Installation of  CE 7.1 on windows with Max DB

Hi All,
I have installed CE 7.1 on windows with Max DB.
After successful installtion, it is not getting started. After chekcing the log files, found that that DB connection could not be established.
I am not find the Max DB icon in the system tray. I am not sure if the Max DB is running ok.
How can we check that and how can i make it work.
Regards
Suneel

Hi.
I have tried the same and on Windows for some strange reason the MaxDB do not start automatic. You might try to go to ControlPanel -> services, select the MaxDB service and make it autostart.
Then you need to alter the profiles files and enter a line like "autostart  = 1". I do not have the exact location right now, but can find it tomorrow.
BR
Poul.

Similar Messages

  • While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

    While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

    What DVD drive are you using?

  • Installation from Windows with a'n closed Display

    Hi, i have a big problem.
    On my Macbook pro ist the display broken and i must install windows with an extern TFT. Under Mac OSX is that not a Problem, it switch to the extern display.
    The installation-procedure from Windows activate the internal display (that was at me broken).
    Is there any hints or tips, so that i can install Windows with bootcamp on an externeal display?

    I doubt this is possible, and even if it was, it would not be advisable to use an OS that was installed on one computer, then move the installation to a computer with a different processor architecture. Doing that is asking for trouble.
    If you have any further questions about Bootcamp, I suggest you post them in Apple's Bookcamp discussion forum.

  • Replacing preinstalled Windows with "normal" and clean Windows installation (T500)

    Hello,
    is there any way, how to replace preinstalled Windows with my super-clean installation of Windows? I'm really not happy with partitioning (honestly, I'm using Linux, so I want just Win partition, Boot partition, Extended partition (with root, home, swap) --- no recovery partition, no foobar partition, which just make no sense for me), given features which I don't need etc. I would rather have clean setup of Windows 7 and have computer installed my way. Also I don't like such toolbar things, and crappy ware of Lenovo already installed.
    I can backup Windows 7 activation and restore it to new clean installation - so I don't need to buy new disc... But - where can I get that clean Windows 7 Ultimate shiny disc? Do anyone know? Is it possible to download it from MS site?

    The preloaded Windows 7 will probably run faster than a retail version due to the EE optimized drivers. Just uninstall Norton, the Office 2010 Starter trial, the additional media software, and you should be good to go.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Error in Plugin Installation For MS Office 2013 on Windows 8 and 8.1

    Hello,
    We have developed an installer for MS Word and MS Excel plugins. So far it has been working fine for MS Office 2003, 2007 etc. but since I have upgraded to a Windows 8.1 machine with MS Office 2013 installed, the plugin installation is giving error.
    The installation fails and an error dialog appears with Error Code Type: Error, Error:1, Owner:30a.
     The installer works well for MS Office 2010 on Windows 8/ 8.1 machine or MS Office 2010 on Windows 7 machine.

    HiDinesh,
    Is there any other error message when installation fails?
    According to this error message “Error Code Type: Error, Error:1, Owner:30a.”
    This is problem conclusion provided by IBM:
    This issue is no longer reproducible in V6R2012x.
    Installation checks have been modified to throw an error only when none of the Office applications
    (Word, Excel, PowerPoint and Outlook) are installed. This error will not occur if one or more of the Office products are installed.
    For more detail information:
    http://www-01.ibm.com/support/docview.wss?uid=swg1HE09464
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    If there is anything I can do for you regarding this issue, feel free to post back.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • The installation of SAP Front-End components failed with 95 errors.

    I tried to install SAP GUI 7.20 on Windows Vista X64.  And I got this error message:
    The installation of SAP Front-End components failed with 95 errors.
    This 7.20 version used to run on this operating system fine. I reinstalled the OS, and now I got this.

    Hi,
    I suppose you reinstalled the same OS.
    Did you install the JSDK (java) afterwards. As you must be aware Java is a pre-requisite for the SAP Frontend.
    Also make sure you have set the environment variables after installing java.
    Further documentation, the SAP installation manual can be found in the u201CDOCUu201D folder of the installation software.
    Regards,
    Rohan.

  • Installer encountered an error: 0x80096002 on windows 8.1

    hello,
    I am trying to install  Windows Installer 4.5 [windows6.0-KB942288-v2-x64] on windows 8.1 which is pre-requisite for installation of "Microsoft® SQL Server® 2008 Express with Advanced Services"
    I am getting below error while installing Windows Installer 4.5
    "Installer encountered an error: 0x80096002 on windows 8.1"
    I tried to add the feature "Windows Identity Foundation 3.5" in order to resolve the issue
    But it didn't help
    PLs assist
    Thanks
    Padol

    Hi Padol,
    Since the issue regards Widows 8.1. I will help you move  the question to the related forums at
    http://social.technet.microsoft.com/Forums/en-US/home?forum=w8itprogeneral . It is appropriate and more experts will assist you.
    Thanks for your understanding and support.
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Download trial for windows with a mac

    I need to know if there are a way to download trials of CS6 for windows with a mac

    Thanks for your answer Mylenium, but always i try to download the trial the download manager always download "dmg" file!, how can i get download the windows installer?

  • Error during installation of JDeveloper 11g (which is bundled with WebLogic

    Hi,
    I just downloaded Oracle JDeveloper 11g (Build 5188). During installation I'm beeing asked what to install and then I choose a complete installation which includes:
    -JDeveloper and ADF
    -WebLogic Server
    When the installation reaches 42% I get a popup window with the following error message:
    Fatal error encountered during file installation. The installer will now cleanup and exit!
    C:\Oracle\Middleware\wlserver_10.3\server\bin\beaexec.exe
    (Access denied)
    I am beeing loged on as the Administrator.
    OS beeing used is Windows XP
    Any idea?

    hi,
    Did you find a sollution to your problem??
    I just got same error message and have no clue what to do....
    shh.

  • My tabs are seperated into groups. Once I accidentaly opened a site in a new window (not a new tab). After that, I accidentaly closed the Firefox window with all my grouped tabs. Now, I can't recover it. Are there any solutions?

    I have my tabs seperated into several groups (for example, bank tabs, music tabs, social life tabs and so on). I do this with the help of the button in the top left corner. While I was surfing the internet, I accidentaly opened a site not in a new tab (as I usually do), but in a new window. The new window was without all the grouped tabs, which I had in the previous Firefox window. And then I accidentaly closed the Firefox window with all my grouped tabs. Now I can't recover it. Are there any solutions?

    Hi,
    We have rolled out a fix for this issue.
    Please log off and log back in to your machine and the issue should be resolved automatically. In case that does not work, please manually run the msi installer posted here (may require reboot).
    For details, please refer to the KB article here: Multiple RunOnce keys created 11.0.10 and 10.1.13 Acrobat | Reader
    Please let us know if you still face any issues.
    Thanks,
    Ashu Mittal

  • Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

    Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

    That's perfect, thanks.
    error writing to file: C:\Program
    files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
    itxib. Verify that you have access to that directory
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Which Apache works on Windows with AM Agents?

    Hello,
    I'm trying to implement SSO with an Apache Webserver running on Windows 2003.
    I received an Agent 2.2 from Sun Support, and downloaded the 2.1 version from the
    Sun download area.
    I've tried with the Apache 2.0 and 2.2 versions downloaded as the .msi-installer from
    http://httpd.apache.org.
    With all possible combinations, I get the following error:
    <--------------->8----------------->8-------------------->
    httpd.exe: Syntax error on line 485 of C:/Program Files/Apache Software Foundati
    on/Apache2.2/conf/httpd.conf: Syntax error on line 1 of C:/Sun/Identity_Server/A
    gents/2.1/apache/config/apache_8082/dsame.conf: Cannot load C:/Sun/Identity_Serv
    er/Agents/2.1/apache/bin/libamapc2.dll into server: The specified module could n
    ot be found.
    <--------------->8----------------->8-------------------->
    According to some posts in this forum, the DLLs msvcp70.dll and msvcr70.dll have
    to be deployed too. But that doesn't solved the problem.
    Running the agent for IIS, all works fine. Therefore, everything beside the Apache and
    the Agent should be OK.
    Anyone successful with this topic?
    Regards,
    Juergen

    GustavoN wrote:
    ...Under Liunx It fails..how?
    >
    Thanks you!
    Gustavo
    [ Don't use PrintWriter or PrintStream|http://forums.sun.com/thread.jspa?messageID=10642137#10642137]
    outToServer.println((char)13);You should flush() the outputstream after writing, before you do a subsequent read on the socket's inputstream.
    catch(IOException e) {
    if (status == 1){
    ErrorDescription = ErrorDescription+"ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
    }else{
    ErrorDescription = "ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
    status = 1;
    finally {
    theSocket.close();
    catch(UnknownHostException e) {
    if (status == 1){
    ErrorDescription = ErrorDescription+"ERRTEL03 Error in TELNETMonitor Thread (INVALID HOST): "+e.getMessage();
    }else{
    ErrorDescription = "ERRTEL03 Error in TELNETMonitor Thread (INVALID HOST): "+e.getMessage();
    status = 1;
    catch(ConnectException e) {
    if (status == 1){
    ErrorDescription = ErrorDescription+"ERRTEL04 Error in TELNETMonitor Thread (THE HOST DOESN'T RUN A SERVER ON THE SPECIFIED PORT): "+e.getMessage();
    }else{
    ErrorDescription = "ERRTEL04 Error in TELNETMonitor Thread (THE HOST DOESN'T RUN A SERVER ON THE SPECIFIED PORT): "+e.getMessage();
    status = 1;
    catch(IOException e) {
    if (status == 1){
    ErrorDescription = ErrorDescription+"ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
    }else{
    ErrorDescription = "ERRTEL01 Error in TELNETMonitor Thread: "+e.getMessage();
    status = 1;
    C'mon, Gustavo, you can have cleaner exception handling than that!
    Edited by: ghstark on May 14, 2009 4:40 PM

  • HT1926 My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi  after 2 installs how can I install such a file do you have a path for this

    My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi  after 2 installs how can I install such a file do you have a path for this

    Hi kensb!
    I would recommend that you attempt to reinstall all of the programs and components of iTunes on your machine and reinstall everything again. It can be tricky to get everything uninstalled, so we have an article that can help you make sure you uninstall everything:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    Specifically, when it comes to uninstalling, you will want to uninstall applications in this order:
    Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer.
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended effects.
    You will then want to follow the links in those articles to download the latest package of iTunes software for your computer and install again from there. Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Windows Update installs older Canon MG4100 drivers in Windows 8/8.1

    When I turn on the MG4120 printer and the printer is already setup for wireless and I have WSD enabled, Windows 8 or 8.1 automatically installs older Canon MG4100 drivers from Windows update.  The same thing happens if I connect the USB printer before installing the Canon software from the website and the same issue also happen in wireless mode.  The version that gets installed by Windows Update is the same version listed in the catalog at http://catalog.update.microsoft.com/v7/site/Search.aspx?q=mg4100.
    Windows 8,Windows 8.1 Drivers,Windows Vista  Drivers (Printers)  8/16/2011  2.50.2.70
    Windows 7  Drivers (Printers)  3/13/2012  18.0.2.31
    Canon, can you please submit the newer printer driver to microsoft Windows Update?

    Hi KeithWeisshar,
    WSD drivers are supplied and supported by Microsoft.  The version numbers and dates are not comparable to the numbers and dates for our drivers.  While WSD will provide you with basic printing capability and some features, to get the most from your printer, I recommend using the drivers found on our website. 
    If you have any other questions, please feel free to Contact Us!
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Oracle Universal Installer doesn't start on Windows2000 prof. with P-4 processor

    Hi all,
    the problem is that when I try to install Oracle 8.1.7.0.0 EE on my computer with P-4 processor with OS WIndows2000 simply nothing happens. The installation process just starts up end exits after several seconds without any error messages.
    Earlier I succefully installed the same program on the Windows2000 with P-3 processor. Have anybody encountered already such problem?
    thanks for any help, Igor

    Thank you very much. Finally some good advice that works.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Conti ([email protected]):
    I had the same problem, here is what worked for me and why.
    The root of the problem the that older versions of the 1.1.x jdk don't function properly on a P4. See:
    http://java.sun.com/products/jdk/1.1/download-jdk-windows.html
    Notice they indicate there was a problem running Java 1.1.x on Pentium 4 machines and that JDK 1.1.8_008 has a fix for it.
    The problem is specifically with a file named SYMCJIT.DLL although this isn't clear from reading the java site. The 8i installer includes this file twice, search for it. The version provided with the Orcale installer is older then the one provided with JDK 1.1.8_008 even though if you inspect the properties of these various files they all appear to be the same.
    Download the JDK 1.1.8_008, find this file and replace the installer versions with it and all should be well!
    Joe<HR></BLOCKQUOTE>
    null

Maybe you are looking for