Installation of central or dialog instance?

Hello,
We are currently running an ABAP-System only. We want to install an AS JAVA in order to use Adobe Document Services. We only want to use Print Forms and no Interactive Forms.
My question is, if the JAVA installation has to be as a central instance or as a dialog instance? I read through all the guides I could find, but I'm not quite sure in this point. Is the dialog instance only usable if you are already using a JAVA distributed system?
What are your recommendations, is it enough to install a simple AS JAVA or would you recommend installing EP or EPC? As I said, the AS JAVA is only needed for Adobe Print Forms for now.
Thanks in advance

Hai,
Check SAP Note: 925741, point no:1.
For the scenario of print forms you can Install Adobe document services on a SAP Web AS 6.40 ABAP + J2EE system (J2EE Add-In).
Regards,
Yoganand.V

Similar Messages

  • EP Central System + Dialog Instance Installation options

    Hi Friends
    For my production EP 6.0 WAS 6.40-Java instance I am getting 3 AIX servers, say server DBserver, Appserver1 & Appserver2, we want to install the database & CI on the DBserver, the other 2 servers need to serve the role of Application servers to the DB+CI server.
    In our SAP R/3 Production systems we don't allow the users to login to the server hosting the (database+CI) & we allow them to login only to the appication servers, I want to do a similar setup for my Production portal landscape & require that the portal users are load-balanced using the SAP Web Dispatcher to the 2 application servers.
    I have 2 questions on which installation options to choose to achieve the above objective.
    1.  Can somebody check & confirm if the below mentioned Installation sequence is correct for Installing the WAS on the 3 servers.
    a) Using Installation option "Java System ->Oracle->Central System->Custom Installation-Java system" for the DBserver.
    b) Installation option "Java System ->Oracle->Central System->Dialog Instance Installation" for Appserver1 & Appserver2.
    2. Can somebody advice how do I need to install the portal on the 3 servers so that the above objective of load-balancing the users to the 2 App servers is met.
    a) Do I need to install portal only on the DB+CI server & then the portal platform will be setup on the 2 App servers as well or
    b) Can I install the portal separately on the 2 portal App servers.
    Thanks & Rgds,
    Abhishek

    Hi Friends
    Any replies will be appreciated & also rewarded with points.
    Thanks & Rgds,
    Abhishek

  • No CENTRAL nor DIALOG instance known for system SID

    Hi,
    We are in the process of setting up our Solution Manager 7.1. Currently we are in the step 'Managed System Configuration'.
    We are stuck on the step 7 - "Create Users". There are 4 users to be created which are already there in the systems(Created Manually).
    The users are
    SAPSUPPORT and SMDAGENT_XXX for ABAP and Java both.
    In the ABAP view it gives the error as "No CENTRAL nor DIALOG instance known for system SID".
    In the Java view it gives the error as "User Status Cannot be checked".
    We are on the below Support Pack status:
    SAP_ABA 702 0008 SAPKA70208
    SAP_BASIS 702 0008 SAPKB70208
    PI_BASIS 702 0008 SAPK-70208INPIBASIS
    ST-PI 2008_1_700 0004 SAPKITLRD4
    SAP_BS_FND 702 0006 SAPK-70206INSAPBSFND
    SAP_BW 702 0008 SAPKW70208
    SAP_AP 700 0024 SAPKNA7024
    WEBCUIF 701 0005 SAPK-70105INWEBCUIF
    BBPCRM 701 0005 SAPKU70105
    BI_CONT 706 0003 SAPK-70603INBICONT
    CPRXRPM 500_702 0006 SAPK-50006INCPRXRPM
    ST 710 0003 SAPKITL703
    ST-BCO 710 0001 SAPK-71001INSTBCO
    SOCO 101 0000 -
    ST-A/PI 01N_700SOL 0000 -
    ST-ICO 150_700 0030 SAPK-1507UINSTPL
    ST-SER 701_2010_1 0008 SAPKITLOS8
    Please suggest a solution to this.
    Thanks & Regards,
    Ajitabh

    Hello Ajitabh,
    I'm sure that you will see this error if you expand the error entry:
    SPML service failed to process searchRequest
    1. If you followed the advices from note 1616058, disabling SPML:
    When the SPML is desactivated, the status of users can't be checked.
    We are working to provide a note to solve this issue. Note number is 1647267, it is not release yet, but the solution is:
    "Enable to flag the user creation  to 'manually performed' in solman_setup".
    2. If you didn't disable SPML:
    Please refer to the steps in this SAP Note : 1647157 which will help you address the issue.
    Please let us know the outcome, thanks.
    Best regards,
    Guilherme

  • Installation of Application Server (Dialog Instance) R/3 4.6C

    I am trying to install a Dialog instance for our test server and I am getting the following error
    Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
    checking host name lookup for 'CFSAP4'
    Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
    offical host name for 'CFSAP4' is 'CFSAP4.DAKAmericas.com'.
    Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
    host 'CFSAP4' has ip address '10.16.6.123'
    Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
    offical host name for '10.16.6.123' is 'cfsap4'.
    Error: DIALOGINSTANCE_NT_MSS SubstituteVariables 2 326
    The official name of hostname cfsap4 is CFSAP4. Please check your DNS configuration and insert an entry in etc\hosts.
    Error: DIALOGINSTANCE_NT_MSS ColdKeyCheck 2 326
    Phase failed.
    Error: Main {} 2 326
    Installation aborted.
    I have checked the DNS setting and found some things, which I have deleted, but still this error, do I need to reboot or is their a some time which I have to wait for the DNS setting to take effect.
    Thanks
    Jagraj Dhillon
    Message was edited by: Jagraj Dhillon

    SAP Notes 83200 and 23538,
    SAP treads hostnames case sensitive.
    using \etc\hosts should be the last method to fix this because it will bypass DNS.
    Example: Central instance corrects it's hostname using \etc\hosts - app-server uses DNS. this situation may result in different hostnames.
    regards
    Peter

  • Error installing Dialog Instance ABAP+JAVA

    Hi,
    We're having a little issue with installation of a ERP dialog instance. The problem is, when the initial
    installation was made, it was a system copy but not in the traditional way, the partner performed a copy
    in OS level (cp -rp .... , etc). Once it was finished, renaming of certain this happended.
    As we can see, DEV was the initial installation (normal way) but QAS and PRD were copies of DEV ( oracle
    schema in PRD is SAPDEV too) this apparently doesn't cause a problem. But now the installer of a dialog
    instance stops with this error:
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
            at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>
    (DBConnectionPool.java:115)
            at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>
    (PersistenceHandler.java:38)
            at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>
    (ConfigurationCache.java:149)
            at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init
    (ConfigurationManagerBootstrapImpl.java:236)
            at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>
    (ConfigurationManagerBootstrapImpl.java:49)
            at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:47)
            at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:83)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: The encryption key
    (usually in the key file) is not the key that is required to decrypt the data in the secure store file or
    the system name (SID) is wrong..
            at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
            at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
            at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
            at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
            at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>
    (DBConnectionPool.java:112)
            ... 11 more
    Caused by: com.sap.security.core.server.secstorefs.WrongKeyException: The encryption key (usually in the
    key file) is not the key that is required to decrypt the data in the secure store file or the system name
    (SID) is wrong.
            at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:2017)
            at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
            at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
            at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
            ... 13 more
    Caused by: com.sap.security.core.server.secstorefs.InvalidStateException: Internal error during the
    decryption process.
            at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:850)
            at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1985)
            ... 16 more
    Caused by: javax.crypto.BadPaddingException: Invalid PKCS#5 padding length: 176
            at iaik.security.cipher.s.b(Unknown Source)
            at iaik.security.cipher.w.a(Unknown Source)
            at iaik.security.cipher.w.engineDoFinal(Unknown Source)
            at javax.crypto.Cipher.doFinal(DashoA12275)
            at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:825)
            ... 17 more
    Error while connecting to DB.
    The error occurs when the installer tries to connect to oracle via jdbc, but the files
    SecStore.properties and SecStore.key are from DEV, and they were created with the values of DEV, so when
    the installer tries with PRD as central instance name, it doesn't work, how can we recreate this files or
    reconfigure the j2ee engine so the installer can connect and finish installation ?
    Thanks in advance

    Exactly, the problem is when the installer tries to execute the following:
    /usr/j2se/bin/java -classpath /tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/install/shar
    edlib/launcher.jar -Xmx256m -d64 -d64 com.sap.engine.offline.OfflineToolStart co
    m.sap.engine.configtool.batch.BatchConfig /usr/sap/PRD/SYS/global/security/lib/t
    ools/iaik_jce.jar:/usr/sap/PRD/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/
    sap/PRD/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/PRD/SYS/global/sec
    urity/lib/tools/iaik_ssl.jar:/usr/sap/PRD/SYS/global/security/lib/tools/w3c_http
    .jar:/tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/install/lib:/tmp/sapinst_instdir/ERP/
    LM/AS/ORA/DI/install/sharedlib:/oracle/client/10x_64/instantclient/ojdbc14.jar /
    tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/BatchConfig.xml
    The file /tmp/sapinst_instdir/ERP/LM/AS/ORA/DI/BatchConfig.xml has this:
    <?xml version='1.0' encoding='UTF-8'?>
    <!DOCTYPE config [
    <!ELEMENT config (dbproperties, task*)>
       <!ELEMENT dbproperties (property*)>
       <!ELEMENT task (property*)>
         <!ATTLIST task name CDATA #REQUIRED>
       <!ELEMENT property (#PCDATA)>
         <!ATTLIST property key CDATA #REQUIRED>
         <!ATTLIST property value CDATA #REQUIRED>
    ]>
    <config>
      <dbproperties>
        <property key="rdbms.maximum_connections" value="5"/>
        <property key="system.name" value="PRD"/>
        <property key="secstorefs.keyfile" value="/sapmnt/PRD/global/security/data/S
    ecStore.key"/>
        <property key="secstorefs.secfile" value="/sapmnt/PRD/global/security/data/S
    ecStore.properties"/>
        <property key="secstorefs.lib" value="/sapmnt/PRD/global/security/lib"/>
        <property key="rdbms.driverLocation" value="/oracle/client/10x_64/instantcli
    ent/ojdbc14.jar"/>
        <property key="rdbms.connection" value="jdbc/pool/PRD"/>
        <property key="rdbms.initial_connections" value="1"/>
    As you can see the are values "system.name" with PRD. This cause an error:
    PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
            at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:115)
            at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
            at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
            at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
            at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
            at com.sap.engine.configtool.batch.BatchConfig.go(BatchConfig.java:47)
            at com.sap.engine.configtool.batch.BatchConfig.main(BatchConfig.java:83)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:324)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: The encryption key (usually in the key file) is not the key that is required to decrypt the data in the secure store file or the system name (SID) is wrong..
            at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
            at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
            at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
            at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
            at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:112)
            ... 11 more
    Caused by: com.sap.security.core.server.secstorefs.WrongKeyException: The encryption key (usually in the key file) is not the key that is required to decrypt the data in the secure store file or the system name (SID) is wrong.
            at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:2017)
            at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
            at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
            at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
            ... 13 more
    Caused by: com.sap.security.core.server.secstorefs.InvalidStateException: Internal error during the decryption process.
            at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:850)
            at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1985)
            ... 16 more
    Caused by: javax.crypto.BadPaddingException: Invalid PKCS#5 padding length: 176
            at iaik.security.cipher.s.b(Unknown Source)
            at iaik.security.cipher.w.a(Unknown Source)
            at iaik.security.cipher.w.engineDoFinal(Unknown Source)
            at javax.crypto.Cipher.doFinal(DashoA12275)
            at com.sap.security.core.server.secstorefs.Crypt.decrypt(Crypt.java:825)
            ... 17 more
    The same as configtool with PRD value.
    So can we change the system.name value to PRD and is there a posibility to change the encpytion key so it can be used with PRD value ??
    My theory is: The SecStore.key file is used to decript the SecStore.properties but the system.name value plays an important role in decryption, am I right??
    Can I regenerate the key with the system.name = PRD so the error solves??
    Regards.

  • SAP Dialog Instance Installation.

    Hi
    Installation of ABAP System ECC6.0
    I am trying to install another application server(Dialog Instance) on
    different host. My both System Central(main server) and Dialog system in
    same domain. I am installing SAP Server as a Local Installation.
    I am able to installed Dialog Instance on same Host of Central System. But
    when I was trying to installation it on different Host, I got error on
    u201CStart Dialog Instanceu201D step that is last step it cant able to start Dialog
    Instance.
    Can you please tell me the Prerequisite for this type of setup as well as
    any other Setting related to u201Chostsu201D and u201Cservicesu201Dfile ? and also central system
    side settings.
    Following Error is occurred :
    u201CCopy Errors detected.................: 0
    Sync Errors detected.................: 0
    Warnings detected....................: 0
    INFO 2008-11-21 13:14:39
    Execute step createOsCol of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
    nd|ind|ind|ind|1|0.
    WARNING[E] 2008-11-21 13:14:40
    FSL-06002  Error 1060 (The specified service does not exist as an installed
    service.
    ) in execution of a 'OpenService' function, line (266), with parameter
    (SAPOsCol).
    INFO 2008-11-21 13:14:41
    Creating file C:\Program
    Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
    INFO 2008-11-21 13:14:41
    Output of
    i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove SAPOsCol
    is written to the logfile ntscmgr.exe.log.
    INFO 2008-11-21 13:14:41
    Execution of the command "
    i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
    remove SAPOsCol" finished with return code 0. Output:
    failure: OpenService (0x424)
    INFO 2008-11-21 13:14:41
    The 'SAPOsCol' service on the 'Local' machine was created successfully.
    INFO 2008-11-21 13:14:45
    The service 'SAPOsCol' started successfully on host 'Local'.
    INFO 2008-11-21 13:14:46
    Execute step createService of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
    nd|ind|ind|ind|1|0.
    INFO 2008-11-21 13:14:46
    Creating SAP start service of instance PT6/D02...
    INFO 2008-11-21 13:14:47
    Creating file C:\Program
    Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\sapstartsrv.exe.log.
    INFO 2008-11-21 13:14:47
    Output of D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
    i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
    I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm is written to the
    logfile sapstartsrv.exe.log.
    INFO 2008-11-21 13:14:53
    Execution of the command "D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
    i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
    I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm" finished with return
    code 0. Output:
    Service succesfully installed.
    INFO 2008-11-21 13:14:53
    Execute step setServiceSecurity of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
    nd|ind|ind|ind|1|0.
    INFO[E] 2008-11-21 13:14:58
    FSL-01027  Account user="I3976vm2\SAP_PT6_LocalAdmin" does not exist.
    INFO 2008-11-21 13:14:58
    Successfully set '(S-1-5-21-134454618-3270849815-193169279-1011, NONE, + |
    SERVICE_START | SERVICE_STOP)(S-1-5-18, NONE, +o | READ_CONTROL |
    SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
    | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
    | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
    STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL |
    SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS |
    SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
    SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
    SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE
    | WRITE_DAC | WRITE_OWNER)(S-1-5-4, NONE, + | READ_CONTROL |
    SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
    SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
    STANDARD_RIGHTS_WRITE)(S-1-5-6, NONE, + | READ_CONTROL |
    SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
    SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
    STANDARD_RIGHTS_WRITE)(S-1-5-11, NONE, + | SERVICE_USER_DEFINED_CONTROL)(S-
    1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS |
    SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
    SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
    SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
    STANDARD_RIGHTS_WRITE)(S-1-5-21-134454618-3270849815-193169279-1009, NONE, +
    | DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG |
    SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
    | SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
    | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
    STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service
    I3976vm2\SAPPT6_02' on computer 'I3976vm2'.
    INFO 2008-11-21 13:14:58
    Execute step createCCMSService of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
    nd|ind|ind|ind|1|0.
    WARNING[E] 2008-11-21 13:14:58
    FSL-06002  Error 1060 (The specified service does not exist as an installed
    service.
    ) in execution of a 'OpenService' function, line (266), with parameter
    (sapccmsr.02).
    INFO 2008-11-21 13:14:59
    Creating file C:\Program
    Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
    INFO 2008-11-21 13:14:59
    Output of
    i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove
    sapccmsr.02 is written to the logfile ntscmgr.exe.log.
    INFO 2008-11-21 13:14:59
    Execution of the command "
    i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
    remove sapccmsr.02" finished with return code 0. Output:
    failure: OpenService (0x424)
    INFO 2008-11-21 13:14:59
    Execute step setCCMSServiceSecurity of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
    nd|ind|ind|ind|1|0.
    INFO 2008-11-21 13:15:00
    Execute step registerEventsDLL of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
    nd|ind|ind|ind|1|0.
    INFO 2008-11-21 13:15:09
    Execute step setICMBndPermissions of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
    nd|ind|ind|ind|1|0.
    INFO 2008-11-21 13:15:09
    Execute step copyRFCExecSec of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
    INFO 2008-11-21 13:15:10
    Copied file '
    i3643vm/sapmnt/PT6/SYS/exe/uc/NTI386/rfcexec.sec' to
    'D:/usr/sap/PT6/D02/work'.
    INFO 2008-11-21 13:15:11
    Execute step callSetDB4PWD of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
    INFO 2008-11-21 13:15:13
    Execute step unpackJ2EEINSTALL of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
    INFO 2008-11-21 13:15:13
    Execute step runBatchconfig of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
    INFO 2008-11-21 13:15:13
    Execute step removeTempDirectory of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
    INFO 2008-11-21 13:15:14
    Execute step start of component
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
    INFO 2008-11-21 13:15:14
    Starting instance PT6/DVEBMGS00...
    INFO 2008-11-21 13:15:15
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:15
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:15
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:15
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:15
    Starting instance PT6/D02...
    INFO 2008-11-21 13:15:22
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:22
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:22
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:22
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:35
    Creating file C:\Program
    Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\stop_PT6_D02.log.
    INFO 2008-11-21 13:15:35
    Output of
    i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe name=PT6 nr=02
    SAPDIAHOST=I3976vm2 is written to the logfile stop_PT6_D02.log.
    INFO 2008-11-21 13:15:43
    Execution of the command "
    i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe
    name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code 0. Output:
    STOPSAP executed succesfully
    INFO 2008-11-21 13:15:46
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:46
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:46
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:46
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:15:48
    Creating file C:\Program
    Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\start_PT6_D02.log.
    INFO 2008-11-21 13:15:48
    Output of
    i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\startsap.exe name=PT6 nr=02
    SAPDIAHOST=I3976vm2 is written to the logfile start_PT6_D02.log.
    INFO 2008-11-21 13:16:21
    Execution of the command "
    i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386
    \startsap.exe name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code
    0. Output:
    STARTSAP continues...
    INFO 2008-11-21 13:16:21
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:16:21
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:16:21
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:16:21
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:16:22
    State of instance PT6/D02 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
    INFO 2008-11-21 13:16:50
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:16:50
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:16:50
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:16:50
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:17:23
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:17:23
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:17:23
    Connect to message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:17:23
    Disconnect from message server (i3643vm/3900) succeeded.
    INFO 2008-11-21 13:17:24
    State of instance PT6/D02 changed from ABAP: STARTING to ABAP: STARTING.
    ERROR 2008-11-21 13:17:24
    CJS-30105  Instance PT6/D02 reached state UNKNOWN after having state
    STARTING. Giving up.
    ERROR 2008-11-21 13:17:24
    FCO-00011  The step start with step key
    |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|start was
    executed with status ERROR .
    Thanks in advance.
    Regards
    Manoj

    Hi, I'm Josephine and I almost have the same scenario as this problem reported earlier but it's just that we are using SAP Netweaver 04 SR1.
    However, I'm installing additional SAP Application server to our existing one.
    Our existing main server is in MS cluster. SAPPRD1 (DB Server in node A) and SAPPRD2 (SAP App Server in node B).  System ID is PRD and the CI Instance number is 00. The hostname where the USR folder is SAPPRD (hostname in the cluster environment but this is the SAPPRD2 server in node B).
    Now I'm installing additional SAP App server into a new host (SAPPRD3 & SAPPRD4) they are all in the same domain.
    But I would like to install the 2nd and 3rd SAP App server in a local host.
    While installing there was an error "Output: Service not started" the process "Create or reregister services" during the installation stopped.
    I used the installer under the folder InstMaster\IM01_NT_I386\SAPINST\NT\I386\sapinst.exe and run the Dialog Instance under the SAP Netweaver\ABAP System\MS SQL Server\Unicode\.
    This is the part of the sapinst log where the error starts:
    PHASE 2009-01-28 08:39:29
    Preparing DBMS-specific profile parameters
    INFO 2009-01-28 08:39:30
    Adapt operation t_SAPComponent_Profiles_SHARED processed successfully.
    PHASE 2009-01-28 08:39:31
    Handle services
    INFO 2009-01-28 08:39:32
    Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_MSS_UC\DI\sapstartsrv.exe.log.
    INFO 2009-01-28 08:39:32
    Output of C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
    sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm' is written to the logfile sapstartsrv.exe.log.
    WARNING 2009-01-28 08:39:35
    Execution of the command "C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
    sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm'" finished with return code -1. Output: Service not started.
    ERROR 2009-01-28 08:39:35
    MOS-01011  'C:\usr\sap\PRD\D02\exe/sapstartsrv.exe' returned with '-1'.
    Please help me on this I can't successfully install another dialog instance to add to our existing one now.
    Thank you and hoping for your reply.
    Yours truly,
    Josephine Dejolde

  • SCM Dialog instance installation, post installation activity for livecache

    Hi All,
    We have installed SCM 7.0 Central instance with Livecache server. Now we have successfully installed additional application server (i.e. Dialog instance) for this SCM 7.0 system.
    We need to know
    After installation of SCM 7.0 Dialog instance what are the post installation activities?
    How we should integrate the livecache server with the Dialog instance which is installed on different hardware.
    We need to know how livecache server understand that the additonal application server ? Is there anything to do in LC10?
    Please reply
    Thanks

    Hi Ashley,
    Thanks for your time.
    Since i am installing app server, the SAP<SID> group will have to be online on this node. There is another group containing shared drives for components for livecache. This is also required to be online on node 2 for app server installation.
    The only cluster resource I can move back to node 1 is ORACLE<SID>. Tried doing that, but no luck.
    Any one here facing similar issue during SCM dialog instance installation in MSCS environment?
    Regards,
    Kiran

  • Dialog Instance Installation - Error while connecting to DB

    Hi All,
    We have installed a WAS 640 SP15 and successfully running a Portal EP6.0 (SP15) on the same. Now, we wish to install a dialog instance on the same for load balancing the Portal on the same Hardware/Server.
    During the DI installation in the phase "Configuring J2EE Engine", the installation fails with the error "Error while connecting to DB".
    I tried to restart the installation by replacing the JDBC and OS_LIB of the new instance with the JDBC and OS_LIB of the already running CI instance but it didnt help either.
    Any pointers in this direction will be appreciated.
    Thank you!!
    Regards,
    Abhijeet

    We have the same issue.  We have a NW04 SP19 J2EE standalone WAS and are using the SP19 SAPINST to add a second dialog instance on the same host as the central instance.
    We restarted the Oracle listener  ... to no avail
    The error in the Oracle batchconfig log is given below.
    Thanks for any insight that you can provide.
    Cheers .... Bart
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection
    (DBConnectionPool.java:360)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:125)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>
    (PersistenceHandler.java:38)

  • Dialog Instance installation - Error u0093Service Not Started u0093

    Hi All,
    We are facing some issues while installing Dialog Instance on Windows 2003 server. Please help me on this...
    Below are the Central Instance Details:
    •     SAP Component Version: SAP NetWeaver 2004s
    •     Basis Release: 700
    •     Kernel Release : 700
    •     Patch Level : 111
    •     Operating System: AIX 5.2
    •     Database : Oracle 10.2.0
    •     Central Instance host: centralhost
    •     SID : CID
    Dialog Instance Details:
    •     SAP Component Version: SAP NetWeaver 2004s
    •     Operating System: Windows 2003 Server(SP2 32 Bit)
    •     Dialog Instance host: dialoghost
    •     Instance No: 02
    In Step 8 of installation, we are getting error “Service Not Started “
    sapinst.log file content :-
    INFO 2008-02-18 03:46:44
    Creating SAP start service of instance CID/D02...
    INFO 2008-02-18 03:46:45
    Creating file C:\Program Files\sapinst_instdir\NW04S\LM\AS\ORA\DI\sapstartsrv.exe.log.
    INFO 2008-02-18 03:46:45
    Output of D:\usr\sap\CID\D02\exe\sapstartsrv.exe -r -q -p
    centralhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST -s CID -n 02 -U DIALOGHOST\SAPServiceCID -P XXXXXX -e DIALOGHOST\cidadm is written to the logfile sapstartsrv.exe.log.
    WARNING 2008-02-18 03:46:51
    Execution of the command "D:\usr\sap\CID\D02\exe\sapstartsrv.exe -r -q -p
    centralhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST -s CID -n 02 -U DIALOGHOST\SAPServiceCID -P XXXXXX -e DIALOGHOST\cidadm" finished with return code -1. Output:
    Service not started.
    ERROR 2008-02-18 03:46:52
    MOS-01011  'D:/usr/sap/CID/D02/exe/sapstartsrv.exe' returned with '-1'.
    ERROR 2008-02-18 03:46:52
    MOS-01011  'D:/usr/sap/CID/D02/exe/sapstartsrv.exe' returned with '-1'.
    ERROR 2008-02-18 03:46:52
    FCO-00011  The step createService with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|ind|ind|ind|ind|1|0|createService was executed with status ERROR .
    Service User SAPSERVICECID is aligned to administrator group.
    And when we tried to start the windows service (SAPCID_02) we got below message
    "The SAPCID_02 service on Local computer Started and then stopped. Some Services stop automatoically,if they have no work to do, for example , the performane logs and Alert service"
    Please help me on this..
    Thanks..
    Preethish

    Hi Haynes,
    From windows machine we can access the Dilaog instance profile.
    Path to executable in SAPCID_02 service is "D:\usr\sap\CID\D02\exe\sapstartsrv.exe" pf="
    centalhost\sapmnt\CID\SYS\profile\START_D02_DIALOGHOST"
    On Cental Instance( AIX machine) :-
    CI profiles are in " /sapmnt/CID/profile " path
    and DI profiles are in " /sapmnt/CID/SYS/profile " path
    centralhost:cidadm 2> cd /sapmnt/CID/profile
    centralhost:cidadm 3> ls -l
    total 64
    -rw-rr   1 CIDadm   sapsys         4958 Feb 12 20:40 CID_DVEBMGS00_CENTRALHOST
    -rw-rr   1 CIDadm   sapsys         2272 Feb 12 18:39 DEFAULT.PFL
    -rw-rr   1 CIDadm   sapsys         3826 Nov 20 02:25 START_DVEBMGS00_CENTRALHOST
    drwxr-xr-x   2 CIDadm   sapsys          256 Nov 02 02:23 oracle
    centralhost:cidadm 4> cd /sapmnt/CID/SYS/profile
    centralhost:cidadm 5> ls -l
    total 40
    -rwxrr   1 CIDadm   sapsys          303 Feb 17 19:40 CID_D02_DIALOGHOST
    -rwxrr   1 CIDadm   sapsys         2307 Feb 14 09:43 DEFAULT.PFL
    -rwxrr   1 CIDadm   sapsys         1013 Feb 17 19:40 START_D02_DIALOGHOST
    drwxr-xr-x   2 CIDadm   sapsys          256 Feb 14 14:06 oracle
    centralhost:CIDadm 6>

  • Installing 620 SAP_BASIS Dialog Instance with 6.40 Installation Master CD

    Greetings,
    At present we have a SAP R/3 Enterprise 47x200 which is dsitributed across two (windows 2003) clustered servers, one for the Central Instance and other for the Database (Oracle 9.2.0.5).
    Now and due to perfomance issues on the Central Instance we'd lke to add a Dialog Instance and here is where the doubts come up.
    Our SAP_BASIS version is 620 (System -> Status) whereas our SAP Kernel level is 640_REL (SM51).
    We have the original 6.20 Kernel CD but we don't have any valid SAP Installation Master CD (originally we made an upgrade from a 4.6B version) so I downloaded from service.sap.com/support the  51033746_13.ZIP (Installation_Master_6.20_6.40_06_08) file (I didn't found any other file better that this one).
    The first problem is that when I start sapinst.exe it ask (CD Browser Dialog) for a SAP 6.40 Kernel CD and not the 6.20 Kernel CD I already have. I have found a workaround editing LABEL.ASC file but I think it isn't a good practice.
    If I download the Kernel 6.40 from service.sap.com 51030763_1.ZIP (DVD_NW04_SR1_6.40_SAP_Kernel_Oracle) the Sapinst application works perfectly, but here comes up our doubts...
    -  Could be any problem using these 6.40 installation (Master Installation & Kernel) files for a Dialog Instance installatio in our environment? Are there other installation files which could fit better than these one? Where could I find them?
    -  When I install a Dialog Instance, does it make changes into the Database Server and Central Instance?
    - Initially we'd like to install the Dialog Instance in a test Server, try it, check that it works as we expect, and discard it in order to buy a big and powerful server where we'll definitely install the Dialog Instance. In this case, can we simply discard the test server or we have to follow a complex process for uninstall it?  (this question is somehow related to the previous one).
    Any help would be greatly appreciated. Thanks in advance.
    Javier

    Hi,
    it is OK that you have 640 kernel even if your BASIS is 620. 620 kernel is no longer supported by SAP.
    - Could be any problem using these 6.40 installation (Master Installation & Kernel) files for a Dialog Instance installatio in our environment? Are there other installation files which could fit better than these one? Where could I find them?
    You master DVD is correct
    - When I install a Dialog Instance, does it make changes into the Database Server and Central Instance?
    It does not make any changes to DB, you will see next Dialog instance in SM51 then
    - Initially we'd like to install the Dialog Instance in a test Server, try it, check that it works as we expect, and discard it in order to buy a big and powerful server where we'll definitely install the Dialog Instance. In this case, can we simply discard the test server or we have to follow a complex process for uninstall it? (this question is somehow related to the previous one).
    You can discard your dialog instance without following special procedures.

  • Installation of a Dialog Instance (DI)

    Hello,
    I am currently installing a HA environment with an SAP ERP 6.0 SR3 System on Windows with MSSQL and MSCluster.
    Everything went wll. I am using the SWPM 1.0. The system needs to be non-unicode.
    I know that the newer installation are everytime Unicode. Regarding this, I have installed my First Cluster Node, Addition Cluster Node and Central instance as System copy. There, I could select, that I want to have non-unciode. These instances are all running fine.
    The problem is now the dialog instance which I install on the second node. Everytime during the installation process, the SWPM is asking for a unicde kernel. I dont know why. Maybe someone from you could help here.
    Thanks in advance and best regards,

    Hi Steffen,
    As per SAP note
    860992 - Inst. SAP Systems Based on NW 7.0 incl. EHPs on Win:IBM i
    Unicode and Non-Unicode Support
    Every new installation of an SAP system is Unicode.
    If you install a dialog instance to an existing non-Unicode system (that has been upgraded to the current release), then the dialog instance is installed automatically as a non-Unicode instance. SAPinst determines if a non-Unicode system exists and chooses the right executables for the system type
    Hope this helps.
    Regards,
    Deepak Kori

  • Installation of Dialog Instance (DI)

    Hello gurus,
    My main goal is install an ABAP Dialog Instance (DI) on a diferent host/server than the Central Instance (CI) is installed!
    We have an ECC 6.0 ABAP + JAVA (ABAP is non-unicode) on Windows Server 2003 x64 with SQL Server 2008 and we need a dialog instance (application server) to distribute SAP workload! I know that is possible to install a dialog instance on the same physical server with database server where is already installed the central instance... but what we want is simple, is install it not in the same server but on separate machine/server. We already have the other server that will be for the dialog instance, this is a Windows Server 2003 but this is a x32 bits!! (Is there any problem with this? It´s possible install a dialog instance in x32 bits server?!)
    Other question... before installation of dialog instance I have to install a database? or a client database which will comunicate with main database on central instance / server ? If so, I don´t know but it is possible to install a database client SQL Server 2008 on Windows Server 2003 that runs X32 bits ?? I guess not... only SQL versions 2000 / 2005 isn´t it?
    So, when I read the installation guide of SAP ERP 6.0 SR3 I only find there a short reference to Dialog Instance Installation and that is in fact a very little reference to this process! For instance, in this guide there is a reference to a dialog instance installation such a MSCS landscape...:
    You have to install at least one dialog instance for MSCS. You have the following options to install the dialog instance:
    ... but we don´t want install it in MSCS (cluester) because we don´t have a cluster configuration between this two windows servers and besides that we don´t want to have it!!
    We only want install a Dialog Instance in an existing Central Instance between two windows servers in same network!
    Can you help me to clarify this questions...?
    Thanks in advance,
    Best regards,
    João Dimas - Portugal

    Many thanks Matt Kangas,
    Now I can understand with more clarity some things...!!
    What I have to do is run the master installation DVD in future server that it will have the dialog instance... as I said that is a X32 server and so I have to run the master installation for X32 (ERP 6.0 SR3), isn´t it?
    Other thing Matt... when you warn me for the distribution kernel executables... what do you meant? I've never seen a system with both instances (CI and DI) installed, but this two will share the kernel files?
    Regarding database client... I only have install the SQL Server software on dialog instance server/machine!! But I think I will find a problem... this is a X32 machine so I think (correct me if I´m wrong) that is impossible to install SQL Server 2008 in X32 machines, it only supports X64 bits, if so it´s possible with other SQL version, like 2005 (SP3)? As I said, the database in CI machine/server is installed on version SQL Server 2008, so there is some problem in having a diferent client database version installed on DI server/machine (X32)?
    Best regards,
    João Dimas - Portugal

  • Problems in Dialog instance installation for ECC6.0(ABAP+JAVA)

    Does anyone can help me what should be a procedure of installing Dialog instance for ECC 6.0 with both ABAP + Java Stacks.
    When installing app server do we also choose ABAP and Java or just ABAP. Installation manual does not cover this and when we run the sapinst we have following problem:
    <u>The following are the activities that I have done as pre-reqs on the standby on the server that is to host dialog instance</u>
    I have mounted the following file systems on ddrsap02. Created the local filesystem /usr/sap/DSP/D00 and NFS mounted the others…
    /dev/appsaph      5505024   5503856    1%        5     1% /usr/sap/DSP/D00 <b>(is this required or SAPINST should create it itself)</b>
    ddrsap00:/stage   419430400 149761708   65%    90835     1% /stage
    dprsap01:/sapmnt/DSP     4718592   2888416   39%    12790     2% /sapmnt/DSP
    ddrsap12:/usr/sap/trans     2752512   1084932   61%     5107     3% /usr/sap/trans
    Then when I run the sapinst from ddrsap02 to install the DI I get the following error
    ddrsap02[/tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI]#vi sapinst_dev.log
    "sapinst_dev.log" 20516 lines, 641048 characters
    TRACE
    Running with toplevel file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/toplevel.xml
    Running with dialog file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/dialog.xml
    Running with keydb file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/keydb.xml
    INFO       2007-01-31 09:38:52
    Working directory changed to /tmp/sapinst_exe.397528.1170221882.
    Opened iaejs701.o
    INFO       2007-01-31 09:38:52
    Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
    INFO       2007-01-31 09:38:52
    Working directory changed to /tmp/sapinst_exe.397528.1170221882.
    Opened iacdlib701.o
    INFO       2007-01-31 09:38:52
    Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
    INFO       2007-01-31 09:38:52
    Working directory changed to /tmp/sapinst_exe.397528.1170221882.
    Opened iaccdlib.o
    INFO       2007-01-31 09:38:52
    Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
    INFO       2007-01-31 09:38:52
    Working directory changed to /tmp/sapinst_exe.397528.1170221882.
    Opened iapasswdman701.o
    INFO       2007-01-31 09:38:52
    Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
    This is SAPinst, version 701, make variant 700_REL, build 817256
    compiled on Mar 14 2006, 23:39:26
    TRACE      [syxxsyshlp.cpp:175]
               syslib::logSystemState()
    Process environment
    ===================
    Environment Variables
    =====================
      _ = /tmp/sapinst_exe.397528.1170221882/sapinstexe
      SAPINST_EXE_DIR = /tmp/sapinst_exe.397528.1170221882
      LANG = en_US
      LOGIN = root
      PATH = /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
      SAPINST_EXEDIR_CD = /stage/51031797/IM_AIX_PPC64/.
      LC__FASTMSG = true
      WINDOWID = 8388621
    "sapinst_dev.log" 20516 lines, 641048 characters
               EJS_Installer::writeTraceToLogBook()
    2007-01-31 09:42:48.898 NWDB.getDBHost() done: undefined
    <i><b>ERROR      2007-01-31 09:42:48 [iaxxinscbk.cpp:271]
               abortInstallation
    CJS-00030  Assertion failed: in getSidFromProfiles: Variable dbHost should be defined</b></i>
    TRACE      [iaxxejsbas.hpp:388]
               handleException<ESAPinstException>()
    Converting exception into JS Exception Exception.
    ERROR      2007-01-31 09:42:48
               CJSlibModule::writeError_impl()
    MUT-03025  Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
    TRACE      [iaxxejsbas.hpp:460]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2007-01-31 09:42:48
    FCO-00011  The step assertDBInfo with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|assertDBInfo was executed with status ERROR .
    <html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 1 > SAP Systems > Oracle > High-Availability System > Base
    d on AS ABAP and AS Java > Dialog Instance</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button
    to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/ERP/SYST
    EM/ORA/HA/ABAPJAVA/DI</b>.</p></body></html>
    TRACE      [iaxxgenimp.cpp:1093]
               showDialog()
    waiting for an answer from gui
    Am I missing some pre-reqs or variable definitions?
    I was going through the documentation and it says that  /sapmnt/DSP/exe should be a local filesystem for a DI on a separate server. Will this create a problem ?
    Also they talk about starting sapinst with the variable SAPINST_USE_HOSTNAME set to ddrsap02. I have tried this also
    We are also not 100% sure about the settings for parameters:
    rdisp/mssserv
    rdisp/mssserv_internal
    Accorss Devault Instance and Services Instance profile.
    When we define it as per installation GUIDE (Abap+Java page 64) we get the popup message in SAPINST:
    <b><html>Profile parameter <em>rdisp/msserv_internal</em> is not set for instance DVEBMGS01/DSP on host dprsap01.<p>You have to set the parameter in the default profile and restart the instance.<p>For further information refer to SAP Note 821875.</html></b>
    Other errors follow shortly.
    Any help would be appreciated

    Hi ,
    are you able to resolve this error :Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.
    You have to set the parameter in the default profile and restart the instance.
    For further information refer to SAP Note 821875.</html>
    ? if yes , pls let me know , I am stuck with same issue while installing dialog instance .
    Thanks
    Hamendra

  • Error in installation of Central Instance in Windows Cluster with Oracle

    Hi!
    If I try to continue with the installation of Central Instance of Cluster I get the following error:
    The java load in database <sid>/<server> has already been configured. 
    Solution: remove the schema and load it with a new load before you run this installation
    Can some one tell me how to proceed?
    Thank you very much!
    Regards
    Thom

    Thom,
         Did you figure this one out?
    Thanks
    S.

  • Automatic shutdown of SAP Instance after installation of Dialog Instance

    Hi all,
    We've upgraded our system from SAP4.6C to ECC6.0 running on Win2003 64 bits Oracle 10g.
    After upgrade, we installed Dialog instance (this dialog instance is running outside MS cluster) and it is running on Microsoft cluster.  When we try to start up SAP dialog instance, the system is started but it automatically shuts down again.
    Below are the trace for DEV_DISP
    =============================
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      03
    sid        P02
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    75
    intno      20050900
    make:      multithreaded, ASCII, 64 bit, optimized
    pid        3216
    Wed Nov 22 12:32:40 2006
    kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (03 3216) [dpxxdisp.c   1237]
         shared lib "dw_xml.dll" version 75 successfully loaded
         shared lib "dw_xtc.dll" version 75 successfully loaded
         shared lib "dw_stl.dll" version 75 successfully loaded
         shared lib "dw_gui.dll" version 75 successfully loaded
         shared lib "dw_mdm.dll" version 75 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Wed Nov 22 12:32:51 2006
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0091.qqq.nxst) took 11 seconds
    Wed Nov 22 12:33:08 2006
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5273]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >AP2_P02_03                              <
    DpShMCreate: sizeof(wp_adm)          5376     (896)
    DpShMCreate: sizeof(tm_adm)          4663200     (23200)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
    DpShMCreate: sizeof(comm_adm)          552064     (1088)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1496)
    DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000007DA0050, size: 5314128)
    DpShMCreate: allocated sys_adm at 0000000007DA0050
    DpShMCreate: allocated wp_adm at 0000000007DA1AB0
    DpShMCreate: allocated tm_adm_list at 0000000007DA2FB0
    DpShMCreate: allocated tm_adm at 0000000007DA3010
    DpShMCreate: allocated wp_ca_adm at 00000000082157B0
    DpShMCreate: allocated appc_ca_adm at 0000000008219E00
    DpShMCreate: allocated comm_adm at 000000000821B570
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 00000000082A21F0
    DpShMCreate: allocated gw_adm at 00000000082A2270
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 00000000082A22A0
    DpShMCreate: allocated wall_adm at 00000000082A22B0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    rdisp/http_min_wait_dia_wp : 1 -> 1
    Wed Nov 22 12:33:09 2006
    ***LOG Q0K=> DpMsAttach, mscon ( SAPGRPP02) [dpxxdisp.c   11586]
    DpStartStopMsg: send start message (myname is >AP2_P02_03                              <)
    DpStartStopMsg: start msg sent to message server o.k.
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    Release check o.K.
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    Wed Nov 22 12:33:49 2006
    ERROR => W0 (pid 1100) died [dpxxdisp.c   14241]
    ERROR => W1 (pid 1112) died [dpxxdisp.c   14241]
    ERROR => W2 (pid 1856) died [dpxxdisp.c   14241]
    ERROR => W3 (pid 576) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0x99 --> 0x98
    ERROR => W4 (pid 1368) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0x98 --> 0x90
    ERROR => W5 (pid 1108) died [dpxxdisp.c   14241]
    my types changed after wp death/restart 0x90 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:33:59 2006
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Nov 22 04:33:59 2006
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     1100 Ended         no      1   0             0                                                             
    1 DIA     1112 Ended         no      1   0             0                                                             
    2 DIA     1856 Ended         no      1   0             0                                                             
    3 DIA      576 Ended         no      1   0             0                                                             
    4 BTC     1368 Ended         no      1   0             0                                                             
    5 SPO     1108 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Wed Nov 22 04:33:59 2006
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          11
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Wed Nov 22 04:33:59 2006
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Wed Nov 22 04:33:59 2006
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:04 2006
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >AP2_P02_03                              < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (1096) (SOFT_KILL)
    Stop icman
    killing process (748) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:1096  HANDLE:536)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:05 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1096  HANDLE:536)
    wait for end of icman
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:06 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:07 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:08 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:09 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:10 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:11 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:12 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:13 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:14 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:15 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:748  HANDLE:544)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=569
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Nov 22 12:34:16 2006
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:748  HANDLE:544)
    DpStartStopMsg: send stop message (myname is >AP2_P02_03                              <)
    NiIMyHostName: hostname = 'AP2'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to MSG_SERVER, type 1
    DpStartStopMsg: stop msg sent to message server o.k.
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Wed Nov 22 12:34:17 2006
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11899]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 548 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 548 (pos=2)
    SiSelNRemove: removed sock 548
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/6
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 548
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 3216) [dpxxdisp.c   10259]
    Good Bye .....
    Below is the trace for DEV_W0
    ==========================
    M patchno    75
    M intno      20050900
    M make:      multithreaded, ASCII, 64 bit, optimized
    M pid        1100
    M
    M  kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1100) [dpxxdisp.c   1299]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          5376     (896)
    M  DpShMCreate: sizeof(tm_adm)          4663200     (23200)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
    M  DpShMCreate: sizeof(comm_adm)          552064     (1088)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1496)
    M  DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000DDA0050, size: 5314128)
    M  DpShMCreate: allocated sys_adm at 000000000DDA0050
    M  DpShMCreate: allocated wp_adm at 000000000DDA1AB0
    M  DpShMCreate: allocated tm_adm_list at 000000000DDA2FB0
    M  DpShMCreate: allocated tm_adm at 000000000DDA3010
    M  DpShMCreate: allocated wp_ca_adm at 000000000E2157B0
    M  DpShMCreate: allocated appc_ca_adm at 000000000E219E00
    M  DpShMCreate: allocated comm_adm at 000000000E21B570
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000000E2A21F0
    M  DpShMCreate: allocated gw_adm at 000000000E2A2270
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000000E2A22A0
    M  DpShMCreate: allocated wall_adm at 000000000E2A22B0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host AP2
    M 
    M Wed Nov 22 12:33:10 2006
    M  calling db_connect ...
    C  Prepending E:\usr\sap\P02\D03\exe to Path.
    M  call semaphore clean-up function ...
    M  ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c   432]
    M  -
    C-STACK -
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Application exception occurred:
    Exception : c06d007e (Unknown exception)
    App       : disp+work.EXE (pid=1100)
    When      : 11/22/2006 12:33:14.515
    Threads   : 2
    Computer Name       : AP2
    User Name           : SAPServiceP02
    Number of Processors: 4
    Processor Type: EM64T Family 6 Model 15 Stepping 6
    Windows Version     : 5.2 Current Build: 3790
    State Dump for Thread Id 440
    --> (FAULT) Stack Back Trace <--
    FramePtr         ReturnAd         Param#1          Function Name
    000000000678f720 00000000078488ca 0000000000000003 kernel32!PulseEvent
    000000000678f7f0 0000000007847fe6 0000000007926000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
    000000000678f860 00000000078136cd 000000000678f8b0 dboraslib!_tailMerge_OCI_dll
    000000000678f8c0 000000000782f3d8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2766)]
    000000000678fa90 0000000001182107 000000000678fd80 dboraslib!DbSlConnect [dbsloci.c (1835)]
    000000000678fce0 000000000118251e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
    000000000678fd50 00000000011856de 00000000ffffffff disp+work!supply_con [dbcon.c (3830)]
    000000000678fd90 000000000117826c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
    000000000678fdf0 00000000004ca16a 000000000755476c disp+work!db_connect [dblink.c (422)]
    000000000678fe80 00000000004cf609 0000000006d6bdfd disp+work!ThInit [thxxhead.c (1404)]
    000000000678feb0 000000000042c9e6 ffffffff00000002 disp+work!ThStart [thxxhead.c (1114)]
    000000000678fee0 0000000000401097 ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1119)]
    000000000678ff10 00000000018919c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (82)]
    000000000678ff70 0000000078d5965c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
    000000000678ffa0 0000000000000000 0000000001891850 kernel32!BaseProcessStart
    State Dump for Thread Id c70
    --> Stack Back Trace <--
    FramePtr         ReturnAd         Param#1          Function Name
    000000000bd9fe40 0000000078d5f611 0000000006d31460 ntdll!NtFsControlFile
    000000000bd9feb0 000000000178a99f 0000000000000000 kernel32!ConnectNamedPipe
    000000000bd9ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (595)]
    000000000bd9ff70 0000000078d6b66a 0000000078d6b630 msvcrt!endthreadex
    000000000bd9ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
    M  -
    M 
    M Wed Nov 22 12:33:15 2006
    M  call clean-up function ...
    M  in_ThErrHandle: 1
    M  ThSigHandler: signal (step 1, th_errno 11, action 4)
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server AP2_P02_03 on host AP2 (wp 0)
    M  *  ERROR       ThSigHandler: signal
    M  *
    M  *  TIME        Wed Nov 22 12:33:15 2006
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          11
    M  *  MODULE      thxxhead.c
    M  *  LINE        10354
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 1100) [dpnttool.c   327]
    M  return from clean-up function ...
    Does anybody has a solution for this problem?
    Thank you.

    Hi all again,
    I had the same problem and found a solution for it.
    I made two steps to start the dialog instance successful. First I modified the NLS_LANG setting in the registry and enviroment (only if necessary). Second, I fetched the last Oracle Instant Client <b>OCL10264.sar</b> from SAP Net and extract the file to <b>E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64</b> (This directory was created through the Installer. The Kernel lies under <b>E:\usr\sap\PDV\D20\exe</b>)
    Now I changed the variable <b>DIR_CLIENT_ORAHOME = $(DIR_EXECUTABLE)</b> to
    <b>DIR_CLIENT_ORAHOME = E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64</b> in the Instance Profile of the new Dialog Instance. So the Kernel knows that he has to use the Oracle Instance Client and the profilevariable says where he found it.
    After these modifications the Dialog Instance starts with success.
    With kind regards
    Thomas Espenhain

Maybe you are looking for

  • How taglets should emit warnings/errors?

    I've scoured the forums and google, and it's still not clear to me how a custom taglet written for the standard doclet should signal warnings. I see the methods error() and warning() on com.sun.tools.doclets.internal.toolkit.util.MessageRetriever, ac

  • Can Developer 6.0 work with Oracle Personal

    I need to config Developer 6.0 on a single computer. So , I installed Oracle Personal 8.03 which works OK. But Developer's intaller refused to share Oracle Home directory prompting for a new one. I haven't found any hints in OP documentation at is it

  • Global Access

    I'm trying to create a web-based app that can interact with Exchange server globally. Meaning, I need it to have the ability to view, change, delete, and create all e-mails, calendars, appointments, tasks, notes, etc... across the domain. I am using

  • Flash Player Has Stopped Working!

    All of a sudden, flash player has stopped working on my computer. I have a 64-bit PC, running Windows 7. Flash was running perfectly one day; the next it was not. Hasn't worked since. I've tried downloading the latest version and even installing an o

  • EBS Login problem

    hi, EBS 11.5.10.2 Database 10.2.0 OS - RHEL 4.6 This is multi-node installation. My devt instance having one issue, very recently there is a problem with login If am trying with http:/hostname:port/oa_servlets/AppsLogin Getting error like Forbidden Y