Installation of certificates for WPA2-Enterprise?

Can someone please tell me where I can find the instructions on how to install certificates required for WPA2-Enterprise WLAN support?
Thanks.
--Philip

Hi,
I dont know what yo want but first you must install library for ASMlib
there is link to libraries
http://www.oracle.com/technology/software/tech/linux/asmlib/rhel5.html
Regards,
Tom
http://oracledba.cz

Similar Messages

Config iPhone 4s for wpa2-enterprise

How to configure an iPhone 4s for wpa2-enterprise

I've recently upgraded my iPhone 4 to ios 5.0.1 and it exhibits exactly the same problem at the Office where we use WPA2-Enterprise which basically means the Cisco Jabber app is useless when moving around the complex and in and out of sleep mode.
What's odd is this wasn't a problem on ios 4.3.3

IPhone 3GS (au) support for WPA2 Enterprise

Can someone provide me with an official page outlining whether the iPhone 3GS from Australia supports WPA2 Enterprise wifi security?
Also, whether it depends on the version of iOS as well.
Thanks.

Enterprise networking is now supported I believe.
It's not something I know much about, but the following article(s) may help you.
Installing a Profile
Configuring the Apple TV

WPA2 Enterprise with netctl

Hi,
I'm trying to connect to my university wifi which I believe is WPA2 Enterprise protected. I read the wiki about using the Eduroam netctl profile example for WPA2 Enterprise networks but it doesn't seem to work for me. This is what I have:
Connection='wireless'
Interface=wlp4s0b1
Security='wpa-configsection'
Description="nyu wpa2 network"
IP='dhcp'
TimeoutWPA=30
WPAConfigSection=(
'ssid="nyu"'
'key_mgmt=WPA-EAP'
'eap=PEAP'
'proto=WPA2'
'phase2="auth=PAP"' #maybe MSCHAPv2
'auth_alg=OPEN' #maybe
'anonymous_identity="anonymous"' # ex: tu-dresden.de
'identity="myusername"' # ex: [email protected]
'password="mypassword"'
'ca_cert="/usr/share/ca-certificates/trust-source/mozilla.trust.crt"'
Can someone point me to related info or correct my profile? Thanks.

Does your university have a site with some information/guidance for using eduroam?
Have you tried other example profiles from here, such as this one and this one? The wiki refers to this AUR package, which seems to be where you got the profile you've tried. Perhaps try the other example profiles.

WAP4410N WPA2-Enterprise - reconnect failed

We have a WAP4410N wireless ap configured for WPA2-Enterprise. Initially everything works. Issue the user the proper certificate and they sign on correctly but once they disconnect and try to reconnect later it get stuck on "Validating Identity". The request never get to RADIUS server (no success/failure log entry, no radius traffic). Once I reboot the access point everyone can connect again but as soon as they disconnect the problem happen again.
We testing other security settings (WPA-ENT, RADIUS(!), WPA2-Personal etc) and no problems. With older firmware have the same issue.
Operating system: XP SP3, RADIUS server: IAS. Firmware: 2.0.1.0
Anyone have any ideas?
thx
rokai

I tried everything without result. Nobody have same problem? The hardware version is WAP4410N-E V01. Is it possible, that v02 units resolve this issue?
Thanks in advance.

Creating a Configurator profile for ATV on WPA2 Enterprise?

Alright, so I have a couple of Apple TVs (latest version) which I want to get up and running on our wireless network here at work. We have a WPA/WPA2 Enterprise network. Our access point is simply an Airport Extreme and the RADIUS server is running on OS X Server 10.6.
I understand that I have to load the Apple TV with a profile to get it to connect to the wireless network but I can't for the life of me figure out what the correct settings are for my network. I'd ask our IT department but the problem is that I am the IT department.
When I try to connect using the profiles I've created I get the error "There was a problem connecting to the network. Check your settings and try again. (-369033215).
The first issue (I believe) is that I might not be choosing the right EAP types. In configurator I can choose TLS. TTLS, LEAP, PEAP, EAP-FAST, EAP-SIM, or EAP-AKA. I have no idea which one I should be choosing or how to figure out which types my network supports. Also some of them want me to enter an outer identity which again, I have no idea what to put there.
The second issue may be the trusted certificates - I may not have the correct one(s). When I check the RADIUS server settings, it shows that I'm using a self-signed certificate that I generated quite a while ago (we don't have any actual certs, just self-signed ones - small office, not my area of expertise so I didn't want to waste company money without knowing what I was doing). So, what I did was I opened up Keychain Access, found that certificate, exported it, and imported it into Configurator. I imported it into Trusted Certificates but I didn't put anything in for Trusted Server Certificate Names - should I put anything in there?
Any help is appreciated.

Ok that part I put above would go in your SQL, not in the report properties - you also want to replace p.product_image with whatever your BLOB column is, and p.product_id with your employee_id column.
The apex_util.get_blob_file_src basically does the same thing that you were doing but should be a little simpler to manage.
http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/apex_util.htm#CHDICGDA
So:
1) Edit your sql and try using this function instead of just calling the BLOB column.
2) Edit the column properties and put #PHOTO# as the link, and #EMPLOYEE_ID# (or whatever your primary key is called) as the Value.
3) If that long string is still in the number/character format field, clear it out.
4) If that still doesn't work, install the demo application that comes with Apex and look at Page 3. That is all I did.

Can we still use PEAP-MSCHAPV2 for authenticating to a WPA2-Enterprise network?

L.S,
For authenticating to a BYOD wireless network a lot of companies use WPA2-Enterprise connected to a Microsoft IAS/NPS server to authenticate against Active Directory. There seems to be a way to intercept this wireless traffic using a roque accesspoint using the same (company) SSID-name and tools like freeradius-WPE and cloudcracker.
If the BYOD client doesn't check the certificate provided by the fake radius server, the MSCHAPv2-negotiation can be discovered and the hacker will get the username AND hashed password which can be lookup'd by rainbow tables sites like cloudcracker.
Is there still a safe way to deploy AD-authentication to BYOD clients?
Kind Regards,
Arjen

I have tested the WPA2-enterprise/PEAP-MSCHAPv2 exploit this week placing a laptop in my car on the company parking lot with a Kali image, using hostap and freeradius-wpe configured with the company SSID. It was very easy to find out the mschapv2 challenge/responses of a number of android/windows phones that there just walking past my car. Also iPhone has a bad WPA2-enterprise implementation (see: http://research.edm.uhasselt.be/~bbonne/docs/robyns14wpa2enterprise.pdf), so bye bye WPA2-enterprise/PEAP-MSCHAPv2.
Wonder what other (large) companies are using for their BYOD wireless networks! EAP-TLS using certificate sounds like the only feasible option, however, we are afraid that the enrolment of certificates to the BYOD-clients will be a total disaster. I heard stories that some android phones lose their client certificate after a reboot :(

Certificate renewal with WPA2-Enterprise PEAP MS-CHAPv2

Hello
We have a wireless network which is secured with WPA2-Enterprise with PEAP and MS-CHAPv2. The Radius servers (Windows Server 2008r2 with the Radius Feature installed) currently use a public signed certificate. This is about to expire soon and will need to be renewed.
The clients are non-managed and from all variety (OS, wifi-software, ...).
The Wifi is 4400 controller based and managed with the new Prime Infrastructure 1.3.
What is the best way to do the renewal with as little disturbance for the client as possible? The less manual interaction for the end user the better.
Thanks
Patrick

Hello Patrick,
As per your query i can suggest you the following steps-
Since the root CA is the most critical CA in the hierarchy, you may prefer to have a strategy here that reduces the need to renew the root certificate often.
The first consideration is choosing the key length of the root's public key and private key pair during setup of the root authority. By using a long key length, which is generally more secure against brute force attack than a shorter key length, you increase the length of time that the CA can use the same private key and have reasonable confidence that it has not been compromised. The second consideration is establishing the validity period of the root certificate itself. In general, you will want to create a root certificate that has a shorter validity period than the estimated lifetime of the key.
For more information you can refer to the link-
http://technet.microsoft.com/en-us/library/cc740209(v=ws.10).aspx
Hope this will help you.

WPA2 Enterprise Authentication Without Certificate

Dear All,
I have Wifi Network, with WPA2 and Digital Certificate and EAP Protected EAP Authentication/Radius server Microsoft ISA
I have tryed with the last Wifi Pc driver to connect at the network, and I see that the PC connect using only the Username and password, without configure the Certificate on the Client!
After some Googleing I found that I should use the plus per-user certificates and EAP-TLS to solve the problem. It is true?
Best Regards,
Igor.

Hi ifabrizio
Might be a bit concerning that you are able to connect to the network using only user name and password!
EAP-TLS or PEAP solutions should be configured to leverage digital certificates for hardware trust identity.
"Authenticate as computer when computer information is available" to enable "Machine Authentication" AKA "Computer Authentication". Machine Authentication allows your PC to connect to the network by authenticating as "Computer" before a legitimate user logs in. This allows a machine to obtain group policies just like it was connected to a wired network and this is a unique feature of the Windows Client.
If you don't have "Machine Authentication", your Group Policy will not function and non-cached users cannot log on to your machine even if they are given the proper permissions at the Domain level. "Machine Authentication" is needed to recreate the full "Wired" experience. In order for "Machine Authentication" to work, PEAP only requires that a Computer is joined to the domain. The computer will use its "Computer Password" to log on to the network. Note that for EAP-TLS or PEAP-EAP-TLS (stronger alternatives to PEAP) to work the computer must have a "Machine Certificate" installed from the Enterprise Root CA.
Hope this helps.
Jay

How to replace self-signed certificate for enterprise manager console

Does anyone know how to change self-signed certificate for https access to Enterprise Manager console, which is issued during installation of Oracle 11g?

Well, this might not be much help, but for 10g, on AIX, docID 1171558.1 describes how to create a new certificate.
Not sure how relevant it will be for 11g, sorry :(

Support for WPA-Enterprise, WPA2-Enterprise wifi s...

hi all
I try to connect my phone to corporate wifi but failed because the phones hangs. my company uses WPA2-Enterprise wifi. my phone clearly works with WPA2-Personal wifi security at home. will these profiles of security be supported in future update?

Although this is the right section for this question, let us continue with your original post …

Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable.

Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable.
Thanks for your help!

Choose the strongest security available on your router, preferably WPA2 using AES encryption and a long complex passphrase with at least 14 characters (the maximum is 63 characters).

Migrate certificate for native installer packaged application

Hi,
I need to migrate certificate (to new certificate) for my air app, which is a native installer packaged application. The certification migration steps in the docs mention migrating/ signing the .air app with old and new certificate.
But it doesn't mention anything about the natively packaged air app (the .exe)
How to migrate / sign certificates for native installer ?
Thanks,
Brijesh

AIR run time :2.0.3.13070
Yes,I am using the old certificate for migration. However I noticed I was getting following error while migrating.
a) first I got the "Could not create time stamp: timestamp.geotrust.com" exception. I am completely unsure why this error. I didn't use timestamp while generating the old version of the app using the old certificate few days back (before old certificate expired).
b) then I tried to migrate using -tsa none option so that it could migrate to new air.
If this is causing the problem, I need to figure out why I get the timestamp error mentioned in (a)
Thanks,
Brijesh

Free RADIUS/802.1X Service for WPA/WPA2-Enterprise

Hi, just wanted to let everyone know that I recently started offering a Free Edition of our AuthenticateMyWiFi service, a hosted RADIUS/AAA service offering 802.1X authentication for use with WPA/WPA2-Enterprise encryption.
The Free Edition features 1 user account, supports 1 AP, and includes: PEAP authentication for wireless and wired connections, web-based control panel, and activity logging.
This is great for IT professionals wanting to experiment with 802.1X or to get enterprise Wi-Fi security in homes and small offices.
For more info visit our site:
http://www.nowiressecurity.com/service.htm
- Eric Geier

I recommend contacting Linksys support on the phone and ask them which model router has Radius or Enterprise WPA features. Some home class routers may not have this. Ask and see what is available.

Airport Express +WPA2 Enterprise, no place to enter username and pass for auth...

Airport Express version 7.6
Airport Utility 5.5.3
I want to use the Airport Express simply to bridge an Ethernet connection to wireless using WPA 2 Enterprise (Wireless network uses RADIUS authentication)
Wireless mode is set to "Join a wireless network"
Wireless Security is set to "WPA/WPA2 Enterprise"
Problem is that there is no place that I can find to enter the username and password for the Enterprise security.
Thanks

Airport Express version 7.6
Airport Utility 5.5.3
I want to use the Airport Express simply to bridge an Ethernet connection to wireless using WPA 2 Enterprise (Wireless network uses RADIUS authentication)
Wireless mode is set to "Join a wireless network"
Wireless Security is set to "WPA/WPA2 Enterprise"
Problem is that there is no place that I can find to enter the username and password for the Enterprise security.
Thanks

Installation of certificates for WPA2-Enterprise?

Similar Messages

Maybe you are looking for