync my phone with laptop very easily. Now after buying the laptop I just realised that I am not able to sync my BB software and my phone and not able to transfer my data to my laptop.
I tried downloading outlook but it is not getting done, sighting, not possible. I also tried syncing with Morzilla and windows live as well But the desktop software just not identifying neither of them.
Can some one please help me here, in how to sync my phone to my laptop with windows 7 and transfer my contacts and calender on to my laptop.
Other wise I will have to throw away my BB and buy some other phone.
Regards
rohit

Hi and Welcome to the Community!
First off, you must have installed one of the compatible Desktop Organizer apps:
KB12268Applications supported by BlackBerry Desktop Software for Windows for synchronization
Attempting to use anything NOT on that list will, of course, fail.
Secondly, you must have not have Outlook installed as "Click To Run":
KB24040 Support for Microsoft Office 2010 Click-to-Run installation
If you have it installed in that manner, you must correct that.
I have no idea how your prior machine was configured, but I know 100% that you can synchronize to a Win7X64 Laptop with Outlook 2010...I do it all the time.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Installation of AWE32 Software on Windows

Similar Messages

Maybe you are looking for