Installation of BOBJ 3.1 on Windows 2008 in HA enviroment.

Salaam All ,
Hope you all are doing fine ..
We are trying to install BOBJ in HA environment . We have configured DB ( oracle) for failover .But we have no clue of deploying web services in HA .
Please help me with Suitable Step-by-Step guide .
Warm regards,

Hello,
there is no step-by-step guide from SAP side cause this is out of scope of the SBOP Product. If you can proceed as follows (high level)
1. Do a full installation on Server1
2. Do a full installation on Server2
3. Create a BOE Cluster
4. Place a HTTP Load Balancer in front of Server1 and Server2
A HTTP LB is also out of scope of the SBOP Product line.
The LB configuration is usually done by the network team. Please note that this is a very basic setup...more complex setups are possible but therefore more details would be needed about your requirements of the SBOP deployment.
Regards
-Seb.

Similar Messages

Does Windows 2008 Server run ok under Mac Mini Bootcamp?

Does anyone have any experience of installing and running Windows 2008 Server on a Mac Mini (of which has either Mac OS or Mac OS Server installed), under Bootcamp?
I currently have an old Dell with Windows 2008 server which acts as my Domain Controller, Exchange Server for a small home-office network. It's due an upgrade as the hardware is so old (and noisy!) and like the idea of having a nice compact, quiet Mac Mini, but want to make sure it can carry out the same duties under bootcamp on Win2008?

Windows 2008 can be installed in Boot Camp. However I don't believe it is officially supported by Apple so there may or may not be issues with installing the Boot Camp Drivers (or future updates to the Boot Camp drivers.) Not something I'd be recommending for a "production" environment. If this is a test/dev system, then probably worth trying, depending on how critical your network uptime is.
Also, you didn't mention if your Dell came with Windows 2008 preinstalled, but if it did, then likely it has a "branded" version of Windows that won't activate correctly on non-Dell hardware. (If your Windows disks have "Dell" on them, they won't work with the Mac.) So you may need to purchase a retail or volume license copy of Windows 2008.
In general, for a server running as a DC & Exchange, you'd want RAID1 as a minimum so that would be the Mac Mini Server, not the "desktop" Mac Mini. Unless you have one lying around, you're looking at something around $1500-$2000 to start, depending on whether you can transfer your existing Windows 2008 & Exchange installations. (Another $500-$2000 depending on what vesions of Windows & Exchange.) And probably 8GB of RAM since Windows 2008 & Exchange on 4GB is pushing it. Considering the costs, I suggest you look at the Dell T110 series or the HP Proliant 110 series. Both lines are very quiet and are supported for Windows 2008 from the factory, including Windows Small Business Server, which includes Exchange. While not as small as a Mac Mini, they are mini towers and about the size of a typical PC desktop.
If you really wanted a small footprint, then HP has a "microserver" series. You'd probably need to call HP to get the build you want as the online ordering is limited for that model. From Dell, there is the Zino model desktop. Again, not supported for a "server", but you were going to consider a the non-server version of the Mac Mini, then the Zino has at least a chance of you reusing your existing versions of Windows if they're Dell branded, thus saving your something in the range of $500-$2000 for new software. (But I would NOT recommend a non-server chassis without RAID1 hard drives, so the Zino is not my choice. I just offer it as a possibility if you accept the risk of an unsupported installation, as would have been installing Windows 2008 in Boot Camp.)
So yes, it will work. But I wouldn't recommend it for a production environment, especailly if you have the "desktop" computer without RAID1.

CRM 7.0 installation failed on Windows 2008 R2 SQL Server 2008 SP1

Hello I'm currently trying to install CRM 7.0 on a windows 2008 R2 (64B) plateform with SQL Server 2008 SP1 as database engine
while launching sapinst.exe i'm facing this issue that i cannot get rid of it
Could someone Help , would really be appreciated as i'm a newby on SAP world
thanks a lot
Unable to start a service execution. Please check the following information for the possibble reason and inform the installation development : Opened sylib701_1.dll exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Opened C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iaguieng701_1.dll receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value 'C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/jre'. exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Opened C:/Users/SAPINS~1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iakdblib701_1.dll This is SAPinst, version 701_1, make variant 701_REL, build 1015514 compiled on Oct 3 2008, 01:51:15 MessageLib initialized successfully. showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 169.254.138.68 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Windows\System32\x. Removing file C:\Windows\System32\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/> Waiting for an answer from GUI current working directory is C:/Windows/System32 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Unable to open URL file://C:\Windows\System32\control.xml. The execution will be terminated now.

Hi!
Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released, so you may get it to run technically but not everything is tested and so, you should not install any SAP system on it!
In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
See [SAP note 1383873|https://service.sap.com/sap/support/notes/1383873] ("Windows Server 2008 R2 Support").
You can be always up to date with the latest Windows news at:
[SAP on Microsoft Windows|SAP on Microsoft Windows] --> Support of Microsoft Windows Server 2008 R2
Cheers!

11g GC Installation Problem on Windows 2008

Hi All
I am facing a problem installing 11GC on Windows 2008. The installer will not get past "Step 12 - Agent Configuration Assistant" - it shows as FAILED.
My setup is as following:
- GCSERVER: where I am installing GC - Windows 2008 R1 32-bit (Actually a VMware VM)
- DBSERVER: where em repository db resides - Windows 2008 R1 64-bit (Physical Server)
The steps I have followed:
- Created a new database called emrep111 (11.1.0.7) on DBSERVER
- Installed WL Server (10.3.2) on GCSERVER
- Run GC 11.1.0.1.0 for Win32 on GCSERVER and then get error
I have to cancel the installation at this stage, however, I would have expected by the time it gets to this stage it would have done the important stuff, however, when I browse to the EM URL I get "Backend WLS or EM application seems to be down".
If anyone has any experience of 11g GC on Windows I would be grateful if you have any advice on Troubleshooting this problem.
Regards
Alan

Hi All,
a short intermediate result:
Oracle Support is working on the problem. Today they asked me to perform the following action:
set EM_SECURE_VERBOSE=true
+<agent_home>\bin>emctl secure agent+
If you take a look at the generated log file '<agent_home>\sysman\log\secure.log' you can see that OMS does not respond correctly:
[27-07-2010 10:06:50] USERINFO ::Securing agent... Started.
[27-07-2010 10:06:50] DEBUG ::Executing ... D:\oracle\product\em\agent11g\jdk\jre/bin/java -cp D:/oracle/product/em/agent11g/jdbc/lib/ojdbc5.jar;D:/oracle/product/em/agent11g/lib/xmlparserv2.jar;D:\oracle\product\em\agent11g/sysman/jlib/log4j-core.jar;D:/oracle/product/em/agent11g/jlib/share.jar;D:/oracle/product/em/agent11g/jlib/http_client.jar;D:/oracle/product/em/agent11g/jlib/jssl-1_1.jar;D:/oracle/product/em/agent11g/jlib/ojmisc.jar;D:/oracle/product/em/agent11g/opmn/lib/optic.jar;D:\oracle\product\em\agent11g/sysman/jlib/emagentRT.jar;D:\oracle\product\em\agent11g/sysman/jlib/emagentSDK.jar;D:/oracle/product/em/agent11g/lib/dms.jar;D:/oracle/product/em/agent11g/lib/dmsEmd.jar;D:\oracle\product\em\agent11g/sysman/jlib/emcoreAgent.jar;D:/oracle/product/em/agent11g/modules/oracle.http_client_11.1.1.jar -DEMSTATE=D:\oracle\product\em\agent11g -Ddebug=true oracle.sysman.emctl.secure.agent.SecureAgentCmd
2010-07-27 10:06:56,352 [main] INFO agent.SecureAgentCmd secureAgent.226 - Requesting an HTTPS Upload URL from the OMS
2010-07-27 10:06:56,368 [main] INFO agent.SecureAgentCmd openPage.829 - Opening: https://BTNDBSRV4.btnntdom.local:1159/em/genwallet
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd openPage.855 - Response Status Code: 200
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd openPage.863 - RESPONSE_STATUS header: null
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd openPage.864 - Response body: <head><title>OMS is unavailable</title></head><body><br><br><div align=center><b><font size=5>Backend WLS or EM application seems to be down</font></b></div></body>
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd getOMSSecurePort.809 - Non-numeric response obtained: <head><title>OMS is unavailable</title></head><body><br><br><div align=center><b><font size=5>Backend WLS or EM application seems to be down</font></b></div></body>
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd getOMSSecurePort.811 - OMS Secure Port: -1
2010-07-27 10:07:15,166 [main] ERROR agent.SecureAgentCmd secureAgent.231 - The OMS is not set up for Enterprise Manager Security.
2010-07-27 10:07:15,166 [main] ERROR agent.SecureAgentCmd main.210 - Failed to secure the Agent:
java.lang.Exception: The OMS is not set up for Enterprise Manager Security.
at oracle.sysman.emctl.secure.agent.SecureAgentCmd.secureAgent(SecureAgentCmd.java:232)
at oracle.sysman.emctl.secure.agent.SecureAgentCmd.main(SecureAgentCmd.java:203)
I'm curious about the next steps from Oracle Support.
Best rgds
Kai

Iscsitarget installation fails on Windows 2008 R2 server

Dear All
We have windows 2008 Server which is also DC server. I am trying to install iscsitarget utility which I downloaded from Microsoft site. I want to configure the server as iscsi target and map the disk space to another server as disk volume.
The installation fails as it says ' due to some error' there is no explicit entry in the event viewer also. The iscsitarget is version 3.3.
We have installed all the applicable updates from Microsoft updates. ANy alternatives are available?
Shekhar-nsk

Hi,
Follow your description, I also download Microsoft iSCSI Software Target 3.3 on my Windows Server 2008 R2 and
install it. However, it succeed.
àThe installation
fails as it says ' due to some error'
Would you please let me know the complete error message that you can get? Or provide a screenshot of it?
(please hide all protected or private information.)
Meanwhile, would you please let me know where you download the Microsoft iSCSI Software Target 3.3? Please
download it from following link and
perform a clean boot, then check if install successfully in clean boot.
Microsoft iSCSI Software Target 3.3
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Installer 4.5 Error while installing in windows 2008 32 bit

In windows 2008 server (standard edition), i am trying to install the exchange server 2007 sp2 before that i need to install the windows installer 4.5 to install my exchange server 2007sp2, while installing the windows installer 4.5 system showing the error
message as " Not enough storage is available to process this commend".
If any one pls give some suggestions as soon as is appreciative.
[email protected]
thanks
Shahul Hameed

Hi,
The error message occurs if you are trying to use a private and undocumented SetupAPI function that isn’t supported in Windows Server 2008. Please
visit the following link for detailed information:
Misleading error message when you install an update package in Windows
Vista or in Windows Server 2008: "Not enough storage is available to process this command"
Please download the right version of Windows Installer 4.5 for Windows Server 2008 x86, you can download it from the following link:
Windows Installer 4.5
Best Regards
Dale
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Oracle 11g installation issue on windows 2008 -64 bit

I have downloaded the Oracle DB Server software from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/111070-win64-2008soft-084715.html:
Oracle Database 11g Release 1 (11.1.0.7.0)
for Microsoft Windows Server 2008 x64
win64_11gR1_database_111070.zip (2,014,141,880 bytes)
The installer always fails with the following:
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
========================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
I am using Windows 2008R2 -64 bit and not Windows Vista. Any idea?

Hi;
Oracle Certified versions for 2008R2:
Oracle 11.2.0.x
Oracle 10.2.0.5 (See Note 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2)
For Oracle 11gR1:
For MS Windows 2008, you can select either:
(11.1.0.7.0)
Microsoft Windows Server 2008 (32-bit) (1.9 GB)
Microsoft Windows Server 2008 x64 (1.9 GB)
For details see:
Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1? [ID 740926.1]
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Regard
Helios

Oracle ebs installation on windows 2008 R2

Hi Hussein,
I am doing oracle EBS installation on windows 2008. As per installation doc below are the pre-requisite
The Prerequisites Software are:
1.Chose and Operating System windows 2008 (32 bit):
Select the Windows Operating system and install it. After installed OS successfully need to change DNS entries or Active Directories as per your environment.
2.Install the Microsoft Visual C++ 2008 software.
See the post for installation of – Microsoft Visual C++ 2008
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Regards,
Raj

hi Raj
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Yes go for cygwin
please see
Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows[Article ID 414992.1]
Oracle E-Business Suite R12 Installation Steps on Windows XP
;) AppsMAstI :)
Sharing is Caring

MAPToolkit 9.1 Installation on Windows 2008 R2 Std SP1 64-bit fails

Hi,
I tried an installation of the MAPToolkit V9.1 on Windows 2008 R2 SP1 with an SQL Server 2012 MAPS instance installed, but it fails with:
Applying execute package: MAPSetup_x64.msi, action: Install,
path: C:\ProgramData\Package Cache\{D1E2ED68-9318-49A7-8B8A-7E8B5A2ADA29}v9.1.265.0\MAPSetup_x64.msi
, arguments: ' ARPSYSTEMCOMPONENT="1" MSIFASTINSTALL="7" INSTALLDIR="D:\Apps\Microsoft Assessment and Planning Toolkit"
TRANSFORMS="" CEIPENABLED="0" LOCALDBDROP="0"'
e000: Error 0x80070643: Failed to install MSI package.
e000: Error 0x80070643: Failed to execute MSI package.
e000: Error 0x80070643: Failed to configure per-machine MSI package.
i319: Applied execute package: MAPSetup_x64.msi, result: 0x80070643, restart: None
e000: Error 0x80070643: Failed to execute MSI package.
i318: Skipped rollback of package: MAPSetup_x64.msi, action: Uninstall, already: Absent
i319: Applied rollback package: MAPSetup_x64.msi, result: 0x0, restart: None
Any idea?
Thanks in advance!

This log is coming from the installation log file Microsoft_Assessment_and_Planning_Toolkit_20140731105729.log
There is a second log with the name Microsoft_Assessment_and_Planning_Toolkit_20140731105729_0_MAPSetup_x64.msi.log
I see the following messages in this file:
Action start 10:57:49: RegisterProduct.
MSI (s) (B0:D0) [10:57:49:136]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (B0:D0) [10:57:49:136]: Doing action: PublishComponents
MSI (s) (B0:D0) [10:57:49:136]: Note: 1: 2205 2: 3: ActionText
Action ended 10:57:49: RegisterProduct. Return value 1.
MSI (s) (B0:D0) [10:57:49:137]: Note: 1: 2205 2: 3: PublishComponent
MSI (s) (B0:D0) [10:57:49:137]: Note: 1: 2228 2: 3: PublishComponent 4: SELECT `PublishComponent`.`ComponentId`, `PublishComponent`.`Qualifier`, `PublishComponent`.`AppData`, `Feature`, `Component`.`ComponentId`, `Component`.`RuntimeFlags` FROM `PublishComponent`,
`Component`, `Feature` WHERE `PublishComponent`.`Component_` = `Component`.`Component` AND `PublishComponent`.`Feature_` = `Feature`.`Feature` AND ((`Feature`.`Action` = 1 OR `Feature`.`Action` = 2) OR (`Feature`.`Action` = 4 AND `Feature`.`Installed`
= 0) OR (`Feature`.`Action` = 3 AND (`Feature`.`Installed` = 1 OR `Feature`.`Installed` = 2 OR `Feature`.`Installed` = 4)))
Action start 10:57:49: PublishComponents.
MSI (s) (B0:D0) [10:57:49:137]: Doing action: _ConfigureDatabase
MSI (s) (B0:D0) [10:57:49:137]: Note: 1: 2205 2: 3: ActionText
Action ended 10:57:49: PublishComponents. Return value 0.
MSI (s) (B0:7C) [10:57:49:139]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI3BF8.tmp, Entrypoint: ConfigureDatabase
Action start 10:57:49: _ConfigureDatabase.
CreateStartInstance: Failed to start instance.. Error Code: 0x89C5010A.
ConfigureDatabase: CreateStartInstance failed. Error Code: 0x89C5010A.
CustomAction _ConfigureDatabase returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (B0:D0) [10:57:49:278]: Machine policy value 'DisableRollback' is 0
Action ended 10:57:49: _ConfigureDatabase. Return value 3.
MSI (s) (B0:D0) [10:57:49:279]: No System Restore sequence number for this installation.
MSI (s) (B0:D0) [10:57:49:279]: Unlocking Server
Action ended 10:57:49: INSTALL. Return value 3.
Property(S): DiskPrompt = Microsoft Assessment and Planning Toolkit Installation [1]
Property(S): UpgradeCode = {39243C24-3EA1-473D-8240-3646837D0EC7}
Property(S): PROCESSOR_ARCHITECTURE_VALUE = AMD64

OBIEE 11.1.1.6.0 installation on windows 2008 R2 64 bit failing

I installed OBIEE 11.1.1.6.0 version on windows 2008 R2 64bit;installation has no issues all went well and sample app displayed fine.But, i see scheduler is not starting and also we deployed our code but reports failing with following oracle oci error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: The specified module could not be found. [nQSError: 46029] Failed to load the DLL D:\OBI11G\Oracle_BI1\bifoundation\server\bin\nqsdbgatewayoci10g64.dll. Check if 'Oracle OCI 10G' database client is installed. (HY000)
i also installed and verified by installing 11g client;PATH variable setting etc. no exact solution.i would like to see if any other also facing same issue with OBIEE 11.1.1.6 on windows 2008 R2 64 bit OS.
Thanks

Deva
i didnt get what you mean by rpd client.,if you mean Admin tool, installation is OBIEE 'simple installation' type which includes Admin tool.
coming to connectivity, no from physical layer you cannot view data as the packaged dll file (nqsdbgatewayoci10g64.dll ) is not registering in Windows 2008 64 bit,which i even tried manually.
since above step is failing, i also installed a 11g db client(to divert oci connections) which is working fine for oracle connectivity and updated PATH environment variables but this issue is still in place.. as reports still pointing to Oracle_BI1/bifoundation/server/bin/ dll files
please share your thoughts

Oracle 10g Installation Error on Windows 2008 server

Hi Experts,
I have tried to install Oracle 10g via "51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008" as per note no. Note 1303262 - Oracle on Windows Server 2008. Server is 64 bit server.
Oracle service is not getting started and showing as "starting" in services.msc. I cant stop the service. I have taken the restart of the server as well but no luck.
Just before the end of installation of Oracle, one pop up box named isqlplussvc opened up stating as "Failed to start the service, Error:0, the operation completed successfully".
Can you please suggest how to handle this error and start the service?
Regards,
Naresh.

Hi All,
Yes, I started with Failsafe server CD only. After trying installing Oracle couple of times, once the service didnt went into starting mode & it couldnt start as well. Then I started going ahead with SAP installation and later I found that the service got automatically started.
I was under the impression that the service has to be started before going for SAP installation.
Thanks all for your replies.
Regards,
Naresh.

10g BI publisher installation getting error in windows 2008 R2 64bit

HI Friends,
I am trying to install the 10.1.3.4.1. and 10.1.3.4.2 in the windows 2008 R2 64bit server.
At the running the setup.exe file its checking and getting passed in the pre-requites.
And its not opening the installer graphical utility instead of that its showing an error like
"setup.exe has stopped working
windows can check online solution of the problem
close the program"
I have downloaded the software from the following location in the OTN,
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.htmlBI Publisher 10.1.3.4.2 for Windows (32/64 bit) (1 GB)
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.htmlBI Publisher 10.1.3.4.1 for Windows x86 (765 MB)
Please suggests us to move further..
Awaiting for the reply.
Regards
Kumar

Hi
1. Installed RCU first see the link bleow
http://lamont-consulting.com/index.php/blog/obiee/11g/107-obiee-11g-rcu-install
The RCU will communicate with OBIEE
when you install obiee some information needed regarding the RCU.
2. Installed OBIEE see the link below
http://allaboutobiee.blogspot.com/2012/04/obiee-111160-step-by-step-installation.html
i have 3 machines
1. I have windows server 2008 64bit, Oracle Database 11g installed
2. I have windows server 2003 32 bit, RCU and OBIEE installed
3. I have windows XP SP3 32 bit, OBIEE desktop installed.
i hope the above links will help you.
if you have any queries, get back to me .. .

Windows 2008 r2 sp1 installation error 0x800f081f

I have two servers that are nearly identical running Windows 2008 R2. Both are Hyper-V hosts. I have applied SP1 to one of them, but am having problems getting SP1 to install on the 2nd one. The downloaded installation fails with 0x800f081f.
I have found
posts that refer to the Remote Server Administration Tools (RSAT) but since this is NOT Windows 7 and I have not installed the RSAT tools, I am at a loss.
I have also found
this thread that seems to be similar to my issue, except the O/S is Windows 7 instead of Windows 2008 R2.
I can see the failure in the CBS.log file, but don't know how to troubleshoot this problem.
2011-03-03 21:38:06, Info                  CBS    Calling client to resolve source, cannot find file 'TsUsbGD.sys' at path: \\?\C:\Windows\Servicing\Packages\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816\TsUsbGD.sys
2011-03-03 21:38:06, Error                 CBS    Exec: Failed to pre-stage package: Package_for_KB976933~31bf3856ad364e35~amd64~cs-CZ~6.1.7601.17514, file: TsUsbGD.sys,
source: \\?\C:\Windows\Servicing\Packages\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816\TsUsbGD.sys, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Failed to gather all missing files for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT
= 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CSI    0000000e@2011/3/4:03:38:06.785 CSI Transaction @0x3316be0 destroyed
2011-03-03 21:38:06, Error                 CBS    Failed to pre- stage package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Perf: Stage chain complete.
2011-03-03 21:38:06, Info                  CBS    Failed to stage execution chain. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Error                 CBS    Failed to process Multi-phase execution. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status:
0x800f081f, failure source: Stage, start state: Staged, target state: Staged, client id: SP Coordinater Engine
2011-03-03 21:38:06, Info                  CBS    Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-03-03 21:38:07, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2011-03-03 21:38:07, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without
it...
I have also attempted an SP1 installation using Windows Update, but it fails, too.
I have installed the
System Update Readiness Tool with no change in the outcome.
I have run sfc /scannow with no effect.
Can anyone assist?
Thanks...Russ

Hi,
I have exact the same problem.
After installing SP1 Windows 2008 R2 through windows update i can not start server manger..
System Update Readiness Tool
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 11.0
2011-03-15 12:29
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
(f)    CBS Watchlist Package Missing    0x80070002    Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Component Watchlist
(f)    CBS Watchlist Component Missing    0x80070002    amd64_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_b2c7ff753148df7e    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    amd64_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_b2c7ff753148df7e    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    x86_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_56a963f178eb6e48    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    x86_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_56a963f178eb6e48    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 387
Found 5 errors
CBS Watchlist Package Missing Total count: 1
CBS Watchlist Component Missing Total count: 4

Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

Hi
I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
2. Oracle 11G Database
3. RCU Installation
4. WebLogic 10.3.5.0 Generic Version
5. Weblogic patch
6. OBIEE 11G 64 bit version (11.1.1.5). Software only
7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
Thanks

Hi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM

SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E

Dear Sir.,
Am installing sap ECC 6.0 on windows 2008 clustering with db2.
I got one error in the phase of Configure the database for mscs. The error is DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
DB2_INSTANCE=DB2PRD
DB2_LOGON_USERNAME=iil\db2prd
DB2_LOGON_PASSWORD=XXXX
CLUSTER_NAME=mscs
GROUP_NAME=DB2 PRD Group
DB2_NODE=0
IP_NAME = DB2 IP PRD
IP_ADDRESS=192.168.16.27
IP_SUBNET=255.255.0.0
IP_NETWORK=public
NETNAME_NAME=DB2 NetName PRD
NETNAME_VALUE=dbgrp
NETNAME_DEPENDENCY=DB2 IP PRD
DISK_NAME=Disk M::
TARGET_DRVMAP_DISK=Disk M
Best regards.,
please help me since am already running late with this installation to run the db2mscs utility to Create resource.
Best regards.,
Manjunath G
Edited by: Manjug77 on Oct 29, 2009 2:45 PM

Hello Manjunath.
This looks like a configuration problem.
Please check if IP_NETWORK is set to the name of your network adapter and
if your IP_ADDRESS and IP_SUBNET are set to the correct values.
Note:
- IP_ADDRESS is a new IP address that is not used by any machine in the network.
- IP_NETWORK is optional
If you still get the same error debug your db2mscs.exe-call:
See the answer from Adam Wilson:
Can you run the following and check the output:
db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
I suspect you may see the following error in the debug.txt:
Create_IP_Resource fnc_errcode 5045
If you see the fnc_errcode 5045
In that case, error 5045 which is a windows error, means
ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
couldn't find the "public network" as indicated by IP_NETWORK.
Windows couldn't find the MSCS network called "public network". The
IP_NETWORK parameter must be set to an MSCS Network., so running the
Cluster Admin GUI and expanding the Cluster Configuration->Network to
view all MSCS networks that were available and if "public network" was
one of them.
However, the parameter IP_NETWORK is optional and you could be commented
out. In that case the first MSCS network detected by the system was used.
Best regards,
Hinnerk Gildhoff

Installation of BOBJ 3.1 on Windows 2008 in HA enviroment.

Similar Messages

Maybe you are looking for